sm8350.dtsi (86508B)
1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2020, Linaro Limited 4 */ 5 6#include <dt-bindings/interrupt-controller/arm-gic.h> 7#include <dt-bindings/clock/qcom,gcc-sm8350.h> 8#include <dt-bindings/clock/qcom,rpmh.h> 9#include <dt-bindings/dma/qcom-gpi.h> 10#include <dt-bindings/gpio/gpio.h> 11#include <dt-bindings/interconnect/qcom,sm8350.h> 12#include <dt-bindings/mailbox/qcom-ipcc.h> 13#include <dt-bindings/power/qcom-rpmpd.h> 14#include <dt-bindings/soc/qcom,rpmh-rsc.h> 15#include <dt-bindings/thermal/thermal.h> 16#include <dt-bindings/interconnect/qcom,sm8350.h> 17 18/ { 19 interrupt-parent = <&intc>; 20 21 #address-cells = <2>; 22 #size-cells = <2>; 23 24 chosen { }; 25 26 clocks { 27 xo_board: xo-board { 28 compatible = "fixed-clock"; 29 #clock-cells = <0>; 30 clock-frequency = <38400000>; 31 clock-output-names = "xo_board"; 32 }; 33 34 sleep_clk: sleep-clk { 35 compatible = "fixed-clock"; 36 clock-frequency = <32000>; 37 #clock-cells = <0>; 38 }; 39 40 ufs_phy_rx_symbol_0_clk: ufs-phy-rx-symbol-0 { 41 compatible = "fixed-clock"; 42 clock-frequency = <1000>; 43 #clock-cells = <0>; 44 }; 45 46 ufs_phy_rx_symbol_1_clk: ufs-phy-rx-symbol-1 { 47 compatible = "fixed-clock"; 48 clock-frequency = <1000>; 49 #clock-cells = <0>; 50 }; 51 52 ufs_phy_tx_symbol_0_clk: ufs-phy-tx-symbol-0 { 53 compatible = "fixed-clock"; 54 clock-frequency = <1000>; 55 #clock-cells = <0>; 56 }; 57 }; 58 59 cpus { 60 #address-cells = <2>; 61 #size-cells = <0>; 62 63 CPU0: cpu@0 { 64 device_type = "cpu"; 65 compatible = "qcom,kryo685"; 66 reg = <0x0 0x0>; 67 enable-method = "psci"; 68 next-level-cache = <&L2_0>; 69 qcom,freq-domain = <&cpufreq_hw 0>; 70 power-domains = <&CPU_PD0>; 71 power-domain-names = "psci"; 72 #cooling-cells = <2>; 73 L2_0: l2-cache { 74 compatible = "cache"; 75 next-level-cache = <&L3_0>; 76 L3_0: l3-cache { 77 compatible = "cache"; 78 }; 79 }; 80 }; 81 82 CPU1: cpu@100 { 83 device_type = "cpu"; 84 compatible = "qcom,kryo685"; 85 reg = <0x0 0x100>; 86 enable-method = "psci"; 87 next-level-cache = <&L2_100>; 88 qcom,freq-domain = <&cpufreq_hw 0>; 89 power-domains = <&CPU_PD1>; 90 power-domain-names = "psci"; 91 #cooling-cells = <2>; 92 L2_100: l2-cache { 93 compatible = "cache"; 94 next-level-cache = <&L3_0>; 95 }; 96 }; 97 98 CPU2: cpu@200 { 99 device_type = "cpu"; 100 compatible = "qcom,kryo685"; 101 reg = <0x0 0x200>; 102 enable-method = "psci"; 103 next-level-cache = <&L2_200>; 104 qcom,freq-domain = <&cpufreq_hw 0>; 105 power-domains = <&CPU_PD2>; 106 power-domain-names = "psci"; 107 #cooling-cells = <2>; 108 L2_200: l2-cache { 109 compatible = "cache"; 110 next-level-cache = <&L3_0>; 111 }; 112 }; 113 114 CPU3: cpu@300 { 115 device_type = "cpu"; 116 compatible = "qcom,kryo685"; 117 reg = <0x0 0x300>; 118 enable-method = "psci"; 119 next-level-cache = <&L2_300>; 120 qcom,freq-domain = <&cpufreq_hw 0>; 121 power-domains = <&CPU_PD3>; 122 power-domain-names = "psci"; 