imx8mp-evk.dts (14577B)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright 2019 NXP 4 */ 5 6/dts-v1/; 7 8#include "imx8mp.dtsi" 9 10/ { 11 model = "NXP i.MX8MPlus EVK board"; 12 compatible = "fsl,imx8mp-evk", "fsl,imx8mp"; 13 14 chosen { 15 stdout-path = &uart2; 16 }; 17 18 gpio-leds { 19 compatible = "gpio-leds"; 20 pinctrl-names = "default"; 21 pinctrl-0 = <&pinctrl_gpio_led>; 22 23 status { 24 label = "yellow:status"; 25 gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; 26 default-state = "on"; 27 }; 28 }; 29 30 memory@40000000 { 31 device_type = "memory"; 32 reg = <0x0 0x40000000 0 0xc0000000>, 33 <0x1 0x00000000 0 0xc0000000>; 34 }; 35 36 reg_can1_stby: regulator-can1-stby { 37 compatible = "regulator-fixed"; 38 regulator-name = "can1-stby"; 39 pinctrl-names = "default"; 40 pinctrl-0 = <&pinctrl_flexcan1_reg>; 41 regulator-min-microvolt = <3300000>; 42 regulator-max-microvolt = <3300000>; 43 gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>; 44 enable-active-high; 45 }; 46 47 reg_can2_stby: regulator-can2-stby { 48 compatible = "regulator-fixed"; 49 regulator-name = "can2-stby"; 50 pinctrl-names = "default"; 51 pinctrl-0 = <&pinctrl_flexcan2_reg>; 52 regulator-min-microvolt = <3300000>; 53 regulator-max-microvolt = <3300000>; 54 gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; 55 enable-active-high; 56 }; 57 58 reg_usdhc2_vmmc: regulator-usdhc2 { 59 compatible = "regulator-fixed"; 60 pinctrl-names = "default"; 61 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; 62 regulator-name = "VSD_3V3"; 63 regulator-min-microvolt = <3300000>; 64 regulator-max-microvolt = <3300000>; 65 gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; 66 enable-active-high; 67 }; 68}; 69 70&flexcan1 { 71 pinctrl-names = "default"; 72 pinctrl-0 = <&pinctrl_flexcan1>; 73 xceiver-supply = <®_can1_stby>; 74 status = "okay"; 75}; 76 77&flexcan2 { 78 pinctrl-names = "default"; 79 pinctrl-0 = <&pinctrl_flexcan2>; 80 xceiver-supply = <®_can2_stby>; 81 status = "disabled";/* can2 pin conflict with pdm */ 82}; 83 84&eqos { 85 pinctrl-names = "default"; 86 pinctrl-0 = <&pinctrl_eqos>; 87 phy-mode = "rgmii-id"; 88 phy-handle = <ðphy0>; 89 snps,force_thresh_dma_mode; 90 snps,mtl-tx-config = <&mtl_tx_setup>; 91 snps,mtl-rx-config = <&mtl_rx_setup>; 92 status = "okay"; 93 94 mdio { 95 compatible = "snps,dwmac-mdio"; 96 #address-cells = <1>; 97 #size-cells = <0>; 98 99 ethphy0: ethernet-phy@1 { 100 compatible = "ethernet-phy-ieee802.3-c22"; 101 reg = <1>; 102 eee-broken-1000t; 103 reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; 104 reset-assert-us = <10000>; 105 reset-deassert-us = <80000>; 106 realtek,clkout-disable; 107 }; 108 }; 109 110 mtl_tx_setup: tx-queues-config { 111 snps,tx-queues-to-use = <5>; 112 snps,tx-sched-sp; 113 114 queue0 { 115 snps,dcb-algorithm; 116 snps,priority = <0x1>; 117 }; 118 119 queue1 { 120 snps,dcb-algorithm; 121 snps,priority = <0x2>; 122 }; 123 124 queue2 { 125 snps,dcb-algorithm; 126 snps,priority = <0x4>; 127 }; 128 129 queue3 { 130 snps,dcb-algorithm; 131 snps,priority = <0x8>; 132 }; 133 134 queue4 { 135 snps,dcb-algorithm; 136 snps,priority = <0xf0>; 137 }; 138 }; 139 140 mtl_rx_setup: rx-queues-config { 141 snps,rx-queues-to-use = <5>; 142 snps,rx-sched-sp; 143 144 queue0 { 145 snps,dcb-algorithm; 146 snps,priority = <0x1>; 147 snps,map-to-dma-channel = <0>; 148 }; 149 150 queue1 { 151 snps,dcb-algorithm; 152 snps,priority = <0x2>; 153 snps,map-to-dma-channel = <1>; 154 }; 155 156 queue2 { 157 snps,dcb-algorithm; 158 snps,priority = <0x4>; 159 snps,map-to-dma-channel = <2>; 160 }; 161 162 queue3 { 163 snps,dcb-algorithm; 164 snps,priority = <0x8>; 165 snps,map-to-dma-channel = <3>; 166 }; 167 168 queue4 { 169 snps,dcb-algorithm; 170 snps,priority = <0xf0>; 171 snps,map-to-dma-channel = <4>; 172 }; 173 }; 174}; 175 176&fec { 177 pinctrl-names = "default"; 178 pinctrl-0 = <&pinctrl_fec>; 179 phy-mode = "rgmii-id"; 180 phy-handle = <ðphy1>; 181 fsl,magic-packet; 182 status = "okay"; 183 184 mdio { 185 #address-cells = <1>; 186 #size-cells = <0>; 187 188 ethphy1: ethernet-phy@1 { 189 compatible = "ethernet-phy-ieee802.3-c22"; 190 reg = <1>; 191 eee-broken-1000t; 192 reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; 193 reset-assert-us = <10000>; 