sdm845-shift-axolotl.dts (15091B)
1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Copyright (c) 2022, Alexander Martinz <amartinz@shiftphones.com> 4 * Copyright (c) 2022, Caleb Connolly <caleb@connolly.tech> 5 */ 6 7/dts-v1/; 8 9#include <dt-bindings/gpio/gpio.h> 10#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 11#include "sdm845.dtsi" 12#include "pm8998.dtsi" 13#include "pmi8998.dtsi" 14 15/ { 16 model = "SHIFT SHIFT6mq"; 17 compatible = "shift,axolotl", "qcom,sdm845"; 18 qcom,msm-id = <321 0x20001>; 19 qcom,board-id = <11 0>; 20 21 aliases { 22 display0 = &framebuffer0; 23 serial0 = &uart9; 24 }; 25 26 chosen { 27 #address-cells = <2>; 28 #size-cells = <2>; 29 ranges; 30 31 stdout-path = "serial0"; 32 33 /* Use framebuffer setup by the bootloader. */ 34 framebuffer0: framebuffer@9d400000 { 35 compatible = "simple-framebuffer"; 36 reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>; 37 width = <1080>; 38 height = <2160>; 39 stride = <(1080 * 4)>; 40 format = "a8r8g8b8"; 41 }; 42 }; 43 44 gpio-keys { 45 compatible = "gpio-keys"; 46 autorepeat; 47 48 pinctrl-names = "default"; 49 pinctrl-0 = <&volume_up_gpio>; 50 51 vol-up { 52 label = "volume_up"; 53 linux,code = <KEY_VOLUMEUP>; 54 gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; 55 debounce-interval = <15>; 56 }; 57 }; 58 59 reserved-memory { 60 framebuffer_region@9d400000 { 61 reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>; 62 no-map; 63 }; 64 65 ramoops: ramoops@b0000000 { 66 compatible = "ramoops"; 67 reg = <0 0xb0000000 0 0x00400000>; 68 record-size = <0x40000>; 69 console-size = <0x40000>; 70 ftrace-size = <0x40000>; 71 pmsg-size = <0x200000>; 72 ecc-size = <0x0>; 73 }; 74 }; 75 76 battery: battery { 77 compatible = "simple-battery"; 78 79 charge-full-design-microamp-hours = <3850000>; 80 voltage-min-design-microvolt = <3600000>; 81 voltage-max-design-microvolt = <4400000>; 82 }; 83 84 vph_pwr: vph-pwr-regulator { 85 compatible = "regulator-fixed"; 86 regulator-name = "vph_pwr"; 87 regulator-min-microvolt = <3700000>; 88 regulator-max-microvolt = <3700000>; 89 }; 90 91 vreg_s4a_1p8: pm8998-smps4 { 92 compatible = "regulator-fixed"; 93 regulator-name = "vreg_s4a_1p8"; 94 95 regulator-min-microvolt = <1800000>; 96 regulator-max-microvolt = <1800000>; 97 98 regulator-always-on; 99 regulator-boot-on; 100 101 vin-supply = <&vph_pwr>; 102 }; 103}; 104 105&adsp_pas { 106 status = "okay"; 107 firmware-name = "qcom/sdm845/axolotl/adsp.mbn"; 108}; 109 110&apps_rsc { 111 pm8998-rpmh-regulators { 112 compatible = "qcom,pm8998-rpmh-regulators"; 113 qcom,pmic-id = "a"; 114 115 vdd-s1-supply = <&vph_pwr>; 116 vdd-s2-supply = <&vph_pwr>; 117 vdd-s3-supply = <&vph_pwr>; 118 vdd-s4-supply = <&vph_pwr>; 119 vdd-s5-supply = <&vph_pwr>; 120 vdd-s6-supply = <&vph_pwr>; 121 vdd-s7-supply = <&vph_pwr>; 122 vdd-s8-supply = <&vph_pwr>; 123 vdd-s9-supply = <&vph_pwr>; 124 vdd-s10-supply = <&vph_pwr>; 125 vdd-s11-supply = <&vph_pwr>; 126 vdd-s12-supply = <&vph_pwr>; 127 vdd-s13-supply = <&vph_pwr>; 128 vdd-l1-l27-supply = <&vreg_s7a_1p025>; 129 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; 130 vdd-l3-l11-supply = <&vreg_s7a_1p025>; 131 vdd-l4-l5-supply = <&vreg_s7a_1p025>; 132 vdd-l6-supply = <&vph_pwr>; 133 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; 134 vdd-l9-supply = <&vreg_bob>; 135 vdd-l10-l23-l25-supply = <&vreg_bob>; 136 