fpopcode.h (14789B)
1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 NetWinder Floating Point Emulator 4 (c) Rebel.COM, 1998,1999 5 (c) Philip Blundell, 2001 6 7 Direct questions, comments to Scott Bambrough <scottb@netwinder.org> 8 9*/ 10 11#ifndef __FPOPCODE_H__ 12#define __FPOPCODE_H__ 13 14 15/* 16ARM Floating Point Instruction Classes 17| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 18|c o n d|1 1 0 P|U|u|W|L| Rn |v| Fd |0|0|0|1| o f f s e t | CPDT 19|c o n d|1 1 0 P|U|w|W|L| Rn |x| Fd |0|0|1|0| o f f s e t | CPDT (copro 2) 20| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 21|c o n d|1 1 1 0|a|b|c|d|e| Fn |j| Fd |0|0|0|1|f|g|h|0|i| Fm | CPDO 22|c o n d|1 1 1 0|a|b|c|L|e| Fn | Rd |0|0|0|1|f|g|h|1|i| Fm | CPRT 23|c o n d|1 1 1 0|a|b|c|1|e| Fn |1|1|1|1|0|0|0|1|f|g|h|1|i| Fm | comparisons 24| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 25 26CPDT data transfer instructions 27 LDF, STF, LFM (copro 2), SFM (copro 2) 28 29CPDO dyadic arithmetic instructions 30 ADF, MUF, SUF, RSF, DVF, RDF, 31 POW, RPW, RMF, FML, FDV, FRD, POL 32 33CPDO monadic arithmetic instructions 34 MVF, MNF, ABS, RND, SQT, LOG, LGN, EXP, 35 SIN, COS, TAN, ASN, ACS, ATN, URD, NRM 36 37CPRT joint arithmetic/data transfer instructions 38 FIX (arithmetic followed by load/store) 39 FLT (load/store followed by arithmetic) 40 CMF, CNF CMFE, CNFE (comparisons) 41 WFS, RFS (write/read floating point status register) 42 WFC, RFC (write/read floating point control register) 43 44cond condition codes 45P pre/post index bit: 0 = postindex, 1 = preindex 46U up/down bit: 0 = stack grows down, 1 = stack grows up 47W write back bit: 1 = update base register (Rn) 48L load/store bit: 0 = store, 1 = load 49Rn base register 50Rd destination/source register 51Fd floating point destination register 52Fn floating point source register 53Fm floating point source register or floating point constant 54 55uv transfer length (TABLE 1) 56wx register count (TABLE 2) 57abcd arithmetic opcode (TABLES 3 & 4) 58ef destination size (rounding precision) (TABLE 5) 59gh rounding mode (TABLE 6) 60j dyadic/monadic bit: 0 = dyadic, 1 = monadic 61i constant bit: 1 = constant (TABLE 6) 62*/ 63 64/* 65TABLE 1 66+-------------------------+---+---+---------+---------+ 67| Precision | u | v | FPSR.EP | length | 68+-------------------------+---+---+---------+---------+ 69| Single | 0 | 0 | x | 1 words | 70| Double | 1 | 1 | x | 2 words | 71| Extended | 1 | 1 | x | 3 words | 72| Packed decimal | 1 | 1 | 0 | 3 words | 73| Expanded packed decimal | 1 | 1 | 1 | 4 words | 74+-------------------------+---+---+---------+---------+ 75Note: x = don't care 76*/ 77 78/* 79TABLE 2 80+---+---+---------------------------------+ 81| w | x | Number of registers to transfer | 82+---+---+---------------------------------+ 83| 0 | 1 | 1 | 84| 1 | 0 | 2 | 85| 1 | 1 | 3 | 86| 0 | 0 | 4 | 87+---+---+---------------------------------+ 88*/ 89 90/* 91TABLE 3: Dyadic Floating Point