uniphier-pro4.dtsi (15128B)
1// SPDX-License-Identifier: GPL-2.0+ OR MIT 2// 3// Device Tree Source for UniPhier Pro4 SoC 4// 5// Copyright (C) 2015-2016 Socionext Inc. 6// Author: Masahiro Yamada <yamada.masahiro@socionext.com> 7 8#include <dt-bindings/gpio/uniphier-gpio.h> 9 10/ { 11 compatible = "socionext,uniphier-pro4"; 12 #address-cells = <1>; 13 #size-cells = <1>; 14 15 cpus { 16 #address-cells = <1>; 17 #size-cells = <0>; 18 19 cpu@0 { 20 device_type = "cpu"; 21 compatible = "arm,cortex-a9"; 22 reg = <0>; 23 enable-method = "psci"; 24 next-level-cache = <&l2>; 25 }; 26 27 cpu@1 { 28 device_type = "cpu"; 29 compatible = "arm,cortex-a9"; 30 reg = <1>; 31 enable-method = "psci"; 32 next-level-cache = <&l2>; 33 }; 34 }; 35 36 psci { 37 compatible = "arm,psci-0.2"; 38 method = "smc"; 39 }; 40 41 clocks { 42 refclk: ref { 43 compatible = "fixed-clock"; 44 #clock-cells = <0>; 45 clock-frequency = <25000000>; 46 }; 47 48 arm_timer_clk: arm-timer { 49 #clock-cells = <0>; 50 compatible = "fixed-clock"; 51 clock-frequency = <50000000>; 52 }; 53 }; 54 55 soc { 56 compatible = "simple-bus"; 57 #address-cells = <1>; 58 #size-cells = <1>; 59 ranges; 60 interrupt-parent = <&intc>; 61 62 l2: cache-controller@500c0000 { 63 compatible = "socionext,uniphier-system-cache"; 64 reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, 65 <0x506c0000 0x400>; 66 interrupts = <0 174 4>, <0 175 4>; 67 cache-unified; 68 cache-size = <(768 * 1024)>; 69 cache-sets = <256>; 70 cache-line-size = <128>; 71 cache-level = <2>; 72 }; 73 74 spi0: spi@54006000 { 75 compatible = "socionext,uniphier-scssi"; 76 status = "disabled"; 77 reg = <0x54006000 0x100>; 78 #address-cells = <1>; 79 #size-cells = <0>; 80 interrupts = <0 39 4>; 81 pinctrl-names = "default"; 82 pinctrl-0 = <&pinctrl_spi0>; 83 clocks = <&peri_clk 11>; 84 resets = <&peri_rst 11>; 85 }; 86 87 serial0: serial@54006800 { 88 compatible = "socionext,uniphier-uart"; 89 status = "disabled"; 90 reg = <0x54006800 0x40>; 91 interrupts = <0 33 4>; 92 pinctrl-names = "default"; 93 pinctrl-0 = <&pinctrl_uart0>; 94 clocks = <&peri_clk 0>; 95 resets = <&peri_rst 0>; 96 }; 97 98 serial1: serial@54006900 { 99 compatible = "socionext,uniphier-uart"; 100 status = "disabled"; 101 reg = <0x54006900 0x40>; 102 interrupts = <0 35 4>; 103 pinctrl-names = "default"; 104 pinctrl-0 = <&pinctrl_uart1>; 105 clocks = <&peri_clk 1>; 106 resets = <&peri_rst 1>; 107 }; 108 109 serial2: serial@54006a00 { 110 compatible = "socionext,uniphier-uart"; 111 status = "disabled"; 112 reg = <0x54006a00 0x40>; 113 interrupts = <0 37 4>; 114 pinctrl-names = "default"; 115 pinctrl-0 = <&pinctrl_uart2>; 116 clocks = <&peri_clk 2>; 117 resets = <&peri_rst 2>; 118 }; 119 120 serial3: serial@54006b00 { 121 compatible = "socionext,uniphier-uart"; 122 status = "disabled"; 123 reg = <0x54006b00 0x40>; 124 interrupts = <0 177 4>; 125 pinctrl-names = "default"; 126 pinctrl-0 = <&pinctrl_uart3>; 127 clocks = <&peri_clk 3>; 128 resets = <&peri_rst 3>; 129 }; 130 131 gpio: gpio@55000000 { 132 compatible = "socionext,uniphier-gpio"; 133 reg = <0x55000000 0x200>; 134 interrupt-parent = <&aidet>; 135 interrupt-controller; 136 #interrupt-cells = <2>; 137 gpio-controller; 138 #gpio-cells = <2>; 139 gpio-ranges = <&pinctrl 0 0 0>; 140 gpio-ranges-group-names = "gpio_range"; 141 ngpios = <248>; 142 socionext,interrupt-ranges = <0 48 16>, <16 154 5>; 143 }; 144 145 i2c0: i2c@58780000 { 146 compatible = "socionext,uniphier-fi2c"; 147 status = "disabled"; 148 reg = <0x58780000 0x80>; 149 #address-cells = <1>; 150 #size-cells = <0>; 151 interrupts = <0 41 4>; 152 pinctrl-names = "default"; 153 pinctrl-0 = <&pinctrl_i2c0>; 154 clocks = <&peri_clk 4>; 155 resets = <&peri_rst 4>; 156 clock-frequency = <100000>; 157 }; 158 159 i2c1: i2c@58781000 { 160 compatible = "socionext,uniphier-fi2c"; 161 status = "disabled"; 162 reg = <0x58781000 0x80>; 163 #address-cells = <1>; 164 #size-cells = <0>; 165 interrupts = <0 42 4>; 166 pinctrl-names = "default"; 167 pinctrl-0 = <&pinctrl_i2c1>; 168 clocks = <&peri_clk 5>; 169 resets = <&peri_rst 5>; 170 clock-frequency = <100000>; 171 }; 172 173 i2c2: i2c@58782000 { 174 compatible = "socionext,uniphier-fi2c"; 175 status = "disabled"; 176 reg = <0x58782000 0x80>; 177 #address-cells = <1>; 178 #size-cells = <0>; 179 interrupts = <0 43 4>; 180 pinctrl-names = "default"; 181 pinctrl-0 = <&pinctrl_i2c2>; 182 clocks = <&peri_clk 6>; 183 resets = <&peri_rst 6>; 184 clock-frequency = <100000>; 185 }; 186 187 i2c3: i2c@58783000 { 188 compatible = "socionext,uniphier-fi2c"; 189 status = "disabled"; 190 reg = <0x58783000 0x80>; 191 #address-cells = <1>; 192 #size-cells = <0>; 193 interrupts = <0 44 4>; 194 pinctrl-names = "default"; 195 pinctrl-0 = <&pinctrl_i2c3>; 196 clocks = <&peri_clk 7>; 197 resets = <&peri_rst 7>; 198 clock-frequency = <100000>; 199 }; 200 201 /* i2c4 does not exist */ 202 203 /* chip-internal connection for DMD */ 204 i2c5: i2c@58785000 { 205 compatible = "socionext,uniphier-fi2c"; 206 reg = <0x58785000 0x80>; 207 #address-cells = <1>; 208 #size-cells = <0>; 209 interrupts = <0 25 4>; 210 clocks = <&peri_clk 9>; 211 resets = <&peri_rst 9>; 212 clock-frequency = <400000>; 213 }; 214 215 /* chip-internal connection for HDMI */ 216 i2c6: i2c@58786000 { 217 compatible = "socionext,uniphier-fi2c"; 218 reg = <0x58786000 0x80>; 219 #address-cells = <1>; 220 #size-cells = <0>; 221 interrupts = <0 26 4>; 222 clocks = <&peri_clk 10>; 223 resets = <&peri_rst 10>; 224 clock-frequency = <400000>; 225 }; 226 227 system_bus: system-bus@58c00000 { 228 compatible = "socionext,uniphier-system-bus"; 229 status = "disabled"; 230 reg = <0x58c00000 0x400>; 231 #address-cells = <2>; 232 #size-cells = <1>; 233 pinctrl-names = "default"; 234 pinctrl-0 = <&pinctrl_system_bus>; 235 }; 236 237 smpctrl@59801000 { 238 compatible = "socionext,uniphier-smpctrl"; 239 reg = <0x59801000 0x400>; 240 }; 241 242 mioctrl@59810000 { 243 compatible = "socionext,uniphier-pro4-mioctrl", 244 "simple-mfd", "syscon"; 245 reg = <0x59810000 0x800>; 246 247 mio_clk: clock { 248 compatible = "socionext,uniphier-pro4-mio-clock"; 249 #clock-cells = <1>; 250 }; 251 252 mio_rst: reset { 253 compatible = "socionext,uniphier-pro4-mio-reset"; 254 #reset-cells = <1>; 255 }; 256 }; 257 258 perictrl@59820000 { 259 compatible = "socionext,uniphier-pro4-perictrl", 260 "simple-mfd", "syscon"; 261 reg = <0x59820000 0x200>; 262 263 peri_clk: clock { 264 compatible = "socionext,uniphier-pro4-peri-clock"; 265 #clock-cells = <1>; 266 }; 267 268 peri_rst: reset { 269 compatible = "socionext,uniphier-pro4-peri-reset"; 270 #reset-cells = <1>; 271 }; 272 }; 273 274 dmac: dma-controller@5a000000 { 275 compatible = "socionext,uniphier-mio-dmac"; 276 reg = <0x5a000000 0x1000>; 277 interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, 278 <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>; 279 clocks = <&mio_clk 7>; 280 resets = <&mio_rst 7>; 281 #dma-cells = <1>; 282 }; 283 284 sd: mmc@5a400000 { 285 compatible = "socionext,uniphier-sd-v2.91"; 286 status = "disabled"; 287 reg = <0x5a400000 0x200>; 288 interrupts = <0 76 4>; 289 pinctrl-names = "default", "uhs"; 290 pinctrl-0 = <&pinctrl_sd>; 291 pinctrl-1 = <&pinctrl_sd_uhs>; 292 clocks = <&mio_clk 0>; 293 reset-names = "host", "bridge"; 294 resets = <&mio_rst 0>, <&mio_rst 3>; 295 dma-names = "rx-tx"; 296 dmas = <&dmac 4>; 297 bus-width = <4>; 298 cap-sd-highspeed; 299 sd-uhs-sdr12; 300 sd-uhs-sdr25; 301 sd-uhs-sdr50; 302 }; 303 304 emmc: mmc@5a500000 { 305 compatible = "socionext,uniphier-sd-v2.91"; 306 status = "disabled"; 307 reg = <0x5a500000 0x200>; 308 interrupts = <0 78 4>; 309 pinctrl-names = "default"; 310 pinctrl-0 = <&pinctrl_emmc>; 311 clocks = <&mio_clk 1>; 312 reset-names = "host", "bridge", "hw"; 313 resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; 314 dma-names = "rx-tx"; 315 dmas = <&dmac 5>; 316 bus-width = <8>; 317 cap-mmc-highspeed; 318 cap-mmc-hw-reset; 319 non-removable; 320 }; 321 322 sd1: mmc@5a600000 { 323 compatible = "socionext,uniphier-sd-v2.91"; 324 status = "disabled"; 325 reg = <0x5a600000 0x200>; 326 interrupts = <0 85 4>; 327 pinctrl-names = "default"; 328 pinctrl-0 = <&pinctrl_sd1>; 329 clocks = <&mio_clk 2>; 330 reset-names = "host", "bridge"; 331 resets = <&mio_rst 2>, <&mio_rst 5>; 332 dma-names = "rx-tx"; 333 dmas = <&dmac 6>; 334 bus-width = <4>; 335 cap-sd-highspeed; 336 }; 337 338 usb2: usb@5a800100 { 339 compatible = "socionext,uniphier-ehci", "generic-ehci"; 340 status = "disabled"; 341 reg = <0x5a800100 0x100>; 342 interrupts = <0 80 4>; 343 pinctrl-names = "default"; 344 pinctrl-0 = <&pinctrl_usb2>; 345 clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>, 346 <&mio_clk 12>; 347 resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, 348 <&mio_rst 12>; 349 phy-names = "usb"; 350 phys = <&usb_phy0>; 351 has-transaction-translator; 352 }; 353 354 usb3: usb@5a810100 { 355 compatible = "socionext,uniphier-ehci", "generic-ehci"; 356 status = "disabled"; 357 reg = <0x5a810100 0x100>; 358 interrupts = <0 81 4>; 359 pinctrl-names = "default"; 360 pinctrl-0 = <&pinctrl_usb3>; 361 clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>, 362 <&mio_clk 13>; 363 resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, 364 <&mio_rst 13>; 365 phy-names = "usb"; 366 phys = <&usb_phy1>; 367 has-transaction-translator; 368 }; 369 370 soc_glue: soc-glue@5f800000 { 371 compatible = "socionext,uniphier-pro4-soc-glue", 372 "simple-mfd", "syscon"; 373 reg = <0x5f800000 0x2000>; 374 375 pinctrl: pinctrl { 376 compatible = "socionext,uniphier-pro4-pinctrl"; 377 }; 378 379 usb-phy { 380 compatible = "socionext,uniphier-pro4-usb2-phy"; 381 #address-cells = <1>; 382 #size-cells = <0>; 383 384 usb_phy0: phy@0 { 385 reg = <0>; 386 #phy-cells = <0>; 387 }; 388 389 usb_phy1: phy@1 { 390 reg = <1>; 391 #phy-cells = <0>; 392 }; 393 394 usb_phy2: phy@2 { 395 reg = <2>; 396 #phy-cells = <0>; 397 vbus-supply = <&usb0_vbus>; 398 }; 399 400 usb_phy3: phy@3 { 401 reg = <3>; 402 #phy-cells = <0>; 403 vbus-supply = <&usb1_vbus>; 404 }; 405 }; 406 }; 407 408 soc-glue@5f900000 { 409 compatible = "socionext,uniphier-pro4-soc-glue-debug", 410 "simple-mfd"; 411 #address-cells = <1>; 412 #size-cells = <1>; 413 ranges = <0 0x5f900000 0x2000>; 414 415 efuse@100 { 416 compatible = "socionext,uniphier-efuse"; 417 reg = <0x100 0x28>; 418 }; 419 420 efuse@130 { 421 compatible = "socionext,uniphier-efuse"; 422 reg = <0x130 0x8>; 423 }; 424 425 efuse@200 { 426 compatible = "socionext,uniphier-efuse"; 427 reg = <0x200 0x14>; 428 }; 429 }; 430 431 xdmac: dma-controller@5fc10000 { 432 compatible = "socionext,uniphier-xdmac"; 433 reg = <0x5fc10000 0x5300>; 434 interrupts = <0 188 4>; 435 dma-channels = <16>; 436 #dma-cells = <2>; 437 }; 438 439 aidet: interrupt-controller@5fc20000 { 440 compatible = "socionext,uniphier-pro4-aidet"; 441 reg = <0x5fc20000 0x200>; 442 interrupt-controller; 443 #interrupt-cells = <2>; 444 }; 445 446 timer@60000200 { 447 compatible = "arm,cortex-a9-global-timer"; 448 reg = <0x60000200 0x20>; 449 interrupts = <1 11 0x304>; 450 clocks = <&arm_timer_clk>; 451 }; 452 453 timer@60000600 { 454 compatible = "arm,cortex-a9-twd-timer"; 455 reg = <0x60000600 0x20>; 456 interrupts = <1 13 0x304>; 457 clocks = <&arm_timer_clk>; 458 }; 459 460 intc: interrupt-controller@60001000 { 461 compatible = "arm,cortex-a9-gic"; 462 reg = <0x60001000 0x1000>, 463 <0x60000100 0x100>; 464 #interrupt-cells = <3>; 465 interrupt-controller; 466 }; 467 468 sysctrl@61840000 { 469 compatible = "socionext,uniphier-pro4-sysctrl", 470 "simple-mfd", "syscon"; 471 reg = <0x61840000 0x10000>; 472 473 sys_clk: clock { 474 compatible = "socionext,uniphier-pro4-clock"; 475 #clock-cells = <1>; 476 }; 477 478 sys_rst: reset { 479 compatible = "socionext,uniphier-pro4-reset"; 480 #reset-cells = <1>; 481 }; 482 }; 483 484 eth: ethernet@65000000 { 485 compatible = "socionext,uniphier-pro4-ave4"; 486 status = "disabled"; 487 reg = <0x65000000 0x8500>; 488 interrupts = <0 66 4>; 489 pinctrl-names = "default"; 490 pinctrl-0 = <&pinctrl_ether_rgmii>; 491 clock-names = "gio", "ether", "ether-gb", "ether-phy"; 492 clocks = <&sys_clk 12>, <&sys_clk 6>, <&sys_clk 7>, 493 <&sys_clk 10>; 494 reset-names = "gio", "ether"; 495 resets = <&sys_rst 12>, <&sys_rst 6>; 496 phy-mode = "rgmii"; 497 local-mac-address = [00 00 00 00 00 00]; 498 socionext,syscon-phy-mode = <&soc_glue 0>; 499 500 mdio: mdio { 501 #address-cells = <1>; 502 #size-cells = <0>; 503 }; 504 }; 505 506 usb0: usb@65a00000 { 507 compatible = "socionext,uniphier-dwc3", "snps,dwc3"; 508 status = "disabled"; 509 reg = <0x65a00000 0xcd00>; 510 interrupt-names = "host", "peripheral"; 511 interrupts = <0 134 4>, <0 