irqs.h (3143B)
1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * arch/arm/mach-sa1100/include/mach/irqs.h 4 * 5 * Copyright (C) 1996 Russell King 6 * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus). 7 * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation) 8 * 9 * 2001/11/14 RMK Cleaned up and standardised a lot of the IRQs. 10 */ 11 12#define IRQ_GPIO0_SC 1 13#define IRQ_GPIO1_SC 2 14#define IRQ_GPIO2_SC 3 15#define IRQ_GPIO3_SC 4 16#define IRQ_GPIO4_SC 5 17#define IRQ_GPIO5_SC 6 18#define IRQ_GPIO6_SC 7 19#define IRQ_GPIO7_SC 8 20#define IRQ_GPIO8_SC 9 21#define IRQ_GPIO9_SC 10 22#define IRQ_GPIO10_SC 11 23#define IRQ_GPIO11_27 12 24#define IRQ_LCD 13 /* LCD controller */ 25#define IRQ_Ser0UDC 14 /* Ser. port 0 UDC */ 26#define IRQ_Ser1SDLC 15 /* Ser. port 1 SDLC */ 27#define IRQ_Ser1UART 16 /* Ser. port 1 UART */ 28#define IRQ_Ser2ICP 17 /* Ser. port 2 ICP */ 29#define IRQ_Ser3UART 18 /* Ser. port 3 UART */ 30#define IRQ_Ser4MCP 19 /* Ser. port 4 MCP */ 31#define IRQ_Ser4SSP 20 /* Ser. port 4 SSP */ 32#define IRQ_DMA0 21 /* DMA controller channel 0 */ 33#define IRQ_DMA1 22 /* DMA controller channel 1 */ 34#define IRQ_DMA2 23 /* DMA controller channel 2 */ 35#define IRQ_DMA3 24 /* DMA controller channel 3 */ 36#define IRQ_DMA4 25 /* DMA controller channel 4 */ 37#define IRQ_DMA5 26 /* DMA controller channel 5 */ 38#define IRQ_OST0 27 /* OS Timer match 0 */ 39#define IRQ_OST1 28 /* OS Timer match 1 */ 40#define IRQ_OST2 29 /* OS Timer match 2 */ 41#define IRQ_OST3 30 /* OS Timer match 3 */ 42#define IRQ_RTC1Hz 31 /* RTC 1 Hz clock */ 43#define IRQ_RTCAlrm 32 /* RTC Alarm */ 44 45#define IRQ_GPIO0 33 46#define IRQ_GPIO1 34 47#define IRQ_GPIO2 35 48#define IRQ_GPIO3 36 49#define IRQ_GPIO4 37 50#define IRQ_GPIO5 38 51#define IRQ_GPIO6 39 52#define IRQ_GPIO7 40 53#define IRQ_GPIO8 41 54#define IRQ_GPIO9 42 55#define IRQ_GPIO10 43 56#define IRQ_GPIO11 44 57#define IRQ_GPIO12 45 58#define IRQ_GPIO13 46 59#define IRQ_GPIO14 47 60#define IRQ_GPIO15 48 61#define IRQ_GPIO16 49 62#define IRQ_GPIO17 50 63#define IRQ_GPIO18 51 64#define IRQ_GPIO19 52 65#define IRQ_GPIO20 53 66#define IRQ_GPIO21 54 67#define IRQ_GPIO22 55 68#define IRQ_GPIO23 56 69#define IRQ_GPIO24 57 70#define IRQ_GPIO25 58 71#define IRQ_GPIO26 59 72#define IRQ_GPIO27 60 73 74/* 75 * The next 16 interrupts are for board specific purposes. Since 76 * the kernel can only run on one machine at a time, we can re-use 77 * these. If you need more, increase IRQ_BOARD_END, but keep it 78 * within sensible limits. IRQs 61 to 76 are available. 79 */ 80#define IRQ_BOARD_START 61 81#define IRQ_BOARD_END 77 82 83/* 84 * Figure out the MAX IRQ number. 85 * 86 * Neponset, SA1111 and UCB1x00 are sparse IRQ aware, so can dynamically 87 * allocate their IRQs above NR_IRQS. 88 * 89 * LoCoMo has 4 additional IRQs, but is not sparse IRQ aware, and so has 90 * to be included in the NR_IRQS calculation. 91 */ 92#ifdef CONFIG_SHARP_LOCOMO 93#define NR_IRQS_LOCOMO 4 94#else 95#define NR_IRQS_LOCOMO 0 96#endif 97 98#ifndef NR_IRQS 99#define NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO) 100#endif 101#define SA1100_NR_IRQS (IRQ_BOARD_START + NR_IRQS_LOCOMO)