lg1313.dtsi (8738B)
1// SPDX-License-Identifier: GPL-2.0 2/* 3 * dts file for lg1313 SoC 4 * 5 * Copyright (C) 2016, LG Electronics 6 */ 7 8#include <dt-bindings/gpio/gpio.h> 9#include <dt-bindings/interrupt-controller/arm-gic.h> 10 11/ { 12 #address-cells = <2>; 13 #size-cells = <2>; 14 15 compatible = "lge,lg1313"; 16 interrupt-parent = <&gic>; 17 18 cpus { 19 #address-cells = <2>; 20 #size-cells = <0>; 21 22 cpu0: cpu@0 { 23 device_type = "cpu"; 24 compatible = "arm,cortex-a53"; 25 reg = <0x0 0x0>; 26 next-level-cache = <&L2_0>; 27 }; 28 cpu1: cpu@1 { 29 device_type = "cpu"; 30 compatible = "arm,cortex-a53"; 31 reg = <0x0 0x1>; 32 enable-method = "psci"; 33 next-level-cache = <&L2_0>; 34 }; 35 cpu2: cpu@2 { 36 device_type = "cpu"; 37 compatible = "arm,cortex-a53"; 38 reg = <0x0 0x2>; 39 enable-method = "psci"; 40 next-level-cache = <&L2_0>; 41 }; 42 cpu3: cpu@3 { 43 device_type = "cpu"; 44 compatible = "arm,cortex-a53"; 45 reg = <0x0 0x3>; 46 enable-method = "psci"; 47 next-level-cache = <&L2_0>; 48 }; 49 L2_0: l2-cache0 { 50 compatible = "cache"; 51 }; 52 }; 53 54 psci { 55 compatible = "arm,psci-0.2", "arm,psci"; 56 method = "smc"; 57 cpu_suspend = <0x84000001>; 58 cpu_off = <0x84000002>; 59 cpu_on = <0x84000003>; 60 }; 61 62 gic: interrupt-controller@c0001000 { 63 #interrupt-cells = <3>; 64 compatible = "arm,gic-400"; 65 interrupt-controller; 66 reg = <0x0 0xc0001000 0x1000>, 67 <0x0 0xc0002000 0x2000>, 68 <0x0 0xc0004000 0x2000>, 69 <0x0 0xc0006000 0x2000>; 70 }; 71 72 pmu { 73 compatible = "arm,cortex-a53-pmu"; 74 interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, 75 <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, 76 <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, 77 <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; 78 interrupt-affinity = <&cpu0>, 79 <&cpu1>, 80 <&cpu2>, 81 <&cpu3>; 82 }; 83 84 timer { 85 compatible = "arm,armv8-timer"; 86 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) | 87 IRQ_TYPE_LEVEL_LOW)>, 88 <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) | 89 IRQ_TYPE_LEVEL_LOW)>, 90 <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) | 91 IRQ_TYPE_LEVEL_LOW)>, 92 <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) | 93 IRQ_TYPE_LEVEL_LOW)>; 94 }; 95 96 clk_bus: clk_bus { 97 #clock-cells = <0>; 98 99 compatible = "fixed-clock"; 100 clock-frequency = <198000000>; 101 clock-output-names = "BUSCLK"; 102 }; 103 104 soc { 105 #address-cells = <2>; 106 #size-cells = <1>; 107 108 compatible = "simple-bus"; 109 interrupt-parent = <&gic>; 110 ranges; 111 112 eth0: ethernet@c3700000 { 113 compatible = "cdns,gem"; 114 reg = <0x0 0xc3700000 0x1000>; 115 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; 116 clocks = <&clk_bus>, <&clk_bus>; 117 clock-names = "hclk", "pclk"; 118 phy-mode = "rmii"; 119 /* Filled in by boot */ 120 mac-address = [ 00 00 00 00 00 00 ]; 121 }; 122 }; 123 124 amba { 125 #address-cells = <2>; 126 #size-cells = <1>; 127 #interrupt-cells = <3>; 128 129 compatible = "simple-bus"; 130 interrupt-parent = <&gic>; 131 ranges; 132 133 timers: timer@fd100000 { 134 compatible = "arm,sp804", "arm,primecell"; 135 reg = <0x0 0xfd100000 0x1000>; 136 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; 137 clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>; 138 clock-names = "timer0clk", "timer1clk", "apb_pclk"; 139 }; 140 wdog: watchdog@fd200000 { 141 compatible = "arm,sp805", "arm,primecell"; 142 reg = <0x0 0xfd200000 0x1000>; 143 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 144 clocks = <&clk_bus>, <&clk_bus>; 145 clock-names = "wdog_clk", "apb_pclk"; 146 }; 147 uart0: serial@fe000000 { 148 compatible = "arm,pl011", "arm,primecell"; 149 reg = <0x0 0xfe000000 0x1000>; 150 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; 151 clocks = <&clk_bus>; 152 clock-names = "apb_pclk"; 153 status="disabled"; 154 }; 155 uart1: serial@fe100000 { 156 compatible = "arm,pl011", "arm,primecell"; 157 reg = <0x0 0xfe100000 0x1000>; 158 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; 159 clocks = <&clk_bus>; 160 clock-names = "apb_pclk"; 161 status="disabled"; 162 }; 163 uart2: serial@fe200000 { 164 compatible = "arm,pl011", "arm,primecell"; 165 reg = <0x0 0xfe200000 0x1000>; 166 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; 167 clocks = <&clk_bus>; 168 clock-names = "apb_pclk"; 169 status="disabled"; 170 }; 171 spi0: spi@fe800000 { 172 compatible = "arm,pl022", "arm,primecell"; 173 reg = <0x0 0xfe800000 0x1000>; 174 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; 175 clocks = <&clk_bus>; 176 clock-names = "apb_pclk"; 177 }; 178 spi1: spi@fe900000 { 179 compatible = "arm,pl022", "arm,primecell"; 180 reg = <0x0 0xfe900000 0x1000>; 181 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; 182 clocks = <&clk_bus>; 183 clock-names = "apb_pclk"; 184 }; 185 dmac0: dma-controller@c1128000 { 186 compatible = "arm,pl330", "arm,primecell"; 187 reg = <0x0 0xc1128000 0x1000>; 188 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; 189 clocks = <&clk_bus>; 190 clock-names = "apb_pclk"; 191 #dma-cells = <1>; 192 }; 193 gpio0: gpio@fd400000 { 194 #gpio-cells = <2>; 195 compatible = "arm,pl061", "arm,primecell"; 196 gpio-controller; 197 reg = <0x0 0xfd400000 0x1000>; 198 clocks = <&clk_bus>; 199 clock-names = "apb_pclk"; 200 status="disabled"; 201 }; 202 gpio1: gpio@fd410000 { 203 #gpio-cells = <2>; 204 compatible = "arm,pl061", "arm,primecell"; 205 gpio-controller; 206 reg = <0x0 0xfd410000 0x1000>; 207 clocks = <&clk_bus>; 208 clock-names = "apb_pclk"; 209 status="disabled"; 210 }; 211 gpio2: gpio@fd420000 { 212 #gpio-cells = <2>; 213 compatible = "arm,pl061", "arm,primecell"; 214 gpio-controller; 215 reg = <0x0 0xfd420000 0x1000>; 216 clocks = <&clk_bus>; 217 clock-names = "apb_pclk"; 218 status="disabled"; 219 }; 220 gpio3: gpio@fd430000 { 221 #gpio-cells = <2>; 222 compatible = "arm,pl061", "arm,primecell"; 223 gpio-controller; 224 reg = <0x0 0xfd430000 0x1000>; 225 clocks = <&clk_bus>; 226 clock-names = "apb_pclk"; 227 }; 228 gpio4: gpio@fd440000 { 229 #gpio-cells = <2>; 230 compatible = "arm,pl061", "arm,primecell"; 231 gpio-controller; 232 reg = <0x0 0xfd440000 0x1000>; 233 clocks = <&clk_bus>; 234 clock-names = "apb_pclk"; 235 status="disabled"; 236 }; 237 gpio5: gpio@fd450000 { 238 #gpio-cells = <2>; 239 compatible = "arm,pl061", "arm,primecell"; 240 gpio-controller; 241 reg = <0x0 0xfd450000 0x1000>; 242 clocks = <&clk_bus>; 243 clock-names = "apb_pclk"; 244 status="disabled"; 245 }; 246 gpio6: gpio@fd460000 { 247 #gpio-cells = <2>; 248 compatible = "arm,pl061", "arm,primecell"; 249 gpio-controller; 250 reg = <0x0 0xfd460000 0x1000>; 251 clocks = <&clk_bus>; 252 clock-names = "apb_pclk"; 253 status="disabled"; 254 }; 255 gpio7: gpio@fd470000 { 256 #gpio-cells = <2>; 257 compatible = "arm,pl061", "arm,primecell"; 258 gpio-controller; 259 reg = <0x0 0xfd470000 0x1000>; 260 clocks = <&clk_bus>; 261 clock-names = "apb_pclk"; 262 status="disabled"; 263 }; 264 gpio8: gpio@fd480000 { 265 #gpio-cells = <2>; 266 compatible = "arm,pl061", "arm,primecell"; 267 gpio-controller; 268 reg = <0x0 0xfd480000 0x1000>; 269 clocks = <&clk_bus>; 270 clock-names = "apb_pclk"; 271 status="disabled"; 272 }; 273 gpio9: gpio@fd490000 { 274 #gpio-cells = <2>; 275 compatible = "arm,pl061", "arm,primecell"; 276 gpio-controller; 277 reg = <0x0 0xfd490000 0x1000>; 278 clocks = <&clk_bus>; 279 clock-names = "apb_pclk"; 280 status="disabled"; 281 }; 282 gpio10: gpio@fd4a0000 { 283 #gpio-cells = <2>; 284 compatible = "arm,pl061", "arm,primecell"; 285 gpio-controller; 286 reg = <0x0 0xfd4a0000 0x1000>; 287 clocks = <&clk_bus>; 288 clock-names = "apb_pclk"; 289 status="disabled"; 290 }; 291 gpio11: gpio@fd4b0000 { 292 #gpio-cells = <2>; 293 compatible = "arm,pl061", "arm,primecell"; 294 gpio-controller; 295 reg = <0x0 0xfd4b0000 0x1000>; 296 clocks = <&clk_bus>; 297 clock-names = "apb_pclk"; 298 }; 299 gpio12: gpio@fd4c0000 { 300 #gpio-cells = <2>; 301 compatible = "arm,pl061", "arm,primecell"; 302 gpio-controller; 303 reg = <0x0 0xfd4c0000 0x1000>; 304 clocks = <&clk_bus>; 305 clock-names = "apb_pclk"; 306 status="disabled"; 307 }; 308 gpio13: gpio@fd4d0000 { 309 #gpio-cells = <2>; 310 compatible = "arm,pl061", "arm,primecell"; 311 gpio-controller; 312 reg = <0x0 0xfd4d0000 0x1000>; 313 clocks = <&clk_bus>; 314 clock-names = "apb_pclk"; 315 status="disabled"; 316 }; 317 gpio14: gpio@fd4e0000 { 318 #gpio-cells = <2>; 319 compatible = "arm,pl061", "arm,primecell"; 320 gpio-controller; 321 reg = <0x0 0xfd4e0000 0x1000>; 322 clocks = <&clk_bus>; 323 clock-names = "apb_pclk"; 324 status="disabled"; 325 }; 326 gpio15: gpio@fd4f0000 { 327 #gpio-cells = <2>; 328 compatible = "arm,pl061", "arm,primecell"; 329 gpio-controller; 330 reg = <0x0 0xfd4f0000 0x1000>; 331 clocks = <&clk_bus>; 332 clock-names = "apb_pclk"; 333 status="disabled"; 334 }; 335 gpio16: gpio@fd500000 { 336 #gpio-cells = <2>; 337 compatible = "arm,pl061", "arm,primecell"; 338 gpio-controller; 339 reg = <0x0 0xfd500000 0x1000>; 340 clocks = <&clk_bus>; 341 clock-names = "apb_pclk"; 342 status="disabled"; 343 }; 344 gpio17: gpio@fd510000 { 345 #gpio-cells = <2>; 346 compatible = "arm,pl061", "arm,primecell"; 347 gpio-controller; 348 reg = <0x0 0xfd510000 0x1000>; 349 clocks = <&clk_bus>; 350 clock-names = "apb_pclk"; 351 }; 352 }; 353};