123 #cooling-cells = <2>; 124 L2_300: l2-cache { 125 compatible = "cache"; 126 next-level-cache = <&L3_0>; 127 }; 128 }; 129 130 CPU4: cpu@400 { 131 device_type = "cpu"; 132 compatible = "qcom,kryo685"; 133 reg = <0x0 0x400>; 134 enable-method = "psci"; 135 next-level-cache = <&L2_400>; 136 qcom,freq-domain = <&cpufreq_hw 1>; 137 power-domains = <&CPU_PD4>; 138 power-domain-names = "psci"; 139 #cooling-cells = <2>; 140 L2_400: l2-cache { 141 compatible = "cache"; 142 next-level-cache = <&L3_0>; 143 }; 144 }; 145 146 CPU5: cpu@500 { 147 device_type = "cpu"; 148 compatible = "qcom,kryo685"; 149 reg = <0x0 0x500>; 150 enable-method = "psci"; 151 next-level-cache = <&L2_500>; 152 qcom,freq-domain = <&cpufreq_hw 1>; 153 power-domains = <&CPU_PD5>; 154 power-domain-names = "psci"; 155 #cooling-cells = <2>; 156 L2_500: l2-cache { 157 compatible = "cache"; 158 next-level-cache = <&L3_0>; 159 }; 160 161 }; 162 163 CPU6: cpu@600 { 164 device_type = "cpu"; 165 compatible = "qcom,kryo685"; 166 reg = <0x0 0x600>; 167 enable-method = "psci"; 168 next-level-cache = <&L2_600>; 169 qcom,freq-domain = <&cpufreq_hw 1>; 170 power-domains = <&CPU_PD6>; 171 power-domain-names = "psci"; 172 #cooling-cells = <2>; 173 L2_600: l2-cache { 174 compatible = "cache"; 175 next-level-cache = <&L3_0>; 176 }; 177 }; 178 179 CPU7: cpu@700 { 180 device_type = "cpu"; 181 compatible = "qcom,kryo685"; 182 reg = <0x0 0x700>; 183 enable-method = "psci"; 184 next-level-cache = <&L2_700>; 185 qcom,freq-domain = <&cpufreq_hw 2>; 186 power-domains = <&CPU_PD7>; 187 power-domain-names = "psci"; 188 #cooling-cells = <2>; 189 L2_700: l2-cache { 190 compatible = "cache"; 191 next-level-cache = <&L3_0>; 192 }; 193 }; 194 195 cpu-map { 196 cluster0 { 197 core0 { 198 cpu = <&CPU0>; 199 }; 200 201 core1 { 202 cpu = <&CPU1>; 203 }; 204 205 core2 { 206 cpu = <&CPU2>; 207 }; 208 209 core3 { 210 cpu = <&CPU3>; 211 }; 212 213 core4 { 214 cpu = <&CPU4>; 215 }; 216 217 core5 { 218 cpu = <&CPU5>; 219 }; 220 221 core6 { 222 cpu = <&CPU6>; 223 }; 224 225 core7 { 226 cpu = <&CPU7>; 227 }; 228 }; 229 }; 230 231 idle-states { 232 entry-method = "psci"; 233 234 LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { 235 compatible = "arm,idle-state"; 236 idle-state-name = "silver-rail-power-collapse"; 237 arm,psci-suspend-param = <0x40000004>; 238 entry-latency-us = <355>; 239 exit-latency-us = <909>; 240 min-residency-us = <3934>; 241 local-timer-stop; 242 }; 243 244 BIG_CPU_SLEEP_0: cpu-sleep-1-0 { 245 compatible = "arm,idle-state"; 246 idle-state-name = "gold-rail-power-collapse"; 247 arm,psci-suspend-param = <0x40000004>; 248 entry-latency-us = <241>; 249 exit-latency-us = <1461>; 250 min-residency-us = <4488>; 251 local-timer-stop; 252 }; 253 }; 254 255 domain-idle-states { 256 CLUSTER_SLEEP_0: cluster-sleep-0 { 257 compatible = "domain-idle-state"; 258 idle-state-name = "cluster-power-collapse"; 259 arm,psci-suspend-param = <0x4100c344>; 260 entry-latency-us = <3263>; 261 exit-latency-us = <6562>; 262 min-residency-us = <9987>; 263 local-timer-stop; 264 }; 265 }; 266 }; 267 268 firmware { 269 scm: scm { 270 compatible = "qcom,scm-sm8350", "qcom,scm"; 271 #reset-cells = <1>; 272 }; 273 }; 274 275 memory@80000000 { 276 device_type = "memory"; 277 /* We expect the bootloader to fill in the size */ 278 reg = <0x0 0x80000000 0x0 0x0>; 279 }; 280 281 pmu { 282 compatible = "arm,armv8-pmuv3"; 283 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; 284 }; 285 286 psci { 287 compatible = "arm,psci-1.0"; 288 method = "smc"; 289 290 CPU_PD0: cpu0 { 291 #power-domain-cells = <0>; 292 power-domains = <&CLUSTER_PD>; 293 domain-idle-states = <&LITTLE_CPU_SLEEP_0>; 294 }; 295 296 CPU_PD1: cpu1 { 297 #power-domain-cells = <0>; 298 power-domains = <&CLUSTER_PD>; 299 domain-idle-states = <&LITTLE_CPU_SLEEP_0>; 300 }; 301 302 CPU_PD2: cpu2 { 303 #power-domain-cells = <0>; 304 power-domains = <&CLUSTER_PD>; 305 domain-idle-states = <&LITTLE_CPU_SLEEP_0>; 306 }; 307 308 CPU_PD3: cpu3 { 309 #power-domain-cells = <0>; 310 power-domains = <&CLUSTER_PD>; 311 domain-idle-states = <&LITTLE_CPU_SLEEP_0>; 312 }; 313 314 CPU_PD4: cpu4 { 315 #power-domain-cells = <0>; 316 power-domains = <&CLUSTER_PD>; 317 domain-idle-states = <&BIG_CPU_SLEEP_0>; 318 }; 319 320 CPU_PD5: cpu5 { 321 #power-domain-cells = <0>; 322 power-domains = <&CLUSTER_PD>; 323 domain-idle-states = <&BIG_CPU_SLEEP_0>; 324 }; 325 326 CPU_PD6: cpu6 { 327 #power-domain-cells = <0>; 328 power-domains = <&CLUSTER_PD>; 329 domain-idle-states = <&BIG_CPU_SLEEP_0>; 330 }; 331 332 CPU_PD7: cpu7 { 333 #power-domain-cells = <0>; 334 power-domains = <&CLUSTER_PD>; 335 domain-idle-states = <&BIG_CPU_SLEEP_0>; 336 }; 337 338 CLUSTER_PD: cpu-cluster0 { 339 #power-domain-cells = <0>; 340 domain-idle-states = <&CLUSTER_SLEEP_0>; 341 }; 342 }; 343 344 reserved_memory: reserved-memory { 345 #address-cells = <2>; 346 #size-cells = <2>; 347 ranges; 348 349 hyp_mem: memory@80000000 { 350 reg = <0x0 0x80000000 0x0 0x600000>; 351 no-map; 352 }; 353 354 xbl_aop_mem: memory@80700000 { 355 no-map; 356 reg = <0x0 0x80700000 0x0 0x160000>; 357 }; 358 359 cmd_db: memory@80860000 { 360 compatible = "qcom,cmd-db"; 361 reg = <0x0 0x80860000 0x0 0x20000>; 362 no-map; 363 }; 364 365 reserved_xbl_uefi_log: memory@80880000 { 366 reg = <0x0 0x80880000 0x0 0x14000>; 367 no-map; 368 }; 369 370 smem_mem: memory@80900000 { 371 reg = <0x0 0x80900000 0x0 0x200000>; 372 no-map; 373 }; 374 375 cpucp_fw_mem: memory@80b00000 { 376 reg = <0x0 0x80b00000 0x0 0x100000>; 377 no-map; 378 }; 379 380 cdsp_secure_heap: memory@80c00000 { 381 reg = <0x0 0x80c00000 0x0 0x4600000>; 382 no-map; 383 }; 384 385 pil_camera_mem: mmeory@85200000 { 386 reg = <0x0 0x85200000 0x0 0x500000>; 387 no-map; 388 }; 389 390 pil_video_mem: memory@85700000 { 391 reg = <0x0 0x85700000 0x0 0x500000>; 392 no-map; 393 }; 394 395 pil_cvp_mem: memory@85c00000 { 396 reg = <0x0 0x85c00000 0x0 