135 4>; 512 pinctrl-names = "default"; 513 pinctrl-0 = <&pinctrl_usb0>; 514 clock-names = "ref", "bus_early", "suspend"; 515 clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; 516 resets = <&usb0_rst 4>; 517 phys = <&usb_phy2>, <&usb0_ssphy>; 518 dr_mode = "host"; 519 }; 520 521 usb-glue@65b00000 { 522 compatible = "socionext,uniphier-pro4-dwc3-glue", 523 "simple-mfd"; 524 #address-cells = <1>; 525 #size-cells = <1>; 526 ranges = <0 0x65b00000 0x100>; 527 528 usb0_vbus: regulator@0 { 529 compatible = "socionext,uniphier-pro4-usb3-regulator"; 530 reg = <0 0x10>; 531 clock-names = "gio", "link"; 532 clocks = <&sys_clk 12>, <&sys_clk 14>; 533 reset-names = "gio", "link"; 534 resets = <&sys_rst 12>, <&sys_rst 14>; 535 }; 536 537 usb0_ssphy: ss-phy@10 { 538 compatible = "socionext,uniphier-pro4-usb3-ssphy"; 539 reg = <0x10 0x10>; 540 #phy-cells = <0>; 541 clock-names = "gio", "link"; 542 clocks = <&sys_clk 12>, <&sys_clk 14>; 543 reset-names = "gio", "link"; 544 resets = <&sys_rst 12>, <&sys_rst 14>; 545 vbus-supply = <&usb0_vbus>; 546 }; 547 548 usb0_rst: reset@40 { 549 compatible = "socionext,uniphier-pro4-usb3-reset"; 550 reg = <0x40 0x4>; 551 #reset-cells = <1>; 552 clock-names = "gio", "link"; 553 clocks = <&sys_clk 12>, <&sys_clk 14>; 554 reset-names = "gio", "link"; 555 resets = <&sys_rst 12>, <&sys_rst 14>; 556 }; 557 }; 558 559 usb1: usb@65c00000 { 560 compatible = "socionext,uniphier-dwc3", "snps,dwc3"; 561 status = "disabled"; 562 reg = <0x65c00000 0xcd00>; 563 interrupt-names = "host", "peripheral"; 564 interrupts = <0 137 4>, <0 138 4>; 565 pinctrl-names = "default"; 566 pinctrl-0 = <&pinctrl_usb1>; 567 clock-names = "ref", "bus_early", "suspend"; 568 clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; 569 resets = <&usb1_rst 4>; 570 phys = <&usb_phy3>; 571 dr_mode = "host"; 572 }; 573 574 usb-glue@65d00000 { 575 compatible = "socionext,uniphier-pro4-dwc3-glue", 576 "simple-mfd"; 577 #address-cells = <1>; 578 #size-cells = <1>; 579 ranges = <0 0x65d00000 0x100>; 580 581 usb1_vbus: regulator@0 { 582 compatible = "socionext,uniphier-pro4-usb3-regulator"; 583 reg = <0 0x10>; 584 clock-names = "gio", "link"; 585 clocks = <&sys_clk 12>, <&sys_clk 15>; 586 reset-names = "gio", "link"; 587 resets = <&sys_rst 12>, <&sys_rst 15>; 588 }; 589 590 usb1_rst: reset@40 { 591 compatible = "socionext,uniphier-pro4-usb3-reset"; 592 reg = <0x40 0x4>; 593 #reset-cells = <1>; 594 clock-names = "gio", "link"; 595 clocks = <&sys_clk 12>, <&sys_clk 15>; 596 reset-names = "gio", "link"; 597 resets = <&sys_rst 12>, <&sys_rst 15>; 598 }; 599 }; 600 601 nand: nand-controller@68000000 { 602 compatible = "socionext,uniphier-denali-nand-v5a"; 603 status = "disabled"; 604 reg-names = "nand_data", "denali_reg"; 605 reg = <0x68000000 0x20>, <0x68100000 0x1000>; 606 #address-cells = <1>; 607 #size-cells = <0>; 608 interrupts = <0 65 4>; 609 pinctrl-names = "default"; 610 pinctrl-0 = <&pinctrl_nand>; 611 clock-names = "nand", "nand_x", "ecc"; 612 clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; 613 reset-names = "nand", "reg"; 614 resets = <&sys_rst 2>, <&sys_rst 2>; 615 }; 616 }; 617}; 618 619#include "uniphier-pinctrl.dtsi"