cachepc-linux

Fork of AMDESE/linux with modifications for CachePC side-channel attack
git clone https://git.sinitax.com/sinitax/cachepc-linux
Log | Files | Refs | README | LICENSE | sfeed.txt

pmm8155au_2.dtsi (2090B)

      1// SPDX-License-Identifier: BSD-3-Clause
      2/*
      3 * Copyright (c) 2021, Linaro Limited
      4 */
      5
      6#include <dt-bindings/input/input.h>
      7#include <dt-bindings/interrupt-controller/irq.h>
      8#include <dt-bindings/spmi/spmi.h>
      9
     10/ {
     11	thermal-zones {
     12		pmm8155au-2-thermal {
     13			polling-delay-passive = <100>;
     14			polling-delay = <0>;
     15
     16			thermal-sensors = <&pmm8155au_2_temp>;
     17
     18			trips {
     19				trip0 {
     20					temperature = <95000>;
     21					hysteresis = <0>;
     22					type = "passive";
     23				};
     24
     25				trip1 {
     26					temperature = <115000>;
     27					hysteresis = <0>;
     28					type = "hot";
     29				};
     30
     31				trip2 {
     32					temperature = <145000>;
     33					hysteresis = <0>;
     34					type = "critical";
     35				};
     36			};
     37		};
     38	};
     39};
     40
     41&spmi_bus {
     42	pmic@4 {
     43		compatible = "qcom,pmm8155au", "qcom,spmi-pmic";
     44		reg = <0x4 SPMI_USID>;
     45		#address-cells = <1>;
     46		#size-cells = <0>;
     47
     48		power-on@800 {
     49			compatible = "qcom,pm8916-pon";
     50			reg = <0x0800>;
     51
     52			status = "disabled";
     53		};
     54
     55		pmm8155au_2_temp: temp-alarm@2400 {
     56			compatible = "qcom,spmi-temp-alarm";
     57			reg = <0x2400>;
     58			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
     59			io-channels = <&pmm8155au_2_adc ADC5_DIE_TEMP>;
     60			io-channel-names = "thermal";
     61			#thermal-sensor-cells = <0>;
     62		};
     63
     64		pmm8155au_2_adc: adc@3100 {
     65			compatible = "qcom,spmi-adc5";
     66			reg = <0x3100>;
     67			#address-cells = <1>;
     68			#size-cells = <0>;
     69			#io-channel-cells = <1>;
     70			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
     71
     72			ref-gnd@0 {
     73				reg = <ADC5_REF_GND>;
     74				qcom,pre-scaling = <1 1>;
     75				label = "ref_gnd";
     76			};
     77
     78			vref-1p25@1 {
     79				reg = <ADC5_1P25VREF>;
     80				qcom,pre-scaling = <1 1>;
     81				label = "vref_1p25";
     82			};
     83
     84			die-temp@6 {
     85				reg = <ADC5_DIE_TEMP>;
     86				qcom,pre-scaling = <1 1>;
     87				label = "die_temp";
     88			};
     89		};
     90
     91		pmm8155au_2_gpios: gpio@c000 {
     92			compatible = "qcom,pmm8155au-gpio";
     93			reg = <0xc000>;
     94			gpio-controller;
     95			#gpio-cells = <2>;
     96			gpio-ranges = <&pmm8155au_2_gpios 0 0 10>;
     97			interrupt-controller;
     98			#interrupt-cells = <2>;
     99		};
    100	};
    101
    102	pmic@5 {
    103		compatible = "qcom,pmm8155au", "qcom,spmi-pmic";
    104		reg = <0x5 SPMI_USID>;
    105		#address-cells = <1>;
    106		#size-cells = <0>;
    107	};
    108};