ipq8074.dtsi (21218B)
1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (c) 2017, The Linux Foundation. All rights reserved. 4 */ 5 6#include <dt-bindings/interrupt-controller/arm-gic.h> 7#include <dt-bindings/clock/qcom,gcc-ipq8074.h> 8 9/ { 10 model = "Qualcomm Technologies, Inc. IPQ8074"; 11 compatible = "qcom,ipq8074"; 12 13 clocks { 14 sleep_clk: sleep_clk { 15 compatible = "fixed-clock"; 16 clock-frequency = <32768>; 17 #clock-cells = <0>; 18 }; 19 20 xo: xo { 21 compatible = "fixed-clock"; 22 clock-frequency = <19200000>; 23 #clock-cells = <0>; 24 }; 25 }; 26 27 cpus { 28 #address-cells = <0x1>; 29 #size-cells = <0x0>; 30 31 CPU0: cpu@0 { 32 device_type = "cpu"; 33 compatible = "arm,cortex-a53"; 34 reg = <0x0>; 35 next-level-cache = <&L2_0>; 36 enable-method = "psci"; 37 }; 38 39 CPU1: cpu@1 { 40 device_type = "cpu"; 41 compatible = "arm,cortex-a53"; 42 enable-method = "psci"; 43 reg = <0x1>; 44 next-level-cache = <&L2_0>; 45 }; 46 47 CPU2: cpu@2 { 48 device_type = "cpu"; 49 compatible = "arm,cortex-a53"; 50 enable-method = "psci"; 51 reg = <0x2>; 52 next-level-cache = <&L2_0>; 53 }; 54 55 CPU3: cpu@3 { 56 device_type = "cpu"; 57 compatible = "arm,cortex-a53"; 58 enable-method = "psci"; 59 reg = <0x3>; 60 next-level-cache = <&L2_0>; 61 }; 62 63 L2_0: l2-cache { 64 compatible = "cache"; 65 cache-level = <0x2>; 66 }; 67 }; 68 69 pmu { 70 compatible = "arm,cortex-a53-pmu"; 71 interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 72 }; 73 74 psci { 75 compatible = "arm,psci-1.0"; 76 method = "smc"; 77 }; 78 79 reserved-memory { 80 #address-cells = <2>; 81 #size-cells = <2>; 82 ranges; 83 84 smem@4ab00000 { 85 compatible = "qcom,smem"; 86 reg = <0x0 0x4ab00000 0x0 0x00100000>; 87 no-map; 88 89 hwlocks = <&tcsr_mutex 0>; 90 }; 91 92 memory@4ac00000 { 93 no-map; 94 reg = <0x0 0x4ac00000 0x0 0x00400000>; 95 }; 96 }; 97 98 firmware { 99 scm { 100 compatible = "qcom,scm-ipq8074", "qcom,scm"; 101 }; 102 }; 103 104 soc: soc { 105 #address-cells = <0x1>; 106 #size-cells = <0x1>; 107 ranges = <0 0 0 0xffffffff>; 108 compatible = "simple-bus"; 109 110 ssphy_1: phy@58000 { 111 compatible = "qcom,ipq8074-qmp-usb3-phy"; 112 reg = <0x00058000 0x1c4>; 113 #address-cells = <1>; 114 #size-cells = <1>; 115 ranges; 116 117 clocks = <&gcc GCC_USB1_AUX_CLK>, 118 <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, 119 <&xo>; 120 clock-names = "aux", "cfg_ahb", "ref"; 121 122 resets = <&gcc GCC_USB1_PHY_BCR>, 123 <&gcc GCC_USB3PHY_1_PHY_BCR>; 124 reset-names = "phy","common"; 125 status = "disabled"; 126 127 usb1_ssphy: phy@58200 { 128 reg = <0x00058200 0x130>, /* Tx */ 129 <0x00058400 0x200>, /* Rx */ 130 <0x00058800 0x1f8>, /* PCS */ 131 <0x00058600 0x044>; /* PCS misc*/ 132 #phy-cells = <0>; 133 #clock-cells = <1>; 134 clocks = <&gcc GCC_USB1_PIPE_CLK>; 135 clock-names = "pipe0"; 136 clock-output-names = "gcc_usb1_pipe_clk_src"; 137 }; 138 }; 139 140 qusb_phy_1: phy@59000 { 141 compatible = "qcom,ipq8074-qusb2-phy"; 142 reg = <0x00059000 0x180>; 143 #phy-cells = <0>; 144 145 clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, 146 <&xo>; 147 clock-names = "cfg_ahb", "ref"; 148 149 resets = <&gcc GCC_QUSB2_1_PHY_BCR>; 150 status = "disabled"; 