uniphier-pxs2.dtsi (19138B)
1// SPDX-License-Identifier: GPL-2.0+ OR MIT 2// 3// Device Tree Source for UniPhier PXs2 SoC 4// 5// Copyright (C) 2015-2016 Socionext Inc. 6// Author: Masahiro Yamada <yamada.masahiro@socionext.com> 7 8#include <dt-bindings/gpio/uniphier-gpio.h> 9#include <dt-bindings/thermal/thermal.h> 10 11/ { 12 compatible = "socionext,uniphier-pxs2"; 13 #address-cells = <1>; 14 #size-cells = <1>; 15 16 cpus { 17 #address-cells = <1>; 18 #size-cells = <0>; 19 20 cpu0: cpu@0 { 21 device_type = "cpu"; 22 compatible = "arm,cortex-a9"; 23 reg = <0>; 24 clocks = <&sys_clk 32>; 25 enable-method = "psci"; 26 next-level-cache = <&l2>; 27 operating-points-v2 = <&cpu_opp>; 28 #cooling-cells = <2>; 29 }; 30 31 cpu1: cpu@1 { 32 device_type = "cpu"; 33 compatible = "arm,cortex-a9"; 34 reg = <1>; 35 clocks = <&sys_clk 32>; 36 enable-method = "psci"; 37 next-level-cache = <&l2>; 38 operating-points-v2 = <&cpu_opp>; 39 #cooling-cells = <2>; 40 }; 41 42 cpu2: cpu@2 { 43 device_type = "cpu"; 44 compatible = "arm,cortex-a9"; 45 reg = <2>; 46 clocks = <&sys_clk 32>; 47 enable-method = "psci"; 48 next-level-cache = <&l2>; 49 operating-points-v2 = <&cpu_opp>; 50 #cooling-cells = <2>; 51 }; 52 53 cpu3: cpu@3 { 54 device_type = "cpu"; 55 compatible = "arm,cortex-a9"; 56 reg = <3>; 57 clocks = <&sys_clk 32>; 58 enable-method = "psci"; 59 next-level-cache = <&l2>; 60 operating-points-v2 = <&cpu_opp>; 61 #cooling-cells = <2>; 62 }; 63 }; 64 65 cpu_opp: opp-table { 66 compatible = "operating-points-v2"; 67 opp-shared; 68 69 opp-100000000 { 70 opp-hz = /bits/ 64 <100000000>; 71 clock-latency-ns = <300>; 72 }; 73 opp-150000000 { 74 opp-hz = /bits/ 64 <150000000>; 75 clock-latency-ns = <300>; 76 }; 77 opp-200000000 { 78 opp-hz = /bits/ 64 <200000000>; 79 clock-latency-ns = <300>; 80 }; 81 opp-300000000 { 82 opp-hz = /bits/ 64 <300000000>; 83 clock-latency-ns = <300>; 84 }; 85 opp-400000000 { 86 opp-hz = /bits/ 64 <400000000>; 87 clock-latency-ns = <300>; 88 }; 89 opp-600000000 { 90 opp-hz = /bits/ 64 <600000000>; 91 clock-latency-ns = <300>; 92 }; 93 opp-800000000 { 94 opp-hz = /bits/ 64 <800000000>; 95 clock-latency-ns = <300>; 96 }; 97 opp-1200000000 { 98 opp-hz = /bits/ 64 <1200000000>; 99 clock-latency-ns = <300>; 100 }; 101 }; 102 103 psci { 104 compatible = "arm,psci-0.2"; 105 method = "smc"; 106 }; 107 108 clocks { 109 refclk: ref { 110 compatible = "fixed-clock"; 111 #clock-cells = <0>; 112 clock-frequency = <25000000>; 113 }; 114 115 arm_timer_clk: arm-timer { 116 #clock-cells = <0>; 117 compatible = "fixed-clock"; 118 clock-frequency = <50000000>; 119 }; 120 }; 121 122 thermal-zones { 123 cpu-thermal { 124 polling-delay-passive = <250>; /* 250ms */ 125 polling-delay = <1000>; /* 1000ms */ 126 thermal-sensors = <&pvtctl>; 127 128 trips { 129 cpu_crit: cpu-crit { 130 temperature = <95000>; /* 95C */ 131 hysteresis = <2000>; 132 type = "critical"; 133 }; 134 cpu_alert: cpu-alert { 135 temperature = <85000>; /* 85C */ 136 hysteresis = <2000>; 137 type = "passive"; 138 }; 139 }; 140 141 cooling-maps { 142 map { 143 trip = <&cpu_alert>; 144 cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 145 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 146 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 147 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 148 }; 149 }; 150 }; 151 }; 152 153 soc { 154 compatible = "simple-bus"; 155 #address-cells = <1>; 156 #size-cells = <1>; 157 ranges; 158 interrupt-parent = <&intc>; 159 160 l2: cache-controller@500c0000 { 161 compatible = "socionext,uniphier-system-cache"; 162 reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, 163 <0x506c0000 0x400>; 164 interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>; 165 cache-unified; 166 cache-size = <(1280 * 1024)>; 167 cache-sets = <512>; 168 cache-line-size = <128>; 169 cache-level = <2>; 170 }; 171 172 spi0: spi@54006000 { 173 compatible = "socionext,uniphier-scssi"; 174 status = "disabled"; 175 reg = <0x54006000 0x100>; 176 #address-cells = <1>; 177 #size-cells = <0>; 178 interrupts = <0 39 4>; 179 pinctrl-names = "default"; 180 pinctrl-0 = <&pinctrl_spi0>; 181 clocks = <&peri_clk 11>; 182 resets = <&peri_rst 11>; 183 }; 184 185 spi1: spi@54006100 { 186 compatible = "socionext,uniphier-scssi"; 187 status = "disabled"; 188 reg = <0x54006100 0x100>; 189 #address-cells = <1>; 190 #size-cells = <0>; 191 interrupts = <0 216 4>; 192 pinctrl-names = "default"; 193 pinctrl-0 = <&pinctrl_spi1>; 194 clocks = <&peri_clk 12>; 195 resets = <&peri_rst 12>; 196 }; 197 198 serial0: serial@54006800 { 199 compatible = "socionext,uniphier-uart"; 200 status = "disabled"; 201 reg = <0x54006800 0x40>; 202 interrupts = <0 33 4>; 203 pinctrl-names = "default"; 204 pinctrl-0 = <&pinctrl_uart0>; 205 clocks = <&peri_clk 0>; 206 resets = <&peri_rst 0>; 207 }; 208 209 serial1: serial@54006900 { 210 compatible = "socionext,uniphier-uart"; 211 status = "disabled"; 212 reg = <0x54006900 0x40>; 213 interrupts = <0 35 4>; 214 pinctrl-names = "default"; 215 pinctrl-0 = <&pinctrl_uart1>; 216 clocks = <&peri_clk 1>; 217 resets = <&peri_rst 1>; 218 }; 219 220 serial2: serial@54006a00 { 221 compatible = "socionext,uniphier-uart"; 222 status = "disabled"; 223 reg = <0x54006a00 0x40>; 224 interrupts = <0 37 4>; 225 pinctrl-names = "default"; 226 pinctrl-0 = <&pinctrl_uart2>; 227 clocks = <&peri_clk 2>; 228 resets = <&peri_rst 2>; 229 }; 230 231 serial3: serial@54006b00 { 232 compatible = "socionext,uniphier-uart"; 233 status = "disabled"; 234 reg = <0x54006b00 0x40>; 235 interrupts = <0 177 4>; 236 pinctrl-names = "default"; 237 pinctrl-0 = <&pinctrl_uart3>; 238 clocks = <&peri_clk 3>; 239 resets = <&peri_rst 3>; 240 }; 241 242 gpio: gpio@55000000 { 243 compatible = "socionext,uniphier-gpio"; 244 reg = <0x55000000 0x200>; 245 interrupt-parent = <&aidet>; 246 interrupt-controller; 247 #interrupt-cells = <2>; 248 gpio-controller; 249 #gpio-cells = <2>; 250 gpio-ranges = <&pinctrl 0 0 0>, 251 <&pinctrl 96 0 0>; 252 gpio-ranges-group-names = "gpio_range0", 253 "gpio_range1"; 254 ngpios = <232>; 255 socionext,interrupt-ranges = <0 48 16>, <16 154 5>, 256 <21 217 3>; 257 }; 258 259 audio@56000000 { 260 compatible = "socionext,uniphier-pxs2-aio"; 261 reg = <0x56000000 0x80000>; 262 interrupts = <0 144 4>; 263 pinctrl-names = "default"; 264 pinctrl-0 = <&pinctrl_ain1>, 265 <&pinctrl_ain2>, 266 <&pinctrl_ainiec1>, 267 <&pinctrl_aout2>, 268 <&pinctrl_aout3>, 269 <&pinctrl_aoutiec1>, 270 <&pinctrl_aoutiec2>; 271 clock-names = "aio"; 272 clocks = <&sys_clk 40>; 273 reset-names = "aio"; 274 resets = <&sys_rst 40>; 275 #sound-dai-cells = <1>; 276 socionext,syscon = <&soc_glue>; 277 278 i2s_port0: port@0 { 279 i2s_hdmi: endpoint { 280 }; 281 }; 282 283 i2s_port1: port@1 { 284 i2s_line: endpoint { 285 }; 286 }; 287 288 i2s_port2: port@2 { 289 i2s_aux: endpoint { 290 }; 291 }; 292 293 spdif_port0: port@3 { 294 spdif_hiecout1: endpoint { 295 }; 296 }; 297 298 spdif_port1: port@4 { 299 spdif_iecout1: endpoint { 300 }; 301 }; 302 303 comp_spdif_port0: port@5 { 304 comp_spdif_hiecout1: endpoint { 305 }; 306 }; 307 308 comp_spdif_port1: port@6 { 309 comp_spdif_iecout1: endpoint { 310 }; 311 }; 312 }; 313 314 i2c0: i2c@58780000 { 315 compatible = "socionext,uniphier-fi2c"; 316 status = "disabled"; 317 reg = <0x58780000 0x80>; 318 #address-cells = <1>; 319 #size-cells = <0>; 320 interrupts = <0 41 4>; 321 pinctrl-names = "default"; 322 pinctrl-0 = <&pinctrl_i2c0>; 323 clocks = <&peri_clk 4>; 324 resets = <&peri_rst 4>; 325 clock-frequency = <100000>; 326 }; 327 328 i2c1: i2c@58781000 { 329 compatible = "socionext,uniphier-fi2c"; 330 status = "disabled"; 331 reg = <0x58781000 0x80>; 332 #address-cells = <1>; 333 #size-cells = <0>; 334 interrupts = <0 42 4>; 335 pinctrl-names = "default"; 336 pinctrl-0 = <&pinctrl_i2c1>; 337 clocks = <&peri_clk 5>; 338 resets = <&peri_rst 5>; 339 clock-frequency = <100000>; 340 }; 341 342 i2c2: i2c@58782000 { 343 compatible = "socionext,uniphier-fi2c"; 344 status = "disabled"; 345 reg = <0x58782000 0x80>; 346 #address-cells = <1>; 347 #size-cells = <0>; 348 interrupts = <0 43 4>; 349 pinctrl-names = "default"; 350 pinctrl-0 = <&pinctrl_i2c2>; 351 clocks = <&peri_clk 6>; 352 resets = <&peri_rst 6>; 353 clock-frequency = <100000>; 354 }; 355 356 i2c3: i2c@58783000 { 357 compatible = "socionext,uniphier-fi2c"; 358 status = "disabled"; 359 reg = <0x58783000 0x80>; 360 #address-cells = <1>; 361 #size-cells = <0>; 362 interrupts = <0 44 4>; 363 pinctrl-names = "default"; 364 pinctrl-0 = <&pinctrl_i2c3>; 365 clocks = <&peri_clk 7>; 366 resets = <&peri_rst 7>; 367 clock-frequency = <100000>; 368 }; 369 370 /* chip-internal connection for DMD */ 371 i2c4: i2c@58784000 { 372 compatible = "socionext,uniphier-fi2c"; 373 reg = <0x58784000 0x80>; 374 #address-cells = <1>; 375 #size-cells = <0>; 376 interrupts = <0 45 4>; 377 clocks = <&peri_clk 8>; 378 resets = <&peri_rst 8>; 379 clock-frequency = <400000>; 380 }; 381 382 /* chip-internal connection for STM */ 383 i2c5: i2c@58785000 { 384 compatible = "socionext,uniphier-fi2c"; 385 reg = <0x58785000 0x80>; 386 #address-cells = <1>; 387 #size-cells = <0>; 388 interrupts = <0 25 4>; 389 clocks = <&peri_clk 9>; 390 resets = <&peri_rst 9>; 391 clock-frequency = <400000>; 392 }; 393 394 /* chip-internal connection for HDMI */ 395 i2c6: i2c@58786000 { 396 compatible = "socionext,uniphier-fi2c"; 397 reg = <0x58786000 0x80>; 398 #address-cells = <1>; 399 #size-cells = <0>; 400 interrupts = <0 26 4>; 401 clocks = <&peri_clk 10>; 402 resets = <&peri_rst 10>; 403 clock-frequency = <400000>; 404 }; 405 406 system_bus: system-bus@58c00000 { 407 compatible = "socionext,uniphier-system-bus"; 408 status = "disabled"; 409 reg = <0x58c00000 0x400>; 410 #address-cells = <2>; 411 #size-cells = <1>; 412 pinctrl-names = "default"; 413 pinctrl-0 = <&pinctrl_system_bus>; 414 }; 415 416 smpctrl@59801000 { 417 compatible = "socionext,uniphier-smpctrl"; 418 reg = <0x59801000 0x400>; 419 }; 420 421 sdctrl@59810000 { 422 compatible = "socionext,uniphier-pxs2-sdctrl", 423 "simple-mfd", "syscon"; 424 reg = <0x59810000 0x400>; 425 426 sd_clk: clock { 427 compatible = "socionext,uniphier-pxs2-sd-clock"; 428 #clock-cells = <1>; 429 }; 430 431 sd_rst: reset { 432 compatible = "socionext,uniphier-pxs2-sd-reset"; 433 #reset-cells = <1>; 434 }; 435 }; 436 437 perictrl@59820000 { 438 compatible = "socionext,uniphier-pxs2-perictrl", 439 "simple-mfd", "syscon"; 440 reg = <0x59820000 0x200>; 441 442 peri_clk: clock { 443 compatible = "socionext,uniphier-pxs2-peri-clock"; 444 #clock-cells = <1>; 445 }; 446 447 peri_rst: reset { 448 compatible = "socionext,uniphier-pxs2-peri-reset"; 449 #reset-cells = <1>; 450 }; 451 }; 452 453 emmc: mmc@5a000000 { 454 compatible = "socionext,uniphier-sd-v3.1.1"; 455 status = "disabled"; 456 reg = <0x5a000000 0x800>; 457 interrupts = <0 78 4>; 458 pinctrl-names = "default"; 459 pinctrl-0 = <&pinctrl_emmc>; 460 clocks = <&sd_clk 1>; 461 reset-names = "host", "hw"; 462 resets = <&sd_rst 1>, <&sd_rst 6>; 463 bus-width = <8>; 464 cap-mmc-highspeed; 465 cap-mmc-hw-reset; 466 non-removable; 467 }; 468 469 sd: mmc@5a400000 { 470 compatible = "socionext,uniphier-sd-v3.1.1"; 471 status = "disabled"; 472 reg = <0x5a400000 0x800>; 473 interrupts = <0 76 4>; 474 pinctrl-names = "default", "uhs"; 475 pinctrl-0 = <&pinctrl_sd>; 476 pinctrl-1 = <&pinctrl_sd_uhs>; 477 clocks = <&sd_clk 0>; 478 reset-names = "host"; 479 resets = <&sd_rst 0>; 480 bus-width = <4>; 481 cap-sd-highspeed; 482 sd-uhs-sdr12; 483 sd-uhs-sdr25; 484 sd-uhs-sdr50; 485 }; 486 487 soc_glue: soc-glue@5f800000 { 488 compatible = "socionext,uniphier-pxs2-soc-glue", 489 "simple-mfd", "syscon"; 490 reg = <0x5f800000 0x2000>; 491 492 pinctrl: pinctrl { 493 compatible = "socionext,uniphier-pxs2-pinctrl"; 494 }; 495 }; 496 497 soc-glue@5f900000 { 498 compatible = "socionext,uniphier-pxs2-soc-glue-debug", 499 "simple-mfd"; 500 #address-cells = <1>; 501 #size-cells = <1>; 502 ranges = <0 0x5f900000 0x2000>; 503 504 efuse@100 { 505 compatible = "socionext,uniphier-efuse"; 506 reg = <0x100 0x28>; 507 }; 508 509 efuse@200 { 510 compatible = "socionext,uniphier-efuse"; 511 reg = <0x200 0x58>; 512 }; 513 }; 514 515 xdmac: dma-controller@5fc10000 { 516 compatible = "socionext,uniphier-xdmac"; 517 reg = <0x5fc10000 0x5300>; 518 interrupts = <0 188 4>; 519 dma-channels = <16>; 520 #dma-cells = <2>; 521 }; 522 523 aidet: interrupt-controller@5fc20000 { 524 compatible = "socionext,uniphier-pxs2-aidet"; 525 reg = <0x5fc20000 0x200>; 526 interrupt-controller; 527 #interrupt-cells = <2>; 528 }; 529 530 timer@60000200 { 531 compatible = "arm,cortex-a9-global-timer"; 532 reg = <0x60000200 0x20>; 533 interrupts = <1 11 0xf04>; 534 clocks = <&arm_timer_clk>; 535 }; 536 537 timer@60000600 { 538 compatible = "arm,cortex-a9-twd-timer"; 539 reg = <0x60000600 0x20>; 540 interrupts = <1 13 0xf04>; 541 clocks = <&arm_timer_clk>; 542 }; 543 544 intc: interrupt-controller@60001000 { 545 compatible = "arm,cortex-a9-gic"; 546 reg = <0x60001000 0x1000>, 547 <0x60000100 0x100>; 548 #interrupt-cells = <3>; 549 interrupt-controller; 550 }; 551 552 sysctrl@61840000 { 553 compatible = "socionext,uniphier-pxs2-sysctrl", 554 "simple-mfd", "syscon"; 555 reg = <0x61840000 0x10000>; 556 557 sys_clk: clock { 558 compatible = "socionext,uniphier-pxs2-clock"; 559 #clock-cells = <1>; 560 }; 561 562 sys_rst: reset { 563 compatible = "socionext,uniphier-pxs2-reset"; 564 #reset-cells = <1>; 565 }; 566 567 pvtctl: pvtctl { 568 compatible = "socionext,uniphier-pxs2-thermal"; 569 interrupts = <0 3 4>; 570 #thermal-sensor-cells = <0>; 571 socionext,tmod-calibration = <0x0f86 0x6844>; 572 }; 573 }; 574 575 eth: ethernet@65000000 { 576 compatible = "socionext,uniphier-pxs2-ave4"; 577 status = "disabled"; 578 reg = <0x65000000 0x8500>; 579 interrupts = <0 66 4>; 580 pinctrl-names = "default"; 581 pinctrl-0 = <&pinctrl_ether_rgmii>; 582 clock-names = "ether"; 583 clocks = <&sys_clk 6>; 584 reset-names = "ether"; 585 resets = <&sys_rst 6>; 586 phy-mode = "rgmii-id"; 587 local-mac-address = [00 00 00 00 00 00]; 588 socionext,syscon-phy-mode = <&soc_glue 0>; 589 590 mdio: mdio { 591 #address-cells = <1>; 592 #size-cells = <0>; 593 }; 594 }; 595 596 usb0: usb@65a00000 { 597 compatible = "socionext,uniphier-dwc3", "snps,dwc3"; 