imx8mm-venice-gw73xx.dtsi (10255B)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright 2020 Gateworks Corporation 4 */ 5 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/leds/common.h> 8#include <dt-bindings/phy/phy-imx8-pcie.h> 9 10/ { 11 aliases { 12 ethernet1 = ð1; 13 usb0 = &usbotg1; 14 usb1 = &usbotg2; 15 }; 16 17 led-controller { 18 compatible = "gpio-leds"; 19 pinctrl-names = "default"; 20 pinctrl-0 = <&pinctrl_gpio_leds>; 21 22 led-0 { 23 function = LED_FUNCTION_STATUS; 24 color = <LED_COLOR_ID_GREEN>; 25 gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; 26 default-state = "on"; 27 linux,default-trigger = "heartbeat"; 28 }; 29 30 led-1 { 31 function = LED_FUNCTION_STATUS; 32 color = <LED_COLOR_ID_RED>; 33 gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; 34 default-state = "off"; 35 }; 36 }; 37 38 pcie0_refclk: pcie0-refclk { 39 compatible = "fixed-clock"; 40 #clock-cells = <0>; 41 clock-frequency = <100000000>; 42 }; 43 44 pps { 45 compatible = "pps-gpio"; 46 pinctrl-names = "default"; 47 pinctrl-0 = <&pinctrl_pps>; 48 gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; 49 status = "okay"; 50 }; 51 52 reg_1p8v: regulator-1p8v { 53 compatible = "regulator-fixed"; 54 regulator-name = "1P8V"; 55 regulator-min-microvolt = <1800000>; 56 regulator-max-microvolt = <1800000>; 57 regulator-always-on; 58 }; 59 60 reg_3p3v: regulator-3p3v { 61 compatible = "regulator-fixed"; 62 regulator-name = "3P3V"; 63 regulator-min-microvolt = <3300000>; 64 regulator-max-microvolt = <3300000>; 65 regulator-always-on; 66 }; 67 68 reg_usb_otg1_vbus: regulator-usb-otg1 { 69 pinctrl-names = "default"; 70 pinctrl-0 = <&pinctrl_reg_usb1_en>; 71 compatible = "regulator-fixed"; 72 regulator-name = "usb_otg1_vbus"; 73 gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; 74 enable-active-high; 75 regulator-min-microvolt = <5000000>; 76 regulator-max-microvolt = <5000000>; 77 }; 78 79 reg_usb_otg2_vbus: regulator-usb-otg2 { 80 pinctrl-names = "default"; 81 pinctrl-0 = <&pinctrl_reg_usb2_en>; 82 compatible = "regulator-fixed"; 83 regulator-name = "usb_otg2_vbus"; 84 gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; 85 enable-active-high; 86 regulator-min-microvolt = <5000000>; 87 regulator-max-microvolt = <5000000>; 88 }; 89 90 reg_wifi_en: regulator-wifi-en { 91 pinctrl-names = "default"; 92 pinctrl-0 = <&pinctrl_reg_wl>; 93 compatible = "regulator-fixed"; 94 regulator-name = "wl"; 95 gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; 96 startup-delay-us = <100>; 97 enable-active-high; 98 regulator-min-microvolt = <3300000>; 99 regulator-max-microvolt = <3300000>; 100 }; 101}; 102 103/* off-board header */ 104&ecspi2 { 105 pinctrl-names = "default"; 106 pinctrl-0 = <&pinctrl_spi2>; 107 cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; 108 status = "okay"; 109}; 110 111&gpio1 { 112 gpio-line-names = "rs485_term", "mipi_gpio4", "", "", 113 "", "", "pci_usb_sel", "dio0", 114 "", "dio1", "", "", "", "", "", "", 115 "", "", "", "", "", "", "", "", 116 "", "", "", "", "", "", "", ""; 117}; 118 119&gpio4 { 120 gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2", 121 "mipi_gpio1", "", "", "pci_wdis#", 122 "", "", "", "", "", "", "", "", 123 "", "", "", "", "", "", "", "", 124 "", "", "", "", "", "", "", ""; 125}; 126 127&i2c2 { 128 clock-frequency = <400000>; 129 pinctrl-names = "default"; 130 pinctrl-0 = <&pinctrl_i2c2>; 131 status = "okay"; 132 133 accelerometer@19 { 134 pinctrl-names = "default"; 135 pinctrl-0 = <&pinctrl_accel>; 136 compatible = "st,lis2de12"; 137 reg = <0x19>; 138 st,drdy-int-pin = <1>; 139 interrupt-parent = <&gpio4>; 140 interrupts = <5 IRQ_TYPE_LEVEL_LOW>; 141 interrupt-names = "INT1"; 142 }; 143}; 144 145/* off-board header */ 146&i2c3 { 147 clock-frequency = <400000>; 148 pinctrl-names = "default"; 149 pinctrl-0 = <&pinctrl_i2c3>; 150 status = "okay"; 151}; 152 153&pcie_phy { 154 fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; 155 fsl,clkreq-unsupported; 156 clocks = <&pcie0_refclk>; 157 clock-names = "ref"; 158 status = "okay"; 159}; 160 161&pcie0 { 162 pinctrl-names = "default"; 163 