Opcodes 92+---+---+---+---+----------+-----------------------+-----------------------+ 93| a | b | c | d | Mnemonic | Description | Operation | 94+---+---+---+---+----------+-----------------------+-----------------------+ 95| 0 | 0 | 0 | 0 | ADF | Add | Fd := Fn + Fm | 96| 0 | 0 | 0 | 1 | MUF | Multiply | Fd := Fn * Fm | 97| 0 | 0 | 1 | 0 | SUF | Subtract | Fd := Fn - Fm | 98| 0 | 0 | 1 | 1 | RSF | Reverse subtract | Fd := Fm - Fn | 99| 0 | 1 | 0 | 0 | DVF | Divide | Fd := Fn / Fm | 100| 0 | 1 | 0 | 1 | RDF | Reverse divide | Fd := Fm / Fn | 101| 0 | 1 | 1 | 0 | POW | Power | Fd := Fn ^ Fm | 102| 0 | 1 | 1 | 1 | RPW | Reverse power | Fd := Fm ^ Fn | 103| 1 | 0 | 0 | 0 | RMF | Remainder | Fd := IEEE rem(Fn/Fm) | 104| 1 | 0 | 0 | 1 | FML | Fast Multiply | Fd := Fn * Fm | 105| 1 | 0 | 1 | 0 | FDV | Fast Divide | Fd := Fn / Fm | 106| 1 | 0 | 1 | 1 | FRD | Fast reverse divide | Fd := Fm / Fn | 107| 1 | 1 | 0 | 0 | POL | Polar angle (ArcTan2) | Fd := arctan2(Fn,Fm) | 108| 1 | 1 | 0 | 1 | | undefined instruction | trap | 109| 1 | 1 | 1 | 0 | | undefined instruction | trap | 110| 1 | 1 | 1 | 1 | | undefined instruction | trap | 111+---+---+---+---+----------+-----------------------+-----------------------+ 112Note: POW, RPW, POL are deprecated, and are available for backwards 113 compatibility only. 114*/ 115 116/* 117TABLE 4: Monadic Floating Point Opcodes 118+---+---+---+---+----------+-----------------------+-----------------------+ 119| a | b | c | d | Mnemonic | Description | Operation | 120+---+---+---+---+----------+-----------------------+-----------------------+ 121| 0 | 0 | 0 | 0 | MVF | Move | Fd := Fm | 122| 0 | 0 | 0 | 1 | MNF | Move negated | Fd := - Fm | 123| 0 | 0 | 1 | 0 | ABS | Absolute value | Fd := abs(Fm) | 124| 0 | 0 | 1 | 1 | RND | Round to integer | Fd := int(Fm) | 125| 0 | 1 | 0 | 0 | SQT | Square root | Fd := sqrt(Fm) | 126| 0 | 1 | 0 | 1 | LOG | Log base 10 | Fd := log10(Fm) | 127| 0 | 1 | 1 | 0 | LGN | Log base e | Fd := ln(Fm) | 128| 0 | 1 | 1 | 1 | EXP | Exponent | Fd := e ^ Fm | 129| 1 | 0 | 0 | 0 | SIN | Sine | Fd := sin(Fm) | 130| 1 | 0 | 0 | 1 | COS | Cosine | Fd := cos(Fm) | 131| 1 | 0 | 1 | 0 | TAN | Tangent | Fd := tan(Fm) | 132| 1 | 0 | 1 | 1 | ASN | Arc Sine | Fd := arcsin(Fm) | 133| 1 | 1 | 0 | 0 | ACS | Arc Cosine | Fd := arccos(Fm) | 134| 1 | 1 | 0 | 1 | ATN | Arc Tangent | Fd := arctan(Fm) | 135| 1 | 1 | 1 | 0 | URD | Unnormalized round | Fd := int(Fm) | 136| 1 | 1 | 1 | 1 | NRM | Normalize | Fd := norm(Fm) | 137+---+---+---+---+----------+-----------------------+-----------------------+ 138Note: LOG, LGN, EXP, SIN, COS, TAN, ASN, ACS, ATN are deprecated, and are 139 available for backwards compatibility only. 140*/ 141 142/* 143TABLE 5 144+-------------------------+---+---+ 145| Rounding Precision | e | f | 146+-------------------------+---+---+ 147| IEEE Single precision | 0 | 0 | 148| IEEE Double precision | 0 | 1 | 149| IEEE Extended precision | 1 | 0 | 150| undefined (trap) | 