sun5i-a13-hsg-h702.dts (4163B)
1/* 2 * Copyright 2014 Chen-Yu Tsai <wens@csie.org> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43/dts-v1/; 44#include "sun5i-a13.dtsi" 45#include "sunxi-common-regulators.dtsi" 46 47#include <dt-bindings/gpio/gpio.h> 48#include <dt-bindings/input/input.h> 49 50/ { 51 model = "HSG H702"; 52 compatible = "hsg,h702", "allwinner,sun5i-a13"; 53 54 aliases { 55 serial0 = &uart1; 56 }; 57 58 chosen { 59 stdout-path = "serial0:115200n8"; 60 }; 61}; 62 63&cpu0 { 64 cpu-supply = <®_dcdc2>; 65}; 66 67&ehci0 { 68 status = "okay"; 69}; 70 71&i2c0 { 72 status = "okay"; 73 74 axp209: pmic@34 { 75 reg = <0x34>; 76 interrupts = <0>; 77 }; 78}; 79 80&i2c1 { 81 status = "okay"; 82 83 pcf8563: rtc@51 { 84 compatible = "nxp,pcf8563"; 85 reg = <0x51>; 86 }; 87}; 88 89&i2c2 { 90 status = "okay"; 91}; 92 93&lradc { 94 vref-supply = <®_ldo2>; 95 status = "okay"; 96 97 button-200 { 98 label = "Volume Up"; 99 linux,code = <KEY_VOLUMEUP>; 100 channel = <0>; 101 voltage = <200000>; 102 }; 103 104 button-400 { 105 label = "Volume Down"; 106 linux,code = <KEY_VOLUMEDOWN>; 107 channel = <0>; 108 voltage = <400000>; 109 }; 110}; 111 112&mmc0 { 113 vmmc-supply = <®_vcc3v3>; 114 bus-width = <4>; 115 cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ 116 status = "okay"; 117}; 118 119&ohci0 { 120 status = "okay"; 121}; 122 123&otg_sram { 124 status = "okay"; 125}; 126 127#include "axp209.dtsi" 128 129®_dcdc2 { 130 regulator-always-on; 131 regulator-min-microvolt = <1000000>; 132 regulator-max-microvolt = <1500000>; 133 regulator-name = "vdd-cpu"; 134}; 135 136®_dcdc3 { 137 regulator-always-on; 138 regulator-min-microvolt = <1000000>; 139 regulator-max-microvolt = <1400000>; 140 regulator-name = "vdd-int-dll"; 141}; 142 143®_ldo1 { 144 regulator-name = "vdd-rtc"; 145}; 146 147®_ldo2 { 148 regulator-always-on; 149 regulator-min-microvolt = <3000000>; 150 regulator-max-microvolt = <3000000>; 151 regulator-name = "avcc"; 152}; 153 154®_ldo3 { 155 regulator-min-microvolt = <3300000>; 156 regulator-max-microvolt = <3300000>; 157 regulator-name = "vcc-wifi"; 158}; 159 160®_usb0_vbus { 161 gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ 162 status = "okay"; 163}; 164 165&uart1 { 166 pinctrl-names = "default"; 167 pinctrl-0 = <&uart1_pg_pins>; 168 status = "okay"; 169}; 170 171&usb_otg { 172 dr_mode = "otg"; 173 status = "okay"; 174}; 175 176&usbphy { 177 usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */ 178 usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ 179 usb0_vbus-supply = <®_usb0_vbus>; 180 usb1_vbus-supply = <®_ldo3>; 181 status = "okay"; 182};