sc7280-herobrine-villager-r0.dts (5496B)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Google Villager board device tree source 4 * 5 * Copyright 2022 Google LLC. 6 */ 7 8/dts-v1/; 9 10#include "sc7280-herobrine.dtsi" 11 12/ { 13 model = "Google Villager (rev0+)"; 14 compatible = "google,villager", "qcom,sc7280"; 15}; 16 17/* 18 * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES 19 * 20 * Sort order matches the order in the parent files (parents before children). 21 */ 22 23&pp3300_codec { 24 status = "okay"; 25}; 26 27/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */ 28 29ap_tp_i2c: &i2c0 { 30 status = "okay"; 31 clock-frequency = <400000>; 32 33 trackpad: trackpad@2c { 34 compatible = "hid-over-i2c"; 35 reg = <0x2c>; 36 pinctrl-names = "default"; 37 pinctrl-0 = <&tp_int_odl>; 38 39 interrupt-parent = <&tlmm>; 40 interrupts = <7 IRQ_TYPE_EDGE_FALLING>; 41 42 hid-descr-addr = <0x20>; 43 vcc-supply = <&pp3300_z1>; 44 45 wakeup-source; 46 }; 47}; 48 49&ap_sar_sensor_i2c { 50 status = "okay"; 51}; 52 53&ap_sar_sensor0 { 54 status = "okay"; 55}; 56 57&ap_sar_sensor1 { 58 status = "okay"; 59}; 60 61&mdss_edp { 62 status = "okay"; 63}; 64 65&mdss_edp_phy { 66 status = "okay"; 67}; 68 69/* For nvme */ 70&pcie1 { 71 status = "okay"; 72}; 73 74/* For nvme */ 75&pcie1_phy { 76 status = "okay"; 77}; 78 79/* For eMMC */ 80&sdhc_1 { 81 status = "okay"; 82}; 83 84/* PINCTRL - BOARD-SPECIFIC */ 85 86/* 87 * Methodology for gpio-line-names: 88 * - If a pin goes to herobrine board and is named it gets that name. 89 * - If a pin goes to herobrine board and is not named, it gets no name. 90 * - If a pin is totally internal to Qcard then it gets Qcard name. 91 * - If a pin is not hooked up on Qcard, it gets no name. 92 */ 93 94&pm8350c_gpios { 95 gpio-line-names = "FLASH_STROBE_1", /* 1 */ 96 "AP_SUSPEND", 97 "PM8008_1_RST_N", 98 "", 99 "", 100 "", 101 "PMIC_EDP_BL_EN", 102 "PMIC_EDP_BL_PWM", 103 ""; 104}; 105 106&tlmm { 107 gpio-line-names = "AP_TP_I2C_SDA", /* 0 */ 108 "AP_TP_I2C_SCL", 109 "SSD_RST_L", 110 "PE_WAKE_ODL", 111 "AP_SAR_SDA", 112 "AP_SAR_SCL", 113 "PRB_SC_GPIO_6", 114 "TP_INT_ODL", 115 "HP_I2C_SDA", 116 "HP_I2C_SCL", 117 118 "GNSS_L1_EN", /* 10 */ 119 "GNSS_L5_EN", 120 "SPI_AP_MOSI", 121 "SPI_AP_MISO", 122 "SPI_AP_CLK", 123 "SPI_AP_CS0_L", 124 /* 125 * AP_FLASH_WP is crossystem ABI. Schematics 126 * call it BIOS_FLASH_WP_OD. 127 */ 128 "AP_FLASH_WP", 129 "", 130 "AP_EC_INT_L", 131 "", 132 133 "UF_CAM_RST_L", /* 20 */ 134 "WF_CAM_RST_L", 135 "UART_AP_TX_DBG_RX", 136 "UART_DBG_TX_AP_RX", 137 "", 138 "PM8008_IRQ_1", 139 "HOST2WLAN_SOL", 140 "WLAN2HOST_SOL", 141 "MOS_BT_UART_CTS", 142 "MOS_BT_UART_RFR", 143 144 "MOS_BT_UART_TX", /* 30 */ 145 "MOS_BT_UART_RX", 146 "PRB_SC_GPIO_32", 147 "HUB_RST_L", 148 "", 