pinctrl-0 = <&pinctrl_pcie0>; 164 reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>; 165 clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>, 166 <&pcie0_refclk>; 167 clock-names = "pcie", "pcie_aux", "pcie_bus"; 168 assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>, 169 <&clk IMX8MM_CLK_PCIE1_CTRL>; 170 assigned-clock-rates = <10000000>, <250000000>; 171 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, 172 <&clk IMX8MM_SYS_PLL2_250M>; 173 status = "okay"; 174 175 pcie@0,0 { 176 reg = <0x0000 0 0 0 0>; 177 #address-cells = <1>; 178 #size-cells = <0>; 179 180 pcie@1,0 { 181 reg = <0x0000 0 0 0 0>; 182 #address-cells = <1>; 183 #size-cells = <0>; 184 185 pcie@2,4 { 186 reg = <0x2000 0 0 0 0>; 187 #address-cells = <1>; 188 #size-cells = <0>; 189 190 eth1: pcie@6,0 { 191 reg = <0x0000 0 0 0 0>; 192 #address-cells = <1>; 193 #size-cells = <0>; 194 195 local-mac-address = [00 00 00 00 00 00]; 196 }; 197 }; 198 }; 199 }; 200}; 201 202/* off-board header */ 203&sai3 { 204 pinctrl-names = "default"; 205 pinctrl-0 = <&pinctrl_sai3>; 206 assigned-clocks = <&clk IMX8MM_CLK_SAI3>; 207 assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; 208 assigned-clock-rates = <24576000>; 209 status = "okay"; 210}; 211 212/* GPS */ 213&uart1 { 214 pinctrl-names = "default"; 215 pinctrl-0 = <&pinctrl_uart1>; 216 status = "okay"; 217}; 218 219/* bluetooth HCI */ 220&uart3 { 221 pinctrl-names = "default"; 222 pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>; 223 cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; 224 rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; 225 uart-has-rtscts; 226 status = "okay"; 227 228 bluetooth { 229 compatible = "brcm,bcm4330-bt"; 230 shutdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; 231 }; 232}; 233 234/* RS232 */ 235&uart4 { 236 pinctrl-names = "default"; 237 pinctrl-0 = <&pinctrl_uart4>; 238 status = "okay"; 239}; 240 241&usbotg1 { 242 dr_mode = "otg"; 243 over-current-active-low; 244 vbus-supply = <®_usb_otg1_vbus>; 245 status = "okay"; 246}; 247 248&usbotg2 { 249 dr_mode = "host"; 250 disable-over-current; 251 vbus-supply = <®_usb_otg2_vbus>; 252 status = "okay"; 253}; 254 255/* SDIO WiFi */ 256&usdhc1 { 257 pinctrl-names = "default"; 258 pinctrl-0 = <&pinctrl_usdhc1>; 259 bus-width = <4>; 260 non-removable; 261 vmmc-supply = <®_wifi_en>; 262 status = "okay"; 263}; 264 265/* microSD */ 266&usdhc2 { 267 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 268 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; 269 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; 270 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; 271 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; 272 bus-width = <4>; 273 vmmc-supply = <®_3p3v>; 274 status = "okay"; 275}; 276 277&iomuxc { 278 pinctrl-names = "default"; 279 pinctrl-0 = <&pinctrl_hog>; 280 281 pinctrl_hog: hoggrp { 282 fsl,pins = < 283 MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3 0x40000041 /* PLUG_TEST */ 284 MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x40000041 /* PCI_USBSEL */ 285 MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000041 /* PCIE_WDIS# */ 286 MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x40000041 /* DIO0 */ 287 MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000041 /* DIO1 */ 288 MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x40000104 /* RS485_TERM */ 289 MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x40000104 /* RS485 */ 290 MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x40000104 /* RS485_HALF */ 291 >; 292 }; 293 294 pinctrl_accel: accelgrp { 295 fsl,pins = < 296 MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x159 297 >; 298 }; 299 300 pinctrl_bten: btengrp { 301 fsl,pins = < 302 MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 303 >; 304 }; 305 306 pinctrl_gpio_leds: gpioledgrp { 307 fsl,pins = < 308 MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x19 309 MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x19 310 >; 311 }; 312 313 pinctrl_i2c3: i2c3grp { 314 fsl,pins = < 315 MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 