cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

twl4030_omap3.dtsi (1213B)

      1// SPDX-License-Identifier: GPL-2.0-only
      2/*
      3 * Copyright (C) 2013 Linaro, Ltd.
      4 */
      5
      6&twl {
      7	pinctrl-names = "default";
      8	pinctrl-0 = <&twl4030_pins &twl4030_vpins>;
      9};
     10
     11&omap3_pmx_core {
     12	/*
     13	 * On most OMAP3 platforms, the twl4030 IRQ line is connected
     14	 * to the SYS_NIRQ line on OMAP.  Therefore, configure the
     15	 * defaults for the SYS_NIRQ pin here.
     16	 */
     17	twl4030_pins: pinmux_twl4030_pins {
     18		pinctrl-single,pins = <
     19			OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* sys_nirq.sys_nirq */
     20		>;
     21	};
     22};
     23
     24/*
     25 * If your board is not using the I2C4 pins with twl4030, then don't include
     26 * this file. For proper idle mode signaling with sys_clkreq and sys_off_mode
     27 * pins we need to configure I2C4, or else use the legacy sys_nvmode1 and
     28 * sys_nvmode2 signaling.
     29 */
     30&omap3_pmx_wkup {
     31	twl4030_vpins: pinmux_twl4030_vpins {
     32		pinctrl-single,pins = <
     33			OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0)		/* i2c4_scl.i2c4_scl */
     34			OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0)		/* i2c4_sda.i2c4_sda */
     35			OMAP3_WKUP_IOPAD(0x2a06, PIN_OUTPUT | MUX_MODE0)	/* sys_clkreq.sys_clkreq */
     36			OMAP3_WKUP_IOPAD(0x2a18, PIN_OUTPUT | MUX_MODE0)	/* sys_off_mode.sys_off_mode */
     37		>;
     38	};
     39};