cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

meson-gxl-s905d-sml5442tw.dts (1713B)

      1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
      2/*
      3 * Copyright (c) Christian Hewitt <christianshewitt@gmail.com>
      4 */
      5
      6/dts-v1/;
      7
      8#include "meson-gxl-s905d.dtsi"
      9#include "meson-gx-p23x-q20x.dtsi"
     10#include <dt-bindings/leds/common.h>
     11
     12/ {
     13	compatible = "smartlabs,sml5442tw", "amlogic,s905d", "amlogic,meson-gxl";
     14	model = "SmartLabs SML-5442TW";
     15
     16	leds {
     17		compatible = "gpio-leds";
     18
     19		led-yellow {
     20			color = <LED_COLOR_ID_YELLOW>;
     21			function = LED_FUNCTION_STATUS;
     22			gpios = <&gpio_ao GPIOAO_6 GPIO_ACTIVE_HIGH>;
     23			default-state = "off";
     24		};
     25
     26		led-blue {
     27			color = <LED_COLOR_ID_BLUE>;
     28			function = LED_FUNCTION_STATUS;
     29			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
     30			default-state = "off";
     31		};
     32
     33		led-green {
     34			color = <LED_COLOR_ID_GREEN>;
     35			function = LED_FUNCTION_STATUS;
     36			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
     37			default-state = "on";
     38		};
     39
     40		led-red {
     41			color = <LED_COLOR_ID_RED>;
     42			function = LED_FUNCTION_STATUS;
     43			gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
     44			default-state = "off";
     45		};
     46	};
     47};
     48
     49&ethmac {
     50	status = "okay";
     51	phy-mode = "rmii";
     52	phy-handle = <&internal_phy>;
     53};
     54
     55&i2c_A {
     56	status = "okay";
     57	pinctrl-0 = <&i2c_a_pins>;
     58	pinctrl-names = "default";
     59};
     60
     61&internal_phy {
     62	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
     63	pinctrl-names = "default";
     64};
     65
     66&ir {
     67        linux,rc-map-name = "rc-khamsin";
     68};
     69
     70/* This is connected to the Bluetooth module: */
     71&uart_A {
     72	status = "okay";
     73	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
     74	pinctrl-names = "default";
     75	uart-has-rtscts;
     76
     77	bluetooth {
     78		compatible = "qcom,qca9377-bt";
     79		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
     80		max-speed = <2000000>;
     81		clocks = <&wifi32k>;
     82		clock-names = "lpo";
     83	};
     84};