gpio-cfg-helpers.h (5572B)
1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * Copyright 2008 Openmoko, Inc. 4 * Copyright 2008 Simtec Electronics 5 * http://armlinux.simtec.co.uk/ 6 * Ben Dooks <ben@simtec.co.uk> 7 * 8 * Samsung Platform - GPIO pin configuration helper definitions 9 */ 10 11/* This is meant for core cpu support, machine or other driver files 12 * should not be including this header. 13 */ 14 15#ifndef __PLAT_GPIO_CFG_HELPERS_H 16#define __PLAT_GPIO_CFG_HELPERS_H __FILE__ 17 18/* As a note, all gpio configuration functions are entered exclusively, either 19 * with the relevant lock held or the system prevented from doing anything else 20 * by disabling interrupts. 21*/ 22 23static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip, 24 unsigned int off, unsigned int config) 25{ 26 return (chip->config->set_config)(chip, off, config); 27} 28 29static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip, 30 unsigned int off) 31{ 32 return (chip->config->get_config)(chip, off); 33} 34 35static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip, 36 unsigned int off, samsung_gpio_pull_t pull) 37{ 38 return (chip->config->set_pull)(chip, off, pull); 39} 40 41static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip, 42 unsigned int off) 43{ 44 return chip->config->get_pull(chip, off); 45} 46 47/* Pull-{up,down} resistor controls. 48 * 49 * S3C2410,S3C2440 = Pull-UP, 50 * S3C2412,S3C2413 = Pull-Down 51 * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef] 52 * S3C2443 = Pull-Both [not same as S3C6400] 53 */ 54 55/** 56 * s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none. 57 * @chip: The gpio chip that is being configured. 58 * @off: The offset for the GPIO being configured. 59 * @param: pull: The pull mode being requested. 60 * 61 * This is a helper function for the case where we have GPIOs with one 62 * bit configuring the presence of a pull-up resistor. 63 */ 64extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip, 65 unsigned int off, samsung_gpio_pull_t pull); 66 67/** 68 * s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none 69 * @chip: The gpio chip that is being configured 70 * @off: The offset for the GPIO being configured 71 * @param: pull: The pull mode being requested 72 * 73 * This is a helper function for the case where we have GPIOs with one 74 * bit configuring the presence of a pull-down resistor. 75 */ 76extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip, 77 unsigned int off, samsung_gpio_pull_t pull); 78 79/** 80 * samsung_gpio_setpull_upown() - Pull configuration for choice of up, 81 * down or none 82 * 83 * @chip: The gpio chip that is being configured. 84 * @off: The offset for the GPIO being configured. 85 * @param: pull: The pull mode being requested. 86 * 87 * This is a helper function for the case where we have GPIOs with two 88 * bits configuring the presence of a pull resistor, in the following 89 * order: 90 * 00 = No pull resistor connected 91 * 01 = Pull-up resistor connected 92 * 10 = Pull-down resistor connected 93 */ 94extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip, 95 unsigned int off, samsung_gpio_pull_t pull); 96 97/** 98 * samsung_gpio_getpull_updown() - Get configuration for choice of up, 99 * down or none 100 * 101 * @chip: The gpio chip that the GPIO pin belongs to 102 * @off: The offset to the pin to get the configuration of. 103 * 104 * This helper function reads the state of the pull-{up,down} resistor 105 * for the given GPIO in the same case as samsung_gpio_setpull_upown. 106*/ 107extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip, 108 unsigned int off); 109 110/** 111 * s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none 112 * @chip: The gpio chip that the GPIO pin belongs to 113 * @off: The offset to the pin to get the configuration of. 114 * 115 * This helper function reads the state of the pull-up resistor for the 116 * given GPIO in the same case as s3c24xx_gpio_setpull_1up. 117*/ 118extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip, 119 unsigned int off); 120 121/** 122 * s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none 123 * @chip: The gpio chip that the GPIO pin belongs to 124 * @off: The offset to the pin to get the configuration of. 125 * 126 * This helper function reads the state of the pull-down resistor for the 127 * given GPIO in the same case as s3c24xx_gpio_setpull_1down. 128*/ 129extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip, 130 unsigned int off); 131 132/** 133 * s3c2443_gpio_setpull() - Pull configuration for s3c2443. 134 * @chip: The gpio chip that is being configured. 135 * @off: The offset for the GPIO being configured. 136 * @param: pull: The pull mode being requested. 137 * 138 * This is a helper function for the case where we have GPIOs with two 139 * bits configuring the presence of a pull resistor, in the following 140 * order: 141 * 00 = Pull-up resistor connected 142 * 10 = Pull-down resistor connected 143 * x1 = No pull up resistor 144 */ 145extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip, 146 unsigned int off, samsung_gpio_pull_t pull); 147 148/** 149 * s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors 150 * @chip: The gpio chip that the GPIO pin belongs to. 151 * @off: The offset to the pin to get the configuration of. 152 * 153 * This helper function reads the state of the pull-{up,down} resistor for the 154 * given GPIO in the same case as samsung_gpio_setpull_upown. 155*/ 156extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip, 157 unsigned int off); 158 159#endif /* __PLAT_GPIO_CFG_HELPERS_H */