proc-arm720.S (5372B)
1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * linux/arch/arm/mm/proc-arm720.S: MMU functions for ARM720 4 * 5 * Copyright (C) 2000 Steve Hill (sjhill@cotw.com) 6 * Rob Scott (rscott@mtrob.fdns.net) 7 * Copyright (C) 2000 ARM Limited, Deep Blue Solutions Ltd. 8 * hacked for non-paged-MM by Hyok S. Choi, 2004. 9 * 10 * These are the low level assembler for performing cache and TLB 11 * functions on the ARM720T. The ARM720T has a writethrough IDC 12 * cache, so we don't need to clean it. 13 * 14 * Changelog: 15 * 05-09-2000 SJH Created by moving 720 specific functions 16 * out of 'proc-arm6,7.S' per RMK discussion 17 * 07-25-2000 SJH Added idle function. 18 * 08-25-2000 DBS Updated for integration of ARM Ltd version. 19 * 04-20-2004 HSC modified for non-paged memory management mode. 20 */ 21#include <linux/linkage.h> 22#include <linux/init.h> 23#include <linux/pgtable.h> 24#include <asm/assembler.h> 25#include <asm/asm-offsets.h> 26#include <asm/hwcap.h> 27#include <asm/pgtable-hwdef.h> 28#include <asm/ptrace.h> 29 30#include "proc-macros.S" 31 32/* 33 * Function: arm720_proc_init (void) 34 * : arm720_proc_fin (void) 35 * 36 * Notes : This processor does not require these 37 */ 38ENTRY(cpu_arm720_dcache_clean_area) 39ENTRY(cpu_arm720_proc_init) 40 ret lr 41 42ENTRY(cpu_arm720_proc_fin) 43 mrc p15, 0, r0, c1, c0, 0 44 bic r0, r0, #0x1000 @ ...i............ 45 bic r0, r0, #0x000e @ ............wca. 46 mcr p15, 0, r0, c1, c0, 0 @ disable caches 47 ret lr 48 49/* 50 * Function: arm720_proc_do_idle(void) 51 * Params : r0 = unused 52 * Purpose : put the processor in proper idle mode 53 */ 54ENTRY(cpu_arm720_do_idle) 55 ret lr 56 57/* 58 * Function: arm720_switch_mm(unsigned long pgd_phys) 59 * Params : pgd_phys Physical address of page table 60 * Purpose : Perform a task switch, saving the old process' state and restoring 61 * the new. 62 */ 63ENTRY(cpu_arm720_switch_mm) 64#ifdef CONFIG_MMU 65 mov r1, #0 66 mcr p15, 0, r1, c7, c7, 0 @ invalidate cache 67 mcr p15, 0, r0, c2, c0, 0 @ update page table ptr 68 mcr p15, 0, r1, c8, c7, 0 @ flush TLB (v4) 69#endif 70 ret lr 71 72/* 73 * Function: arm720_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext) 74 * Params : r0 = Address to set 75 * : r1 = value to set 76 * Purpose : Set a PTE and flush it out of any WB cache 77 */ 78 .align 5 79ENTRY(cpu_arm720_set_pte_ext) 80#ifdef CONFIG_MMU 81 armv3_set_pte_ext wc_disable=0 82#endif 83 ret lr 84 85/* 86 * Function: arm720_reset 87 * Params : r0 = address to jump to 88 * Notes : This sets up everything for a reset 89 */ 90 .pushsection .idmap.text, "ax" 91ENTRY(cpu_arm720_reset) 92 mov ip, #0 93 mcr p15, 0, ip, c7, c7, 0 @ invalidate cache 94#ifdef CONFIG_MMU 95 mcr p15, 0, ip, c8, c7, 0 @ flush TLB (v4) 96#endif 97 mrc p15, 0, ip, c1, c0, 0 @ get ctrl register 98 bic ip, ip, #0x000f @ ............wcam 