598 status = "disabled"; 599 reg = <0x65a00000 0xcd00>; 600 interrupt-names = "host", "peripheral"; 601 interrupts = <0 134 4>, <0 135 4>; 602 pinctrl-names = "default"; 603 pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>; 604 clock-names = "ref", "bus_early", "suspend"; 605 clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>; 606 resets = <&usb0_rst 15>; 607 phys = <&usb0_hsphy0>, <&usb0_hsphy1>, 608 <&usb0_ssphy0>, <&usb0_ssphy1>; 609 dr_mode = "host"; 610 }; 611 612 usb-glue@65b00000 { 613 compatible = "socionext,uniphier-pxs2-dwc3-glue", 614 "simple-mfd"; 615 #address-cells = <1>; 616 #size-cells = <1>; 617 ranges = <0 0x65b00000 0x400>; 618 619 usb0_rst: reset@0 { 620 compatible = "socionext,uniphier-pxs2-usb3-reset"; 621 reg = <0x0 0x4>; 622 #reset-cells = <1>; 623 clock-names = "link"; 624 clocks = <&sys_clk 14>; 625 reset-names = "link"; 626 resets = <&sys_rst 14>; 627 }; 628 629 usb0_vbus0: regulator@100 { 630 compatible = "socionext,uniphier-pxs2-usb3-regulator"; 631 reg = <0x100 0x10>; 632 clock-names = "link"; 633 clocks = <&sys_clk 14>; 634 reset-names = "link"; 635 resets = <&sys_rst 14>; 636 }; 637 638 usb0_vbus1: regulator@110 { 639 compatible = "socionext,uniphier-pxs2-usb3-regulator"; 640 reg = <0x110 0x10>; 641 clock-names = "link"; 642 clocks = <&sys_clk 14>; 643 reset-names = "link"; 644 resets = <&sys_rst 14>; 645 }; 646 647 usb0_hsphy0: hs-phy@200 { 648 compatible = "socionext,uniphier-pxs2-usb3-hsphy"; 649 reg = <0x200 0x10>; 650 #phy-cells = <0>; 651 clock-names = "link", "phy"; 652 clocks = <&sys_clk 14>, <&sys_clk 16>; 653 reset-names = "link", "phy"; 654 resets = <&sys_rst 14>, <&sys_rst 16>; 655 vbus-supply = <&usb0_vbus0>; 656 }; 657 658 usb0_hsphy1: hs-phy@210 { 659 compatible = "socionext,uniphier-pxs2-usb3-hsphy"; 660 reg = <0x210 0x10>; 661 #phy-cells = <0>; 662 clock-names = "link", "phy"; 663 clocks = <&sys_clk 14>, <&sys_clk 16>; 664 reset-names = "link", "phy"; 665 resets = <&sys_rst 14>, <&sys_rst 16>; 666 vbus-supply = <&usb0_vbus1>; 667 }; 668 669 usb0_ssphy0: ss-phy@300 { 670 compatible = "socionext,uniphier-pxs2-usb3-ssphy"; 671 reg = <0x300 0x10>; 672 #phy-cells = <0>; 673 clock-names = "link", "phy"; 674 clocks = <&sys_clk 14>, <&sys_clk 17>; 675 reset-names = "link", "phy"; 676 resets = <&sys_rst 14>, <&sys_rst 17>; 677 vbus-supply = <&usb0_vbus0>; 678 }; 679 680 usb0_ssphy1: ss-phy@310 { 681 compatible = "socionext,uniphier-pxs2-usb3-ssphy"; 682 reg = <0x310 0x10>; 683 #phy-cells = <0>; 684 clock-names = "link", "phy"; 685 clocks = <&sys_clk 14>, <&sys_clk 18>; 686 reset-names = "link", "phy"; 687 resets = <&sys_rst 14>, <&sys_rst 18>; 688 vbus-supply = <&usb0_vbus1>; 689 }; 690 }; 691 692 usb1: usb@65c00000 { 693 compatible = "socionext,uniphier-dwc3", "snps,dwc3"; 694 status = "disabled"; 695 reg = <0x65c00000 0xcd00>; 696 interrupt-names = "host", "peripheral"; 697 interrupts = <0 137 4>, <0 138 4>; 698 pinctrl-names = "default"; 699 pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>; 700 clock-names = "ref", "bus_early", "suspend"; 701 clocks = <&sys_clk 15>, <&sys_clk 15>, <&sys_clk 15>; 702 resets = <&usb1_rst 15>; 703 phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>; 704 dr_mode = "host"; 705 }; 706 707 usb-glue@65d00000 { 708 compatible = "socionext,uniphier-pxs2-dwc3-glue", 709 "simple-mfd"; 710 #address-cells = <1>; 711 #size-cells = <1>; 712 ranges = <0 0x65d00000 0x400>; 713 714 usb1_rst: reset@0 { 715 compatible = "socionext,uniphier-pxs2-usb3-reset"; 716 reg = <0x0 0x4>; 717 #reset-cells = <1>; 718 clock-names = "link"; 719 clocks = <&sys_clk 15>; 720 reset-names = "link"; 721 resets = <&sys_rst 15>; 722 }; 723 724 usb1_vbus0: regulator@100 { 725 compatible = "socionext,uniphier-pxs2-usb3-regulator"; 726 reg = <0x100 0x10>; 727 clock-names = "link"; 728 clocks = <&sys_clk 15>; 729 reset-names = "link"; 730 resets = <&sys_rst 15>; 731 }; 732 733 usb1_vbus1: regulator@110 { 734 compatible = "socionext,uniphier-pxs2-usb3-regulator"; 735 reg = <0x110 0x10>; 736 clock-names = "link"; 737 clocks = <&sys_clk 15>; 738 reset-names = "link"; 739 resets = <&sys_rst 15>; 740 }; 741 742 usb1_hsphy0: hs-phy@200 { 743 compatible = "socionext,uniphier-pxs2-usb3-hsphy"; 744 reg = <0x200 0x10>; 745 #phy-cells = <0>; 746 clock-names = "link", "phy"; 747 clocks = <&sys_clk 15>, <&sys_clk 20>; 748 reset-names = "link", "phy"; 749 resets = <&sys_rst 15>, <&sys_rst 20>; 750 vbus-supply = <&usb1_vbus0>; 751 }; 752 753 usb1_hsphy1: hs-phy@210 { 754 compatible = "socionext,uniphier-pxs2-usb3-hsphy"; 755 reg = <0x210 0x10>; 756 #phy-cells = <0>; 757 clock-names = "link", "phy"; 758 clocks = <&sys_clk 15>, <&sys_clk 20>; 759 reset-names = "link", "phy"; 760 resets = <&sys_rst 15>, <&sys_rst 20>; 761 vbus-supply = <&usb1_vbus1>; 762 }; 763 764 usb1_ssphy0: ss-phy@300 { 765 compatible = "socionext,uniphier-pxs2-usb3-ssphy"; 766 reg = <0x300 0x10>; 767 #phy-cells = <0>; 768 clock-names = "link", "phy"; 769 clocks = <&sys_clk 15>, <&sys_clk 21>; 770 reset-names = "link", "phy"; 771 resets = <&sys_rst 15>, <&sys_rst 21>; 772 vbus-supply = <&usb1_vbus0>; 773 }; 774 }; 775 776 nand: nand-controller@68000000 { 777 compatible = "socionext,uniphier-denali-nand-v5b"; 778 status = "disabled"; 779 reg-names = "nand_data", "denali_reg"; 780 reg = <0x68000000 0x20>, <0x68100000 0x1000>; 781 #address-cells = <1>; 782 #size-cells = <0>; 783 interrupts = <0 65 4>; 784 pinctrl-names = "default"; 785 pinctrl-0 = <&pinctrl_nand>; 786 clock-names = "nand", "nand_x", "ecc"; 787 clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; 788 reset-names = "nand", "reg"; 789 resets = <&sys_rst 2>, <&sys_rst 2>; 790 }; 791 }; 792}; 793 794#include "uniphier-pinctrl.dtsi"