151 }; 152 153 ssphy_0: phy@78000 { 154 compatible = "qcom,ipq8074-qmp-usb3-phy"; 155 reg = <0x00078000 0x1c4>; 156 #address-cells = <1>; 157 #size-cells = <1>; 158 ranges; 159 160 clocks = <&gcc GCC_USB0_AUX_CLK>, 161 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, 162 <&xo>; 163 clock-names = "aux", "cfg_ahb", "ref"; 164 165 resets = <&gcc GCC_USB0_PHY_BCR>, 166 <&gcc GCC_USB3PHY_0_PHY_BCR>; 167 reset-names = "phy","common"; 168 status = "disabled"; 169 170 usb0_ssphy: phy@78200 { 171 reg = <0x00078200 0x130>, /* Tx */ 172 <0x00078400 0x200>, /* Rx */ 173 <0x00078800 0x1f8>, /* PCS */ 174 <0x00078600 0x044>; /* PCS misc*/ 175 #phy-cells = <0>; 176 #clock-cells = <1>; 177 clocks = <&gcc GCC_USB0_PIPE_CLK>; 178 clock-names = "pipe0"; 179 clock-output-names = "gcc_usb0_pipe_clk_src"; 180 }; 181 }; 182 183 qusb_phy_0: phy@79000 { 184 compatible = "qcom,ipq8074-qusb2-phy"; 185 reg = <0x00079000 0x180>; 186 #phy-cells = <0>; 187 188 clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, 189 <&xo>; 190 clock-names = "cfg_ahb", "ref"; 191 192 resets = <&gcc GCC_QUSB2_0_PHY_BCR>; 193 status = "disabled"; 194 }; 195 196 pcie_qmp0: phy@86000 { 197 compatible = "qcom,ipq8074-qmp-pcie-phy"; 198 reg = <0x00086000 0x1000>; 199 #address-cells = <1>; 200 #size-cells = <1>; 201 ranges; 202 203 clocks = <&gcc GCC_PCIE0_AUX_CLK>, 204 <&gcc GCC_PCIE0_AHB_CLK>; 205 clock-names = "aux", "cfg_ahb"; 206 resets = <&gcc GCC_PCIE0_PHY_BCR>, 207 <&gcc GCC_PCIE0PHY_PHY_BCR>; 208 reset-names = "phy", 209 "common"; 210 status = "disabled"; 211 212 pcie_phy0: phy@86200 { 213 reg = <0x86200 0x16c>, 214 <0x86400 0x200>, 215 <0x86800 0x4f4>; 216 #phy-cells = <0>; 217 #clock-cells = <0>; 218 clocks = <&gcc GCC_PCIE0_PIPE_CLK>; 219 clock-names = "pipe0"; 220 clock-output-names = "pcie_0_pipe_clk"; 221 }; 222 }; 223 224 pcie_qmp1: phy@8e000 { 225 compatible = "qcom,ipq8074-qmp-pcie-phy"; 226 reg = <0x0008e000 0x1000>; 227 #address-cells = <1>; 228 #size-cells = <1>; 229 ranges; 230 231 clocks = <&gcc GCC_PCIE1_AUX_CLK>, 232 <&gcc GCC_PCIE1_AHB_CLK>; 233 clock-names = "aux", "cfg_ahb"; 234 resets = <&gcc GCC_PCIE1_PHY_BCR>, 235 <&gcc GCC_PCIE1PHY_PHY_BCR>; 236 reset-names = "phy", 237 "common"; 238 status = "disabled"; 239 240 pcie_phy1: phy@8e200 { 241 reg = <0x8e200 0x16c>, 242 <0x8e400 0x200>, 243 <0x8e800 0x4f4>; 244 #phy-cells = <0>; 245 #clock-cells = <0>; 246 clocks = <&gcc GCC_PCIE1_PIPE_CLK>; 247 clock-names = "pipe0"; 248 clock-output-names = "pcie_1_pipe_clk"; 249 }; 250 }; 251 252 mdio: mdio@90000 { 253 compatible = "qcom,ipq4019-mdio"; 254 reg = <0x00090000 0x64>; 255 #address-cells = <1>; 256 #size-cells = <0>; 257 258 clocks = <&gcc GCC_MDIO_AHB_CLK>; 259 clock-names = "gcc_mdio_ahb_clk"; 260 261 status = "disabled"; 262 }; 263 264 prng: rng@e3000 { 265 compatible = "qcom,prng-ee"; 266 reg = <0x000e3000 0x1000>; 267 clocks = <&gcc GCC_PRNG_AHB_CLK>; 268 clock-names = "core"; 269 status = "disabled"; 270 }; 271 272 cryptobam: dma-controller@704000 { 273 compatible = "qcom,bam-v1.7.0"; 274 reg = <0x00704000 0x20000>; 275 interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; 276 clocks = <&gcc GCC_CRYPTO_AHB_CLK>; 277 clock-names = "bam_clk"; 