99 bic ip, ip, #0x2100 @ ..v....s........ 100 mcr p15, 0, ip, c1, c0, 0 @ ctrl register 101 ret r0 102ENDPROC(cpu_arm720_reset) 103 .popsection 104 105 .type __arm710_setup, #function 106__arm710_setup: 107 mov r0, #0 108 mcr p15, 0, r0, c7, c7, 0 @ invalidate caches 109#ifdef CONFIG_MMU 110 mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4) 111#endif 112 mrc p15, 0, r0, c1, c0 @ get control register 113 ldr r5, arm710_cr1_clear 114 bic r0, r0, r5 115 ldr r5, arm710_cr1_set 116 orr r0, r0, r5 117 ret lr @ __ret (head.S) 118 .size __arm710_setup, . - __arm710_setup 119 120 /* 121 * R 122 * .RVI ZFRS BLDP WCAM 123 * .... 0001 ..11 1101 124 * 125 */ 126 .type arm710_cr1_clear, #object 127 .type arm710_cr1_set, #object 128arm710_cr1_clear: 129 .word 0x0f3f 130arm710_cr1_set: 131 .word 0x013d 132 133 .type __arm720_setup, #function 134__arm720_setup: 135 mov r0, #0 136 mcr p15, 0, r0, c7, c7, 0 @ invalidate caches 137#ifdef CONFIG_MMU 138 mcr p15, 0, r0, c8, c7, 0 @ flush TLB (v4) 139#endif 140 adr r5, arm720_crval 141 ldmia r5, {r5, r6} 142 mrc p15, 0, r0, c1, c0 @ get control register 143 bic r0, r0, r5 144 orr r0, r0, r6 145 ret lr @ __ret (head.S) 146 .size __arm720_setup, . - __arm720_setup 147 148 /* 149 * R 150 * .RVI ZFRS BLDP WCAM 151 * ..1. 1001 ..11 1101 152 * 153 */ 154 .type arm720_crval, #object 155arm720_crval: 156 crval clear=0x00002f3f, mmuset=0x0000213d, ucset=0x00000130 157 158 __INITDATA 159 @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) 160 define_processor_functions arm720, dabort=v4t_late_abort, pabort=legacy_pabort 161 162 .section ".rodata" 163 164 string cpu_arch_name, "armv4t" 165 string cpu_elf_name, "v4" 166 string cpu_arm710_name, "ARM710T" 167 string cpu_arm720_name, "ARM720T" 168 169 .align 170 171/* 172 * See <asm/procinfo.h> for a definition of this structure. 173 */ 174 175 .section ".proc.info.init", "a" 176 177.macro arm720_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cpu_flush:req 178 .type __\name\()_proc_info,#object 179__\name\()_proc_info: 180 .long \cpu_val 181 .long \cpu_mask 182 .long PMD_TYPE_SECT | \ 183 PMD_SECT_BUFFERABLE | \ 184 PMD_SECT_CACHEABLE | \ 185 PMD_BIT4 | \ 186 PMD_SECT_AP_WRITE | \ 187 PMD_SECT_AP_READ 188 .long PMD_TYPE_SECT | \ 189 PMD_BIT4 | \ 190 PMD_SECT_AP_WRITE | \ 191 PMD_SECT_AP_READ 192 initfn \cpu_flush, __\name\()_proc_info @ cpu_flush 193 .long cpu_arch_name @ arch_name 194 .long cpu_elf_name @ elf_name 195 .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB @ elf_hwcap 196 .long \cpu_name 197 .long arm720_processor_functions 198 .long v4_tlb_fns 199 .long v4wt_user_fns 200 .long v4_cache_fns 201 .size __\name\()_proc_info, . - __\name\()_proc_info 202.endm 203 204 arm720_proc_info arm710, 0x41807100, 0xffffff00, cpu_arm710_name, __arm710_setup 205 arm720_proc_info arm720, 0x41807200, 0xffffff00, cpu_arm720_name, __arm720_setup