cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

tegra194-p2888.dtsi (7977B)


      1// SPDX-License-Identifier: GPL-2.0
      2#include "tegra194.dtsi"
      3
      4#include <dt-bindings/mfd/max77620.h>
      5
      6/ {
      7	model = "NVIDIA Jetson AGX Xavier";
      8	compatible = "nvidia,p2888", "nvidia,tegra194";
      9
     10	aliases {
     11		ethernet0 = "/bus@0/ethernet@2490000";
     12		i2c0 = "/bpmp/i2c";
     13		i2c1 = "/bus@0/i2c@3160000";
     14		i2c2 = "/bus@0/i2c@c240000";
     15		i2c3 = "/bus@0/i2c@3180000";
     16		i2c4 = "/bus@0/i2c@3190000";
     17		i2c5 = "/bus@0/i2c@31c0000";
     18		i2c6 = "/bus@0/i2c@c250000";
     19		i2c7 = "/bus@0/i2c@31e0000";
     20		mmc0 = "/bus@0/mmc@3460000";
     21		mmc1 = "/bus@0/mmc@3400000";
     22		serial0 = &tcu;
     23	};
     24
     25	chosen {
     26		bootargs = "console=ttyS0,115200n8";
     27		stdout-path = "serial0:115200n8";
     28	};
     29
     30	bus@0 {
     31		ethernet@2490000 {
     32			status = "okay";
     33
     34			phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 5) GPIO_ACTIVE_LOW>;
     35			phy-handle = <&phy>;
     36			phy-mode = "rgmii-id";
     37
     38			mdio {
     39				#address-cells = <1>;
     40				#size-cells = <0>;
     41
     42				phy: ethernet-phy@0 {
     43					compatible = "ethernet-phy-ieee802.3-c22";
     44					reg = <0x0>;
     45					interrupt-parent = <&gpio>;
     46					interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
     47					#phy-cells = <0>;
     48				};
     49			};
     50		};
     51
     52		memory-controller@2c00000 {
     53			status = "okay";
     54		};
     55
     56		serial@3110000 {
     57			status = "okay";
     58		};
     59
     60		i2c@3160000 {
     61			status = "okay";
     62
     63			eeprom@50 {
     64				compatible = "atmel,24c02";
     65				reg = <0x50>;
     66
     67				label = "module";
     68				vcc-supply = <&vdd_1v8ls>;
     69				address-width = <8>;
     70				pagesize = <8>;
     71				size = <256>;
     72				read-only;
     73			};
     74		};
     75
     76		/* SDMMC1 (SD/MMC) */
     77		mmc@3400000 {
     78			cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>;
     79		};
     80
     81		/* SDMMC4 (eMMC) */
     82		mmc@3460000 {
     83			status = "okay";
     84			bus-width = <8>;
     85			non-removable;
     86
     87			vqmmc-supply = <&vdd_1v8ls>;
     88			vmmc-supply = <&vdd_emmc_3v3>;
     89		};
     90
     91		padctl@3520000 {
     92			avdd-usb-supply = <&vdd_usb_3v3>;
     93			vclamp-usb-supply = <&vdd_1v8ao>;
     94
     95			ports {
     96				usb2-0 {
     97					vbus-supply = <&vdd_5v0_sys>;
     98				};
     99
    100				usb2-1 {
    101					vbus-supply = <&vdd_5v0_sys>;
    102				};
    103
    104				usb2-3 {
    105					vbus-supply = <&vdd_5v_sata>;
    106				};
    107
    108				usb3-0 {
    109					vbus-supply = <&vdd_5v0_sys>;
    110				};
    111
    112				usb3-2 {
    113					vbus-supply = <&vdd_5v0_sys>;
    114				};
    115
    116				usb3-3 {
    117					vbus-supply = <&vdd_5v0_sys>;
    118				};
    119			};
    120		};
    121
    122		rtc@c2a0000 {
    123			status = "okay";
    124		};
    125
    126		pmc@c360000 {
    127			nvidia,invert-interrupt;
    128		};
    129	};
    130
    131	bpmp {
    132		i2c {
    133			status = "okay";
    134
    135			pmic: pmic@3c {
    136				compatible = "maxim,max20024";
    137				reg = <0x3c>;
    138
    139				interrupt-parent = <&pmc>;
    140				interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
