cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

sunxi-h3-h5-emlid-neutis.dtsi (2627B)

      1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
      2/*
      3 * DTSI for Emlid Neutis SoMs.
      4 *
      5 * Copyright (C) 2019 Georgii Staroselskii <georgii.staroselskii@emlid.com>
      6 */
      7
      8#include "sunxi-common-regulators.dtsi"
      9
     10#include <dt-bindings/gpio/gpio.h>
     11
     12/ {
     13	aliases {
     14		serial0 = &uart0;
     15	};
     16
     17	chosen {
     18		stdout-path = "serial0:115200n8";
     19	};
     20
     21	wifi_pwrseq: wifi_pwrseq {
     22		compatible = "mmc-pwrseq-simple";
     23		reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
     24		post-power-on-delay-ms = <200>;
     25		clocks = <&rtc 1>;
     26		clock-names = "ext_clock";
     27	};
     28};
     29
     30&cpu0 {
     31	cpu-supply = <&vdd_cpux>;
     32};
     33
     34&reg_usb0_vbus {
     35	gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;   /* PL9 */
     36	status = "okay";
     37};
     38
     39
     40&de {
     41	status = "okay";
     42};
     43
     44&ohci0 {
     45	status = "okay";
     46};
     47
     48&ohci1 {
     49	status = "okay";
     50};
     51
     52&ohci2 {
     53	status = "okay";
     54};
     55
     56&ohci3 {
     57	status = "okay";
     58};
     59
     60
     61&ehci0 {
     62	status = "okay";
     63};
     64
     65&ehci1 {
     66	status = "okay";
     67};
     68
     69&ehci2 {
     70	status = "okay";
     71};
     72
     73&ehci3 {
     74	status = "okay";
     75};
     76
     77&mmc0 {
     78	vmmc-supply = <&reg_vcc3v3>;
     79	bus-width = <4>;
     80	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
     81	status = "okay";
     82};
     83
     84
     85&mmc1 {
     86	vmmc-supply = <&reg_vcc3v3>;
     87	vqmmc-supply = <&reg_vcc3v3>;
     88	mmc-pwrseq = <&wifi_pwrseq>;
     89	bus-width = <4>;
     90	non-removable;
     91	status = "okay";
     92
     93	brcmf: wifi@1 {
     94		reg = <1>;
     95		compatible = "brcm,bcm4329-fmac";
     96		interrupt-parent = <&r_pio>;
     97		interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>;	/* PL5 */
     98		interrupt-names = "host-wake";
     99	};
    100};
    101
    102&mmc2 {
    103	pinctrl-names = "default";
    104	pinctrl-0 = <&mmc2_8bit_pins>;
    105	vmmc-supply = <&reg_vcc3v3>;
    106	bus-width = <8>;
    107	non-removable;
    108	cap-mmc-hw-reset;
    109	status = "okay";
    110};
    111
    112&uart0 {
    113	pinctrl-names = "default";
    114	pinctrl-0 = <&uart0_pa_pins>;
    115	status = "okay";
    116};
    117
    118
    119&uart1 {
    120	pinctrl-names = "default";
    121	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
    122	uart-has-rtscts;
    123	status = "okay";
    124
    125	bluetooth {
    126		compatible = "brcm,bcm43438-bt";
    127		clocks = <&rtc 1>;
    128		clock-names = "lpo";
    129		vbat-supply = <&reg_vcc3v3>;
    130		vddio-supply = <&reg_vcc3v3>;
    131		shutdown-gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
    132		device-wakeup-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
    133	};
    134};
    135
    136&uart2 {
    137	pinctrl-names = "default";
    138	pinctrl-0 = <&uart2_pins>;
    139	status = "okay";
    140};
    141
    142&uart3 {
    143	pinctrl-names = "default";
    144	pinctrl-0 = <&uart3_pins>;
    145	status = "okay";
    146};
    147
    148&usbphy {
    149	usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
    150	usb0_vbus-supply = <&reg_usb0_vbus>;
    151	status = "okay";
    152};
    153
    154&usb_otg {
    155	dr_mode = "otg";
    156	status = "okay";
    157};
    158
    159&codec {
    160	allwinner,audio-routing =
    161		"Line Out", "LINEOUT",
    162		"LINEIN", "Line In",
    163		"MIC1", "Mic",
    164		"MIC2", "Mic",
    165		"Mic",  "MBIAS";
    166};
    167
    168&i2c0 {
    169	status = "okay";
    170};