vdd-l13-l19-l21-supply = <&vreg_bob>; 137 vdd-l16-l28-supply = <&vreg_bob>; 138 vdd-l18-l22-supply = <&vreg_bob>; 139 vdd-l20-l24-supply = <&vreg_bob>; 140 vdd-l26-supply = <&vreg_s3a_1p35>; 141 vin-lvs-1-2-supply = <&vreg_s4a_1p8>; 142 143 vreg_s2a_1p125: smps2 { 144 regulator-min-microvolt = <1100000>; 145 regulator-max-microvolt = <1100000>; 146 }; 147 148 vreg_s3a_1p35: smps3 { 149 regulator-min-microvolt = <1352000>; 150 regulator-max-microvolt = <1352000>; 151 }; 152 153 vreg_s5a_2p04: smps5 { 154 regulator-min-microvolt = <1904000>; 155 regulator-max-microvolt = <2040000>; 156 }; 157 158 vreg_s7a_1p025: smps7 { 159 regulator-min-microvolt = <900000>; 160 regulator-max-microvolt = <1028000>; 161 }; 162 163 vdd_qusb_hs0: 164 vdda_hp_pcie_core: 165 vdda_mipi_csi0_0p9: 166 vdda_mipi_csi1_0p9: 167 vdda_mipi_csi2_0p9: 168 vdda_mipi_dsi0_pll: 169 vdda_mipi_dsi1_pll: 170 vdda_qlink_lv: 171 vdda_qlink_lv_ck: 172 vdda_qrefs_0p875: 173 vdda_pcie_core: 174 vdda_pll_cc_ebi01: 175 vdda_pll_cc_ebi23: 176 vdda_sp_sensor: 177 vdda_ufs1_core: 178 vdda_ufs2_core: 179 vdda_usb1_ss_core: 180 vdda_usb2_ss_core: 181 vreg_l1a_0p875: ldo1 { 182 regulator-min-microvolt = <880000>; 183 regulator-max-microvolt = <880000>; 184 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 185 }; 186 187 vddpx_10: 188 vreg_l2a_1p2: ldo2 { 189 regulator-min-microvolt = <1200000>; 190 regulator-max-microvolt = <1200000>; 191 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 192 regulator-always-on; 193 }; 194 195 vreg_l3a_1p0: ldo3 { 196 regulator-min-microvolt = <1000000>; 197 regulator-max-microvolt = <1000000>; 198 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 199 }; 200 201 vdd_wcss_cx: 202 vdd_wcss_mx: 203 vdda_wcss_pll: 204 vreg_l5a_0p8: ldo5 { 205 regulator-min-microvolt = <800000>; 206 regulator-max-microvolt = <800000>; 207 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 208 }; 209 210 vddpx_13: 211 vreg_l6a_1p8: ldo6 { 212 regulator-min-microvolt = <1856000>; 213 regulator-max-microvolt = <1856000>; 214 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 215 }; 216 217 vreg_l7a_1p8: ldo7 { 218 regulator-min-microvolt = <1800000>; 219 regulator-max-microvolt = <1800000>; 220 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 221 }; 222 223 vreg_l8a_1p2: ldo8 { 224 regulator-min-microvolt = <1200000>; 225 regulator-max-microvolt = <1248000>; 226 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 227 }; 228 229 vreg_l9a_1p8: ldo9 { 230 regulator-min-microvolt = <1704000>; 231 regulator-max-microvolt = <2928000>; 232 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 233 }; 234 235 vreg_l10a_1p8: ldo10 { 236 regulator-min-microvolt = <1704000>; 237 regulator-max-microvolt = <2928000>; 238 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 239 }; 240 241 vreg_l11a_1p0: ldo11 { 242 regulator-min-microvolt = <1000000>; 243 regulator-max-microvolt = <1048000>; 244 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 245 }; 246 247 vdd_qfprom: 248 vdd_qfprom_sp: 249 vdda_apc1_cs_1p8: 250 vdda_gfx_cs_1p8: 251 vdda_qrefs_1p8: 252 vdda_qusb_hs0_1p8: 253 vddpx_11: 254 vreg_l12a_1p8: ldo12 { 255 regulator-min-microvolt = <1800000>; 256 regulator-max-microvolt = <1800000>; 257 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 258 }; 259 260 vddpx_2: 261 vreg_l13a_2p95: ldo13 { 262 regulator-min-microvolt = <1800000>; 263 regulator-max-microvolt = <2960000>; 264 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 265 }; 266 267 vreg_l14a_1p88: ldo14 { 268 regulator-min-microvolt = <1800000>; 269 regulator-max-microvolt = <1800000>; 270 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 271 }; 272 273 vreg_l15a_1p8: ldo15 { 274 regulator-min-microvolt = <1800000>; 275 regulator-max-microvolt = <1800000>; 276 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 277 }; 278 279 vreg_l16a_2p7: ldo16 { 280 regulator-min-microvolt = <2704000>; 281 regulator-max-microvolt = <2704000>; 282 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 283 }; 284 285 vreg_l17a_1p3: ldo17 { 286 regulator-min-microvolt = <1304000>; 287 regulator-max-microvolt = <1304000>; 288 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 289 }; 290 291 vreg_l18a_2p7: ldo18 { 292 regulator-min-microvolt = <2704000>; 293 regulator-max-microvolt = <2960000>; 294 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 295 }; 296 297 vreg_l19a_3p0: ldo19 { 298 regulator-min-microvolt = <2856000>; 299 regulator-max-microvolt = <3104000>; 300 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 301 }; 302 303 vreg_l20a_2p95: ldo20 { 304 regulator-min-microvolt = <2704000>; 305 regulator-max-microvolt = <2960000>; 306 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 307 }; 308 309 vreg_l21a_2p95: ldo21 { 310 regulator-min-microvolt = <2704000>; 311 regulator-max-microvolt = <2960000>; 312 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 313 }; 314 315 vreg_l22a_2p85: ldo22 { 316 regulator-min-microvolt = <2864000>; 317 regulator-max-microvolt = <3312000>; 318 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 319 }; 320 321 vreg_l23a_3p3: ldo23 { 322 regulator-min-microvolt = <3000000>; 323 regulator-max-microvolt = <3312000>; 324 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 325 }; 326 327 vdda_qusb_hs0_3p1: 328 vreg_l24a_3p075: ldo24 { 329 regulator-min-microvolt = <3088000>; 330 regulator-max-microvolt = <3088000>; 331 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 332 }; 333 334 vreg_l25a_3p3: ldo25 { 335 regulator-min-microvolt = <3300000>; 336 regulator-max-microvolt = <3312000>; 337 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 338 }; 339 340 vdda_hp_pcie_1p2: 341 vdda_hv_ebi0: 342 vdda_hv_ebi1: 343 vdda_hv_ebi2: 344 vdda_hv_ebi3: 345 vdda_mipi_csi_1p25: 346 vdda_mipi_dsi0_1p2: 347 vdda_mipi_dsi1_1p2: 348 vdda_pcie_1p2: 349 vdda_ufs1_1p2: 350 vdda_ufs2_1p2: 351 vdda_usb1_ss_1p2: 352 vdda_usb2_ss_1p2: 353 vreg_l26a_1p2: ldo26 { 354 regulator-min-microvolt = <1200000>; 355 regulator-max-microvolt = <1200000>; 356 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 357 }; 358 359 vreg_l28a_3p0: ldo28 { 360 regulator-min-microvolt = <2856000>; 361 regulator-max-microvolt = <3008000>; 362 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 363 }; 364 365 vreg_lvs1a_1p8: lvs1 { 366 regulator-min-microvolt = <1800000>; 367 regulator-max-microvolt = <1800000>; 368 }; 369 370 vreg_lvs2a_1p8: lvs2 { 371 regulator-min-microvolt = <1800000>; 372 regulator-max-microvolt = <1800000>; 373 }; 374 }; 375 376 pmi8998-rpmh-regulators { 377 compatible = "qcom,pmi8998-rpmh-regulators"; 378 qcom,pmic-id = "b"; 379 380 vdd-bob-supply = <&vph_pwr>; 381 382 vreg_bob: bob { 383 regulator-min-microvolt = <3312000>; 384 regulator-max-microvolt = <3600000>; 385 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; 386 regulator-allow-bypass; 387 }; 388 }; 389 390 pm8005-rpmh-regulators { 391 compatible = "qcom,pm8005-rpmh-regulators"; 392 qcom,pmic-id = "c"; 393 394 vdd-s1-supply = <&vph_pwr>; 395 vdd-s2-supply = <&vph_pwr>; 396 vdd-s3-supply = <&vph_pwr>; 397 vdd-s4-supply = <&vph_pwr>; 398 399 vreg_s3c_0p6: smps3 { 400 regulator-min-microvolt = <600000>; 401 regulator-max-microvolt = <600000>; 402 }; 403 }; 404}; 405 406&cdsp_pas { 407 status = "okay"; 408 firmware-name = "qcom/sdm845/axolotl/cdsp.mbn"; 409}; 410 411&dsi0 { 412 status = "okay"; 413 vdda-supply = <&vdda_mipi_dsi0_1p2>; 414 415 panel@0 { 416 compatible = "visionox,rm69299-shift"; 417 status = "okay"; 418 reg = <0>; 419 vdda-supply = <&vreg_l14a_1p88>; 420 vdd3p3-supply = <&vreg_l28a_3p0>; 421 422 #address-cells = <1>; 423 #size-cells = <0>; 424 425 reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; 426 427 pinctrl-names = "default", "sleep"; 428 pinctrl-0 = <&sde_dsi_active &sde_te_active>; 429 pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>; 430 431 port { 432 panel_in_0: endpoint { 433 remote-endpoint = <&dsi0_out>; 434 }; 435 }; 436 }; 437}; 438 439&dsi0_out { 440 remote-endpoint = <&panel_in_0>; 441 data-lanes = <0 1 2 3>; 442}; 443 444&dsi0_phy { 445 status = "okay"; 446 vdds-supply = <&vdda_mipi_dsi0_pll>; 447}; 448 449&gcc { 450 protected-clocks = <GCC_QSPI_CORE_CLK>, 451 <GCC_QSPI_CORE_CLK_SRC>, 452 <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, 453 <GCC_LPASS_Q6_AXI_CLK>, 454 <GCC_LPASS_SWAY_CLK>; 455}; 456 457&gmu { 458 status = "okay"; 459}; 460 461&gpu { 462 status = "okay"; 463 464 zap-shader { 465 memory-region = <&gpu_mem>; 466 firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn"; 467 }; 468}; 469 470&i2c5 { 471 status="okay"; 472 473 touchscreen@38 { 474 compatible = "focaltech,fts8719"; 475 reg = <0x38>; 476 wakeup-source; 477 interrupt-parent = <&tlmm>; 478 interrupts = <125 0x2>; 479 vdd-supply = <&vreg_l28a_3p0>; 480 vcc-i2c-supply = <&vreg_l14a_1p88>; 481 482 pinctrl-names = "default", "suspend"; 483 pinctrl-0 = <&ts_int_active &ts_reset_active>; 484 pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; 485 486 reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>; 487 irq-gpio = <&tlmm 125 GPIO_TRANSITORY>; 488 touchscreen-size-x = <1080>; 489 touchscreen-size-y = <2160>; 490 focaltech,max-touch-number = <5>; 491 }; 492}; 493 494&ipa { 495 status = "okay"; 496 497 memory-region = <&ipa_fw_mem>; 498 firmware-name = "qcom/sdm845/axolotl/ipa_fws.mbn"; 499}; 500 501&mdss { 502 status = "okay"; 503}; 504 505&mss_pil { 506 status = "okay"; 507 firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn"; 508}; 509 510&pm8998_gpio { 511 volume_up_gpio: pm8998_gpio6 { 512 pinconf { 513 pins = "gpio6"; 514 function = "normal"; 515 input-enable; 516 bias-pull-up; 517 qcom,drive-strength = <0>; 518 }; 519 }; 520}; 521 522&pm8998_pon { 523 volume_down_resin: resin { 524 compatible = "qcom,pm8941-resin"; 525 interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; 526 debounce = <15625>; 527 bias-pull-up; 528 linux,code = <KEY_VOLUMEDOWN>; 529 }; 530}; 531 532&qup_uart9_default { 533 pinconf-rx { 534 pins = "gpio5"; 535 drive-strength = <2>; 536 bias-pull-up; 537 }; 538 539 pinconf-tx { 540 pins = "gpio4"; 541 drive-strength = <2>; 542 bias-disable; 