1 | 1 | 151+-------------------------+---+---+ 152*/ 153 154/* 155TABLE 5 156+---------------------------------+---+---+ 157| Rounding Mode | g | h | 158+---------------------------------+---+---+ 159| Round to nearest (default) | 0 | 0 | 160| Round toward plus infinity | 0 | 1 | 161| Round toward negative infinity | 1 | 0 | 162| Round toward zero | 1 | 1 | 163+---------------------------------+---+---+ 164*/ 165 166/* 167=== 168=== Definitions for load and store instructions 169=== 170*/ 171 172/* bit masks */ 173#define BIT_PREINDEX 0x01000000 174#define BIT_UP 0x00800000 175#define BIT_WRITE_BACK 0x00200000 176#define BIT_LOAD 0x00100000 177 178/* masks for load/store */ 179#define MASK_CPDT 0x0c000000 /* data processing opcode */ 180#define MASK_OFFSET 0x000000ff 181#define MASK_TRANSFER_LENGTH 0x00408000 182#define MASK_REGISTER_COUNT MASK_TRANSFER_LENGTH 183#define MASK_COPROCESSOR 0x00000f00 184 185/* Tests for transfer length */ 186#define TRANSFER_SINGLE 0x00000000 187#define TRANSFER_DOUBLE 0x00008000 188#define TRANSFER_EXTENDED 0x00400000 189#define TRANSFER_PACKED MASK_TRANSFER_LENGTH 190 191/* Get the coprocessor number from the opcode. */ 192#define getCoprocessorNumber(opcode) ((opcode & MASK_COPROCESSOR) >> 8) 193 194/* Get the offset from the opcode. */ 195#define getOffset(opcode) (opcode & MASK_OFFSET) 196 197/* Tests for specific data transfer load/store opcodes. */ 198#define TEST_OPCODE(opcode,mask) (((opcode) & (mask)) == (mask)) 199 200#define LOAD_OP(opcode) TEST_OPCODE((opcode),MASK_CPDT | BIT_LOAD) 201#define STORE_OP(opcode) ((opcode & (MASK_CPDT | BIT_LOAD)) == MASK_CPDT) 202 203#define LDF_OP(opcode) (LOAD_OP(opcode) && (getCoprocessorNumber(opcode) == 1)) 204#define LFM_OP(opcode) (LOAD_OP(opcode) && (getCoprocessorNumber(opcode) == 2)) 205#define STF_OP(opcode) (STORE_OP(opcode) && (getCoprocessorNumber(opcode) == 1)) 206#define SFM_OP(opcode) (STORE_OP(opcode) && (getCoprocessorNumber(opcode) == 2)) 207 208#define PREINDEXED(opcode) ((opcode & BIT_PREINDEX) != 0) 209#define POSTINDEXED(opcode) ((opcode & BIT_PREINDEX) == 0) 210#define BIT_UP_SET(opcode) ((opcode & BIT_UP) != 0) 211#define BIT_UP_CLEAR(opcode) ((opcode & BIT_DOWN) == 0) 212#define WRITE_BACK(opcode) ((opcode & BIT_WRITE_BACK) != 0) 213#define LOAD(opcode) ((opcode & BIT_LOAD) != 0) 214#define STORE(opcode) ((opcode & BIT_LOAD) == 0) 215 216/* 217=== 218=== Definitions for arithmetic instructions 219=== 220*/ 221/* bit masks */ 222#define BIT_MONADIC 0x00008000 223#define BIT_CONSTANT 0x00000008 224 225#define CONSTANT_FM(opcode) ((opcode & BIT_CONSTANT) != 0) 226#define MONADIC_INSTRUCTION(opcode) ((opcode & BIT_MONADIC) != 0) 227 228/* instruction identification masks */ 229#define MASK_CPDO 0x0e000000 /* arithmetic opcode */ 230#define MASK_ARITHMETIC_OPCODE 0x00f08000 231#define MASK_DESTINATION_SIZE 0x00080080 232 233/* dyadic arithmetic opcodes. */ 234#define ADF_CODE 0x00000000 235#define MUF_CODE 