rd88f5181l-ge-setup.c (4967B)
1/* 2 * arch/arm/mach-orion5x/rd88f5181l-ge-setup.c 3 * 4 * Marvell Orion-VoIP GE Reference Design Setup 5 * 6 * This file is licensed under the terms of the GNU General Public 7 * License version 2. This program is licensed "as is" without any 8 * warranty of any kind, whether express or implied. 9 */ 10#include <linux/gpio.h> 11#include <linux/kernel.h> 12#include <linux/init.h> 13#include <linux/platform_device.h> 14#include <linux/pci.h> 15#include <linux/irq.h> 16#include <linux/mtd/physmap.h> 17#include <linux/mv643xx_eth.h> 18#include <linux/ethtool.h> 19#include <linux/i2c.h> 20#include <linux/platform_data/dsa.h> 21#include <asm/mach-types.h> 22#include <asm/mach/arch.h> 23#include <asm/mach/pci.h> 24#include "common.h" 25#include "mpp.h" 26#include "orion5x.h" 27 28/***************************************************************************** 29 * RD-88F5181L GE Info 30 ****************************************************************************/ 31/* 32 * 16M NOR flash Device bus boot chip select 33 */ 34#define RD88F5181L_GE_NOR_BOOT_BASE 0xff000000 35#define RD88F5181L_GE_NOR_BOOT_SIZE SZ_16M 36 37 38/***************************************************************************** 39 * 16M NOR Flash on Device bus Boot chip select 40 ****************************************************************************/ 41static struct physmap_flash_data rd88f5181l_ge_nor_boot_flash_data = { 42 .width = 1, 43}; 44 45static struct resource rd88f5181l_ge_nor_boot_flash_resource = { 46 .flags = IORESOURCE_MEM, 47 .start = RD88F5181L_GE_NOR_BOOT_BASE, 48 .end = RD88F5181L_GE_NOR_BOOT_BASE + 49 RD88F5181L_GE_NOR_BOOT_SIZE - 1, 50}; 51 52static struct platform_device rd88f5181l_ge_nor_boot_flash = { 53 .name = "physmap-flash", 54 .id = 0, 55 .dev = { 56 .platform_data = &rd88f5181l_ge_nor_boot_flash_data, 57 }, 58 .num_resources = 1, 59 .resource = &rd88f5181l_ge_nor_boot_flash_resource, 60}; 61 62 63/***************************************************************************** 64 * General Setup 65 ****************************************************************************/ 66static unsigned int rd88f5181l_ge_mpp_modes[] __initdata = { 67 MPP0_GPIO, /* LED1 */ 68 MPP1_GPIO, /* LED5 */ 69 MPP2_GPIO, /* LED4 */ 70 MPP3_GPIO, /* LED3 */ 71 MPP4_GPIO, /* PCI_intA */ 72 MPP5_GPIO, /* RTC interrupt */ 73 MPP6_PCI_CLK, /* CPU PCI refclk */ 74 MPP7_PCI_CLK, /* PCI/PCIe refclk */ 75 MPP8_GPIO, /* 88e6131 interrupt */ 76 MPP9_GPIO, /* GE_RXERR */ 77 MPP10_GPIO, /* PCI_intB */ 78 MPP11_GPIO, /* LED2 */ 79 MPP12_GIGE, /* GE_TXD[4] */ 80 MPP13_GIGE, /* GE_TXD[5] */ 81 MPP14_GIGE, /* GE_TXD[6] */ 82 MPP15_GIGE, /* GE_TXD[7] */ 83 MPP16_GIGE, /* GE_RXD[4] */ 84 MPP17_GIGE, /* GE_RXD[5] */ 85 MPP18_GIGE, /* GE_RXD[6] */ 86 MPP19_GIGE, /* GE_RXD[7] */ 87 0, 88}; 89 90static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = { 91 .phy_addr = MV643XX_ETH_PHY_NONE, 92 .speed = SPEED_1000, 93 .duplex = DUPLEX_FULL, 94}; 95 96static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = { 97 .port_names[0] = "lan2", 98 .port_names[1] = "lan1", 99 .port_names[2] = "wan", 100 .port_names[3] = "cpu", 101 .port_names[5] = "lan4", 102 .port_names[7] = "lan3", 103}; 104 105static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = { 106 I2C_BOARD_INFO("ds1338", 0x68), 107}; 108 109static void __init rd88f5181l_ge_init(void) 110{ 111 /* 112 * Setup basic Orion functions. Need to be called early. 113 */ 114 orion5x_init(); 115 116 orion5x_mpp_conf(rd88f5181l_ge_mpp_modes); 117 118 /* 119 * Configure peripherals. 120 */ 121 orion5x_ehci0_init(); 122 orion5x_eth_init(&rd88f5181l_ge_eth_data); 123 orion5x_eth_switch_init(&rd88f5181l_ge_switch_chip_data); 124 orion5x_i2c_init(); 125 orion5x_uart0_init(); 126 127 mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, 128 ORION_MBUS_DEVBUS_BOOT_ATTR, 129 RD88F5181L_GE_NOR_BOOT_BASE, 130 RD88F5181L_GE_NOR_BOOT_SIZE); 131 platform_device_register(&rd88f5181l_ge_nor_boot_flash); 132 133 i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1); 134} 135 136static int __init 137rd88f5181l_ge_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) 138{ 139 int irq; 140 141 /* 142 * Check for devices with hard-wired IRQs. 143 */ 144 irq = orion5x_pci_map_irq(dev, slot, pin); 145 if (irq != -1) 146 return irq; 147 148 /* 149 * Cardbus slot. 150 */ 151 if (pin == 1) 152 return gpio_to_irq(4); 153 else 154 return gpio_to_irq(10); 155} 156 157static struct hw_pci rd88f5181l_ge_pci __initdata = { 158 .nr_controllers = 2, 159 .setup = orion5x_pci_sys_setup, 160 .scan = orion5x_pci_sys_scan_bus, 161 .map_irq = rd88f5181l_ge_pci_map_irq, 162}; 163 164static int __init rd88f5181l_ge_pci_init(void) 165{ 166 if (machine_is_rd88f5181l_ge()) { 167 orion5x_pci_set_cardbus_mode(); 168 pci_common_init(&rd88f5181l_ge_pci); 169 } 170 171 return 0; 172} 173subsys_initcall(rd88f5181l_ge_pci_init); 174 175MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design") 176 /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ 177 .atag_offset = 0x100, 178 .nr_irqs = ORION5X_NR_IRQS, 179 .init_machine = rd88f5181l_ge_init, 180 .map_io = orion5x_map_io, 181 .init_early = orion5x_init_early, 182 .init_irq = orion5x_init_irq, 183 .init_time = orion5x_timer_init, 184 .fixup = tag_fixup_mem32, 185 .restart = orion5x_restart, 186MACHINE_END