vf610-bk4.dts (11233B)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright 2018 4 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de 5 */ 6 7/dts-v1/; 8#include "vf610.dtsi" 9 10/ { 11 model = "Liebherr BK4 controller"; 12 compatible = "lwn,bk4", "fsl,vf610"; 13 14 chosen { 15 stdout-path = &uart1; 16 }; 17 18 memory@80000000 { 19 device_type = "memory"; 20 reg = <0x80000000 0x8000000>; 21 }; 22 23 audio_ext: oscillator-audio { 24 compatible = "fixed-clock"; 25 #clock-cells = <0>; 26 clock-frequency = <24576000>; 27 }; 28 29 enet_ext: oscillator-ethernet { 30 compatible = "fixed-clock"; 31 #clock-cells = <0>; 32 clock-frequency = <50000000>; 33 }; 34 35 leds { 36 compatible = "gpio-leds"; 37 pinctrl-names = "default"; 38 pinctrl-0 = <&pinctrl_gpio_leds>; 39 40 /* LED D5 */ 41 led0: heartbeat { 42 label = "heartbeat"; 43 gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; 44 default-state = "on"; 45 linux,default-trigger = "heartbeat"; 46 }; 47 }; 48 49 reg_3p3v: regulator-3p3v { 50 compatible = "regulator-fixed"; 51 regulator-name = "3P3V"; 52 regulator-min-microvolt = <3300000>; 53 regulator-max-microvolt = <3300000>; 54 regulator-always-on; 55 }; 56 57 reg_vcc_3v3_mcu: regulator-vcc3v3mcu { 58 compatible = "regulator-fixed"; 59 regulator-name = "vcc_3v3_mcu"; 60 regulator-min-microvolt = <3300000>; 61 regulator-max-microvolt = <3300000>; 62 }; 63 64 spi-gpio { 65 compatible = "spi-gpio"; 66 pinctrl-0 = <&pinctrl_gpio_spi>; 67 pinctrl-names = "default"; 68 #address-cells = <1>; 69 #size-cells = <0>; 70 /* PTD12 ->RPIO[91] */ 71 sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; 72 /* PTD10 ->RPIO[89] */ 73 miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; 74 num-chipselects = <0>; 75 76 gpio@0 { 77 compatible = "pisosr-gpio"; 78 reg = <0>; 79 gpio-controller; 80 #gpio-cells = <2>; 81 /* PTB18 -> RGPIO[40] */ 82 load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; 83 spi-max-frequency = <100000>; 84 }; 85 }; 86}; 87 88&adc0 { 89 vref-supply = <®_vcc_3v3_mcu>; 90 status = "okay"; 91}; 92 93&adc1 { 94 vref-supply = <®_vcc_3v3_mcu>; 95 status = "okay"; 96}; 97 98&can0 { 99 pinctrl-names = "default"; 100 pinctrl-0 = <&pinctrl_can0>; 101 status = "okay"; 102}; 103 104&can1 { 105 pinctrl-names = "default"; 106 pinctrl-0 = <&pinctrl_can1>; 107 status = "okay"; 108}; 109 110&clks { 111 clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>; 112 clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext"; 113}; 114 115&dspi0 { 116 pinctrl-names = "default"; 117 pinctrl-0 = <&pinctrl_dspi0>; 118 bus-num = <0>; 119 status = "okay"; 120 121 spidev0@0 { 122 compatible = "lwn,bk4"; 123 spi-max-frequency = <30000000>; 124 reg = <0>; 125 fsl,spi-cs-sck-delay = <200>; 126 fsl,spi-sck-cs-delay = <400>; 127 }; 128}; 129 130&dspi3 { 131 pinctrl-names = "default"; 132 pinctrl-0 = <&pinctrl_dspi3>; 133 bus-num = <3>; 134 status = "okay"; 135 spi-slave; 136 #address-cells = <0>; 137 138 slave { 139 compatible = "lwn,bk4"; 140 spi-max-frequency = <30000000>; 141 }; 142}; 143 144&edma0 { 145 status = "okay"; 146}; 147 148&edma1 { 149 status = "okay"; 150}; 151 152&esdhc1 { 153 