    141				#interrupt-cells = <2>;
    142				interrupt-controller;
    143
    144				#gpio-cells = <2>;
    145				gpio-controller;
    146
    147				pinctrl-names = "default";
    148				pinctrl-0 = <&max20024_default>;
    149
    150				max20024_default: pinmux {
    151					gpio0 {
    152						pins = "gpio0";
    153						function = "gpio";
    154					};
    155
    156					gpio1 {
    157						pins = "gpio1";
    158						function = "fps-out";
    159						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
    160					};
    161
    162					gpio2 {
    163						pins = "gpio2";
    164						function = "fps-out";
    165						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
    166					};
    167
    168					gpio3 {
    169						pins = "gpio3";
    170						function = "fps-out";
    171						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
    172					};
    173
    174					gpio4 {
    175						pins = "gpio4";
    176						function = "32k-out1";
    177						drive-push-pull = <1>;
    178					};
    179
    180					gpio6 {
    181						pins = "gpio6";
    182						function = "gpio";
    183						drive-push-pull = <1>;
    184					};
    185
    186					gpio7 {
    187						pins = "gpio7";
    188						function = "gpio";
    189						drive-push-pull = <0>;
    190					};
    191				};
    192
    193				fps {
    194					fps0 {
    195						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
    196						maxim,shutdown-fps-time-period-us = <640>;
    197					};
    198
    199					fps1 {
    200						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
    201						maxim,shutdown-fps-time-period-us = <640>;
    202						maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
    203					};
    204
    205					fps2 {
    206						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
    207						maxim,shutdown-fps-time-period-us = <640>;
    208					};
    209				};
    210
    211				regulators {
    212					in-sd0-supply = <&vdd_5v0_sys>;
    213					in-sd1-supply = <&vdd_5v0_sys>;
    214					in-sd2-supply = <&vdd_5v0_sys>;
    215					in-sd3-supply = <&vdd_5v0_sys>;
    216					in-sd4-supply = <&vdd_5v0_sys>;
    217
    218					in-ldo0-1-supply = <&vdd_5v0_sys>;
    219					in-ldo2-supply = <&vdd_5v0_sys>;
    220					in-ldo3-5-supply = <&vdd_5v0_sys>;
    221					in-ldo4-6-supply = <&vdd_5v0_sys>;
    222					in-ldo7-8-supply = <&vdd_1v8ls>;
    223
    224					vdd_1v0: sd0 {
    225						regulator-name = "VDDIO_SYS_1V0";
    226						regulator-min-microvolt = <1000000>;
    227						regulator-max-microvolt = <1000000>;
    228						regulator-always-on;
    229						regulator-boot-on;
    230					};
    231
    232					vdd_1v8hs: sd1 {
    233						regulator-name = "VDDIO_SYS_1V8HS";
    234						regulator-min-microvolt = <1800000>;
    235						regulator-max-microvolt = <1800000>;
    236						regulator-always-on;
    237						regulator-boot-on;
    238					};
    239
    240					vdd_1v8ls: sd2 {
    241						regulator-name = "VDDIO_SYS_1V8LS";
    242						regulator-min-microvolt = <1800000>;
    243						regulator-max-microvolt = <1800000>;
    244						regulator-always-on;
    245						regulator-boot-on;
    246					};
    247
    248					vdd_1v8ao: sd3 {
    249						regulator-name = "VDDIO_AO_1V8";
    250						regulator-min-microvolt = <1800000>;
    251						regulator-max-microvolt = <1800000>;
    252						regulator-always-on;
    253						regulator-boot-on;
    254					};
    255
    256					sd4 {
