cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

sun50i-h5-nanopi-neo2.dts (2199B)

      1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
      2// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
      3
      4/dts-v1/;
      5#include "sun50i-h5.dtsi"
      6
      7#include <dt-bindings/gpio/gpio.h>
      8
      9/ {
     10	model = "FriendlyARM NanoPi NEO 2";
     11	compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
     12
     13	aliases {
     14		ethernet0 = &emac;
     15		serial0 = &uart0;
     16	};
     17
     18	chosen {
     19		stdout-path = "serial0:115200n8";
     20	};
     21
     22	leds {
     23		compatible = "gpio-leds";
     24
     25		led-0 {
     26			label = "nanopi:green:pwr";
     27			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
     28			default-state = "on";
     29		};
     30
     31		led-1 {
     32			label = "nanopi:blue:status";
     33			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
     34		};
     35	};
     36
     37	reg_gmac_3v3: gmac-3v3 {
     38		compatible = "regulator-fixed";
     39		regulator-name = "gmac-3v3";
     40		regulator-min-microvolt = <3300000>;
     41		regulator-max-microvolt = <3300000>;
     42		startup-delay-us = <100000>;
     43		enable-active-high;
     44		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
     45	};
     46
     47	reg_vcc3v3: vcc3v3 {
     48		compatible = "regulator-fixed";
     49		regulator-name = "vcc3v3";
     50		regulator-min-microvolt = <3300000>;
     51		regulator-max-microvolt = <3300000>;
     52	};
     53
     54	reg_usb0_vbus: usb0-vbus {
     55		compatible = "regulator-fixed";
     56		regulator-name = "usb0-vbus";
     57		regulator-min-microvolt = <5000000>;
     58		regulator-max-microvolt = <5000000>;
     59		enable-active-high;
     60		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
     61		status = "okay";
     62	};
     63};
     64
     65&ehci0 {
     66	status = "okay";
     67};
     68
     69&ehci3 {
     70	status = "okay";
     71};
     72
     73&emac {
     74	pinctrl-names = "default";
     75	pinctrl-0 = <&emac_rgmii_pins>;
     76	phy-supply = <&reg_gmac_3v3>;
     77	phy-handle = <&ext_rgmii_phy>;
     78	phy-mode = "rgmii-id";
     79	status = "okay";
     80};
     81
     82&external_mdio {
     83	ext_rgmii_phy: ethernet-phy@7 {
     84		compatible = "ethernet-phy-ieee802.3-c22";
     85		reg = <7>;
     86	};
     87};
     88
     89&mmc0 {
     90	vmmc-supply = <&reg_vcc3v3>;
     91	bus-width = <4>;
     92	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
     93	status = "okay";
     94};
     95
     96&ohci0 {
     97	status = "okay";
     98};
     99
    100&ohci3 {
    101	status = "okay";
    102};
    103
    104&uart0 {
    105	pinctrl-names = "default";
    106	pinctrl-0 = <&uart0_pa_pins>;
    107	status = "okay";
    108};
    109
    110&usb_otg {
    111	dr_mode = "otg";
    112	status = "okay";
    113};
    114
    115&usbphy {
    116	/* USB Type-A port's VBUS is always on */
    117	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
    118	usb0_vbus-supply = <&reg_usb0_vbus>;
    119	status = "okay";
    120};