cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

sunxi-libretech-all-h3-cc.dtsi (4072B)

      1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
      2/*
      3 * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
      4 */
      5
      6#include <dt-bindings/gpio/gpio.h>
      7#include <dt-bindings/input/input.h>
      8
      9/ {
     10	aliases {
     11		ethernet0 = &emac;
     12		serial0 = &uart0;
     13	};
     14
     15	chosen {
     16		stdout-path = "serial0:115200n8";
     17	};
     18
     19	connector {
     20		compatible = "hdmi-connector";
     21		type = "a";
     22
     23		port {
     24			hdmi_con_in: endpoint {
     25				remote-endpoint = <&hdmi_out_con>;
     26			};
     27		};
     28	};
     29
     30	leds {
     31		compatible = "gpio-leds";
     32
     33		pwr_led {
     34			label = "librecomputer:green:pwr";
     35			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
     36			default-state = "on";
     37		};
     38
     39		status_led {
     40			label = "librecomputer:blue:status";
     41			gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
     42		};
     43	};
     44
     45	gpio_keys {
     46		compatible = "gpio-keys";
     47
     48		power {
     49			label = "power";
     50			linux,code = <KEY_POWER>;
     51			gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
     52			wakeup-source;
     53		};
     54	};
     55
     56	reg_vcc1v2: vcc1v2 {
     57		compatible = "regulator-fixed";
     58		regulator-name = "vcc1v2";
     59		regulator-min-microvolt = <1200000>;
     60		regulator-max-microvolt = <1200000>;
     61		regulator-always-on;
     62		regulator-boot-on;
     63		vin-supply = <&reg_vcc5v0>;
     64		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
     65		enable-active-high;
     66	};
     67
     68	reg_vcc3v3: vcc3v3 {
     69		compatible = "regulator-fixed";
     70		regulator-name = "vcc3v3";
     71		regulator-min-microvolt = <3300000>;
     72		regulator-max-microvolt = <3300000>;
     73		vin-supply = <&reg_vcc5v0>;
     74	};
     75
     76	/* This represents the board's 5V input */
     77	reg_vcc5v0: vcc5v0 {
     78		compatible = "regulator-fixed";
     79		regulator-name = "vcc5v0";
     80		regulator-min-microvolt = <5000000>;
     81		regulator-max-microvolt = <5000000>;
     82	};
     83
     84	reg_vcc_dram: vcc-dram {
     85		compatible = "regulator-fixed";
     86		regulator-name = "vcc-dram";
     87		regulator-min-microvolt = <1500000>;
     88		regulator-max-microvolt = <1500000>;
     89		regulator-always-on;
     90		regulator-boot-on;
     91		vin-supply = <&reg_vcc5v0>;
     92		gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
     93		enable-active-high;
     94	};
     95
     96	reg_vcc_io: vcc-io {
     97		compatible = "regulator-fixed";
     98		regulator-name = "vcc-io";
     99		regulator-min-microvolt = <3300000>;
    100		regulator-max-microvolt = <3300000>;
    101		regulator-always-on;
    102		regulator-boot-on;
    103		vin-supply = <&reg_vcc3v3>;
    104		gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
    105	};
    106
    107	reg_vdd_cpux: vdd-cpux {
    108		compatible = "regulator-fixed";
    109		regulator-name = "vdd-cpux";
    110		regulator-min-microvolt = <1200000>;
    111		regulator-max-microvolt = <1200000>;
    112		regulator-always-on;
    113		regulator-boot-on;
    114		vin-supply = <&reg_vcc5v0>;
    115		gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
    116		enable-active-high;
    117	};
    118};
    119
    120&codec {
    121	allwinner,audio-routing =
    122		"Line Out", "LINEOUT",
    123		"MIC1", "Mic",
    124		"Mic",  "MBIAS";
    125	status = "okay";
    126};
    127
    128&cpu0 {
    129	cpu-supply = <&reg_vdd_cpux>;
    130};
    131
    132&cpu1 {
    133	cpu-supply = <&reg_vdd_cpux>;
    134};
    135
    136&cpu2 {
    137	cpu-supply = <&reg_vdd_cpux>;
    138};
    139
    140&cpu3 {
    141	cpu-supply = <&reg_vdd_cpux>;
    142};
    143
    144&de {
    145	status = "okay";
    146};
    147
    148&ehci0 {
    149	status = "okay";
    150};
    151
    152&ehci1 {
    153	status = "okay";
    154};
    155
    156&ehci2 {
    157	status = "okay";
    158};
    159
    160&ehci3 {
    161	status = "okay";
    162};
    163
    164&emac {
    165	phy-handle = <&int_mii_phy>;
    166	phy-mode = "mii";
    167	allwinner,leds-active-low;
    168	status = "okay";
    169};
    170
    171&hdmi {
    172	status = "okay";
    173};
    174
    175&hdmi_out {
    176	hdmi_out_con: endpoint {
    177		remote-endpoint = <&hdmi_con_in>;
    178	};
    179};
    180
    181&ir {
    182	pinctrl-names = "default";
    183	pinctrl-0 = <&r_ir_rx_pin>;
    184	status = "okay";
    185};
    186
    187&mmc0 {
    188	vmmc-supply = <&reg_vcc_io>;
    189	bus-width = <4>;
    190	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
    191	status = "okay";
    192};
    193
    194&mmc2 {
    195	pinctrl-names = "default";
    196	pinctrl-0 = <&mmc2_8bit_pins>;
    197	vmmc-supply = <&reg_vcc_io>;
    198	bus-width = <8>;
    199	non-removable;
    200	status = "okay";
    201};
    202
    203&ohci0 {
    204	status = "okay";
    205};
    206
    207&ohci1 {
    208	status = "okay";
    209};
    210
    211&ohci2 {
    212	status = "okay";
    213};
    214
    215&ohci3 {
    216	status = "okay";
    217};
    218
    219&uart0 {
    220	pinctrl-names = "default";
    221	pinctrl-0 = <&uart0_pa_pins>;
    222	status = "okay";
    223};
    224
    225&usb_otg {
    226	dr_mode = "host";
    227	status = "okay";
    228};
    229
    230&usbphy {
    231	/* VBUS on USB ports are always on */
    232	usb0_vbus-supply = <&reg_vcc5v0>;
    233	usb1_vbus-supply = <&reg_vcc5v0>;
    234	usb2_vbus-supply = <&reg_vcc5v0>;
    235	usb3_vbus-supply = <&reg_vcc5v0>;
    236	status = "okay";
    237};