cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

tegra124-apalis-v1.2-eval.dts (4902B)


      1// SPDX-License-Identifier: GPL-2.0 OR MIT
      2/*
      3 * Copyright 2016-2018 Toradex AG
      4 */
      5
      6/dts-v1/;
      7
      8#include <dt-bindings/input/input.h>
      9#include "tegra124-apalis-v1.2.dtsi"
     10
     11/ {
     12	model = "Toradex Apalis TK1 on Apalis Evaluation Board";
     13	compatible = "toradex,apalis-tk1-v1.2-eval", "toradex,apalis-tk1-eval",
     14		     "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1",
     15		     "nvidia,tegra124";
     16
     17	aliases {
     18		rtc0 = "/i2c@7000c000/rtc@68";
     19		rtc1 = "/i2c@7000d000/pmic@40";
     20		rtc2 = "/rtc@7000e000";
     21		serial0 = &uarta;
     22		serial1 = &uartb;
     23		serial2 = &uartc;
     24		serial3 = &uartd;
     25	};
     26
     27	chosen {
     28		stdout-path = "serial0:115200n8";
     29	};
     30
     31	pcie@1003000 {
     32		pci@1,0 {
     33			status = "okay";
     34		};
     35	};
     36
     37	host1x@50000000 {
     38		hdmi@54280000 {
     39			status = "okay";
     40			hdmi-supply = <&reg_5v0>;
     41		};
     42	};
     43
     44	/* Apalis UART1 */
     45	serial@70006000 {
     46		status = "okay";
     47	};
     48
     49	/* Apalis UART2 */
     50	serial@70006040 {
     51		status = "okay";
     52	};
     53
     54	/* Apalis UART3 */
     55	serial@70006200 {
     56		status = "okay";
     57	};
     58
     59	/* Apalis UART4 */
     60	serial@70006300 {
     61		status = "okay";
     62	};
     63
     64	pwm@7000a000 {
     65		status = "okay";
     66	};
     67
     68	/*
     69	 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
     70	 * board)
     71	 */
     72	i2c@7000c000 {
     73		status = "okay";
     74		clock-frequency = <400000>;
     75
     76		pcie-switch@58 {
     77			compatible = "plx,pex8605";
     78			reg = <0x58>;
     79		};
     80
     81		/* M41T0M6 real time clock on carrier board */
     82		rtc@68 {
     83			compatible = "st,m41t0";
     84			reg = <0x68>;
     85		};
     86	};
     87
     88	/* GEN2_I2C: unused */
     89
     90	/*
     91	 * CAM_I2C: I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor
     92	 * on carrier board)
     93	 */
     94	i2c@7000c500 {
     95		status = "okay";
     96		clock-frequency = <400000>;
     97	};
     98
     99	/*
    100	 * I2C4 (DDC): I2C4_SDA/SCL (DDC) on MXM3 pin 205/207
    101	 * (e.g. display EDID)
    102	 */
    103	i2c@7000c700 {
    104		status = "okay";
    105	};
    106
    107	/* SPI1: Apalis SPI1 */
    108	spi@7000d400 {
    109		status = "okay";
    110		spi-max-frequency = <50000000>;
    111	};
    112
    113	/* SPI4: Apalis SPI2 */
    114	spi@7000da00 {
    115		status = "okay";
    116		spi-max-frequency = <50000000>;
    117	};
    118
    119	/* Apalis Serial ATA */
    120	sata@70020000 {
    121		status = "okay";
    122		target-5v-supply = <&reg_5v0>;
    123		target-12v-supply = <&reg_12v0>;
    124	};
    125
    126	hda@70030000 {
    127		status = "okay";
    128	};
    129
    130	usb@70090000 {
    131		status = "okay";
    132	};
    133
    134	/* Apalis MMC1 */
    135	mmc@700b0000 {
    136		status = "okay";
    137		bus-width = <4>;
    138		/* MMC1_CD# */
    139		cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
    140		vqmmc-supply = <&vddio_sdmmc1>;
    141	};
    142
    143	/* Apalis SD1 */
    144	mmc@700b0400 {
    145		status = "okay";
    146		bus-width = <4>;
    147		/* SD1_CD# */
    148		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
    149		vqmmc-supply = <&vddio_sdmmc3>;
    150	};
    151
    152	/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
    153	usb@7d000000 {
    154		status = "okay";
    155		dr_mode = "otg";
    156	};
    157
    158	usb-phy@7d000000 {
    159		status = "okay";
    160		vbus-supply = <&reg_usbo1_vbus>;
    161	};
    162
    163	/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
    164	usb@7d004000 {
    165		status = "okay";
    166	};
    167
    168	usb-phy@7d004000 {
    169		status = "okay";
    170		vbus-supply = <&reg_usbh_vbus>;
    171	};
    172
    173	/* EHCI instance 2: USB3_DP/N -> USBH4_DP/N */
    174	usb@7d008000 {
    175		status = "okay";
    176	};
    177
    178	usb-phy@7d008000 {
    179		status = "okay";
    180		vbus-supply = <&reg_usbh_vbus>;
    181	};
    182
    183	backlight: backlight {
    184		compatible = "pwm-backlight";
    185		brightness-levels = <255 231 223 207 191 159 127 0>;
    186		default-brightness-level = <6>;
    187		/* BKL1_ON */
    188		enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
    189		power-supply = <&reg_3v3>;
    190		pwms = <&pwm 3 5000000>; /* BKL1_PWM */
    191	};
    192
    193	gpio-keys {
    194		compatible = "gpio-keys";
    195
    196		wakeup {
    197			label = "WAKE1_MICO";
    198			gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>;
    199			linux,code = <KEY_WAKEUP>;
    200			debounce-interval = <10>;
    201			wakeup-source;
    202		};
    203	};
    204
    205	reg_3v3: regulator-3v3 {
    206		compatible = "regulator-fixed";
    207		regulator-name = "3.3V_SW";
    208		regulator-min-microvolt = <3300000>;
    209		regulator-max-microvolt = <3300000>;
    210	};
    211
    212	reg_5v0: regulator-5v0 {
    213		compatible = "regulator-fixed";
    214		regulator-name = "5V_SW";
    215		regulator-min-microvolt = <5000000>;
    216		regulator-max-microvolt = <5000000>;
    217	};
    218
    219	reg_12v0: regulator-12v0 {
    220		compatible = "regulator-fixed";
    221		regulator-name = "12V_SW";
    222		regulator-min-microvolt = <12000000>;
    223		regulator-max-microvolt = <12000000>;
    224	};
    225
    226	/* USBO1_EN */
    227	reg_usbo1_vbus: regulator-usbo1-vbus {
    228		compatible = "regulator-fixed";
    229		regulator-name = "VCC_USBO1";
    230		regulator-min-microvolt = <5000000>;
    231		regulator-max-microvolt = <5000000>;
    232		gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
    233		enable-active-high;
    234		vin-supply = <&reg_5v0>;
    235	};
    236
    237	/* USBH_EN */
    238	reg_usbh_vbus: regulator-usbh-vbus {
    239		compatible = "regulator-fixed";
    240		regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
    241		regulator-min-microvolt = <5000000>;
    242		regulator-max-microvolt = <5000000>;
    243		gpio = <&gpio TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
    244		enable-active-high;
    245		vin-supply = <&reg_5v0>;
    246	};
    247};
    248
    249&gpio {
    250	/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
    251	pex-perst-n-hog {
    252		gpio-hog;
    253		gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
    254		output-high;
    255		line-name = "PEX_PERST_N";
    256	};
    257};