pinctrl-names = "default"; 154 pinctrl-0 = <&pinctrl_esdhc1>; 155 bus-width = <4>; 156 cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; 157 status = "okay"; 158}; 159 160&fec0 { 161 phy-mode = "rmii"; 162 phy-handle = <ðphy0>; 163 pinctrl-names = "default"; 164 pinctrl-0 = <&pinctrl_fec0>; 165 status = "okay"; 166 167 mdio { 168 #address-cells = <1>; 169 #size-cells = <0>; 170 171 ethphy0: ethernet-phy@1 { 172 reg = <1>; 173 clocks = <&clks VF610_CLK_ENET_50M>; 174 clock-names = "rmii-ref"; 175 }; 176 }; 177}; 178 179&fec1 { 180 phy-mode = "rmii"; 181 phy-handle = <ðphy1>; 182 pinctrl-names = "default"; 183 pinctrl-0 = <&pinctrl_fec1>; 184 status = "okay"; 185 186 mdio { 187 #address-cells = <1>; 188 #size-cells = <0>; 189 190 ethphy1: ethernet-phy@1 { 191 reg = <1>; 192 clocks = <&clks VF610_CLK_ENET_50M>; 193 clock-names = "rmii-ref"; 194 }; 195 }; 196}; 197 198&i2c2 { 199 clock-frequency = <400000>; 200 pinctrl-names = "default"; 201 pinctrl-0 = <&pinctrl_i2c2>; 202 status = "okay"; 203 204 at24c256: eeprom@50 { 205 compatible = "atmel,24c256"; 206 reg = <0x50>; 207 }; 208 209 m41t62: rtc@68 { 210 compatible = "st,m41t62"; 211 reg = <0x68>; 212 }; 213}; 214 215&nfc { 216 assigned-clocks = <&clks VF610_CLK_NFC>; 217 assigned-clock-rates = <33000000>; 218 pinctrl-names = "default"; 219 pinctrl-0 = <&pinctrl_nfc>; 220 status = "okay"; 221 222 nand@0 { 223 compatible = "fsl,vf610-nfc-nandcs"; 224 reg = <0>; 225 #address-cells = <1>; 226 #size-cells = <1>; 227 nand-bus-width = <16>; 228 nand-ecc-mode = "hw"; 229 nand-ecc-strength = <24>; 230 nand-ecc-step-size = <2048>; 231 nand-on-flash-bbt; 232 }; 233}; 234 235&qspi0 { 236 pinctrl-names = "default"; 237 pinctrl-0 = <&pinctrl_qspi0>; 238 status = "okay"; 239 240 n25q128a13_4: flash@0 { 241 compatible = "n25q128a13", "jedec,spi-nor"; 242 #address-cells = <1>; 243 #size-cells = <1>; 244 spi-max-frequency = <66000000>; 245 spi-rx-bus-width = <4>; 246 reg = <0>; 247 }; 248 249 n25q128a13_2: flash@2 { 250 compatible = "n25q128a13", "jedec,spi-nor"; 251 #address-cells = <1>; 252 #size-cells = <1>; 253 spi-max-frequency = <66000000>; 254 spi-rx-bus-width = <2>; 255 reg = <2>; 256 }; 257}; 258 259&uart0 { 260 pinctrl-names = "default"; 261 pinctrl-0 = <&pinctrl_uart0>; 262 /delete-property/dma-names; 263 status = "okay"; 264}; 265 266&uart1 { 267 pinctrl-names = "default"; 268 pinctrl-0 = <&pinctrl_uart1>; 269 /delete-property/dma-names; 270 status = "okay"; 271}; 272 273&uart2 { 274 pinctrl-names = "default"; 275 pinctrl-0 = <&pinctrl_uart2>; 276 /delete-property/dma-names; 277 status = "okay"; 278}; 279 280&uart3 { 281 pinctrl-names = "default"; 282 pinctrl-0 = <&pinctrl_uart3>; 283 /delete-property/dma-names; 284 status = "okay"; 285}; 286 287&usbdev0 { 288 disable-over-current; 289 status = "okay"; 290}; 291 292&usbh1 { 293 disable-over-current; 294 status = "okay"; 295}; 296 297&usbmisc0 { 298 status = "okay"; 299}; 300 301&usbmisc1 { 302 status = "okay"; 303}; 304 305&usbphy0 { 306 status = "okay"; 307}; 308 309&usbphy1 { 310 status = "okay"; 311}; 312 313&iomuxc { 314 pinctrl-names = "default"; 315 pinctrl-0 = <&pinctrl_hog>; 316 317 