278 #dma-cells = <1>; 279 qcom,ee = <1>; 280 qcom,controlled-remotely; 281 status = "disabled"; 282 }; 283 284 crypto: crypto@73a000 { 285 compatible = "qcom,crypto-v5.1"; 286 reg = <0x0073a000 0x6000>; 287 clocks = <&gcc GCC_CRYPTO_AHB_CLK>, 288 <&gcc GCC_CRYPTO_AXI_CLK>, 289 <&gcc GCC_CRYPTO_CLK>; 290 clock-names = "iface", "bus", "core"; 291 dmas = <&cryptobam 2>, <&cryptobam 3>; 292 dma-names = "rx", "tx"; 293 status = "disabled"; 294 }; 295 296 tlmm: pinctrl@1000000 { 297 compatible = "qcom,ipq8074-pinctrl"; 298 reg = <0x01000000 0x300000>; 299 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; 300 gpio-controller; 301 gpio-ranges = <&tlmm 0 0 70>; 302 #gpio-cells = <0x2>; 303 interrupt-controller; 304 #interrupt-cells = <0x2>; 305 306 serial_4_pins: serial4-pinmux { 307 pins = "gpio23", "gpio24"; 308 function = "blsp4_uart1"; 309 drive-strength = <8>; 310 bias-disable; 311 }; 312 313 i2c_0_pins: i2c-0-pinmux { 314 pins = "gpio42", "gpio43"; 315 function = "blsp1_i2c"; 316 drive-strength = <8>; 317 bias-disable; 318 }; 319 320 spi_0_pins: spi-0-pins { 321 pins = "gpio38", "gpio39", "gpio40", "gpio41"; 322 function = "blsp0_spi"; 323 drive-strength = <8>; 324 bias-disable; 325 }; 326 327 hsuart_pins: hsuart-pins { 328 pins = "gpio46", "gpio47", "gpio48", "gpio49"; 329 function = "blsp2_uart"; 330 drive-strength = <8>; 331 bias-disable; 332 }; 333 334 qpic_pins: qpic-pins { 335 pins = "gpio1", "gpio3", "gpio4", 336 "gpio5", "gpio6", "gpio7", 337 "gpio8", "gpio10", "gpio11", 338 "gpio12", "gpio13", "gpio14", 339 "gpio15", "gpio16", "gpio17"; 340 function = "qpic"; 341 drive-strength = <8>; 342 bias-disable; 343 }; 344 }; 345 346 gcc: gcc@1800000 { 347 compatible = "qcom,gcc-ipq8074"; 348 reg = <0x01800000 0x80000>; 349 #clock-cells = <0x1>; 350 #reset-cells = <0x1>; 351 }; 352 353 tcsr_mutex: hwlock@1905000 { 354 compatible = "qcom,tcsr-mutex"; 355 reg = <0x01905000 0x20000>; 356 #hwlock-cells = <1>; 357 }; 358 359 spmi_bus: spmi@200f000 { 360 compatible = "qcom,spmi-pmic-arb"; 361 reg = <0x0200f000 0x001000>, 362 <0x02400000 0x800000>, 363 <0x02c00000 0x800000>, 364 <0x03800000 0x200000>, 365 <0x0200a000 0x000700>; 366 reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; 367 interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; 368 interrupt-names = "periph_irq"; 369 qcom,ee = <0>; 370 qcom,channel = <0>; 371 #address-cells = <2>; 372 #size-cells = <0>; 373 interrupt-controller; 374 #interrupt-cells = <4>; 375 cell-index = <0>; 376 }; 377 378 sdhc_1: sdhci@7824900 { 379 compatible = "qcom,sdhci-msm-v4"; 380 reg = <0x7824900 0x500>, <0x7824000 0x800>; 381 reg-names = "hc_mem", "core_mem"; 382 383 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, 384 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; 385 interrupt-names = "hc_irq", "pwr_irq"; 386 387 clocks = <&xo>, 388 <&gcc GCC_SDCC1_AHB_CLK>, 389 <&gcc GCC_SDCC1_APPS_CLK>; 390 clock-names = "xo", "iface", "core"; 391 max-frequency = <384000000>; 392 mmc-ddr-1_8v; 393 mmc-hs200-1_8v; 394 mmc-hs400-1_8v; 395 bus-width = <8>; 396 397 status = "disabled"; 398 }; 399 400 blsp_dma: dma-controller@7884000 { 401 compatible = "qcom,bam-v1.7.0"; 402 reg = <0x07884000 