543 }; 544}; 545 546&qupv3_id_0 { 547 status = "okay"; 548}; 549 550&qupv3_id_1 { 551 status = "okay"; 552}; 553 554&tlmm { 555 gpio-reserved-ranges = <0 4>, <81 4>; 556 557 sde_dsi_active: sde-dsi-active { 558 mux { 559 pins = "gpio6", "gpio11"; 560 function = "gpio"; 561 }; 562 563 config { 564 pins = "gpio6", "gpio11"; 565 drive-strength = <8>; 566 bias-disable; 567 }; 568 }; 569 570 sde_dsi_suspend: sde-dsi-suspend { 571 mux { 572 pins = "gpio6", "gpio11"; 573 function = "gpio"; 574 }; 575 576 config { 577 pins = "gpio6", "gpio11"; 578 drive-strength = <2>; 579 bias-pull-down; 580 }; 581 }; 582 583 sde_te_active: sde-te-active { 584 mux { 585 pins = "gpio10"; 586 function = "mdp_vsync"; 587 }; 588 589 config { 590 pins = "gpio10"; 591 drive-strength = <2>; 592 bias-pull-down; 593 }; 594 }; 595 596 sde_te_suspend: sde-te-suspend { 597 mux { 598 pins = "gpio10"; 599 function = "mdp_vsync"; 600 }; 601 602 config { 603 pins = "gpio10"; 604 drive-strength = <2>; 605 bias-pull-down; 606 }; 607 }; 608 609 ts_int_active: ts-int-active { 610 mux { 611 pins = "gpio125"; 612 function = "gpio"; 613 }; 614 615 config { 616 pins = "gpio125"; 617 drive-strength = <8>; 618 bias-pull-up; 619 input-enable; 620 }; 621 }; 622 623 ts_int_suspend: ts-int-suspend { 624 mux { 625 pins = "gpio125"; 626 function = "gpio"; 627 }; 628 629 config { 630 pins = "gpio125"; 631 drive-strength = <2>; 632 bias-pull-down; 633 input-enable; 634 }; 635 }; 636 637 ts_reset_active: ts-reset-active { 638 mux { 639 pins = "gpio99"; 640 function = "gpio"; 641 }; 642 643 config { 644 pins = "gpio99"; 645 drive-strength = <8>; 646 bias-pull-up; 647 }; 648 }; 649 650 ts_reset_suspend: ts-reset-suspend { 651 mux { 652 pins = "gpio99"; 653 function = "gpio"; 654 }; 655 656 config { 657 pins = "gpio99"; 658 drive-strength = <2>; 659 bias-pull-down; 660 }; 661 }; 662}; 663 664&uart6 { 665 status = "okay"; 666 667 bluetooth { 668 compatible = "qcom,wcn3990-bt"; 669 670 vddio-supply = <&vreg_s4a_1p8>; 671 vddxo-supply = <&vreg_l7a_1p8>; 672 vddrf-supply = <&vreg_l17a_1p3>; 673 vddch0-supply = <&vreg_l25a_3p3>; 674 max-speed = <3200000>; 675 }; 676}; 677 678&uart9 { 679 status = "okay"; 680}; 681 682&ufs_mem_hc { 683 status = "okay"; 684 685 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; 686 687 vcc-supply = <&vreg_l20a_2p95>; 688 vcc-max-microamp = <600000>; 689}; 690 691&ufs_mem_phy { 692 status = "okay"; 693 694 vdda-phy-supply = <&vdda_ufs1_core>; 695 vdda-pll-supply = <&vdda_ufs1_1p2>; 696}; 697 698&usb_1 { 699 status = "okay"; 700}; 701 702&usb_1_dwc3 { 703 dr_mode = "peripheral"; 704}; 705 706&usb_1_hsphy { 707 status = "okay"; 708 709 vdd-supply = <&vreg_l1a_0p875>; 710 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; 711 vdda-pll-supply = <&vreg_l12a_1p8>; 712}; 713 714&usb_1_qmpphy { 715 status = "okay"; 716 717 vdda-phy-supply = <&vreg_l26a_1p2>; 718 vdda-pll-supply = <&vreg_l1a_0p875>; 719}; 720 721&venus { 722 status = "okay"; 723 firmware-name = "qcom/sdm845/axolotl/venus.mbn"; 724}; 725 726&wifi { 727 status = "okay"; 728 729 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; 730 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; 731 vdd-1.8-xo-supply = <&vreg_l7a_1p8>; 732 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; 733 vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; 734 735 qcom,snoc-host-cap-8bit-quirk; 736};