194 reset-deassert-us = <80000>; 195 realtek,clkout-disable; 196 }; 197 }; 198}; 199 200&i2c1 { 201 clock-frequency = <400000>; 202 pinctrl-names = "default"; 203 pinctrl-0 = <&pinctrl_i2c1>; 204 status = "okay"; 205 206 pmic@25 { 207 compatible = "nxp,pca9450c"; 208 reg = <0x25>; 209 pinctrl-names = "default"; 210 pinctrl-0 = <&pinctrl_pmic>; 211 interrupt-parent = <&gpio1>; 212 interrupts = <3 IRQ_TYPE_LEVEL_LOW>; 213 214 regulators { 215 BUCK1 { 216 regulator-name = "BUCK1"; 217 regulator-min-microvolt = <720000>; 218 regulator-max-microvolt = <1000000>; 219 regulator-boot-on; 220 regulator-always-on; 221 regulator-ramp-delay = <3125>; 222 }; 223 224 BUCK2 { 225 regulator-name = "BUCK2"; 226 regulator-min-microvolt = <720000>; 227 regulator-max-microvolt = <1025000>; 228 regulator-boot-on; 229 regulator-always-on; 230 regulator-ramp-delay = <3125>; 231 nxp,dvs-run-voltage = <950000>; 232 nxp,dvs-standby-voltage = <850000>; 233 }; 234 235 BUCK4 { 236 regulator-name = "BUCK4"; 237 regulator-min-microvolt = <3000000>; 238 regulator-max-microvolt = <3600000>; 239 regulator-boot-on; 240 regulator-always-on; 241 }; 242 243 BUCK5 { 244 regulator-name = "BUCK5"; 245 regulator-min-microvolt = <1650000>; 246 regulator-max-microvolt = <1950000>; 247 regulator-boot-on; 248 regulator-always-on; 249 }; 250 251 BUCK6 { 252 regulator-name = "BUCK6"; 253 regulator-min-microvolt = <1045000>; 254 regulator-max-microvolt = <1155000>; 255 regulator-boot-on; 256 regulator-always-on; 257 }; 258 259 LDO1 { 260 regulator-name = "LDO1"; 261 regulator-min-microvolt = <1650000>; 262 regulator-max-microvolt = <1950000>; 263 regulator-boot-on; 264 regulator-always-on; 265 }; 266 267 LDO3 { 268 regulator-name = "LDO3"; 269 regulator-min-microvolt = <1710000>; 270 regulator-max-microvolt = <1890000>; 271 regulator-boot-on; 272 regulator-always-on; 273 }; 274 275 LDO5 { 276 regulator-name = "LDO5"; 277 regulator-min-microvolt = <1800000>; 278 regulator-max-microvolt = <3300000>; 279 regulator-boot-on; 280 regulator-always-on; 281 }; 282 }; 283 }; 284}; 285 286&i2c3 { 287 clock-frequency = <400000>; 288 pinctrl-names = "default"; 289 pinctrl-0 = <&pinctrl_i2c3>; 290 status = "okay"; 291 292 pca6416: gpio@20 { 293 compatible = "ti,tca6416"; 294 reg = <0x20>; 295 gpio-controller; 296 #gpio-cells = <2>; 297 interrupt-controller; 298 #interrupt-cells = <2>; 299 pinctrl-names = "default"; 300 pinctrl-0 = <&pinctrl_pca6416_int>; 301 interrupt-parent = <&gpio1>; 302 interrupts = <12 IRQ_TYPE_LEVEL_LOW>; 303 gpio-line-names = "EXT_PWREN1", 304 "EXT_PWREN2", 305 "CAN1/I2C5_SEL", 306 "PDM/CAN2_SEL", 307 "FAN_EN", 308 "PWR_MEAS_IO1", 309 "PWR_MEAS_IO2", 310 "EXP_P0_7", 311 "EXP_P1_0", 312 "EXP_P1_1", 313 "EXP_P1_2", 314 "EXP_P1_3", 315 "EXP_P1_4", 316 "EXP_P1_5", 317 "EXP_P1_6", 318 "EXP_P1_7"; 319 }; 320}; 321 322/* I2C on expansion connector J22. */ 323&i2c5 { 324 clock-frequency = <100000>; /* Lower clock speed for external bus. */ 325 pinctrl-names = "default"; 326 pinctrl-0 = <&pinctrl_i2c5>; 327 status = "disabled"; /* can1 pins conflict with i2c5 */ 328 329 /* GPIO 2 of PCA6416 is used to switch between CAN1 and I2C5 functions: 330 * LOW: CAN1 (default, pull-down) 331 * HIGH: I2C5 332 * You need to set it to high to enable I2C5 (for example, add gpio-hog 333 * in pca6416 node). 334 */ 335}; 336 337&snvs_pwrkey { 338 status = "okay"; 339}; 340 341&uart2 { 342 /* console */ 343 pinctrl-names = "default"; 344 pinctrl-0 = <&pinctrl_uart2>; 345 status = "okay"; 346}; 347 348&usb3_phy1 { 349 status = "okay"; 350}; 351 352&usb3_1 { 353 status = "okay"; 354}; 355 356&usb_dwc3_1 { 357 pinctrl-names = "default"; 358 pinctrl-0 = <&pinctrl_usb1_vbus>; 359 dr_mode = "host"; 360 status = "okay"; 361}; 362 363&usdhc2 { 364 assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; 365 assigned-clock-rates = <400000000>; 366 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 367 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; 368 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; 369 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; 370 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; 371 vmmc-supply = <®_usdhc2_vmmc>; 372 bus-width = <4>; 373 status = "okay"; 374}; 375 376&usdhc3 { 377 assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; 