platsmp.c (9119B)
1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (C) 2002 ARM Ltd. 4 * All Rights Reserved 5 * Copyright (c) 2010, Code Aurora Forum. All rights reserved. 6 * Copyright (c) 2014 The Linux Foundation. All rights reserved. 7 */ 8 9#include <linux/init.h> 10#include <linux/errno.h> 11#include <linux/delay.h> 12#include <linux/device.h> 13#include <linux/of.h> 14#include <linux/of_address.h> 15#include <linux/smp.h> 16#include <linux/io.h> 17#include <linux/qcom_scm.h> 18 19#include <asm/smp_plat.h> 20 21 22#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x35a0 23#define SCSS_CPU1CORE_RESET 0x2d80 24#define SCSS_DBG_STATUS_CORE_PWRDUP 0x2e64 25 26#define APCS_CPU_PWR_CTL 0x04 27#define PLL_CLAMP BIT(8) 28#define CORE_PWRD_UP BIT(7) 29#define COREPOR_RST BIT(5) 30#define CORE_RST BIT(4) 31#define L2DT_SLP BIT(3) 32#define CORE_MEM_CLAMP BIT(1) 33#define CLAMP BIT(0) 34 35#define APC_PWR_GATE_CTL 0x14 36#define BHS_CNT_SHIFT 24 37#define LDO_PWR_DWN_SHIFT 16 38#define LDO_BYP_SHIFT 8 39#define BHS_SEG_SHIFT 1 40#define BHS_EN BIT(0) 41 42#define APCS_SAW2_VCTL 0x14 43#define APCS_SAW2_2_VCTL 0x1c 44 45extern void secondary_startup_arm(void); 46 47#ifdef CONFIG_HOTPLUG_CPU 48static void qcom_cpu_die(unsigned int cpu) 49{ 50 wfi(); 51} 52#endif 53 54static int scss_release_secondary(unsigned int cpu) 55{ 56 struct device_node *node; 57 void __iomem *base; 58 59 node = of_find_compatible_node(NULL, NULL, "qcom,gcc-msm8660"); 60 if (!node) { 61 pr_err("%s: can't find node\n", __func__); 62 return -ENXIO; 63 } 64 65 base = of_iomap(node, 0); 66 of_node_put(node); 67 if (!base) 68 return -ENOMEM; 69 70 writel_relaxed(0, base + VDD_SC1_ARRAY_CLAMP_GFS_CTL); 71 writel_relaxed(0, base + SCSS_CPU1CORE_RESET); 72 writel_relaxed(3, base + SCSS_DBG_STATUS_CORE_PWRDUP); 73 mb(); 74 iounmap(base); 75 76 return 0; 77} 78 79static int cortex_a7_release_secondary(unsigned int cpu) 80{ 81 int ret = 0; 82 void __iomem *reg; 83 struct device_node *cpu_node, *acc_node; 84 u32 reg_val; 85 86 cpu_node = of_get_cpu_node(cpu, NULL); 87 if (!cpu_node) 88 return -ENODEV; 89 90 acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0); 91 if (!acc_node) { 92 ret = -ENODEV; 93 goto out_acc; 94 } 95 96 reg = of_iomap(acc_node, 0); 97 if (!reg) { 98 ret = -ENOMEM; 99 goto out_acc_map; 100 } 101 102 /* Put the CPU into reset. */ 103 reg_val = CORE_RST | COREPOR_RST | CLAMP | CORE_MEM_CLAMP; 104 writel(reg_val, reg + APCS_CPU_PWR_CTL); 105 106 /* Turn on the BHS and set the BHS_CNT to 16 XO clock cycles */ 107 writel(BHS_EN | (0x10 << BHS_CNT_SHIFT), reg + APC_PWR_GATE_CTL); 108 /* Wait for the BHS to settle */ 109 udelay(2); 110 111 reg_val &= ~CORE_MEM_CLAMP; 112 writel(reg_val, reg + APCS_CPU_PWR_CTL); 113 reg_val |= L2DT_SLP; 114 writel(reg_val, reg + APCS_CPU_PWR_CTL); 115 udelay(2); 116 117 reg_val = (reg_val | BIT(17)) & ~CLAMP; 118 writel(reg_val, reg + APCS_CPU_PWR_CTL); 119 udelay(2); 120 121 /* Release CPU out of reset and bring it to life. */ 122 reg_val &= ~(CORE_RST | COREPOR_RST); 123 writel(reg_val, reg + APCS_CPU_PWR_CTL); 124 reg_val |= CORE_PWRD_UP; 125 writel(reg_val, reg + APCS_CPU_PWR_CTL); 126 127 iounmap(reg); 128out_acc_map: 129 of_node_put(acc_node); 130out_acc: 131 of_node_put(cpu_node); 132 return ret; 133} 134 135static int kpssv1_release_secondary(unsigned int cpu) 136{ 137 int ret = 0; 138 void __iomem *reg, *saw_reg; 139 