149 "", 150 "AP_SPI_FP_MISO", 151 "AP_SPI_FP_MOSI", 152 "AP_SPI_FP_CLK", 153 "AP_SPI_FP_CS_L", 154 155 "AP_EC_SPI_MISO", /* 40 */ 156 "AP_EC_SPI_MOSI", 157 "AP_EC_SPI_CLK", 158 "AP_EC_SPI_CS_L", 159 "LCM_RST_L", 160 "EARLY_EUD_N", 161 "", 162 "DP_HOT_PLUG_DET", 163 "IO_BRD_MLB_ID0", 164 "IO_BRD_MLB_ID1", 165 166 "IO_BRD_MLB_ID2", /* 50 */ 167 "SSD_EN", 168 "TS_I2C_SDA_CONN", 169 "TS_I2C_CLK_CONN", 170 "TS_RST_CONN", 171 "TS_INT_CONN", 172 "AP_I2C_TPM_SDA", 173 "AP_I2C_TPM_SCL", 174 "PRB_SC_GPIO_58", 175 "PRB_SC_GPIO_59", 176 177 "EDP_HOT_PLUG_DET_N", /* 60 */ 178 "FP_TO_AP_IRQ_L", 179 "", 180 "AMP_EN", 181 "CAM0_MCLK_GPIO_64", 182 "CAM1_MCLK_GPIO_65", 183 "WF_CAM_MCLK", 184 "PRB_SC_GPIO_67", 185 "FPMCU_BOOT0", 186 "UF_CAM_SDA", 187 188 "UF_CAM_SCL", /* 70 */ 189 "", 190 "", 191 "WF_CAM_SDA", 192 "WF_CAM_SCL", 193 "", 194 "", 195 "EN_FP_RAILS", 196 "FP_RST_L", 197 "PCIE1_CLKREQ_ODL", 198 199 "EN_PP3300_DX_EDP", /* 80 */ 200 "SC_GPIO_81", 201 "FORCED_USB_BOOT", 202 "WCD_RESET_N", 203 "MOS_WLAN_EN", 204 "MOS_BT_EN", 205 "MOS_SW_CTRL", 206 "MOS_PCIE0_RST", 207 "MOS_PCIE0_CLKREQ_N", 208 "MOS_PCIE0_WAKE_N", 209 210 "MOS_LAA_AS_EN", /* 90 */ 211 "SD_CD_ODL", 212 "", 213 "", 214 "MOS_BT_WLAN_SLIMBUS_CLK", 215 "MOS_BT_WLAN_SLIMBUS_DAT0", 216 "HP_MCLK", 217 "HP_BCLK", 218 "HP_DOUT", 219 "HP_DIN", 220 221 "HP_LRCLK", /* 100 */ 222 "HP_IRQ", 223 "", 224 "", 225 "GSC_AP_INT_ODL", 226 "EN_PP3300_CODEC", 227 "AMP_BCLK", 228 "AMP_DIN", 229 "AMP_LRCLK", 230 "UIM1_DATA_GPIO_109", 231 232 "UIM1_CLK_GPIO_110", /* 110 */ 233 "UIM1_RESET_GPIO_111", 234 "PRB_SC_GPIO_112", 235 "UIM0_DATA", 236 "UIM0_CLK", 237 "UIM0_RST", 238 "UIM0_PRESENT_ODL", 239 "SDM_RFFE0_CLK", 240 "SDM_RFFE0_DATA", 241 "WF_CAM_EN", 242 243 "FASTBOOT_SEL_0", /* 120 */ 244 "SC_GPIO_121", 245 "FASTBOOT_SEL_1", 246 "SC_GPIO_123", 247 "FASTBOOT_SEL_2", 248 "SM_RFFE4_CLK_GRFC_8", 249 "SM_RFFE4_DATA_GRFC_9", 250 "WLAN_COEX_UART1_RX", 251 "WLAN_COEX_UART1_TX", 252 "PRB_SC_GPIO_129", 253 254 "LCM_ID0", /* 130 */ 255 "LCM_ID1", 256 "", 257 "SDR_QLINK_REQ", 258 "SDR_QLINK_EN", 259 "QLINK0_WMSS_RESET_N", 260 "SMR526_QLINK1_REQ", 261 "SMR526_QLINK1_EN", 262 "SMR526_QLINK1_WMSS_RESET_N", 263 "PRB_SC_GPIO_139", 264 265 "SAR1_IRQ_ODL", /* 140 */ 266 "SAR0_IRQ_ODL", 267 "PRB_SC_GPIO_142", 268 "", 269 "WCD_SWR_TX_CLK", 270 "WCD_SWR_TX_DATA0", 271 "WCD_SWR_TX_DATA1", 272 "WCD_SWR_RX_CLK", 273 "WCD_SWR_RX_DATA0", 274 "WCD_SWR_RX_DATA1", 275 276 "DMIC01_CLK", /* 150 */ 277 "DMIC01_DATA", 278 "DMIC23_CLK", 279 "DMIC23_DATA", 280 "", 281 "", 282 "EC_IN_RW_ODL", 283 "HUB_EN", 284 "WCD_SWR_TX_DATA2", 285 "", 286 287 "", /* 160 */ 288 "", 289 "", 290 "", 291 "", 292 "", 293 "", 294 "", 295 "", 296 "", 297 298 "", /* 170 */ 299 "MOS_BLE_UART_TX", 300 "MOS_BLE_UART_RX", 301 "", 302 "", 303 ""; 304};