cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

ste-nomadik-s8815.dts (3445B)

      1// SPDX-License-Identifier: GPL-2.0
      2/*
      3 * Device Tree for the ST-Ericsson Nomadik S8815 board
      4 * Produced by Calao Systems
      5 */
      6
      7/dts-v1/;
      8#include <dt-bindings/interrupt-controller/irq.h>
      9#include "ste-nomadik-stn8815.dtsi"
     10
     11/ {
     12	model = "Calao Systems USB-S8815";
     13	compatible = "calaosystems,usb-s8815";
     14
     15	chosen {
     16		bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
     17	};
     18
     19	aliases {
     20		serial0 = &uart0;
     21		serial1 = &uart1;
     22	};
     23
     24	gpio3: gpio@101e7000 {
     25		/* This hog will bias the MMC/SD card detect line */
     26		mmcsd-gpio {
     27			gpio-hog;
     28			gpios = <16 0x0>;
     29			output-low;
     30			line-name = "card detect bias";
     31		};
     32	};
     33
     34	src@101e0000 {
     35		/* These chrystal drivers are not used on this board */
     36		disable-sxtalo;
     37		disable-mxtalo;
     38	};
     39
     40	pinctrl {
     41		/* Hog CD pins */
     42		pinctrl-names = "default";
     43		pinctrl-0 = <&cd_default_mode>;
     44
     45		uart0 {
     46			/* Only use RX/TX pins */
     47			uart0_s8815_mode: uart0_mux {
     48				u0_default_mux {
     49					function = "u0";
     50					groups = "u0txrx_a_1";
     51				};
     52			};
     53		};
     54		mmcsd-cd {
     55			cd_default_mode: cd_default {
     56				cd_default_cfg1 {
     57					/* CD input GPIO */
     58					pins = "GPIO111_H21";
     59					ste,input = <0>;
     60				};
     61				cd_default_cfg2 {
     62					/* CD GPIO biasing */
     63					pins = "GPIO112_J21";
     64					ste,output = <0>;
     65				};
     66			};
     67		};
     68		gpioi2c {
     69			gpioi2c_default_mode: gpioi2c_default {
     70				gpioi2c_default_cfg {
     71					pins = "GPIO73_C21", "GPIO74_C20";
     72					ste,input = <0>;
     73				};
     74			};
     75		};
     76		user-led {
     77			user_led_default_mode: user_led_default {
     78				user_led_default_cfg {
     79					pins = "GPIO2_C5";
     80					ste,output = <1>;
     81				};
     82			};
     83		};
     84		user-button {
     85			user_button_default_mode: user_button_default {
     86				user_button_default_cfg {
     87					pins = "GPIO3_A4";
     88					ste,input = <0>;
     89				};
     90			};
     91		};
     92	};
     93
     94	/* Ethernet */
     95	external-bus@34000000 {
     96		compatible = "simple-bus";
     97		reg = <0x34000000 0x1000000>;
     98		#address-cells = <1>;
     99		#size-cells = <1>;
    100		ranges = <0 0x34000000 0x1000000>;
    101		ethernet@300 {
    102			compatible = "smsc,lan91c111";
    103			reg = <0x300 0x0fd00>;
    104			interrupt-parent = <&gpio3>;
    105			interrupts = <8 IRQ_TYPE_EDGE_RISING>;
    106		};
    107	};
    108
    109	i2c1 {
    110		lis3lv02dl@1d {
    111			/* Accelerometer */
    112			compatible = "st,lis3lv02dl-accel";
    113			reg = <0x1d>;
    114		};
    115	};
    116
    117	/* GPIO I2C connected to the USB portions of the STw4811 only */
    118	gpio-i2c {
    119		compatible = "i2c-gpio";
    120		gpios = <&gpio2 10 0>, /* sda */
    121			<&gpio2 9 0>; /* scl */
    122		#address-cells = <1>;
    123		#size-cells = <0>;
    124		pinctrl-names = "default";
    125		pinctrl-0 = <&gpioi2c_default_mode>;
    126
    127		stw4811@2d {
    128			   compatible = "st,stw4811-usb";
    129			   reg = <0x2d>;
    130		};
    131	};
    132
    133
    134	amba {
    135		/* Activate RXTX on UART 0 */
    136		uart0: uart@101fd000 {
    137			pinctrl-names = "default";
    138			pinctrl-0 = <&uart0_s8815_mode>;
    139			status = "okay";
    140		};
    141		/* Configure card detect for the uSD slot */
    142		mmc@101f6000 {
    143			cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
    144		};
    145	};
    146
    147	/* The user LED on the board is set up to be used for heartbeat */
    148	leds {
    149		compatible = "gpio-leds";
    150		user-led {
    151			label = "user_led";
    152			gpios = <&gpio0 2 0x1>;
    153			default-state = "off";
    154			linux,default-trigger = "heartbeat";
    155			pinctrl-names = "default";
    156			pinctrl-0 = <&user_led_default_mode>;
    157		};
    158	};
    159
    160	/* User key mapped in as "escape" */
    161	gpio-keys {
    162		compatible = "gpio-keys";
    163		user-button {
    164			label = "user_button";
    165			gpios = <&gpio0 3 0x1>;
    166			linux,code = <1>; /* KEY_ESC */
    167			wakeup-source;
    168			pinctrl-names = "default";
    169			pinctrl-0 = <&user_button_default_mode>;
    170		};
    171	};
    172};