cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

platsmp-brcmstb.c (8950B)


      1/*
      2 * Broadcom STB CPU SMP and hotplug support for ARM
      3 *
      4 * Copyright (C) 2013-2014 Broadcom Corporation
      5 *
      6 * This program is free software; you can redistribute it and/or
      7 * modify it under the terms of the GNU General Public License as
      8 * published by the Free Software Foundation version 2.
      9 *
     10 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
     11 * kind, whether express or implied; without even the implied warranty
     12 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     13 * GNU General Public License for more details.
     14 */
     15
     16#include <linux/delay.h>
     17#include <linux/errno.h>
     18#include <linux/init.h>
     19#include <linux/io.h>
     20#include <linux/jiffies.h>
     21#include <linux/of_address.h>
     22#include <linux/of_platform.h>
     23#include <linux/printk.h>
     24#include <linux/regmap.h>
     25#include <linux/smp.h>
     26#include <linux/mfd/syscon.h>
     27
     28#include <asm/cacheflush.h>
     29#include <asm/cp15.h>
     30#include <asm/mach-types.h>
     31#include <asm/smp_plat.h>
     32
     33enum {
     34	ZONE_MAN_CLKEN_MASK		= BIT(0),
     35	ZONE_MAN_RESET_CNTL_MASK	= BIT(1),
     36	ZONE_MAN_MEM_PWR_MASK		= BIT(4),
     37	ZONE_RESERVED_1_MASK		= BIT(5),
     38	ZONE_MAN_ISO_CNTL_MASK		= BIT(6),
     39	ZONE_MANUAL_CONTROL_MASK	= BIT(7),
     40	ZONE_PWR_DN_REQ_MASK		= BIT(9),
     41	ZONE_PWR_UP_REQ_MASK		= BIT(10),
     42	ZONE_BLK_RST_ASSERT_MASK	= BIT(12),
     43	ZONE_PWR_OFF_STATE_MASK		= BIT(25),
     44	ZONE_PWR_ON_STATE_MASK		= BIT(26),
     45	ZONE_DPG_PWR_STATE_MASK		= BIT(28),
     46	ZONE_MEM_PWR_STATE_MASK		= BIT(29),
     47	ZONE_RESET_STATE_MASK		= BIT(31),
     48	CPU0_PWR_ZONE_CTRL_REG		= 1,
     49	CPU_RESET_CONFIG_REG		= 2,
     50};
     51
     52static void __iomem *cpubiuctrl_block;
     53static void __iomem *hif_cont_block;
     54static u32 cpu0_pwr_zone_ctrl_reg;
     55static u32 cpu_rst_cfg_reg;
     56static u32 hif_cont_reg;
     57
     58#ifdef CONFIG_HOTPLUG_CPU
     59/*
     60 * We must quiesce a dying CPU before it can be killed by the boot CPU. Because
     61 * one or more cache may be disabled, we must flush to ensure coherency. We
     62 * cannot use traditional completion structures or spinlocks as they rely on
     63 * coherency.
     64 */
     65static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state);
     66
     67static int per_cpu_sw_state_rd(u32 cpu)
     68{
     69	sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
     70	return per_cpu(per_cpu_sw_state, cpu);
     71}
     72
     73static void per_cpu_sw_state_wr(u32 cpu, int val)
     74{
     75	dmb();
     76	per_cpu(per_cpu_sw_state, cpu) = val;
     77	sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
     78}
     79#else
     80static inline void per_cpu_sw_state_wr(u32 cpu, int val) { }
     81#endif
     82
     83static void __iomem *pwr_ctrl_get_base(u32 cpu)
     84{
     85	void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg;
     86	base += (cpu_logical_map(cpu) * 4);
     87	return base;
     88}
     89
     90static u32 pwr_ctrl_rd(u32 cpu)
     91{
     92	void __iomem *base = pwr_ctrl_get_base(cpu);
     93	return readl_relaxed(base);
     94}
     95
     96static void pwr_ctrl_set(unsigned int cpu, u32 val, u32 mask)
     97{
     98	void __iomem *base = pwr_ctrl_get_base(cpu);
