sdm845-sony-xperia-tama.dtsi (10282B)
1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> 4 */ 5 6#include <dt-bindings/input/input.h> 7#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 8#include "sdm845.dtsi" 9#include "pm8005.dtsi" 10#include "pm8998.dtsi" 11#include "pmi8998.dtsi" 12 13/ { 14 qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */ 15 qcom,board-id = <8 0>; 16 17 gpio-keys { 18 compatible = "gpio-keys"; 19 20 /* Neither Camera Focus, nor Camera Shutter seem to work... */ 21 22 vol-down { 23 label = "volume_down"; 24 gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; 25 linux,code = <KEY_VOLUMEDOWN>; 26 debounce-interval = <15>; 27 gpio-key,wakeup; 28 }; 29 }; 30 31 vph_pwr: vph-pwr-regulator { 32 compatible = "regulator-fixed"; 33 regulator-name = "vph_pwr"; 34 regulator-min-microvolt = <3700000>; 35 regulator-max-microvolt = <3700000>; 36 }; 37 38 vreg_s4a_1p8: pm8998-smps4 { 39 compatible = "regulator-fixed"; 40 regulator-name = "vreg_s4a_1p8"; 41 42 regulator-min-microvolt = <1800000>; 43 regulator-max-microvolt = <1800000>; 44 45 regulator-always-on; 46 regulator-boot-on; 47 48 vin-supply = <&vph_pwr>; 49 }; 50 51 reserved-memory { 52 /* SONY was cool and didn't diverge from MTP this time, yay! */ 53 cont_splash_mem: memory@9d400000 { 54 reg = <0x0 0x9d400000 0x0 0x2400000>; 55 no-map; 56 }; 57 58 ramoops@ffc00000 { 59 compatible = "ramoops"; 60 reg = <0x0 0xffc00000 0x0 0x100000>; 61 record-size = <0x10000>; 62 console-size = <0x60000>; 63 ftrace-size = <0x10000>; 64 pmsg-size = <0x20000>; 65 ecc-size = <16>; 66 no-map; 67 }; 68 }; 69}; 70 71&apps_rsc { 72 pm8998-rpmh-regulators { 73 compatible = "qcom,pm8998-rpmh-regulators"; 74 qcom,pmic-id = "a"; 75 76 vdd-s1-supply = <&vph_pwr>; 77 vdd-s2-supply = <&vph_pwr>; 78 vdd-s3-supply = <&vph_pwr>; 79 vdd-s4-supply = <&vph_pwr>; 80 vdd-s5-supply = <&vph_pwr>; 81 vdd-s6-supply = <&vph_pwr>; 82 vdd-s7-supply = <&vph_pwr>; 83 vdd-s8-supply = <&vph_pwr>; 84 vdd-s9-supply = <&vph_pwr>; 85 vdd-s10-supply = <&vph_pwr>; 86 vdd-s11-supply = <&vph_pwr>; 87 vdd-s12-supply = <&vph_pwr>; 88 vdd-s13-supply = <&vph_pwr>; 89 vdd-l1-l27-supply = <&vreg_s7a_0p9>; 90 vdd-l2-l8-l17-supply = <&vreg_s3a_1p3>; 91 vdd-l3-l11-supply = <&vreg_s7a_0p9>; 92 vdd-l4-l5-supply = <&vreg_s7a_0p9>; 93 vdd-l6-supply = <&vph_pwr>; 94 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; 95 vdd-l9-supply = <&vreg_s5a_1p9>; 96 vdd-l10-l23-l25-supply = <&src_vreg_bob>; 97 vdd-l13-l19-l21-supply = <&src_vreg_bob>; 98 vdd-l16-l28-supply = <&src_vreg_bob>; 99 vdd-l18-l22-supply = <&src_vreg_bob>; 100 vdd-l20-l24-supply = <&src_vreg_bob>; 101 vdd-l26-supply = <&vreg_s3a_1p3>; 102 vin-lvs-1-2-supply = <&vreg_s4a_1p8>; 103 104 vreg_s2a_1p1: smps2 { 105 regulator-min-microvolt = <1100000>; 106 regulator-max-microvolt = <1100000>; 107 }; 108 109 vreg_s3a_1p3: smps3 { 110 regulator-min-microvolt = <1352000>; 111 regulator-max-microvolt = <1352000>; 112 }; 113 114 vreg_s5a_1p9: smps5 { 115 regulator-min-microvolt = <1904000>; 116 regulator-max-microvolt = <2040000>; 117 }; 118 119 vreg_s7a_0p9: smps7 { 120 regulator-min-microvolt = <900000>; 121 regulator-max-microvolt = <1028000>; 122 }; 123 124 vreg_l1a_0p9: ldo1 { 125 regulator-min-microvolt = <880000>; 126 regulator-max-microvolt = <880000>; 127 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 128 }; 129 130 vreg_l2a_1p2: ldo2 { 131 regulator-min-microvolt = <1200000>; 132 regulator-max-microvolt = <1200000>; 133 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 134 regulator-always-on; 135 }; 136 137 vreg_l3a_1p0: ldo3 { 138 regulator-min-microvolt = <1000000>; 139 regulator-max-microvolt = <1000000>; 140 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 141 }; 142 143 vreg_l5a_0p8: ldo5 { 144 regulator-min-microvolt = <800000>; 145 regulator-max-microvolt = <800000>; 146 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 147 }; 148 149 vreg_l6a_1p8: ldo6 { 150 regulator-min-microvolt = <1856000>; 151 regulator-max-microvolt = <1856000>; 152 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 153 }; 154 155 vreg_l7a_1p8: ldo7 { 156 regulator-min-microvolt = <1800000>; 157 regulator-max-microvolt = <1800000>; 158 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 159 }; 160 161 vreg_l8a_1p2: ldo8 { 162 regulator-min-microvolt = <1200000>; 163 regulator-max-microvolt = <1248000>; 164 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 165 }; 166 167 vreg_l9a_1p7: ldo9 { 168 regulator-min-microvolt = <1704000>; 169 regulator-max-microvolt = <2928000>; 170 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 171 }; 172 173 vreg_l10a_1p7: ldo10 { 174 regulator-min-microvolt = <1704000>; 175 regulator-max-microvolt = <2928000>; 176 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 177 }; 178 179 vreg_l11a_1p0: ldo11 { 180 regulator-min-microvolt = <1000000>; 181 regulator-max-microvolt = <1048000>; 182 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 183 }; 184 185 vreg_l12a_1p8: ldo12 { 186 regulator-min-microvolt = <1800000>; 187 regulator-max-microvolt = <1800000>; 188 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 189 }; 190 191 vreg_l13a_1p8: ldo13 { 192 regulator-min-microvolt = <1800000>; 193 regulator-max-microvolt = <2960000>; 194 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 195 }; 196 197 vreg_l14a_1p8: ldo14 { 198 regulator-min-microvolt = <1800000>; 199 regulator-max-microvolt = <1800000>; 200 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 201 }; 202 203 vreg_l15a_1p8: ldo15 { 204 regulator-min-microvolt = <1800000>; 205 regulator-max-microvolt = <1800000>; 206 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 207 }; 208 209 vreg_l16a_2p7: ldo16 { 210 regulator-min-microvolt = <2704000>; 211 regulator-max-microvolt = <2704000>; 212 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 213 }; 214 215 vreg_l17a_1p3: ldo17 { 216 regulator-min-microvolt = <1304000>; 217 regulator-max-microvolt = <1304000>; 218 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 219 }; 220 221 vreg_l18a_2p7: ldo18 { 222 regulator-min-microvolt = <2704000>; 223 regulator-max-microvolt = <2960000>; 224 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 225 }; 226 227 vreg_l19a_2p7: ldo19 { 228 regulator-min-microvolt = <2700000>; 229 regulator-max-microvolt = <2700000>; 230 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 231 232 /* 233 * The driver *really* doesn't want this regualtor to exist, 234 * saying that it could not get the current voltage (-ENOTRECOVERABLE) 235 * even though it surely is used on these devices (as a voltage 236 * source for camera autofocus) 237 */ 238 status = "disabled"; 239 }; 240 241 vreg_l20a_2p7: ldo20 { 242 regulator-min-microvolt = <2704000>; 243 regulator-max-microvolt = <2960000>; 244 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 245 }; 246 247 vreg_l21a_2p7: ldo21 { 248 regulator-min-microvolt = <2704000>; 249 regulator-max-microvolt = <2960000>; 250 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 251 }; 252 253 vreg_l22a_2p8: ldo22 { 254 regulator-min-microvolt = <2800000>; 255 regulator-max-microvolt = <2800000>; 256 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 257 }; 258 259 vreg_l23a_3p0: ldo23 { 260 regulator-min-microvolt = <3000000>; 261 regulator-max-microvolt = <3312000>; 262 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 263 }; 264 265 vreg_l24a_3p1: ldo24 { 266 regulator-min-microvolt = <3088000>; 267 regulator-max-microvolt = <3088000>; 268 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 269 }; 270 271 vreg_l25a_3p0: ldo25 { 272 regulator-min-microvolt = <3000000>; 273 regulator-max-microvolt = <3312000>; 274 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 275 }; 276 277 vreg_l26a_1p2: ldo26 { 278 regulator-min-microvolt = <1200000>; 279 regulator-max-microvolt = <1200000>; 280 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 281 }; 282 283 vreg_l28a_2p8: ldo28 { 284 regulator-min-microvolt = <2856000>; 285 regulator-max-microvolt = <3008000>; 286 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 287 }; 288 289 vreg_lvs1a_1p8: lvs1 { 290 regulator-min-microvolt = <1800000>; 291 regulator-max-microvolt = <1800000>; 292 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 293 }; 294 295 vreg_lvs2a_1p8: lvs2 { 296 regulator-min-microvolt = <1800000>; 297 regulator-max-microvolt = <1800000>; 298 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 299 }; 300 }; 301 302 pmi8998-rpmh-regulators { 303 compatible = "qcom,pmi8998-rpmh-regulators"; 304 qcom,pmic-id = "b"; 305 306 src_vreg_bob: bob { 307 regulator-min-microvolt = <3312000>; 308 regulator-max-microvolt = <3600000>; 309 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 310 }; 311 }; 312 313 pm8005-rpmh-regulators { 314 compatible = "qcom,pm8005-rpmh-regulators"; 315 qcom,pmic-id = "c"; 316 317 vdd-s1-supply = <&vph_pwr>; 318 vdd-s2-supply = <&vph_pwr>; 319 vdd-s3-supply = <&vph_pwr>; 320 vdd-s4-supply = <&vph_pwr>; 321 322 vreg_s3c_0p6: smps3 { 323 regulator-min-microvolt = <600000>; 324 regulator-max-microvolt = <600000>; 325 }; 326 }; 327}; 328 329&gcc { 330 protected-clocks = <GCC_QSPI_CORE_CLK>, 331 <GCC_QSPI_CORE_CLK_SRC>, 332 <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, 333 <GCC_LPASS_Q6_AXI_CLK>, 334 <GCC_LPASS_SWAY_CLK>; 335}; 336 337&i2c5 { 338 status = "okay"; 339 clock-frequency = <400000>; 340 341 /* Synaptics touchscreen @ 2c, 3c */ 342}; 343 344&i2c10 { 345 status = "okay"; 346 clock-frequency = <400000>; 347 348 /* Qcom SMB1355 @ 8, c */ 349 /* NXP PN547 NFC @ 28 */ 350 /* Renesas IDTP9221 Qi charger @ 61 */ 351}; 352 353&i2c14 { 354 status = "okay"; 355 clock-frequency = <400000>; 356 357 /* SONY ToF sensor @ 52 */ 358 /* AMS TCS3490 RGB+IR color sensor @ 72 */ 359}; 360 361&qupv3_id_0 { 362 status = "okay"; 363}; 364 365&qupv3_id_1 { 366 status = "okay"; 367}; 368 369&sdhc_2 { 370 status = "okay"; 371 372 vmmc-supply = <&vreg_l21a_2p7>; 373 vqmmc-supply = <&vreg_l13a_1p8>; 374 cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; 375 pinctrl-0 = <&sdc2_default_state>; 376 pinctrl-names = "default"; 377 bus-width = <4>; 378 no-sdio; 379 no-emmc; 380}; 381 382&tlmm { 383 gpio-reserved-ranges = <0 4>, <81 4>; 384 385 sdc2_default_state: sdc2-default-state { 386 clk { 387 pins = "sdc2_clk"; 388 drive-strength = <16>; 389 bias-disable; 390 }; 391 392 cmd { 393 pins = "sdc2_cmd"; 394 drive-strength = <10>; 395 bias-pull-up; 396 }; 397 398 data { 399 pins = "sdc2_data"; 400 drive-strength = <10>; 401 bias-pull-up; 402 }; 403 }; 404}; 405 406&uart6 { 407 status = "okay"; 408}; 409 410&uart9 { 411 status = "okay"; 412}; 413 414/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ 415&ufs_mem_hc { status = "disabled"; }; 416&ufs_mem_phy { status = "disabled"; }; 417 418&usb_1 { 419 status = "okay"; 420 421 qcom,select-utmi-as-pipe-clk; 422}; 423 424&usb_1_dwc3 { 425 dr_mode = "peripheral"; 426 427 maximum-speed = "high-speed"; 428 phys = <&usb_1_hsphy>; 429 phy-names = "usb2-phy"; 430}; 431 432&usb_1_hsphy { 433 status = "okay"; 434 435 vdd-supply = <&vreg_l1a_0p9>; 436 vdda-pll-supply = <&vreg_l12a_1p8>; 437 vdda-phy-dpdm-supply = <&vreg_l24a_3p1>; 438};