cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

pmm8155au_1.dtsi (2766B)

      1// SPDX-License-Identifier: BSD-3-Clause
      2/*
      3 * Copyright (c) 2021, Linaro Limited
      4 */
      5
      6#include <dt-bindings/input/input.h>
      7#include <dt-bindings/interrupt-controller/irq.h>
      8#include <dt-bindings/spmi/spmi.h>
      9#include <dt-bindings/iio/qcom,spmi-vadc.h>
     10
     11/ {
     12	thermal-zones {
     13		pmm8155au-1-thermal {
     14			polling-delay-passive = <100>;
     15			polling-delay = <0>;
     16
     17			thermal-sensors = <&pmm8155au_1_temp>;
     18
     19			trips {
     20				trip0 {
     21					temperature = <95000>;
     22					hysteresis = <0>;
     23					type = "passive";
     24				};
     25
     26				trip1 {
     27					temperature = <115000>;
     28					hysteresis = <0>;
     29					type = "hot";
     30				};
     31
     32				trip2 {
     33					temperature = <145000>;
     34					hysteresis = <0>;
     35					type = "critical";
     36				};
     37			};
     38		};
     39	};
     40};
     41
     42&spmi_bus {
     43	pmic@0 {
     44		compatible = "qcom,pmm8155au", "qcom,spmi-pmic";
     45		reg = <0x0 SPMI_USID>;
     46		#address-cells = <1>;
     47		#size-cells = <0>;
     48
     49		pon: power-on@800 {
     50			compatible = "qcom,pm8916-pon";
     51			reg = <0x0800>;
     52			pwrkey {
     53				compatible = "qcom,pm8941-pwrkey";
     54				interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
     55				debounce = <15625>;
     56				bias-pull-up;
     57				linux,code = <KEY_POWER>;
     58
     59				status = "disabled";
     60			};
     61		};
     62
     63		pmm8155au_1_temp: temp-alarm@2400 {
     64			compatible = "qcom,spmi-temp-alarm";
     65			reg = <0x2400>;
     66			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
     67			io-channels = <&pmm8155au_1_adc ADC5_DIE_TEMP>;
     68			io-channel-names = "thermal";
     69			#thermal-sensor-cells = <0>;
     70		};
     71
     72		pmm8155au_1_adc: adc@3100 {
     73			compatible = "qcom,spmi-adc5";
     74			reg = <0x3100>;
     75			#address-cells = <1>;
     76			#size-cells = <0>;
     77			#io-channel-cells = <1>;
     78			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
     79
     80			ref-gnd@0 {
     81				reg = <ADC5_REF_GND>;
     82				qcom,pre-scaling = <1 1>;
     83				label = "ref_gnd";
     84			};
     85
     86			vref-1p25@1 {
     87				reg = <ADC5_1P25VREF>;
     88				qcom,pre-scaling = <1 1>;
     89				label = "vref_1p25";
     90			};
     91
     92			die-temp@6 {
     93				reg = <ADC5_DIE_TEMP>;
     94				qcom,pre-scaling = <1 1>;
     95				label = "die_temp";
     96			};
     97		};
     98
     99		pmm8155au_1_adc_tm: adc-tm@3500 {
    100			compatible = "qcom,spmi-adc-tm5";
    101			reg = <0x3500>;
    102			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
    103			#thermal-sensor-cells = <1>;
    104			#address-cells = <1>;
    105			#size-cells = <0>;
    106			status = "disabled";
    107		};
    108
    109		pmm8155au_1_rtc: rtc@6000 {
    110			compatible = "qcom,pm8941-rtc";
    111			reg = <0x6000>;
    112			reg-names = "rtc", "alarm";
    113			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
    114
    115			status = "disabled";
    116		};
    117
    118		pmm8155au_1_gpios: gpio@c000 {
    119			compatible = "qcom,pmm8155au-gpio";
    120			reg = <0xc000>;
    121			gpio-controller;
    122			#gpio-cells = <2>;
    123			gpio-ranges = <&pmm8155au_1_gpios 0 0 10>;
    124			interrupt-controller;
    125			#interrupt-cells = <2>;
    126		};
    127	};
    128
    129	pmic@1 {
    130		compatible = "qcom,pmm8155au", "qcom,spmi-pmic";
    131		reg = <0x1 SPMI_USID>;
    132		#address-cells = <1>;
    133		#size-cells = <0>;
    134	};
    135};