     99	writel((readl(base) & mask) | val, base);
    100}
    101
    102static void pwr_ctrl_clr(unsigned int cpu, u32 val, u32 mask)
    103{
    104	void __iomem *base = pwr_ctrl_get_base(cpu);
    105	writel((readl(base) & mask) & ~val, base);
    106}
    107
    108#define POLL_TMOUT_MS 500
    109static int pwr_ctrl_wait_tmout(unsigned int cpu, u32 set, u32 mask)
    110{
    111	const unsigned long timeo = jiffies + msecs_to_jiffies(POLL_TMOUT_MS);
    112	u32 tmp;
    113
    114	do {
    115		tmp = pwr_ctrl_rd(cpu) & mask;
    116		if (!set == !tmp)
    117			return 0;
    118	} while (time_before(jiffies, timeo));
    119
    120	tmp = pwr_ctrl_rd(cpu) & mask;
    121	if (!set == !tmp)
    122		return 0;
    123
    124	return -ETIMEDOUT;
    125}
    126
    127static void cpu_rst_cfg_set(u32 cpu, int set)
    128{
    129	u32 val;
    130	val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg);
    131	if (set)
    132		val |= BIT(cpu_logical_map(cpu));
    133	else
    134		val &= ~BIT(cpu_logical_map(cpu));
    135	writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg);
    136}
    137
    138static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr)
    139{
    140	const int reg_ofs = cpu_logical_map(cpu) * 8;
    141	writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs);
    142	writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs);
    143}
    144
    145static void brcmstb_cpu_boot(u32 cpu)
    146{
    147	/* Mark this CPU as "up" */
    148	per_cpu_sw_state_wr(cpu, 1);
    149
    150	/*
    151	 * Set the reset vector to point to the secondary_startup
    152	 * routine
    153	 */
    154	cpu_set_boot_addr(cpu, __pa_symbol(secondary_startup));
    155
    156	/* Unhalt the cpu */
    157	cpu_rst_cfg_set(cpu, 0);
    158}
    159
    160static void brcmstb_cpu_power_on(u32 cpu)
    161{
    162	/*
    163	 * The secondary cores power was cut, so we must go through
    164	 * power-on initialization.
    165	 */
    166	pwr_ctrl_set(cpu, ZONE_MAN_ISO_CNTL_MASK, 0xffffff00);
    167	pwr_ctrl_set(cpu, ZONE_MANUAL_CONTROL_MASK, -1);
    168	pwr_ctrl_set(cpu, ZONE_RESERVED_1_MASK, -1);
    169
    170	pwr_ctrl_set(cpu, ZONE_MAN_MEM_PWR_MASK, -1);
    171
    172	if (pwr_ctrl_wait_tmout(cpu, 1, ZONE_MEM_PWR_STATE_MASK))
    173		panic("ZONE_MEM_PWR_STATE_MASK set timeout");
    174
    175	pwr_ctrl_set(cpu, ZONE_MAN_CLKEN_MASK, -1);
    176
    177	if (pwr_ctrl_wait_tmout(cpu, 1, ZONE_DPG_PWR_STATE_MASK))
    178		panic("ZONE_DPG_PWR_STATE_MASK set timeout");
    179
    180	pwr_ctrl_clr(cpu, ZONE_MAN_ISO_CNTL_MASK, -1);
    181	pwr_ctrl_set(cpu, ZONE_MAN_RESET_CNTL_MASK, -1);
    182}
    183
    184static int brcmstb_cpu_get_power_state(u32 cpu)
    185{
    186	int tmp = pwr_ctrl_rd(cpu);
    187	return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1;
    188}
    189
    190#ifdef CONFIG_HOTPLUG_CPU
    191
    192static void brcmstb_cpu_die(u32 cpu)
    193{
    194	v7_exit_coherency_flush(all);
    195
    196	per_cpu_sw_state_wr(cpu, 0);
    197
    198	/* Sit and wait to die */
    199	wfi();
    200
    201	/* We should never get here... */
    202	while (1)
    203		;
    204}
    205
    206static int brcmstb_cpu_kill(u32 cpu)
    207{
    208	/*
    209	 * Ordinarily, the hardware forbids power-down of CPU0 (which is good
    210	 * because it is the boot CPU), but this is not true when using BPCM
    211	 * manual mode.  Consequently, we must avoid turning off CPU0 here to
    212	 * ensure that TI2C master reset will work.
