cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

pm6150.dtsi (2402B)

      1// SPDX-License-Identifier: BSD-3-Clause
      2// Copyright (c) 2019, The Linux Foundation. All rights reserved.
      3
      4#include <dt-bindings/iio/qcom,spmi-vadc.h>
      5#include <dt-bindings/input/linux-event-codes.h>
      6#include <dt-bindings/interrupt-controller/irq.h>
      7#include <dt-bindings/spmi/spmi.h>
      8#include <dt-bindings/thermal/thermal.h>
      9
     10/ {
     11	thermal-zones {
     12		pm6150_thermal: pm6150-thermal {
     13			polling-delay-passive = <100>;
     14			polling-delay = <0>;
     15			thermal-sensors = <&pm6150_temp>;
     16
     17			trips {
     18				pm6150_trip0: trip0 {
     19					temperature = <95000>;
     20					hysteresis = <0>;
     21					type = "passive";
     22				};
     23
     24				pm6150_crit: crit {
     25					temperature = <115000>;
     26					hysteresis = <0>;
     27					type = "critical";
     28				};
     29			};
     30		};
     31	};
     32};
     33
     34&spmi_bus {
     35	pm6150_lsid0: pmic@0 {
     36		compatible = "qcom,pm6150", "qcom,spmi-pmic";
     37		reg = <0x0 SPMI_USID>;
     38		#address-cells = <1>;
     39		#size-cells = <0>;
     40
     41		pm6150_pon: pon@800 {
     42			compatible = "qcom,pm8998-pon";
     43			reg = <0x800>;
     44			mode-bootloader = <0x2>;
     45			mode-recovery = <0x1>;
     46
     47			pm6150_pwrkey: pwrkey {
     48				compatible = "qcom,pm8941-pwrkey";
     49				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
     50				debounce = <15625>;
     51				bias-pull-up;
     52				linux,code = <KEY_POWER>;
     53			};
     54		};
     55
     56		pm6150_temp: temp-alarm@2400 {
     57			compatible = "qcom,spmi-temp-alarm";
     58			reg = <0x2400>;
     59			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
     60			io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
     61			io-channel-names = "thermal";
     62			#thermal-sensor-cells = <0>;
     63		};
     64
     65		pm6150_adc: adc@3100 {
     66			compatible = "qcom,spmi-adc5";
     67			reg = <0x3100>;
     68			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
     69			#address-cells = <1>;
     70			#size-cells = <0>;
     71			#io-channel-cells = <1>;
     72
     73			adc-chan@6 {
     74				reg = <ADC5_DIE_TEMP>;
     75				label = "die_temp";
     76			};
     77		};
     78
     79		pm6150_adc_tm: adc-tm@3500 {
     80			compatible = "qcom,spmi-adc-tm5";
     81			reg = <0x3500>;
     82			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
     83			#thermal-sensor-cells = <1>;
     84			#address-cells = <1>;
     85			#size-cells = <0>;
     86			status = "disabled";
     87		};
     88
     89		pm6150_gpio: gpios@c000 {
     90			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
     91			reg = <0xc000>;
     92			gpio-controller;
     93			gpio-ranges = <&pm6150_gpio 0 0 10>;
     94			#gpio-cells = <2>;
     95			interrupt-controller;
     96			#interrupt-cells = <2>;
     97		};
     98	};
     99
    100	pm6150_lsid1: pmic@1 {
    101		compatible = "qcom,pm6150", "qcom,spmi-pmic";
    102		reg = <0x1 SPMI_USID>;
    103		#address-cells = <1>;
    104		#size-cells = <0>;
    105	};
    106};