struct device_node *cpu_node, *acc_node, *saw_node; 140 u32 val; 141 142 cpu_node = of_get_cpu_node(cpu, NULL); 143 if (!cpu_node) 144 return -ENODEV; 145 146 acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0); 147 if (!acc_node) { 148 ret = -ENODEV; 149 goto out_acc; 150 } 151 152 saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0); 153 if (!saw_node) { 154 ret = -ENODEV; 155 goto out_saw; 156 } 157 158 reg = of_iomap(acc_node, 0); 159 if (!reg) { 160 ret = -ENOMEM; 161 goto out_acc_map; 162 } 163 164 saw_reg = of_iomap(saw_node, 0); 165 if (!saw_reg) { 166 ret = -ENOMEM; 167 goto out_saw_map; 168 } 169 170 /* Turn on CPU rail */ 171 writel_relaxed(0xA4, saw_reg + APCS_SAW2_VCTL); 172 mb(); 173 udelay(512); 174 175 /* Krait bring-up sequence */ 176 val = PLL_CLAMP | L2DT_SLP | CLAMP; 177 writel_relaxed(val, reg + APCS_CPU_PWR_CTL); 178 val &= ~L2DT_SLP; 179 writel_relaxed(val, reg + APCS_CPU_PWR_CTL); 180 mb(); 181 ndelay(300); 182 183 val |= COREPOR_RST; 184 writel_relaxed(val, reg + APCS_CPU_PWR_CTL); 185 mb(); 186 udelay(2); 187 188 val &= ~CLAMP; 189 writel_relaxed(val, reg + APCS_CPU_PWR_CTL); 190 mb(); 191 udelay(2); 192 193 val &= ~COREPOR_RST; 194 writel_relaxed(val, reg + APCS_CPU_PWR_CTL); 195 mb(); 196 udelay(100); 197 198 val |= CORE_PWRD_UP; 199 writel_relaxed(val, reg + APCS_CPU_PWR_CTL); 200 mb(); 201 202 iounmap(saw_reg); 203out_saw_map: 204 iounmap(reg); 205out_acc_map: 206 of_node_put(saw_node); 207out_saw: 208 of_node_put(acc_node); 209out_acc: 210 of_node_put(cpu_node); 211 return ret; 212} 213 214static int kpssv2_release_secondary(unsigned int cpu) 215{ 216 void __iomem *reg; 217 struct device_node *cpu_node, *l2_node, *acc_node, *saw_node; 218 void __iomem *l2_saw_base; 219 unsigned reg_val; 220 int ret; 221 222 cpu_node = of_get_cpu_node(cpu, NULL); 223 if (!cpu_node) 224 return -ENODEV; 225 226 acc_node = of_parse_phandle(cpu_node, "qcom,acc", 0); 227 if (!acc_node) { 228 ret = -ENODEV; 229 goto out_acc; 230 } 231 232 l2_node = of_parse_phandle(cpu_node, "next-level-cache", 0); 233 if (!l2_node) { 234 ret = -ENODEV; 235 goto out_l2; 236 } 237 238 saw_node = of_parse_phandle(l2_node, "qcom,saw", 0); 239 if (!saw_node) { 240 ret = -ENODEV; 241 goto out_saw; 242 } 243 244 reg = of_iomap(acc_node, 0); 245 if (!reg) { 246 ret = -ENOMEM; 247 goto out_map; 248 } 249 250 l2_saw_base = of_iomap(saw_node, 0); 251 if (!l2_saw_base) { 252 ret = -ENOMEM; 253 goto out_saw_map; 254 } 255 256 /* Turn on the BHS, turn off LDO Bypass and power down LDO */ 257 reg_val = (64 << BHS_CNT_SHIFT) | (0x3f << LDO_PWR_DWN_SHIFT) | BHS_EN; 258 writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL); 259 mb(); 260 /* wait for the BHS to settle */ 261 udelay(1); 262 263 /* Turn on BHS segments */ 264 reg_val |= 0x3f << BHS_SEG_SHIFT; 265 writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL); 266 mb(); 267 /* wait for the BHS to settle */ 268 udelay(1); 269 270 /* Finally turn on the bypass so that BHS supplies power */ 271 reg_val |= 0x3f << LDO_BYP_SHIFT; 272 writel_relaxed(reg_val, reg + APC_PWR_GATE_CTL); 273 274 /* enable max phases */ 275 writel_relaxed(0x10003, l2_saw_base + APCS_SAW2_2_VCTL); 276 mb(); 277 udelay(50); 278 279 reg_val = COREPOR_RST | CLAMP; 280 writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL); 281 mb(); 282 udelay(2); 283 284 reg_val &= ~CLAMP; 285 writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL); 