0x2b000>; 403 interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; 404 clocks = <&gcc GCC_BLSP1_AHB_CLK>; 405 clock-names = "bam_clk"; 406 #dma-cells = <1>; 407 qcom,ee = <0>; 408 }; 409 410 blsp1_uart1: serial@78af000 { 411 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 412 reg = <0x078af000 0x200>; 413 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; 414 clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, 415 <&gcc GCC_BLSP1_AHB_CLK>; 416 clock-names = "core", "iface"; 417 status = "disabled"; 418 }; 419 420 blsp1_uart3: serial@78b1000 { 421 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 422 reg = <0x078b1000 0x200>; 423 interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; 424 clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, 425 <&gcc GCC_BLSP1_AHB_CLK>; 426 clock-names = "core", "iface"; 427 dmas = <&blsp_dma 4>, 428 <&blsp_dma 5>; 429 dma-names = "tx", "rx"; 430 pinctrl-0 = <&hsuart_pins>; 431 pinctrl-names = "default"; 432 status = "disabled"; 433 }; 434 435 blsp1_uart5: serial@78b3000 { 436 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; 437 reg = <0x078b3000 0x200>; 438 interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; 439 clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, 440 <&gcc GCC_BLSP1_AHB_CLK>; 441 clock-names = "core", "iface"; 442 pinctrl-0 = <&serial_4_pins>; 443 pinctrl-names = "default"; 444 status = "disabled"; 445 }; 446 447 blsp1_spi1: spi@78b5000 { 448 compatible = "qcom,spi-qup-v2.2.1"; 449 #address-cells = <1>; 450 #size-cells = <0>; 451 reg = <0x078b5000 0x600>; 452 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; 453 spi-max-frequency = <50000000>; 454 clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, 455 <&gcc GCC_BLSP1_AHB_CLK>; 456 clock-names = "core", "iface"; 457 dmas = <&blsp_dma 12>, <&blsp_dma 13>; 458 dma-names = "tx", "rx"; 459 pinctrl-0 = <&spi_0_pins>; 460 pinctrl-names = "default"; 461 status = "disabled"; 462 }; 463 464 blsp1_i2c2: i2c@78b6000 { 465 compatible = "qcom,i2c-qup-v2.2.1"; 466 #address-cells = <1>; 467 #size-cells = <0>; 468 reg = <0x078b6000 0x600>; 469 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; 470 clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, 471 <&gcc GCC_BLSP1_AHB_CLK>; 472 clock-names = "core", "iface"; 473 clock-frequency = <400000>; 474 dmas = <&blsp_dma 14>, <&blsp_dma 15>; 475 dma-names = "tx", "rx"; 476 pinctrl-0 = <&i2c_0_pins>; 477 pinctrl-names = "default"; 478 status = "disabled"; 479 }; 480 481 blsp1_i2c3: i2c@78b7000 { 482 compatible = "qcom,i2c-qup-v2.2.1"; 483 #address-cells = <1>; 484 #size-cells = <0>; 485 reg = <0x078b7000 0x600>; 486 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; 487 clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, 488 <&gcc GCC_BLSP1_AHB_CLK>; 489 clock-names = "core", "iface"; 490 clock-frequency = <100000>; 491 dmas = <&blsp_dma 16>, <&blsp_dma 17>; 492 dma-names = "tx", "rx"; 493 status = "disabled"; 494 }; 495 496 blsp1_i2c5: i2c@78b9000 { 497 compatible = "qcom,i2c-qup-v2.2.1"; 498 #address-cells = <1>; 499 #size-cells = <0>; 500 reg = <0x78b9000 0x600>; 501 interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; 502 clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, 503 <&gcc GCC_BLSP1_AHB_CLK>; 504 clock-names = "core", "iface"; 505 clock-frequency = <400000>; 506 dmas = <&blsp_dma 20>, <&blsp_dma 21>; 507 dma-names = "tx", "rx"; 508 status = "disabled"; 509 }; 510 511 blsp1_i2c6: i2c@78ba000 { 512 compatible = "qcom,i2c-qup-v2.2.1"; 513 #address-cells = <1>; 514 #size-cells = <0>; 515 reg = <0x078ba000 0x600>; 516 interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; 517 clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, 518 <&gcc GCC_BLSP1_AHB_CLK>; 519 clock-names = "core", "iface"; 520 clock-frequency = <100000>; 521 dmas = <&blsp_dma 22>, <&blsp_dma 23>; 522 dma-names = "tx", "rx"; 523 status = "disabled"; 524 }; 525 526 qpic_bam: dma-controller@7984000 { 527 compatible = "qcom,bam-v1.7.0"; 528 reg = <0x07984000 0x1a000>; 529 interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; 530 clocks = <&gcc GCC_QPIC_AHB_CLK>; 531 clock-names = "bam_clk"; 532 #dma-cells = <1>; 533 qcom,ee = <0>; 534 status = "disabled"; 535 }; 536 537 qpic_nand: nand@79b0000 { 538 compatible = "qcom,ipq8074-nand"; 539 reg = <0x079b0000 0x10000>; 540 #address-cells = <1>; 541 #size-cells = <0>; 542 clocks = <&gcc GCC_QPIC_CLK>, 543 <&gcc GCC_QPIC_AHB_CLK>; 544 clock-names = "core", "aon"; 545 546 dmas = <&qpic_bam 0>, 547 <&qpic_bam 1>, 548 <&qpic_bam 2>; 549 dma-names = "tx", "rx", "cmd"; 550 pinctrl-0 = <&qpic_pins>; 551 pinctrl-names = "default"; 552 status = "disabled"; 553 }; 554 555 usb_0: usb@8af8800 { 556 compatible = "qcom,ipq8074-dwc3", "qcom,dwc3"; 557 reg = <0x08af8800 0x400>; 558 #address-cells = <1>; 559 #size-cells = <1>; 560 ranges; 561 562 clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, 563 <&gcc GCC_USB0_MASTER_CLK>, 564 <&gcc GCC_USB0_SLEEP_CLK>, 565 <&gcc GCC_USB0_MOCK_UTMI_CLK>; 566 clock-names = "cfg_noc", 567 "core", 568 "sleep", 569 "mock_utmi"; 570 571 assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, 572 <&gcc GCC_USB0_MASTER_CLK>, 573 <&gcc GCC_USB0_MOCK_UTMI_CLK>; 574 assigned-clock-rates = <133330000>, 575 <133330000>, 576 <19200000>; 577 578 resets = <&gcc GCC_USB0_BCR>; 579 status = "disabled"; 580 581 dwc_0: usb@8a00000 { 582 compatible = "snps,dwc3"; 583 reg = <0x8a00000 0xcd00>; 584 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; 585 phys = <&qusb_phy_0>, <&usb0_ssphy>; 586 phy-names = "usb2-phy", "usb3-phy"; 587 snps,is-utmi-l1-suspend; 588 snps,hird-threshold = /bits/ 8 <0x0>; 589 snps,dis_u2_susphy_quirk; 590 snps,dis_u3_susphy_quirk; 591 dr_mode = "host"; 592 }; 593 }; 594 595 usb_1: usb@8cf8800 { 596 compatible = "qcom,ipq8074-dwc3", "qcom,dwc3"; 597 reg = <0x08cf8800 0x400>; 598 #address-cells = <1>; 599 #size-cells = <1>; 600 ranges; 601 602 clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>, 603 <&gcc GCC_USB1_MASTER_CLK>, 604 <&gcc GCC_USB1_SLEEP_CLK>, 605 <&gcc GCC_USB1_MOCK_UTMI_CLK>; 606 clock-names = "cfg_noc", 607 "core", 608 "sleep", 609 "mock_utmi"; 610 611 assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>, 612 <&gcc GCC_USB1_MASTER_CLK>, 613 <&gcc GCC_USB1_MOCK_UTMI_CLK>; 614 assigned-clock-rates = <133330000>, 615 <133330000>, 616 <19200000>; 617 618 resets = <&gcc GCC_USB1_BCR>; 619 status = "disabled"; 620 621 dwc_1: usb@8c00000 { 622 compatible = "snps,dwc3"; 623 reg = <0x8c00000 0xcd00>; 624 interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; 625 phys = <&qusb_phy_1>, <&usb1_ssphy>; 626 phy-names = "usb2-phy", "usb3-phy"; 627 snps,is-utmi-l1-suspend; 628 snps,hird-threshold = /bits/ 8 <0x0>; 629 snps,dis_u2_susphy_quirk; 630 snps,dis_u3_susphy_quirk; 631 dr_mode = "host"; 632 }; 633 }; 634 635 intc: interrupt-controller@b000000 { 636 compatible = "qcom,msm-qgic2"; 637 #address-cells = <1>; 638 #size-cells = <1>; 639 interrupt-controller; 640 #interrupt-cells = <0x3>; 641 reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; 642 ranges = <0 0xb00a000 0xffd>; 643 644 v2m@0 { 645 compatible = "arm,gic-v2m-frame"; 646 msi-controller; 647 reg = <0x0 0xffd>; 648 }; 649 }; 650 651 timer { 652 compatible = "arm,armv8-timer"; 653 interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 654 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 655 <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 656 <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; 657 }; 658 659 watchdog: watchdog@b017000 { 660 compatible = "qcom,kpss-wdt"; 661 reg = <0xb017000 0x1000>; 662 interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; 663 clocks = <&sleep_clk>; 664 timeout-sec = <30>; 665 }; 666 667 timer@b120000 { 668 #address-cells = <1>; 669 #size-cells = <1>; 670 ranges; 671 compatible = "arm,armv7-timer-mem"; 672 reg = <0x0b120000 0x1000>; 673 674 frame@b120000 { 675 frame-number = <0>; 676 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, 677 <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 678 reg = <0x0b121000 0x1000>, 679 <0x0b122000 0x1000>; 680 }; 681 682 frame@b123000 { 683 frame-number = <1>; 684 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; 685 reg = <0x0b123000 0x1000>; 686 status = "disabled"; 687 }; 688 689 frame@b124000 { 690 frame-number = <2>; 691 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 692 reg = <0x0b124000 0x1000>; 693 status = "disabled"; 694 }; 695 696 frame@b125000 { 697 frame-number = <3>; 698 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; 699 reg = <0x0b125000 0x1000>; 700 status = "disabled"; 701 }; 702 703 frame@b126000 { 704 frame-number = <4>; 705 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 706 reg = <0x0b126000 0x1000>; 707 status = "disabled"; 708 }; 709 710 frame@b127000 { 711 frame-number = <5>; 712 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 713 reg = <0x0b127000 0x1000>; 714 status = "disabled"; 715 }; 716 717 frame@b128000 { 718 frame-number = <6>; 719 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 720 reg = <0x0b128000 0x1000>; 721 status = "disabled"; 722 }; 723 }; 724 725 pcie1: pci@10000000 { 726 compatible = "qcom,pcie-ipq8074"; 727 reg = <0x10000000 0xf1d>, 728 <0x10000f20 0xa8>, 729 <0x00088000 0x2000>, 730 <0x10100000 0x1000>; 731 reg-names = "dbi", "elbi", "parf", "config"; 732 device_type = "pci"; 733 linux,pci-domain = <1>; 734 bus-range = <0x00 0xff>; 735 num-lanes = <1>; 736 #address-cells = <3>; 737 #size-cells = <2>; 738 739 phys = <&pcie_phy1>; 740 phy-names = "pciephy"; 