    257						regulator-name = "VDD_DDR_1V1";
    258						regulator-min-microvolt = <1100000>;
    259						regulator-max-microvolt = <1100000>;
    260						regulator-always-on;
    261						regulator-boot-on;
    262					};
    263
    264					ldo0 {
    265						regulator-name = "VDD_RTC";
    266						regulator-min-microvolt = <800000>;
    267						regulator-max-microvolt = <800000>;
    268						regulator-always-on;
    269						regulator-boot-on;
    270					};
    271
    272					ldo2 {
    273						regulator-name = "VDDIO_AO_3V3";
    274						regulator-min-microvolt = <3300000>;
    275						regulator-max-microvolt = <3300000>;
    276						regulator-always-on;
    277						regulator-boot-on;
    278					};
    279
    280					vdd_emmc_3v3: ldo3 {
    281						regulator-name = "VDD_EMMC_3V3";
    282						regulator-min-microvolt = <3300000>;
    283						regulator-max-microvolt = <3300000>;
    284					};
    285
    286					vdd_usb_3v3: ldo5 {
    287						regulator-name = "VDD_USB_3V3";
    288						regulator-min-microvolt = <3300000>;
    289						regulator-max-microvolt = <3300000>;
    290					};
    291
    292					ldo6 {
    293						regulator-name = "VDD_SDIO_3V3";
    294						regulator-min-microvolt = <3300000>;
    295						regulator-max-microvolt = <3300000>;
    296					};
    297
    298					ldo7 {
    299						regulator-name = "AVDD_CSI_1V2";
    300						regulator-min-microvolt = <1200000>;
    301						regulator-max-microvolt = <1200000>;
    302					};
    303				};
    304			};
    305
    306			temperature-sensor@4c {
    307				compatible = "ti,tmp451";
    308				reg = <0x4c>;
    309
    310				interrupt-parent = <&gpio>;
    311				interrupts = <TEGRA194_MAIN_GPIO(H, 2)
    312					      IRQ_TYPE_EDGE_FALLING>;
    313				vcc-supply = <&vdd_1v8ls>;
    314
    315				#thermal-sensor-cells = <1>;
    316			};
    317		};
    318	};
    319
    320	vdd_5v0_sys: regulator-vdd-5v0-sys {
    321		compatible = "regulator-fixed";
    322		regulator-name = "VIN_SYS_5V0";
    323		regulator-min-microvolt = <5000000>;
    324		regulator-max-microvolt = <5000000>;
    325		regulator-always-on;
    326		regulator-boot-on;
    327	};
    328
    329	vdd_hdmi: regulator-vdd-hdmi {
    330		compatible = "regulator-fixed";
    331		regulator-name = "VDD_5V0_HDMI_CON";
    332		regulator-min-microvolt = <5000000>;
    333		regulator-max-microvolt = <5000000>;
    334		gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
    335		enable-active-high;
    336	};
    337
    338	vdd_3v3_pcie: regulator-vdd-3v3-pcie {
    339		compatible = "regulator-fixed";
    340		regulator-name = "PEX_3V3";
    341		regulator-min-microvolt = <3300000>;
    342		regulator-max-microvolt = <3300000>;
    343		gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
    344		regulator-boot-on;
    345		enable-active-high;
    346	};
    347
    348	vdd_12v_pcie: regulator-vdd-12v-pcie {
    349		compatible = "regulator-fixed";
    350		regulator-name = "VDD_12V";
    351		regulator-min-microvolt = <1200000>;
    352		regulator-max-microvolt = <1200000>;
    353		gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
    354		regulator-boot-on;
    355	};
    356
    357	vdd_5v_sata: regulator-vdd-5v0-sata {
    358		compatible = "regulator-fixed";
    359		regulator-name = "VDD_5V_SATA";
    360		regulator-min-microvolt = <5000000>;
    361		regulator-max-microvolt = <5000000>;
    362		gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
    363		enable-active-high;
    364	};
    365};