pinctrl_hog: hoggrp { 318 fsl,pins = < 319 /* One_Wire_PSU_EN */ 320 VF610_PAD_PTC29__GPIO_102 0x1183 321 /* SPI ENABLE */ 322 VF610_PAD_PTB26__GPIO_96 0x1183 323 /* EB control */ 324 VF610_PAD_PTE14__GPIO_119 0x1183 325 VF610_PAD_PTE4__GPIO_109 0x1181 326 /* Feedback_Lines */ 327 VF610_PAD_PTC31__GPIO_104 0x1181 328 VF610_PAD_PTA7__GPIO_134 0x1181 329 VF610_PAD_PTD9__GPIO_88 0x1181 330 VF610_PAD_PTE1__GPIO_106 0x1183 331 VF610_PAD_PTB2__GPIO_24 0x1181 332 VF610_PAD_PTB3__GPIO_25 0x1181 333 VF610_PAD_PTB1__GPIO_23 0x1181 334 /* SDHC Enable */ 335 VF610_PAD_PTE19__GPIO_124 0x1183 336 /* SDHC Overcurrent */ 337 VF610_PAD_PTB23__GPIO_93 0x1181 338 /* GPI */ 339 VF610_PAD_PTE2__GPIO_107 0x1181 340 VF610_PAD_PTE3__GPIO_108 0x1181 341 VF610_PAD_PTE5__GPIO_110 0x1181 342 VF610_PAD_PTE6__GPIO_111 0x1181 343 /* GPO */ 344 VF610_PAD_PTE0__GPIO_105 0x1183 345 VF610_PAD_PTE7__GPIO_112 0x1183 346 /* RS485 Control */ 347 VF610_PAD_PTB8__GPIO_30 0x1183 348 VF610_PAD_PTB9__GPIO_31 0x1183 349 VF610_PAD_PTE8__GPIO_113 0x1183 350 /* MPBUS MPB_EN */ 351 VF610_PAD_PTE28__GPIO_133 0x1183 352 /* MISC */ 353 VF610_PAD_PTE10__GPIO_115 0x1183 354 VF610_PAD_PTE11__GPIO_116 0x1183 355 VF610_PAD_PTE17__GPIO_122 0x1183 356 VF610_PAD_PTC30__GPIO_103 0x1183 357 VF610_PAD_PTB0__GPIO_22 0x1181 358 /* RESETINFO */ 359 VF610_PAD_PTE26__GPIO_131 0x1183 360 VF610_PAD_PTD6__GPIO_85 0x1181 361 VF610_PAD_PTE27__GPIO_132 0x1181 362 VF610_PAD_PTE13__GPIO_118 0x1181 363 VF610_PAD_PTE21__GPIO_126 0x1181 364 VF610_PAD_PTE22__GPIO_127 0x1181 365 /* EE_5V_EN */ 366 VF610_PAD_PTE18__GPIO_123 0x1183 367 /* EE_5V_OC_N */ 368 VF610_PAD_PTE25__GPIO_130 0x1181 369 >; 370 }; 371 372 pinctrl_can0: can0grp { 373 fsl,pins = < 374 VF610_PAD_PTB14__CAN0_RX 0x1181 375 VF610_PAD_PTB15__CAN0_TX 0x1182 376 >; 377 }; 378 379 pinctrl_can1: can1grp { 380 fsl,pins = < 381 VF610_PAD_PTB16__CAN1_RX 0x1181 382 VF610_PAD_PTB17__CAN1_TX 0x1182 383 >; 384 }; 385 386 pinctrl_dspi0: dspi0grp { 387 fsl,pins = < 388 VF610_PAD_PTB18__DSPI0_CS1 0x1182 389 VF610_PAD_PTB19__DSPI0_CS0 0x1182 390 VF610_PAD_PTB20__DSPI0_SIN 0x1181 391 VF610_PAD_PTB21__DSPI0_SOUT 0x1182 392 VF610_PAD_PTB22__DSPI0_SCK 0x1182 393 >; 394 }; 395 396 pinctrl_dspi3: dspi3grp { 397 fsl,pins = < 398 VF610_PAD_PTD10__DSPI3_CS0 0x1181 399 VF610_PAD_PTD11__DSPI3_SIN 0x1181 400 VF610_PAD_PTD12__DSPI3_SOUT 0x1182 401 VF610_PAD_PTD13__DSPI3_SCK 0x1181 402 >; 403 }; 404 405 pinctrl_esdhc1: esdhc1grp { 406 fsl,pins = < 407 VF610_PAD_PTA24__ESDHC1_CLK 0x31ef 408 VF610_PAD_PTA25__ESDHC1_CMD 0x31ef 409 VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef 410 VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef 411 VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef 412 VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef 413 VF610_PAD_PTB28__GPIO_98 0x219d 414 >; 415 }; 416 417 pinctrl_fec0: fec0grp { 418 fsl,pins = < 419 VF610_PAD_PTA6__RMII_CLKIN 0x30dd 420 VF610_PAD_PTC0__ENET_RMII0_MDC 0x30de 421 VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30df 422 VF610_PAD_PTC2__ENET_RMII0_CRS 0x30dd 423 VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30dd 424 VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30dd 