    213	 */
    214	if (cpu == 0) {
    215		pr_warn("SMP: refusing to power off CPU0\n");
    216		return 1;
    217	}
    218
    219	while (per_cpu_sw_state_rd(cpu))
    220		;
    221
    222	pwr_ctrl_set(cpu, ZONE_MANUAL_CONTROL_MASK, -1);
    223	pwr_ctrl_clr(cpu, ZONE_MAN_RESET_CNTL_MASK, -1);
    224	pwr_ctrl_clr(cpu, ZONE_MAN_CLKEN_MASK, -1);
    225	pwr_ctrl_set(cpu, ZONE_MAN_ISO_CNTL_MASK, -1);
    226	pwr_ctrl_clr(cpu, ZONE_MAN_MEM_PWR_MASK, -1);
    227
    228	if (pwr_ctrl_wait_tmout(cpu, 0, ZONE_MEM_PWR_STATE_MASK))
    229		panic("ZONE_MEM_PWR_STATE_MASK clear timeout");
    230
    231	pwr_ctrl_clr(cpu, ZONE_RESERVED_1_MASK, -1);
    232
    233	if (pwr_ctrl_wait_tmout(cpu, 0, ZONE_DPG_PWR_STATE_MASK))
    234		panic("ZONE_DPG_PWR_STATE_MASK clear timeout");
    235
    236	/* Flush pipeline before resetting CPU */
    237	mb();
    238
    239	/* Assert reset on the CPU */
    240	cpu_rst_cfg_set(cpu, 1);
    241
    242	return 1;
    243}
    244
    245#endif /* CONFIG_HOTPLUG_CPU */
    246
    247static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
    248{
    249	int rc = 0;
    250	char *name;
    251	struct device_node *syscon_np = NULL;
    252
    253	name = "syscon-cpu";
    254
    255	syscon_np = of_parse_phandle(np, name, 0);
    256	if (!syscon_np) {
    257		pr_err("can't find phandle %s\n", name);
    258		rc = -EINVAL;
    259		goto cleanup;
    260	}
    261
    262	cpubiuctrl_block = of_iomap(syscon_np, 0);
    263	if (!cpubiuctrl_block) {
    264		pr_err("iomap failed for cpubiuctrl_block\n");
    265		rc = -EINVAL;
    266		goto cleanup;
    267	}
    268
    269	rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG,
    270					&cpu0_pwr_zone_ctrl_reg);
    271	if (rc) {
    272		pr_err("failed to read 1st entry from %s property (%d)\n", name,
    273			rc);
    274		rc = -EINVAL;
    275		goto cleanup;
    276	}
    277
    278	rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG,
    279					&cpu_rst_cfg_reg);
    280	if (rc) {
    281		pr_err("failed to read 2nd entry from %s property (%d)\n", name,
    282			rc);
    283		rc = -EINVAL;
    284		goto cleanup;
    285	}
    286
    287cleanup:
    288	of_node_put(syscon_np);
    289	return rc;
    290}
    291
    292static int __init setup_hifcont_regs(struct device_node *np)
    293{
    294	int rc = 0;
    295	char *name;
    296	struct device_node *syscon_np = NULL;
    297
    298	name = "syscon-cont";
    299
    300	syscon_np = of_parse_phandle(np, name, 0);
    301	if (!syscon_np) {
    302		pr_err("can't find phandle %s\n", name);
    303		rc = -EINVAL;
    304		goto cleanup;
    305	}
    306
    307	hif_cont_block = of_iomap(syscon_np, 0);
    308	if (!hif_cont_block) {
    309		pr_err("iomap failed for hif_cont_block\n");
    310		rc = -EINVAL;
    311		goto cleanup;
    312	}
    313
    314	/* Offset is at top of hif_cont_block */
    315	hif_cont_reg = 0;
    316
    317cleanup:
    318	of_node_put(syscon_np);
    319	return rc;
    320}
    321
    322static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus)
    323{
    324	int rc;
    325	struct device_node *np;
    326	char *name;
    327
    328	name = "brcm,brcmstb-smpboot";
    329	np = of_find_compatible_node(NULL, NULL, name);
    330	if (!np) {
    331		pr_err("can't find compatible node %s\n", name);
    332		return;
    333	}
    334
    335	rc = setup_hifcpubiuctrl_regs(np);
    336	if (rc)
    337		goto out_put_node;
    338
    339	rc = setup_hifcont_regs(np);
    340	if (rc)
    341		goto out_put_node;
    342
    343out_put_node:
    344	of_node_put(np);
    345}
    346
    347static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle)
    348{
    349	/* Missing the brcm,brcmstb-smpboot DT node? */
    350	if (!cpubiuctrl_block || !hif_cont_block)
    351		return -ENODEV;
    352
    353	/* Bring up power to the core if necessary */
    354	if (brcmstb_cpu_get_power_state(cpu) == 0)
    355		brcmstb_cpu_power_on(cpu);
    356
    357	brcmstb_cpu_boot(cpu);
    358
    359	return 0;
    360}
    361
    362static const struct smp_operations brcmstb_smp_ops __initconst = {
    363	.smp_prepare_cpus	= brcmstb_cpu_ctrl_setup,
    364	.smp_boot_secondary	= brcmstb_boot_secondary,
    365#ifdef CONFIG_HOTPLUG_CPU
    366	.cpu_kill		= brcmstb_cpu_kill,
    367	.cpu_die		= brcmstb_cpu_die,
    368#endif
    369};
    370
    371CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops);