sdm630-sony-xperia-nile.dtsi (14292B)
1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2020, Konrad Dybcio <konrad.dybcio@somainline.org> 4 * Copyright (c) 2020, AngeloGioacchino Del Regno 5 * <angelogioacchino.delregno@somainline.org> 6 */ 7 8#include "pm660.dtsi" 9#include "pm660l.dtsi" 10#include <dt-bindings/gpio/gpio.h> 11#include <dt-bindings/input/input.h> 12#include <dt-bindings/input/gpio-keys.h> 13 14/ { 15 /* required for bootloader to select correct board */ 16 qcom,msm-id = <318 0>; 17 qcom,board-id = <8 1>; 18 qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>; 19 20 /* This part enables graphical output via bootloader-enabled display */ 21 chosen { 22 bootargs = "earlycon=tty0 console=tty0"; 23 24 #address-cells = <2>; 25 #size-cells = <2>; 26 ranges; 27 28 stdout-path = "framebuffer0"; 29 30 framebuffer0: framebuffer@9d400000 { 31 compatible = "simple-framebuffer"; 32 reg = <0 0x9d400000 0 (1920 * 1080 * 4)>; 33 width = <1080>; 34 height = <1920>; 35 stride = <(1080 * 4)>; 36 format = "a8r8g8b8"; 37 status= "okay"; 38 }; 39 }; 40 41 board_vbat: vbat-regulator { 42 compatible = "regulator-fixed"; 43 regulator-name = "VBAT"; 44 45 regulator-min-microvolt = <4000000>; 46 regulator-max-microvolt = <4000000>; 47 regulator-always-on; 48 regulator-boot-on; 49 }; 50 51 vph_pwr: vph-pwr-regulator { 52 compatible = "regulator-fixed"; 53 regulator-name = "vph_pwr"; 54 55 regulator-always-on; 56 regulator-boot-on; 57 }; 58 59 cam_vdig_imx300_219_vreg: cam_vdig_imx300_219_vreg { 60 compatible = "regulator-fixed"; 61 regulator-name = "cam_vdig_imx300_219_vreg"; 62 startup-delay-us = <0>; 63 enable-active-high; 64 gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>; 65 pinctrl-names = "default"; 66 pinctrl-0 = <&cam_vdig_default>; 67 }; 68 69 cam_vana_front_vreg: cam_vana_front_vreg { 70 compatible = "regulator-fixed"; 71 regulator-name = "cam_vana_front_vreg"; 72 startup-delay-us = <0>; 73 enable-active-high; 74 gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>; 75 pinctrl-names = "default"; 76 pinctrl-0 = <&imx219_vana_default>; 77 }; 78 79 cam_vana_rear_vreg: cam_vana_rear_vreg { 80 compatible = "regulator-fixed"; 81 regulator-name = "cam_vana_rear_vreg"; 82 startup-delay-us = <0>; 83 enable-active-high; 84 gpio = <&tlmm 50 GPIO_ACTIVE_HIGH>; 85 regulator-always-on; 86 pinctrl-names = "default"; 87 pinctrl-0 = <&imx300_vana_default>; 88 }; 89 90 gpio_keys { 91 status = "okay"; 92 compatible = "gpio-keys"; 93 #address-cells = <1>; 94 #size-cells = <0>; 95 96 camera_focus { 97 label = "Camera Focus"; 98 gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; 99 linux,input-type = <1>; 100 linux,code = <KEY_CAMERA_FOCUS>; 101 debounce-interval = <15>; 102 }; 103 104 camera_snapshot { 105 label = "Camera Snapshot"; 106 gpios = <&tlmm 113 GPIO_ACTIVE_LOW>; 107 linux,input-type = <1>; 108 linux,code = <KEY_CAMERA>; 109 debounce-interval = <15>; 110 }; 111 112 vol_down { 113 label = "Volume Down"; 114 gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; 115 linux,input-type = <1>; 116 linux,code = <KEY_VOLUMEDOWN>; 117 gpio-key,wakeup; 118 debounce-interval = <15>; 119 }; 120 }; 121 122 reserved-memory { 123 #address-cells = <2>; 124 #size-cells = <2>; 125 ranges; 126 127 ramoops@ffc00000 { 128 compatible = "ramoops"; 129 reg = <0x0 0xffc00000 0x0 0x100000>; 130 record-size = <0x10000>; 131 console-size = <0x60000>; 132 ftrace-size = <0x10000>; 133 pmsg-size = <0x20000>; 134 ecc-size = <16>; 135 status = "okay"; 136 }; 137 138 debug_region@ffb00000 { 139 reg = <0x00 0xffb00000 0x00 0x100000>; 140 no-map; 141 }; 142 143 removed_region@85800000 { 144 reg = <0x00 0x85800000 0x00 0x3700000>; 145 no-map; 146 }; 147 }; 148 149 /* 150 * Until we hook up type-c detection, we 151 * have to stick with this. But it works. 152 */ 153 extcon_usb: extcon-usb { 154 compatible = "linux,extcon-usb-gpio"; 155 id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>; 156 }; 157}; 158 159&adsp_pil { 160 firmware-name = "adsp.mdt"; 161}; 162 163&blsp_i2c1 { 164 status = "okay"; 165 166 touchscreen: synaptics-rmi4-i2c@70 { 167 compatible = "syna,rmi4-i2c"; 168 reg = <0x70>; 169 #address-cells = <1>; 170 #size-cells = <0>; 171 interrupts-extended = <&tlmm 45 0x2008>; 172 173 pinctrl-names = "default"; 174 pinctrl-0 = <&ts_int_active &ts_lcd_id_active>; 175 176 syna,reset-delay-ms = <200>; 177 syna,startup-delay-ms = <220>; 178 179 rmi4-f01@1 { 180 reg = <0x01>; 181 syna,nosleep-mode = <1>; 182 }; 183 184 rmi4-f11@11 { 185 reg = <0x11>; 186 syna,sensor-type = <1>; 187 }; 188 }; 189}; 190 191&blsp_i2c2 { 192 status = "okay"; 193 194 /* SMB1351 charger */ 195}; 196 197/* I2C3, 4, 5, 7 and 8 are disabled on this board. */ 198 199&blsp_i2c6 { 200 status = "okay"; 201 202 /* NXP NFC */ 203}; 204 205&blsp1_uart2 { 206 status = "okay"; 207 208 /* MSM serial console */ 209}; 210 211&blsp2_uart1 { 212 status = "okay"; 213 214 /* HCI Bluetooth */ 215}; 216 217&pon_pwrkey { 218 status = "okay"; 219}; 220 221&pon_resin { 222 status = "okay"; 223 224 linux,code = <KEY_VOLUMEUP>; 225}; 226 227&qusb2phy { 228 status = "okay"; 229 230 vdd-supply = <&vreg_l1b_0p925>; 231 vdda-pll-supply = <&vreg_l10a_1p8>; 232 vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; 233}; 234 235&rpm_requests { 236 pm660l-regulators { 237 compatible = "qcom,rpm-pm660l-regulators"; 238 239 vdd_s1-supply = <&vph_pwr>; 240 vdd_s2-supply = <&vph_pwr>; 241 vdd_s3_s4-supply = <&vph_pwr>; 242 vdd_s5-supply = <&vph_pwr>; 243 vdd_s6-supply = <&vph_pwr>; 244 245 vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>; 246 vdd_l2-supply = <&vreg_bob>; 247 vdd_l3_l5_l7_l8-supply = <&vreg_bob>; 248 vdd_l4_l6-supply = <&vreg_bob>; 249 vdd_bob-supply = <&vph_pwr>; 250 251 vreg_s1b_1p125: s1 { 252 regulator-min-microvolt = <1125000>; 253 regulator-max-microvolt = <1125000>; 254 regulator-enable-ramp-delay = <200>; 255 regulator-ramp-delay = <0>; 256 }; 257 258 vreg_s2b_1p05: s2 { 259 regulator-min-microvolt = <1050000>; 260 regulator-max-microvolt = <1050000>; 261 regulator-enable-ramp-delay = <200>; 262 regulator-ramp-delay = <0>; 263 }; 264 265 /* 266 * At least on Nile's configuration, S3B/S4B (VDD_CX) and 267 * S5B (VDD_MX) are managed only through RPM Power Domains. 268 * Trying to set a voltage on the main supply will create 269 * havoc and freeze the SoC. 270 * In any case, reference voltages for these regulators are: 271 * S3B/S4B: 0.870V 272 * S5B: 0.915V 273 */ 274 275 /* LDOs */ 276 vreg_l1b_0p925: l1 { 277 regulator-min-microvolt = <920000>; 278 regulator-max-microvolt = <928000>; 279 regulator-enable-ramp-delay = <250>; 280 regulator-ramp-delay = <0>; 281 regulator-allow-set-load; 282 }; 283 284 vreg_l2b_2p95: l2 { 285 /* 286 * This regulator supports 1.648 - 3.104V on this board 287 * but we set a max voltage of anything less than 2.7V 288 * to satisfy a condition in sdhci.c that will disable 289 * 3.3V SDHCI signaling, which happens to be not really 290 * supported on the Xperia Nile/Ganges platform. 291 */ 292 regulator-min-microvolt = <1648000>; 293 regulator-max-microvolt = <2696000>; 294 regulator-enable-ramp-delay = <250>; 295 regulator-ramp-delay = <0>; 296 regulator-allow-set-load; 297 }; 298 299 vreg_l3b_3p0: l3 { 300 regulator-min-microvolt = <2800000>; 301 regulator-max-microvolt = <2800000>; 302 regulator-enable-ramp-delay = <250>; 303 regulator-ramp-delay = <0>; 304 regulator-min-microamp = <200>; 305 regulator-max-microamp = <600000>; 306 regulator-system-load = <100000>; 307 regulator-allow-set-load; 308 }; 309 310 vreg_l4b_2p95: l4 { 311 regulator-min-microvolt = <2944000>; 312 regulator-max-microvolt = <2952000>; 313 regulator-enable-ramp-delay = <250>; 314 regulator-ramp-delay = <0>; 315 316 regulator-min-microamp = <200>; 317 regulator-max-microamp = <600000>; 318 regulator-system-load = <570000>; 319 regulator-allow-set-load; 320 }; 321 322 /* 323 * Downstream specifies a range of 1721-3600mV, 324 * but the only assigned consumers are SDHCI2 VMMC 325 * and Coresight QPDI that both request pinned 2.95V. 326 * Tighten the range to 1.8-3.328 (closest to 3.3) to 327 * make the mmc driver happy. 328 */ 329 vreg_l5b_2p95: l5 { 330 regulator-min-microvolt = <1800000>; 331 regulator-max-microvolt = <3328000>; 332 regulator-enable-ramp-delay = <250>; 333 regulator-ramp-delay = <0>; 334 regulator-allow-set-load; 335 regulator-system-load = <800000>; 336 }; 337 338 vreg_l6b_3p3: l6 { 339 regulator-min-microvolt = <1704000>; 340 regulator-max-microvolt = <3312000>; 341 regulator-enable-ramp-delay = <250>; 342 regulator-ramp-delay = <0>; 343 }; 344 345 vreg_l7b_3p125: l7 { 346 regulator-min-microvolt = <2704000>; 347 regulator-max-microvolt = <3128000>; 348 regulator-enable-ramp-delay = <250>; 349 regulator-ramp-delay = <0>; 350 }; 351 352 vreg_l8b_3p3: l8 { 353 regulator-min-microvolt = <2800000>; 354 regulator-max-microvolt = <3400000>; 355 regulator-enable-ramp-delay = <250>; 356 regulator-ramp-delay = <0>; 357 }; 358 359 /* L9B (870mV) is currently unused */ 360 /* L10B (915mV) is currently unused */ 361 362 vreg_bob: bob { 363 regulator-min-microvolt = <3304000>; 364 regulator-max-microvolt = <3624000>; 365 regulator-enable-ramp-delay = <500>; 366 regulator-ramp-delay = <0>; 367 }; 368 }; 369 370 pm660-regulators { 371 compatible = "qcom,rpm-pm660-regulators"; 372 373 vdd_s1-supply = <&vph_pwr>; 374 vdd_s2-supply = <&vph_pwr>; 375 vdd_s3-supply = <&vph_pwr>; 376 vdd_s4-supply = <&vph_pwr>; 377 vdd_s5-supply = <&vph_pwr>; 378 vdd_s6-supply = <&vph_pwr>; 379 380 vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>; 381 vdd_l2_l3-supply = <&vreg_s2b_1p05>; 382 vdd_l5-supply = <&vreg_s2b_1p05>; 383 vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>; 384 vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>; 385 386 /* 387 * S1A (FTAPC0), S2A (FTAPC1), S3A (HFAPC1) are managed 388 * by the Core Power Reduction hardened (CPRh) and the 389 * Operating State Manager (OSM) HW automatically. 390 */ 391 392 vreg_s4a_2p04: s4 { 393 regulator-min-microvolt = <2040000>; 394 regulator-max-microvolt = <2040000>; 395 regulator-enable-ramp-delay = <200>; 396 regulator-ramp-delay = <0>; 397 regulator-always-on; 398 }; 399 400 vreg_s5a_1p35: s5 { 401 regulator-min-microvolt = <1224000>; 402 regulator-max-microvolt = <1350000>; 403 regulator-enable-ramp-delay = <200>; 404 regulator-ramp-delay = <0>; 405 }; 406 407 vreg_s6a_0p87: s6 { 408 regulator-min-microvolt = <504000>; 409 regulator-max-microvolt = <992000>; 410 regulator-enable-ramp-delay = <150>; 411 regulator-ramp-delay = <0>; 412 }; 413 414 /* LDOs */ 415 vreg_l1a_1p225: l1 { 416 regulator-min-microvolt = <1226000>; 417 regulator-max-microvolt = <1250000>; 418 regulator-enable-ramp-delay = <250>; 419 regulator-ramp-delay = <0>; 420 regulator-allow-set-load; 421 }; 422 423 vreg_l2a_1p0: l2 { 424 regulator-min-microvolt = <944000>; 425 regulator-max-microvolt = <1008000>; 426 regulator-enable-ramp-delay = <250>; 427 regulator-ramp-delay = <0>; 428 }; 429 430 vreg_l3a_1p0: l3 { 431 regulator-min-microvolt = <944000>; 432 regulator-max-microvolt = <1008000>; 433 regulator-enable-ramp-delay = <250>; 434 regulator-ramp-delay = <0>; 435 }; 436 437 vreg_l5a_0p848: l5 { 438 regulator-min-microvolt = <800000>; 439 regulator-max-microvolt = <952000>; 440 regulator-enable-ramp-delay = <250>; 441 regulator-ramp-delay = <0>; 442 }; 443 444 vreg_l6a_1p3: l6 { 445 regulator-min-microvolt = <1304000>; 446 regulator-max-microvolt = <1368000>; 447 regulator-allow-set-load; 448 regulator-enable-ramp-delay = <250>; 449 regulator-ramp-delay = <0>; 450 }; 451 452 vreg_l7a_1p2: l7 { 453 regulator-min-microvolt = <1200000>; 454 regulator-max-microvolt = <1200000>; 455 regulator-enable-ramp-delay = <250>; 456 regulator-ramp-delay = <0>; 457 }; 458 459 vreg_l8a_1p8: l8 { 460 regulator-min-microvolt = <1800000>; 461 regulator-max-microvolt = <1800000>; 462 regulator-enable-ramp-delay = <250>; 463 regulator-ramp-delay = <0>; 464 regulator-system-load = <325000>; 465 regulator-allow-set-load; 466 }; 467 468 vreg_l9a_1p8: l9 { 469 regulator-min-microvolt = <1804000>; 470 regulator-max-microvolt = <1896000>; 471 regulator-enable-ramp-delay = <250>; 472 regulator-ramp-delay = <0>; 473 regulator-allow-set-load; 474 }; 475 476 vreg_l10a_1p8: l10 { 477 regulator-min-microvolt = <1800000>; 478 regulator-max-microvolt = <1944000>; 479 regulator-enable-ramp-delay = <250>; 480 regulator-ramp-delay = <0>; 481 regulator-allow-set-load; 482 }; 483 484 vreg_l11a_1p8: l11 { 485 regulator-min-microvolt = <1784000>; 486 regulator-max-microvolt = <1944000>; 487 regulator-enable-ramp-delay = <250>; 488 regulator-ramp-delay = <0>; 489 }; 490 491 vreg_l12a_1p8: l12 { 492 regulator-min-microvolt = <1800000>; 493 regulator-max-microvolt = <1944000>; 494 regulator-enable-ramp-delay = <250>; 495 regulator-ramp-delay = <0>; 496 }; 497 498 /* This gives power to the LPDDR4: never turn it off! */ 499 vreg_l13a_1p8: l13 { 500 regulator-min-microvolt = <1800000>; 501 regulator-max-microvolt = <1944000>; 502 regulator-enable-ramp-delay = <250>; 503 regulator-ramp-delay = <0>; 504 regulator-boot-on; 505 regulator-always-on; 506 }; 507 508 vreg_l14a_1p8: l14 { 509 regulator-min-microvolt = <1710000>; 510 regulator-max-microvolt = <1904000>; 511 regulator-enable-ramp-delay = <250>; 512 regulator-ramp-delay = <0>; 513 }; 514 515 vreg_l15a_1p8: l15 { 516 regulator-min-microvolt = <1648000>; 517 regulator-max-microvolt = <2952000>; 518 regulator-enable-ramp-delay = <250>; 519 regulator-ramp-delay = <0>; 520 }; 521 522 /* L16A (2.70V) is unused */ 523 524 vreg_l17a_1p8: l17 { 525 regulator-min-microvolt = <1648000>; 526 regulator-max-microvolt = <2952000>; 527 regulator-enable-ramp-delay = <250>; 528 regulator-ramp-delay = <0>; 529 }; 530 531 vreg_l18a_1v8: l18 { 532 regulator-min-microvolt = <1800000>; 533 regulator-max-microvolt = <1800000>; 534 regulator-enable-ramp-delay = <250>; 535 regulator-ramp-delay = <10>; 536 regulator-min-microamp = <200>; 537 regulator-max-microamp = <50000>; 538 regulator-system-load = <10000>; 539 regulator-allow-set-load; 540 }; 541 542 vreg_l19a_3p3: l19 { 543 regulator-min-microvolt = <3312000>; 544 regulator-max-microvolt = <3400000>; 545 regulator-enable-ramp-delay = <250>; 546 regulator-ramp-delay = <0>; 547 regulator-allow-set-load; 548 }; 549 }; 550}; 551 552&sdhc_1 { 553 status = "okay"; 554 supports-cqe; 555 556 /* SoMC Nile platform's eMMC doesn't support HS200 mode */ 557 mmc-ddr-1_8v; 558 mmc-hs400-1_8v; 559 mmc-hs400-enhanced-strobe; 560 561 vmmc-supply = <&vreg_l4b_2p95>; 562 vqmmc-supply = <&vreg_l8a_1p8>; 563}; 564 565&sdhc_2 { 566 status = "okay"; 567 568 vmmc-supply = <&vreg_l5b_2p95>; 569 vqmmc-supply = <&vreg_l2b_2p95>; 570}; 571 572&tlmm { 573 gpio-reserved-ranges = <8 4>; 574 575 ts_int_active: ts-int-active { 576 pins = "gpio45"; 577 drive-strength = <8>; 578 bias-pull-up; 579 }; 580 581 ts_lcd_id_active: ts-lcd-id-active { 582 pins = "gpio56"; 583 drive-strength = <8>; 584 bias-disable; 585 }; 586 587 imx300_vana_default: imx300-vana-default { 588 pins = "gpio50"; 589 function = "gpio"; 590 bias-disable; 591 drive-strength = <2>; 592 }; 593 594 imx219_vana_default: imx219-vana-default { 595 pins = "gpio51"; 596 function = "gpio"; 597 bias-disable; 598 drive-strength = <2>; 599 }; 600 601 cam_vdig_default: cam-vdig-default { 602 pins = "gpio52"; 603 function = "gpio"; 604 bias-disable; 605 drive-strength = <2>; 606 }; 607}; 608 609&usb3 { 610 status = "okay"; 611}; 612 613&usb3_dwc3 { 614 dr_mode = "peripheral"; 615 extcon = <&extcon_usb>; 616};