0x00100000 236#define SUF_CODE 0x00200000 237#define RSF_CODE 0x00300000 238#define DVF_CODE 0x00400000 239#define RDF_CODE 0x00500000 240#define POW_CODE 0x00600000 241#define RPW_CODE 0x00700000 242#define RMF_CODE 0x00800000 243#define FML_CODE 0x00900000 244#define FDV_CODE 0x00a00000 245#define FRD_CODE 0x00b00000 246#define POL_CODE 0x00c00000 247/* 0x00d00000 is an invalid dyadic arithmetic opcode */ 248/* 0x00e00000 is an invalid dyadic arithmetic opcode */ 249/* 0x00f00000 is an invalid dyadic arithmetic opcode */ 250 251/* monadic arithmetic opcodes. */ 252#define MVF_CODE 0x00008000 253#define MNF_CODE 0x00108000 254#define ABS_CODE 0x00208000 255#define RND_CODE 0x00308000 256#define SQT_CODE 0x00408000 257#define LOG_CODE 0x00508000 258#define LGN_CODE 0x00608000 259#define EXP_CODE 0x00708000 260#define SIN_CODE 0x00808000 261#define COS_CODE 0x00908000 262#define TAN_CODE 0x00a08000 263#define ASN_CODE 0x00b08000 264#define ACS_CODE 0x00c08000 265#define ATN_CODE 0x00d08000 266#define URD_CODE 0x00e08000 267#define NRM_CODE 0x00f08000 268 269/* 270=== 271=== Definitions for register transfer and comparison instructions 272=== 273*/ 274 275#define MASK_CPRT 0x0e000010 /* register transfer opcode */ 276#define MASK_CPRT_CODE 0x00f00000 277#define FLT_CODE 0x00000000 278#define FIX_CODE 0x00100000 279#define WFS_CODE 0x00200000 280#define RFS_CODE 0x00300000 281#define WFC_CODE 0x00400000 282#define RFC_CODE 0x00500000 283#define CMF_CODE 0x00900000 284#define CNF_CODE 0x00b00000 285#define CMFE_CODE 0x00d00000 286#define CNFE_CODE 0x00f00000 287 288/* 289=== 290=== Common definitions 291=== 292*/ 293 294/* register masks */ 295#define MASK_Rd 0x0000f000 296#define MASK_Rn 0x000f0000 297#define MASK_Fd 0x00007000 298#define MASK_Fm 0x00000007 299#define MASK_Fn 0x00070000 300 301/* condition code masks */ 302#define CC_MASK 0xf0000000 303#define CC_NEGATIVE 0x80000000 304#define CC_ZERO 0x40000000 305#define CC_CARRY 0x20000000 306#define CC_OVERFLOW 0x10000000 307#define CC_EQ 0x00000000 308#define CC_NE 0x10000000 309#define CC_CS 0x20000000 310#define CC_HS CC_CS 311#define CC_CC 0x30000000 312#define CC_LO CC_CC 313#define CC_MI 0x40000000 314#define CC_PL 0x50000000 315#define CC_VS 0x60000000 316#define CC_VC 0x70000000 317#define CC_HI 0x80000000 318#define CC_LS 0x90000000 319#define CC_GE 0xa0000000 320#define CC_LT 0xb0000000 321#define CC_GT 0xc0000000 322#define CC_LE 0xd0000000 323#define CC_AL 0xe0000000 324#define CC_NV 0xf0000000 325 326/* rounding masks/values */ 327#define MASK_ROUNDING_MODE 0x00000060 328#define ROUND_TO_NEAREST 0x00000000 329#define ROUND_TO_PLUS_INFINITY 0x00000020 330#define ROUND_TO_MINUS_INFINITY 0x00000040 331#define ROUND_TO_ZERO 0x00000060 332 333#define MASK_ROUNDING_PRECISION 0x00080080 334#define ROUND_SINGLE 0x00000000 335#define ROUND_DOUBLE 0x00000080 336#define ROUND_EXTENDED 0x00080000 337 338/* Get the condition code from the opcode. */ 339#define