316 MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 317 >; 318 }; 319 320 pinctrl_pcie0: pcie0grp { 321 fsl,pins = < 322 MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x41 323 >; 324 }; 325 326 pinctrl_pps: ppsgrp { 327 fsl,pins = < 328 MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 329 >; 330 }; 331 332 pinctrl_reg_wl: regwlgrp { 333 fsl,pins = < 334 MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x41 335 >; 336 }; 337 338 pinctrl_reg_usb1_en: regusb1grp { 339 fsl,pins = < 340 MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x41 341 MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x41 342 >; 343 }; 344 345 pinctrl_reg_usb2_en: regusb2grp { 346 fsl,pins = < 347 MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x41 348 >; 349 }; 350 351 pinctrl_sai3: sai3grp { 352 fsl,pins = < 353 MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 354 MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 355 MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 356 MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 357 MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6 358 >; 359 }; 360 361 pinctrl_spi2: spi2grp { 362 fsl,pins = < 363 MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0xd6 364 MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 365 MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6 366 MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 367 >; 368 }; 369 370 pinctrl_uart1: uart1grp { 371 fsl,pins = < 372 MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 373 MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 374 >; 375 }; 376 377 pinctrl_uart3: uart3grp { 378 fsl,pins = < 379 MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 380 MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 381 MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x140 382 MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x140 383 >; 384 }; 385 386 pinctrl_uart4: uart4grp { 387 fsl,pins = < 388 MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140 389 MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 390 >; 391 }; 392 393 pinctrl_usdhc1: usdhc1grp { 394 fsl,pins = < 395 MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 396 MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 397 MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 398 MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 399 MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 400 MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 401 >; 402 }; 403 404 pinctrl_usdhc2: usdhc2grp { 405 fsl,pins = < 406 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 407 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 408 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 409 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 410 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 411 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 412 >; 413 }; 414 415 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { 416 fsl,pins = < 417 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 418 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 419 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 420 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 421 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 422 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 423 >; 424 }; 425 426 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { 427 fsl,pins = < 428 MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 429 MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 430 MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 431 MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 432 MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 433 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 434 >; 435 }; 436 437 pinctrl_usdhc2_gpio: usdhc2gpiogrp { 438 fsl,pins = < 439 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 440 MX8MM_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x1d0 441 MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 442 >; 443 }; 444};