378 assigned-clock-rates = <400000000>; 379 pinctrl-names = "default", "state_100mhz", "state_200mhz"; 380 pinctrl-0 = <&pinctrl_usdhc3>; 381 pinctrl-1 = <&pinctrl_usdhc3_100mhz>; 382 pinctrl-2 = <&pinctrl_usdhc3_200mhz>; 383 bus-width = <8>; 384 non-removable; 385 status = "okay"; 386}; 387 388&wdog1 { 389 pinctrl-names = "default"; 390 pinctrl-0 = <&pinctrl_wdog>; 391 fsl,ext-reset-output; 392 status = "okay"; 393}; 394 395&iomuxc { 396 pinctrl_eqos: eqosgrp { 397 fsl,pins = < 398 MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x2 399 MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x2 400 MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90 401 MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90 402 MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90 403 MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90 404 MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90 405 MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90 406 MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x16 407 MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16 408 MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16 409 MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16 410 MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16 411 MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16 412 MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x10 413 >; 414 }; 415 416 pinctrl_fec: fecgrp { 417 fsl,pins = < 418 MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x2 419 MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x2 420 MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90 421 MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90 422 MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90 423 MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90 424 MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90 425 MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90 426 MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x16 427 MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x16 428 MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x16 429 MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x16 430 MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x16 431 MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x16 432 MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x10 433 >; 434 }; 435 436 pinctrl_flexcan1: flexcan1grp { 437 fsl,pins = < 438 MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 439 MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 440 >; 441 }; 442 443 pinctrl_flexcan2: flexcan2grp { 444 fsl,pins = < 445 MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154 446 MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154 447 >; 448 }; 449 450 pinctrl_flexcan1_reg: flexcan1reggrp { 451 fsl,pins = < 452 MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x154 /* CAN1_STBY */ 453 >; 454 }; 455 456 pinctrl_flexcan2_reg: flexcan2reggrp { 457 fsl,pins = < 458 MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x154 /* CAN2_STBY */ 459 >; 460 }; 461 462 pinctrl_gpio_led: gpioledgrp { 463 fsl,pins = < 464 MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x140 465 >; 466 }; 467 468 pinctrl_i2c1: i2c1grp { 469 fsl,pins = < 470 MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 471 MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 472 >; 473 }; 474 475 pinctrl_i2c3: i2c3grp { 476 fsl,pins = < 477 MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 478 MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 479 >; 480 }; 481 482 pinctrl_i2c5: i2c5grp { 483 fsl,pins = < 484 MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA 0x400001c2 485 MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL 0x400001c2 486 >; 487 }; 488 489 pinctrl_pmic: pmicgrp { 490 fsl,pins = < 491 MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x000001c0 492 >; 493 }; 494 495 pinctrl_pca6416_int: pca6416_int_grp { 496 fsl,pins = < 497 MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x146 /* Input pull-up. */ 498 >; 499 }; 500 501 pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { 502 fsl,pins = < 503 MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40 504 >; 505 }; 506 