cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

sun50i-h5-orangepi-prime.dts (3518B)

      1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
      2// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
      3// Based on sun50i-h5-orangepi-pc2.dts, which is:
      4//   Copyright (C) 2016 ARM Ltd.
      5
      6/dts-v1/;
      7#include "sun50i-h5.dtsi"
      8
      9#include <dt-bindings/gpio/gpio.h>
     10#include <dt-bindings/input/input.h>
     11
     12/ {
     13	model = "Xunlong Orange Pi Prime";
     14	compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
     15
     16	aliases {
     17		ethernet0 = &emac;
     18		serial0 = &uart0;
     19	};
     20
     21	chosen {
     22		stdout-path = "serial0:115200n8";
     23	};
     24
     25	connector {
     26		compatible = "hdmi-connector";
     27		type = "a";
     28
     29		port {
     30			hdmi_con_in: endpoint {
     31				remote-endpoint = <&hdmi_out_con>;
     32			};
     33		};
     34	};
     35
     36	leds {
     37		compatible = "gpio-leds";
     38
     39		led-0 {
     40			label = "orangepi:green:pwr";
     41			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
     42			default-state = "on";
     43		};
     44
     45		led-1 {
     46			label = "orangepi:red:status";
     47			gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
     48		};
     49	};
     50
     51	r-gpio-keys {
     52		compatible = "gpio-keys";
     53
     54		sw4 {
     55			label = "sw4";
     56			linux,code = <BTN_0>;
     57			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
     58		};
     59	};
     60
     61	reg_gmac_3v3: gmac-3v3 {
     62		compatible = "regulator-fixed";
     63		regulator-name = "gmac-3v3";
     64		regulator-min-microvolt = <3300000>;
     65		regulator-max-microvolt = <3300000>;
     66		startup-delay-us = <100000>;
     67		enable-active-high;
     68		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
     69	};
     70
     71	reg_vcc3v3: vcc3v3 {
     72		compatible = "regulator-fixed";
     73		regulator-name = "vcc3v3";
     74		regulator-min-microvolt = <3300000>;
     75		regulator-max-microvolt = <3300000>;
     76	};
     77
     78	reg_usb0_vbus: usb0-vbus {
     79		compatible = "regulator-fixed";
     80		regulator-name = "usb0-vbus";
     81		regulator-min-microvolt = <5000000>;
     82		regulator-max-microvolt = <5000000>;
     83		enable-active-high;
     84		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
     85		status = "okay";
     86	};
     87
     88	wifi_pwrseq: wifi_pwrseq {
     89		compatible = "mmc-pwrseq-simple";
     90		reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */
     91	};
     92};
     93
     94&codec {
     95	allwinner,audio-routing =
     96		"Line Out", "LINEOUT",
     97		"MIC1", "Mic",
     98		"Mic",  "MBIAS";
     99	status = "okay";
    100};
    101
    102&de {
    103	status = "okay";
    104};
    105
    106&ehci0 {
    107	status = "okay";
    108};
    109
    110&ehci1 {
    111	status = "okay";
    112};
    113
    114&ehci2 {
    115	status = "okay";
    116};
    117
    118&ehci3 {
    119	status = "okay";
    120};
    121
    122&emac {
    123	pinctrl-names = "default";
    124	pinctrl-0 = <&emac_rgmii_pins>;
    125	phy-supply = <&reg_gmac_3v3>;
    126	phy-handle = <&ext_rgmii_phy>;
    127	phy-mode = "rgmii-id";
    128	status = "okay";
    129};
    130
    131&external_mdio {
    132	ext_rgmii_phy: ethernet-phy@1 {
    133		compatible = "ethernet-phy-ieee802.3-c22";
    134		reg = <1>;
    135	};
    136};
    137
    138&hdmi {
    139	status = "okay";
    140};
    141
    142&hdmi_out {
    143	hdmi_out_con: endpoint {
    144		remote-endpoint = <&hdmi_con_in>;
    145	};
    146};
    147
    148&ir {
    149	pinctrl-names = "default";
    150	pinctrl-0 = <&r_ir_rx_pin>;
    151	status = "okay";
    152};
    153
    154&mmc0 {
    155	vmmc-supply = <&reg_vcc3v3>;
    156	bus-width = <4>;
    157	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
    158	status = "okay";
    159};
    160
    161&mmc1 {
    162	vmmc-supply = <&reg_vcc3v3>;
    163	mmc-pwrseq = <&wifi_pwrseq>;
    164	bus-width = <4>;
    165	non-removable;
    166	status = "okay";
    167};
    168
    169&ohci0 {
    170	status = "okay";
    171};
    172
    173&ohci1 {
    174	status = "okay";
    175};
    176
    177&ohci2 {
    178	status = "okay";
    179};
    180
    181&ohci3 {
    182	status = "okay";
    183};
    184
    185&uart0 {
    186	pinctrl-names = "default";
    187	pinctrl-0 = <&uart0_pa_pins>;
    188	status = "okay";
    189};
    190
    191&uart1 {
    192	pinctrl-names = "default";
    193	pinctrl-0 = <&uart1_pins>;
    194	status = "disabled";
    195};
    196
    197&uart2 {
    198	pinctrl-names = "default";
    199	pinctrl-0 = <&uart2_pins>;
    200	status = "disabled";
    201};
    202
    203&usb_otg {
    204	dr_mode = "otg";
    205	status = "okay";
    206};
    207
    208&usbphy {
    209	/* USB Type-A ports' VBUS is always on */
    210	usb0_id_det-gpios = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
    211	usb0_vbus-supply = <&reg_usb0_vbus>;
    212	status = "okay";
    213};