cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

sun50i-h6-orangepi-lite2.dts (1677B)

      1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
      2// Copyright (C) 2018 Jagan Teki <jagan@openedev.com>
      3
      4#include "sun50i-h6-orangepi.dtsi"
      5
      6/ {
      7	model = "OrangePi Lite2";
      8	compatible = "xunlong,orangepi-lite2", "allwinner,sun50i-h6";
      9
     10	aliases {
     11		serial1 = &uart1; /* BT-UART */
     12	};
     13
     14	wifi_pwrseq: wifi_pwrseq {
     15		compatible = "mmc-pwrseq-simple";
     16		clocks = <&rtc 1>;
     17		clock-names = "ext_clock";
     18		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
     19		post-power-on-delay-ms = <200>;
     20	};
     21};
     22
     23&mmc1 {
     24	vmmc-supply = <&reg_cldo2>;
     25	vqmmc-supply = <&reg_bldo3>;
     26	mmc-pwrseq = <&wifi_pwrseq>;
     27	bus-width = <4>;
     28	non-removable;
     29	status = "okay";
     30
     31	brcm: sdio-wifi@1 {
     32		reg = <1>;
     33		compatible = "brcm,bcm4329-fmac";
     34		interrupt-parent = <&r_pio>;
     35		interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>;	/* PM0 */
     36		interrupt-names = "host-wake";
     37	};
     38};
     39
     40&reg_cldo2 {
     41	/*
     42	 * This regulator is connected with CLDO3.
     43	 * Before the kernel can support synchronized
     44	 * enable of coupled regulators, keep them
     45	 * both always on as a ugly hack.
     46	 */
     47	regulator-always-on;
     48};
     49
     50&reg_cldo3 {
     51	/*
     52	 * This regulator is connected with CLDO2.
     53	 * See the comments for CLDO2.
     54	 */
     55	regulator-always-on;
     56};
     57
     58/* There's the BT part of the AP6255 connected to that UART */
     59&uart1 {
     60	pinctrl-names = "default";
     61	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
     62	uart-has-rtscts;
     63	status = "okay";
     64
     65	bluetooth {
     66		compatible = "brcm,bcm4345c5";
     67		clocks = <&rtc 1>;
     68		clock-names = "lpo";
     69		device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
     70		host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
     71		shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
     72		max-speed = <1500000>;
     73	};
     74};