getCondition(opcode) (opcode >> 28) 340 341/* Get the source register from the opcode. */ 342#define getRn(opcode) ((opcode & MASK_Rn) >> 16) 343 344/* Get the destination floating point register from the opcode. */ 345#define getFd(opcode) ((opcode & MASK_Fd) >> 12) 346 347/* Get the first source floating point register from the opcode. */ 348#define getFn(opcode) ((opcode & MASK_Fn) >> 16) 349 350/* Get the second source floating point register from the opcode. */ 351#define getFm(opcode) (opcode & MASK_Fm) 352 353/* Get the destination register from the opcode. */ 354#define getRd(opcode) ((opcode & MASK_Rd) >> 12) 355 356/* Get the rounding mode from the opcode. */ 357#define getRoundingMode(opcode) ((opcode & MASK_ROUNDING_MODE) >> 5) 358 359#ifdef CONFIG_FPE_NWFPE_XP 360static inline floatx80 __pure getExtendedConstant(const unsigned int nIndex) 361{ 362 extern const floatx80 floatx80Constant[]; 363 return floatx80Constant[nIndex]; 364} 365#endif 366 367static inline float64 __pure getDoubleConstant(const unsigned int nIndex) 368{ 369 extern const float64 float64Constant[]; 370 return float64Constant[nIndex]; 371} 372 373static inline float32 __pure getSingleConstant(const unsigned int nIndex) 374{ 375 extern const float32 float32Constant[]; 376 return float32Constant[nIndex]; 377} 378 379static inline unsigned int getTransferLength(const unsigned int opcode) 380{ 381 unsigned int nRc; 382 383 switch (opcode & MASK_TRANSFER_LENGTH) { 384 case 0x00000000: 385 nRc = 1; 386 break; /* single precision */ 387 case 0x00008000: 388 nRc = 2; 389 break; /* double precision */ 390 case 0x00400000: 391 nRc = 3; 392 break; /* extended precision */ 393 default: 394 nRc = 0; 395 } 396 397 return (nRc); 398} 399 400static inline unsigned int getRegisterCount(const unsigned int opcode) 401{ 402 unsigned int nRc; 403 404 switch (opcode & MASK_REGISTER_COUNT) { 405 case 0x00000000: 406 nRc = 4; 407 break; 408 case 0x00008000: 409 nRc = 1; 410 break; 411 case 0x00400000: 412 nRc = 2; 413 break; 414 case 0x00408000: 415 nRc = 3; 416 break; 417 default: 418 nRc = 0; 419 } 420 421 return (nRc); 422} 423 424static inline unsigned int getRoundingPrecision(const unsigned int opcode) 425{ 426 unsigned int nRc; 427 428 switch (opcode & MASK_ROUNDING_PRECISION) { 429 case 0x00000000: 430 nRc = 1; 431 break; 432 case 0x00000080: 433 nRc = 2; 434 break; 435 case 0x00080000: 436 nRc = 3; 437 break; 438 default: 439 nRc = 0; 440 } 441 442 return (nRc); 443} 444 445static inline unsigned int getDestinationSize(const unsigned int opcode) 446{ 447 unsigned int nRc; 448 449 switch (opcode & MASK_DESTINATION_SIZE) { 450 case 0x00000000: 451 nRc = typeSingle; 452 break; 453 case 0x00000080: 454 nRc = typeDouble; 455 break; 456 case 0x00080000: 457 nRc = typeExtended; 458 break; 459 default: 460 nRc = typeNone; 461 } 462 463 return (nRc); 464} 465 466extern const float64 float64Constant[]; 467extern const float32 float32Constant[]; 468 469#endif