425 VF610_PAD_PTC5__ENET_RMII0_RXER 0x30dd 426 VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30de 427 VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30de 428 VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30de 429 >; 430 }; 431 432 pinctrl_fec1: fec1grp { 433 fsl,pins = < 434 VF610_PAD_PTC9__ENET_RMII1_MDC 0x30de 435 VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30df 436 VF610_PAD_PTC11__ENET_RMII1_CRS 0x30dd 437 VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30dd 438 VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30dd 439 VF610_PAD_PTC14__ENET_RMII1_RXER 0x30dd 440 VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30de 441 VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30de 442 VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30de 443 >; 444 }; 445 446 pinctrl_gpio_leds: gpioledsgrp { 447 fsl,pins = < 448 /* Heart bit LED */ 449 VF610_PAD_PTE12__GPIO_117 0x1183 450 /* LEDS */ 451 VF610_PAD_PTE15__GPIO_120 0x1183 452 VF610_PAD_PTA12__GPIO_5 0x1183 453 VF610_PAD_PTA16__GPIO_6 0x1183 454 VF610_PAD_PTE9__GPIO_114 0x1183 455 VF610_PAD_PTE20__GPIO_125 0x1183 456 VF610_PAD_PTE23__GPIO_128 0x1183 457 VF610_PAD_PTE16__GPIO_121 0x1183 458 >; 459 }; 460 461 pinctrl_gpio_spi: pinctrl-gpio-spi { 462 fsl,pins = < 463 VF610_PAD_PTB18__GPIO_40 0x1183 464 VF610_PAD_PTD10__GPIO_89 0x1183 465 VF610_PAD_PTD12__GPIO_91 0x1183 466 >; 467 }; 468 469 pinctrl_i2c2: i2c2grp { 470 fsl,pins = < 471 VF610_PAD_PTA22__I2C2_SCL 0x34df 472 VF610_PAD_PTA23__I2C2_SDA 0x34df 473 >; 474 }; 475 476 pinctrl_nfc: nfcgrp { 477 fsl,pins = < 478 VF610_PAD_PTD23__NF_IO7 0x28df 479 VF610_PAD_PTD22__NF_IO6 0x28df 480 VF610_PAD_PTD21__NF_IO5 0x28df 481 VF610_PAD_PTD20__NF_IO4 0x28df 482 VF610_PAD_PTD19__NF_IO3 0x28df 483 VF610_PAD_PTD18__NF_IO2 0x28df 484 VF610_PAD_PTD17__NF_IO1 0x28df 485 VF610_PAD_PTD16__NF_IO0 0x28df 486 VF610_PAD_PTB24__NF_WE_B 0x28c2 487 VF610_PAD_PTB25__NF_CE0_B 0x28c2 488 VF610_PAD_PTB27__NF_RE_B 0x28c2 489 VF610_PAD_PTC26__NF_RB_B 0x283d 490 VF610_PAD_PTC27__NF_ALE 0x28c2 491 VF610_PAD_PTC28__NF_CLE 0x28c2 492 >; 493 }; 494 495 pinctrl_qspi0: qspi0grp { 496 fsl,pins = < 497 VF610_PAD_PTD0__QSPI0_A_QSCK 0x397f 498 VF610_PAD_PTD1__QSPI0_A_CS0 0x397f 499 VF610_PAD_PTD2__QSPI0_A_DATA3 0x397f 500 VF610_PAD_PTD3__QSPI0_A_DATA2 0x397f 501 VF610_PAD_PTD4__QSPI0_A_DATA1 0x397f 502 VF610_PAD_PTD5__QSPI0_A_DATA0 0x397f 503 VF610_PAD_PTD7__QSPI0_B_QSCK 0x397f 504 VF610_PAD_PTD8__QSPI0_B_CS0 0x397f 505 VF610_PAD_PTD11__QSPI0_B_DATA1 0x397f 506 VF610_PAD_PTD12__QSPI0_B_DATA0 0x397f 507 >; 508 }; 509 510 pinctrl_uart0: uart0grp { 511 fsl,pins = < 512 VF610_PAD_PTB10__UART0_TX 0x21a2 513 VF610_PAD_PTB11__UART0_RX 0x21a1 514 >; 515 }; 516 517 pinctrl_uart1: uart1grp { 518 fsl,pins = < 519 VF610_PAD_PTB4__UART1_TX 0x21a2 520 VF610_PAD_PTB5__UART1_RX 0x21a1 521 >; 522 }; 523 524 pinctrl_uart2: uart2grp { 525 fsl,pins = < 526 VF610_PAD_PTB6__UART2_TX 0x21a2 527 VF610_PAD_PTB7__UART2_RX 0x21a1 528 >; 529 }; 530 531 pinctrl_uart3: uart3grp { 532 fsl,pins = < 533 VF610_PAD_PTA20__UART3_TX 0x21a2 534 VF610_PAD_PTA21__UART3_RX 0x21a1 535 >; 536 }; 537};