cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

sun50i-h5-nanopi-neo-plus2.dts (3023B)

      1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
      2// Copyright (C) 2017 Antony Antony <antony@phenome.org>
      3// Copyright (C) 2016 ARM Ltd.
      4
      5/dts-v1/;
      6#include "sun50i-h5.dtsi"
      7
      8#include <dt-bindings/gpio/gpio.h>
      9#include <dt-bindings/input/input.h>
     10#include <dt-bindings/pinctrl/sun4i-a10.h>
     11
     12/ {
     13	model = "FriendlyARM NanoPi NEO Plus2";
     14	compatible = "friendlyarm,nanopi-neo-plus2", "allwinner,sun50i-h5";
     15
     16	aliases {
     17		ethernet0 = &emac;
     18		serial0 = &uart0;
     19	};
     20
     21	chosen {
     22		stdout-path = "serial0:115200n8";
     23	};
     24
     25	leds {
     26		compatible = "gpio-leds";
     27
     28		led-0 {
     29			label = "nanopi:green:pwr";
     30			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
     31			default-state = "on";
     32		};
     33
     34		led-1 {
     35			label = "nanopi:red:status";
     36			gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
     37		};
     38	};
     39
     40	reg_gmac_3v3: gmac-3v3 {
     41		compatible = "regulator-fixed";
     42		regulator-name = "gmac-3v3";
     43		regulator-min-microvolt = <3300000>;
     44		regulator-max-microvolt = <3300000>;
     45		startup-delay-us = <100000>;
     46		enable-active-high;
     47		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
     48	};
     49
     50	reg_vcc3v3: vcc3v3 {
     51		compatible = "regulator-fixed";
     52		regulator-name = "vcc3v3";
     53		regulator-min-microvolt = <3300000>;
     54		regulator-max-microvolt = <3300000>;
     55	};
     56
     57	vdd_cpux: gpio-regulator {
     58		compatible = "regulator-gpio";
     59		regulator-name = "vdd-cpux";
     60		regulator-type = "voltage";
     61		regulator-boot-on;
     62		regulator-always-on;
     63		regulator-min-microvolt = <1100000>;
     64		regulator-max-microvolt = <1300000>;
     65		regulator-ramp-delay = <50>; /* 4ms */
     66		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
     67		gpios-states = <0x1>;
     68		states = <1100000 0>, <1300000 1>;
     69	};
     70
     71	wifi_pwrseq: wifi_pwrseq {
     72		compatible = "mmc-pwrseq-simple";
     73		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
     74		post-power-on-delay-ms = <200>;
     75	};
     76};
     77
     78&codec {
     79	allwinner,audio-routing =
     80		"Line Out", "LINEOUT",
     81		"MIC1", "Mic",
     82		"Mic",  "MBIAS";
     83	status = "okay";
     84};
     85
     86&ehci0 {
     87	status = "okay";
     88};
     89
     90&ehci3 {
     91	status = "okay";
     92};
     93
     94&emac {
     95	pinctrl-names = "default";
     96	pinctrl-0 = <&emac_rgmii_pins>;
     97	phy-supply = <&reg_gmac_3v3>;
     98	phy-handle = <&ext_rgmii_phy>;
     99	phy-mode = "rgmii-id";
    100	status = "okay";
    101};
    102
    103&external_mdio {
    104	ext_rgmii_phy: ethernet-phy@7 {
    105		compatible = "ethernet-phy-ieee802.3-c22";
    106		reg = <7>;
    107	};
    108};
    109
    110&mmc0 {
    111	vmmc-supply = <&reg_vcc3v3>;
    112	bus-width = <4>;
    113	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
    114	status = "okay";
    115};
    116
    117&mmc1 {
    118	vmmc-supply = <&reg_vcc3v3>;
    119	vqmmc-supply = <&reg_vcc3v3>;
    120	mmc-pwrseq = <&wifi_pwrseq>;
    121	bus-width = <4>;
    122	non-removable;
    123	status = "okay";
    124
    125	brcmf: wifi@1 {
    126		reg = <1>;
    127		compatible = "brcm,bcm4329-fmac";
    128	};
    129};
    130
    131&mmc2 {
    132	pinctrl-names = "default";
    133	pinctrl-0 = <&mmc2_8bit_pins>;
    134	vmmc-supply = <&reg_vcc3v3>;
    135	bus-width = <8>;
    136	non-removable;
    137	cap-mmc-hw-reset;
    138	status = "okay";
    139};
    140
    141&ohci0 {
    142	status = "okay";
    143};
    144
    145&ohci3 {
    146	status = "okay";
    147};
    148
    149&uart0 {
    150	pinctrl-names = "default";
    151	pinctrl-0 = <&uart0_pa_pins>;
    152	status = "okay";
    153};
    154
    155&usb_otg {
    156	dr_mode = "host";
    157	status = "okay";
    158};
    159
    160&usbphy {
    161	/* USB Type-A ports' VBUS is always on */
    162	status = "okay";
    163};