cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

sun4i-a10-mini-xplus.dts (3379B)

      1/*
      2 * Copyright 2012 Maxime Ripard
      3 *
      4 * Maxime Ripard <maxime.ripard@free-electrons.com>
      5 *
      6 * This file is dual-licensed: you can use it either under the terms
      7 * of the GPL or the X11 license, at your option. Note that this dual
      8 * licensing only applies to this file, and not this project as a
      9 * whole.
     10 *
     11 *  a) This file is free software; you can redistribute it and/or
     12 *     modify it under the terms of the GNU General Public License as
     13 *     published by the Free Software Foundation; either version 2 of the
     14 *     License, or (at your option) any later version.
     15 *
     16 *     This file is distributed in the hope that it will be useful,
     17 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
     18 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     19 *     GNU General Public License for more details.
     20 *
     21 * Or, alternatively,
     22 *
     23 *  b) Permission is hereby granted, free of charge, to any person
     24 *     obtaining a copy of this software and associated documentation
     25 *     files (the "Software"), to deal in the Software without
     26 *     restriction, including without limitation the rights to use,
     27 *     copy, modify, merge, publish, distribute, sublicense, and/or
     28 *     sell copies of the Software, and to permit persons to whom the
     29 *     Software is furnished to do so, subject to the following
     30 *     conditions:
     31 *
     32 *     The above copyright notice and this permission notice shall be
     33 *     included in all copies or substantial portions of the Software.
     34 *
     35 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
     36 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
     37 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
     38 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
     39 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
     40 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
     41 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
     42 *     OTHER DEALINGS IN THE SOFTWARE.
     43 */
     44
     45/dts-v1/;
     46#include "sun4i-a10.dtsi"
     47#include "sunxi-common-regulators.dtsi"
     48
     49#include <dt-bindings/gpio/gpio.h>
     50
     51/ {
     52	model = "PineRiver Mini X-Plus";
     53	compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
     54
     55	aliases {
     56		serial0 = &uart0;
     57	};
     58
     59	chosen {
     60		stdout-path = "serial0:115200n8";
     61	};
     62};
     63
     64&ehci0 {
     65	status = "okay";
     66};
     67
     68&ehci1 {
     69	status = "okay";
     70};
     71
     72&i2c0 {
     73	status = "okay";
     74
     75	axp209: pmic@34 {
     76		compatible = "x-powers,axp209";
     77		reg = <0x34>;
     78		interrupts = <0>;
     79
     80		interrupt-controller;
     81		#interrupt-cells = <1>;
     82	};
     83};
     84
     85&ir0 {
     86	pinctrl-names = "default";
     87	pinctrl-0 = <&ir0_rx_pins>;
     88	status = "okay";
     89};
     90
     91&ir0_rx_pins {
     92	/* The ir receiver is not always populated */
     93	bias-pull-up;
     94};
     95
     96&mmc0 {
     97	vmmc-supply = <&reg_vcc3v3>;
     98	bus-width = <4>;
     99	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
    100	status = "okay";
    101};
    102
    103&ohci0 {
    104	status = "okay";
    105};
    106
    107&ohci1 {
    108	status = "okay";
    109};
    110
    111&otg_sram {
    112	status = "okay";
    113};
    114
    115&reg_usb0_vbus {
    116	regulator-boot-on;
    117	status = "okay";
    118};
    119
    120&reg_usb1_vbus {
    121	status = "okay";
    122};
    123
    124&reg_usb2_vbus {
    125	status = "okay";
    126};
    127
    128&uart0 {
    129	pinctrl-names = "default";
    130	pinctrl-0 = <&uart0_pb_pins>;
    131	status = "okay";
    132};
    133
    134&usb_otg {
    135	dr_mode = "host";
    136	status = "okay";
    137};
    138
    139&usbphy {
    140	usb0_vbus-supply = <&reg_usb0_vbus>;
    141	usb1_vbus-supply = <&reg_usb1_vbus>;
    142	usb2_vbus-supply = <&reg_usb2_vbus>;
    143	status = "okay";
    144};