286 mb(); 287 udelay(2); 288 289 reg_val &= ~COREPOR_RST; 290 writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL); 291 mb(); 292 293 reg_val |= CORE_PWRD_UP; 294 writel_relaxed(reg_val, reg + APCS_CPU_PWR_CTL); 295 mb(); 296 297 ret = 0; 298 299 iounmap(l2_saw_base); 300out_saw_map: 301 iounmap(reg); 302out_map: 303 of_node_put(saw_node); 304out_saw: 305 of_node_put(l2_node); 306out_l2: 307 of_node_put(acc_node); 308out_acc: 309 of_node_put(cpu_node); 310 311 return ret; 312} 313 314static DEFINE_PER_CPU(int, cold_boot_done); 315 316static int qcom_boot_secondary(unsigned int cpu, int (*func)(unsigned int)) 317{ 318 int ret = 0; 319 320 if (!per_cpu(cold_boot_done, cpu)) { 321 ret = func(cpu); 322 if (!ret) 323 per_cpu(cold_boot_done, cpu) = true; 324 } 325 326 /* 327 * Send the secondary CPU a soft interrupt, thereby causing 328 * the boot monitor to read the system wide flags register, 329 * and branch to the address found there. 330 */ 331 arch_send_wakeup_ipi_mask(cpumask_of(cpu)); 332 333 return ret; 334} 335 336static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle) 337{ 338 return qcom_boot_secondary(cpu, scss_release_secondary); 339} 340 341static int cortex_a7_boot_secondary(unsigned int cpu, struct task_struct *idle) 342{ 343 return qcom_boot_secondary(cpu, cortex_a7_release_secondary); 344} 345 346static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle) 347{ 348 return qcom_boot_secondary(cpu, kpssv1_release_secondary); 349} 350 351static int kpssv2_boot_secondary(unsigned int cpu, struct task_struct *idle) 352{ 353 return qcom_boot_secondary(cpu, kpssv2_release_secondary); 354} 355 356static void __init qcom_smp_prepare_cpus(unsigned int max_cpus) 357{ 358 int cpu; 359 360 if (qcom_scm_set_cold_boot_addr(secondary_startup_arm)) { 361 for_each_present_cpu(cpu) { 362 if (cpu == smp_processor_id()) 363 continue; 364 set_cpu_present(cpu, false); 365 } 366 pr_warn("Failed to set CPU boot address, disabling SMP\n"); 367 } 368} 369 370static const struct smp_operations smp_msm8660_ops __initconst = { 371 .smp_prepare_cpus = qcom_smp_prepare_cpus, 372 .smp_boot_secondary = msm8660_boot_secondary, 373#ifdef CONFIG_HOTPLUG_CPU 374 .cpu_die = qcom_cpu_die, 375#endif 376}; 377CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops); 378 379static const struct smp_operations qcom_smp_cortex_a7_ops __initconst = { 380 .smp_prepare_cpus = qcom_smp_prepare_cpus, 381 .smp_boot_secondary = cortex_a7_boot_secondary, 382#ifdef CONFIG_HOTPLUG_CPU 383 .cpu_die = qcom_cpu_die, 384#endif 385}; 386CPU_METHOD_OF_DECLARE(qcom_smp_msm8226, "qcom,msm8226-smp", &qcom_smp_cortex_a7_ops); 387CPU_METHOD_OF_DECLARE(qcom_smp_msm8916, "qcom,msm8916-smp", &qcom_smp_cortex_a7_ops); 388 389static const struct smp_operations qcom_smp_kpssv1_ops __initconst = { 390 .smp_prepare_cpus = qcom_smp_prepare_cpus, 391 .smp_boot_secondary = kpssv1_boot_secondary, 392#ifdef CONFIG_HOTPLUG_CPU 393 .cpu_die = qcom_cpu_die, 394#endif 395}; 396CPU_METHOD_OF_DECLARE(qcom_smp_kpssv1, "qcom,kpss-acc-v1", &qcom_smp_kpssv1_ops); 397 398static const struct smp_operations qcom_smp_kpssv2_ops __initconst = { 399 .smp_prepare_cpus = qcom_smp_prepare_cpus, 400 .smp_boot_secondary = kpssv2_boot_secondary, 401#ifdef CONFIG_HOTPLUG_CPU 402 .cpu_die = qcom_cpu_die, 403#endif 404}; 405CPU_METHOD_OF_DECLARE(qcom_smp_kpssv2, "qcom,kpss-acc-v2", &qcom_smp_kpssv2_ops);