741 742 ranges = <0x81000000 0 0x10200000 0x10200000 743 0 0x100000 /* downstream I/O */ 744 0x82000000 0 0x10300000 0x10300000 745 0 0xd00000>; /* non-prefetchable memory */ 746 747 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; 748 interrupt-names = "msi"; 749 #interrupt-cells = <1>; 750 interrupt-map-mask = <0 0 0 0x7>; 751 interrupt-map = <0 0 0 1 &intc 0 142 752 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ 753 <0 0 0 2 &intc 0 143 754 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ 755 <0 0 0 3 &intc 0 144 756 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ 757 <0 0 0 4 &intc 0 145 758 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ 759 760 clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>, 761 <&gcc GCC_PCIE1_AXI_M_CLK>, 762 <&gcc GCC_PCIE1_AXI_S_CLK>, 763 <&gcc GCC_PCIE1_AHB_CLK>, 764 <&gcc GCC_PCIE1_AUX_CLK>; 765 clock-names = "iface", 766 "axi_m", 767 "axi_s", 768 "ahb", 769 "aux"; 770 resets = <&gcc GCC_PCIE1_PIPE_ARES>, 771 <&gcc GCC_PCIE1_SLEEP_ARES>, 772 <&gcc GCC_PCIE1_CORE_STICKY_ARES>, 773 <&gcc GCC_PCIE1_AXI_MASTER_ARES>, 774 <&gcc GCC_PCIE1_AXI_SLAVE_ARES>, 775 <&gcc GCC_PCIE1_AHB_ARES>, 776 <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>; 777 reset-names = "pipe", 778 "sleep", 779 "sticky", 780 "axi_m", 781 "axi_s", 782 "ahb", 783 "axi_m_sticky"; 784 status = "disabled"; 785 }; 786 787 pcie0: pci@20000000 { 788 compatible = "qcom,pcie-ipq8074"; 789 reg = <0x20000000 0xf1d>, 790 <0x20000f20 0xa8>, 791 <0x00080000 0x2000>, 792 <0x20100000 0x1000>; 793 reg-names = "dbi", "elbi", "parf", "config"; 794 device_type = "pci"; 795 linux,pci-domain = <0>; 796 bus-range = <0x00 0xff>; 797 num-lanes = <1>; 798 #address-cells = <3>; 799 #size-cells = <2>; 800 801 phys = <&pcie_phy0>; 802 phy-names = "pciephy"; 803 804 ranges = <0x81000000 0 0x20200000 0x20200000 805 0 0x100000 /* downstream I/O */ 806 0x82000000 0 0x20300000 0x20300000 807 0 0xd00000>; /* non-prefetchable memory */ 808 809 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; 810 interrupt-names = "msi"; 811 #interrupt-cells = <1>; 812 interrupt-map-mask = <0 0 0 0x7>; 813 interrupt-map = <0 0 0 1 &intc 0 75 814 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ 815 <0 0 0 2 &intc 0 78 816 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ 817 <0 0 0 3 &intc 0 79 818 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ 819 <0 0 0 4 &intc 0 83 820 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ 821 822 clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, 823 <&gcc GCC_PCIE0_AXI_M_CLK>, 824 <&gcc GCC_PCIE0_AXI_S_CLK>, 825 <&gcc GCC_PCIE0_AHB_CLK>, 826 <&gcc GCC_PCIE0_AUX_CLK>; 827 828 clock-names = "iface", 829 "axi_m", 830 "axi_s", 831 "ahb", 832 "aux"; 833 resets = <&gcc GCC_PCIE0_PIPE_ARES>, 834 <&gcc GCC_PCIE0_SLEEP_ARES>, 835 <&gcc GCC_PCIE0_CORE_STICKY_ARES>, 836 <&gcc GCC_PCIE0_AXI_MASTER_ARES>, 837 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, 838 <&gcc GCC_PCIE0_AHB_ARES>, 839 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>; 840 reset-names = "pipe", 841 "sleep", 842 "sticky", 843 "axi_m", 844 "axi_s", 845 "ahb", 846 "axi_m_sticky"; 847 status = "disabled"; 848 }; 849 }; 850};