507 pinctrl_uart2: uart2grp { 508 fsl,pins = < 509 MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 510 MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 511 >; 512 }; 513 514 pinctrl_usb1_vbus: usb1grp { 515 fsl,pins = < 516 MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x10 517 >; 518 }; 519 520 pinctrl_usdhc2: usdhc2grp { 521 fsl,pins = < 522 MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 523 MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 524 MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 525 MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 526 MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 527 MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 528 MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 529 >; 530 }; 531 532 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { 533 fsl,pins = < 534 MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 535 MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 536 MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 537 MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 538 MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 539 MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 540 MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 541 >; 542 }; 543 544 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { 545 fsl,pins = < 546 MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 547 MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 548 MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 549 MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 550 MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 551 MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 552 MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0 553 >; 554 }; 555 556 pinctrl_usdhc2_gpio: usdhc2gpiogrp { 557 fsl,pins = < 558 MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 559 >; 560 }; 561 562 pinctrl_usdhc3: usdhc3grp { 563 fsl,pins = < 564 MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 565 MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 566 MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 567 MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 568 MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 569 MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 570 MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 571 MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 572 MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 573 MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 574 MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 575 >; 576 }; 577 578 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { 579 fsl,pins = < 580 MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 581 MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 582 MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 583 MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 584 MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 585 MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 586 MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 587 MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 588 MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 589 MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 590 MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 591 >; 592 }; 593 594 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { 595 fsl,pins = < 596 MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 597 MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 598 MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 599 MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 600 MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 601 MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 602 MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 603 MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 604 MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 605 MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 606 MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 607 >; 608 }; 609 610 pinctrl_wdog: wdoggrp { 611 fsl,pins = < 612 MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x166 613 >; 614 }; 615};