0x500000>; 397 no-map; 398 }; 399 400 pil_adsp_mem: memory@86100000 { 401 reg = <0x0 0x86100000 0x0 0x2100000>; 402 no-map; 403 }; 404 405 pil_slpi_mem: memory@88200000 { 406 reg = <0x0 0x88200000 0x0 0x1500000>; 407 no-map; 408 }; 409 410 pil_cdsp_mem: memory@89700000 { 411 reg = <0x0 0x89700000 0x0 0x1e00000>; 412 no-map; 413 }; 414 415 pil_ipa_fw_mem: memory@8b500000 { 416 reg = <0x0 0x8b500000 0x0 0x10000>; 417 no-map; 418 }; 419 420 pil_ipa_gsi_mem: memory@8b510000 { 421 reg = <0x0 0x8b510000 0x0 0xa000>; 422 no-map; 423 }; 424 425 pil_gpu_mem: memory@8b51a000 { 426 reg = <0x0 0x8b51a000 0x0 0x2000>; 427 no-map; 428 }; 429 430 pil_spss_mem: memory@8b600000 { 431 reg = <0x0 0x8b600000 0x0 0x100000>; 432 no-map; 433 }; 434 435 pil_modem_mem: memory@8b800000 { 436 reg = <0x0 0x8b800000 0x0 0x10000000>; 437 no-map; 438 }; 439 440 rmtfs_mem: memory@9b800000 { 441 compatible = "qcom,rmtfs-mem"; 442 reg = <0x0 0x9b800000 0x0 0x280000>; 443 no-map; 444 445 qcom,client-id = <1>; 446 qcom,vmid = <15>; 447 }; 448 449 hyp_reserved_mem: memory@d0000000 { 450 reg = <0x0 0xd0000000 0x0 0x800000>; 451 no-map; 452 }; 453 454 pil_trustedvm_mem: memory@d0800000 { 455 reg = <0x0 0xd0800000 0x0 0x76f7000>; 456 no-map; 457 }; 458 459 qrtr_shbuf: memory@d7ef7000 { 460 reg = <0x0 0xd7ef7000 0x0 0x9000>; 461 no-map; 462 }; 463 464 chan0_shbuf: memory@d7f00000 { 465 reg = <0x0 0xd7f00000 0x0 0x80000>; 466 no-map; 467 }; 468 469 chan1_shbuf: memory@d7f80000 { 470 reg = <0x0 0xd7f80000 0x0 0x80000>; 471 no-map; 472 }; 473 474 removed_mem: memory@d8800000 { 475 reg = <0x0 0xd8800000 0x0 0x6800000>; 476 no-map; 477 }; 478 }; 479 480 smem: qcom,smem { 481 compatible = "qcom,smem"; 482 memory-region = <&smem_mem>; 483 hwlocks = <&tcsr_mutex 3>; 484 }; 485 486 smp2p-adsp { 487 compatible = "qcom,smp2p"; 488 qcom,smem = <443>, <429>; 489 interrupts-extended = <&ipcc IPCC_CLIENT_LPASS 490 IPCC_MPROC_SIGNAL_SMP2P 491 IRQ_TYPE_EDGE_RISING>; 492 mboxes = <&ipcc IPCC_CLIENT_LPASS 493 IPCC_MPROC_SIGNAL_SMP2P>; 494 495 qcom,local-pid = <0>; 496 qcom,remote-pid = <2>; 497 498 smp2p_adsp_out: master-kernel { 499 qcom,entry-name = "master-kernel"; 500 #qcom,smem-state-cells = <1>; 501 }; 502 503 smp2p_adsp_in: slave-kernel { 504 qcom,entry-name = "slave-kernel"; 505 interrupt-controller; 506 #interrupt-cells = <2>; 507 }; 508 }; 509 510 smp2p-cdsp { 511 compatible = "qcom,smp2p"; 512 qcom,smem = <94>, <432>; 513 interrupts-extended = <&ipcc IPCC_CLIENT_CDSP 514 IPCC_MPROC_SIGNAL_SMP2P 515 IRQ_TYPE_EDGE_RISING>; 516 mboxes = <&ipcc IPCC_CLIENT_CDSP 517 IPCC_MPROC_SIGNAL_SMP2P>; 518 519 qcom,local-pid = <0>; 520 qcom,remote-pid = <5>; 521 522 smp2p_cdsp_out: master-kernel { 523 qcom,entry-name = "master-kernel"; 524 #qcom,smem-state-cells = <1>; 525 }; 526 527 smp2p_cdsp_in: slave-kernel { 528 qcom,entry-name = "slave-kernel"; 529 interrupt-controller; 530 #interrupt-cells = <2>; 531 }; 532 }; 533 534 smp2p-modem { 535 compatible = "qcom,smp2p"; 536 qcom,smem = <435>, <428>; 537 interrupts-extended = <&ipcc IPCC_CLIENT_MPSS 538 IPCC_MPROC_SIGNAL_SMP2P 539 IRQ_TYPE_EDGE_RISING>; 540 mboxes = <&ipcc IPCC_CLIENT_MPSS 541 IPCC_MPROC_SIGNAL_SMP2P>; 542 543 qcom,local-pid = <0>; 544 qcom,remote-pid = <1>; 545 546 smp2p_modem_out: master-kernel { 547 qcom,entry-name = "master-kernel"; 548 #qcom,smem-state-cells = <1>; 549 }; 550 551 smp2p_modem_in: slave-kernel { 552 qcom,entry-name = "slave-kernel"; 553 interrupt-controller; 554 #interrupt-cells = <2>; 555 }; 556 557 ipa_smp2p_out: ipa-ap-to-modem { 558 qcom,entry-name = "ipa"; 559 #qcom,smem-state-cells = <1>; 560 }; 561 562 ipa_smp2p_in: ipa-modem-to-ap { 563 qcom,entry-name = "ipa"; 564 interrupt-controller; 565 #interrupt-cells = <2>; 566 }; 567 }; 568 569 smp2p-slpi { 570 compatible = "qcom,smp2p"; 571 qcom,smem = <481>, <430>; 572 interrupts-extended = <&ipcc IPCC_CLIENT_SLPI 573 IPCC_MPROC_SIGNAL_SMP2P 574 IRQ_TYPE_EDGE_RISING>; 575 mboxes = <&ipcc IPCC_CLIENT_SLPI 576 IPCC_MPROC_SIGNAL_SMP2P>; 577 578 qcom,local-pid = <0>; 579 qcom,remote-pid = <3>; 580 581 smp2p_slpi_out: master-kernel { 582 qcom,entry-name = "master-kernel"; 583 #qcom,smem-state-cells = <1>; 584 }; 585 586 smp2p_slpi_in: slave-kernel { 587 qcom,entry-name = "slave-kernel"; 588 interrupt-controller; 589 #interrupt-cells = <2>; 590 }; 591 }; 592 593 soc: soc@0 { 594 #address-cells = <2>; 595 #size-cells = <2>; 596 ranges = <0 0 0 0 0x10 0>; 597 dma-ranges = <0 0 0 0 0x10 0>; 598 compatible = "simple-bus"; 599 600 gcc: clock-controller@100000 { 601 compatible = "qcom,gcc-sm8350"; 602 reg = <0x0 0x00100000 0x0 0x1f0000>; 603 #clock-cells = <1>; 604 #reset-cells = <1>; 605 #power-domain-cells = <1>; 606 clock-names = "bi_tcxo", 607 "sleep_clk", 608 "pcie_0_pipe_clk", 609 "pcie_1_pipe_clk", 610 "ufs_card_rx_symbol_0_clk", 611 "ufs_card_rx_symbol_1_clk", 612 "ufs_card_tx_symbol_0_clk", 613 "ufs_phy_rx_symbol_0_clk", 614 "ufs_phy_rx_symbol_1_clk", 615 "ufs_phy_tx_symbol_0_clk", 616 "usb3_phy_wrapper_gcc_usb30_pipe_clk", 617 "usb3_uni_phy_sec_gcc_usb30_pipe_clk"; 618 clocks = <&rpmhcc RPMH_CXO_CLK>, 619 <&sleep_clk>, 620 <0>, 621 <0>, 622 <0>, 623 <0>, 624 <0>, 625 <&ufs_phy_rx_symbol_0_clk>, 626 <&ufs_phy_rx_symbol_1_clk>, 627 <&ufs_phy_tx_symbol_0_clk>, 628 <0>, 629 <0>; 630 }; 631 632 ipcc: mailbox@408000 { 633 compatible = "qcom,sm8350-ipcc", "qcom,ipcc"; 634 reg = <0 0x00408000 0 0x1000>; 635 interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; 636 interrupt-controller; 637 #interrupt-cells = <3>; 638 #mbox-cells = <2>; 639 }; 640 641 qup_opp_table_100mhz: qup-100mhz-opp-table { 642 compatible = "operating-points-v2"; 643 644 opp-50000000 { 645 opp-hz = /bits/ 64 <50000000>; 646 required-opps = <&rpmhpd_opp_min_svs>; 647 }; 648 649 opp-75000000 { 650 opp-hz = /bits/ 64 <75000000>; 651 required-opps = <&rpmhpd_opp_low_svs>; 652 }; 653 654 opp-100000000 { 655 opp-hz = /bits/ 64 <100000000>; 656 required-opps = <&rpmhpd_opp_svs>; 657 }; 658 }; 659 660 qup_opp_table_120mhz: qup-120mhz-opp-table { 661 compatible = "operating-points-v2"; 662 663 opp-50000000 { 664 opp-hz = /bits/ 64 <50000000>; 665 required-opps = <&rpmhpd_opp_min_svs>; 666 }; 667 668 opp-75000000 { 669 opp-hz = /bits/ 64 <75000000>; 670 required-opps = <&rpmhpd_opp_low_svs>; 671 }; 672 673 opp-120000000 { 674 opp-hz = /bits/ 64 <120000000>; 675 required-opps = <&rpmhpd_opp_svs>; 676 }; 677 }; 678 679 gpi_dma2: dma-controller@800000 { 680 compatible = "qcom,sm8350-gpi-dma"; 681 reg = <0 0x00800000 0 0x60000>; 682 interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, 683 <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, 684 <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, 685 <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, 686 <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, 687 <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, 688 <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, 689 <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, 690 <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, 691 <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, 692 <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, 693 <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>; 694 dma-channels = <12>; 695 dma-channel-mask = <0xff>; 696 iommus = <&apps_smmu 0x5f6 0x0>; 697 #dma-cells = <3>; 698 status = "disabled"; 699 }; 700 701 qupv3_id_2: geniqup@8c0000 { 702 compatible = "qcom,geni-se-qup"; 703 reg = <0x0 0x008c0000 0x0 0x6000>; 704 clock-names = "m-ahb", "s-ahb"; 705 clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, 706 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; 707 iommus = <&apps_smmu 0x5e3 0x0>; 708 #address-cells = <2>; 709 #size-cells = <2>; 710 ranges; 711 status = "disabled"; 712 713 i2c14: i2c@880000 { 714 compatible = "qcom,geni-i2c"; 715 reg = <0 0x00880000 0 0x4000>; 716 clock-names = "se"; 717 clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; 718 pinctrl-names = "default"; 719 pinctrl-0 = <&qup_i2c14_default>; 720 interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; 721 dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, 722 <&gpi_dma2 1 0 QCOM_GPI_I2C>; 723 dma-names = "tx", "rx"; 724 #address-cells = <1>; 725 #size-cells = <0>; 726 status = "disabled"; 727 }; 728 729 spi14: spi@880000 { 730 compatible = "qcom,geni-spi"; 731 reg = <0 0x00880000 0 0x4000>; 732 clock-names = "se"; 733 clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; 734 interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; 735 power-domains = <&rpmhpd SM8350_CX>; 736 operating-points-v2 = <&qup_opp_table_120mhz>; 737 dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, 738 <&gpi_dma2 1 0 QCOM_GPI_SPI>; 739 dma-names = "tx", "rx"; 740 #address-cells = <1>; 741 #size-cells = <0>; 742 status = "disabled"; 743 }; 744 745 i2c15: i2c@884000 { 746 compatible = "qcom,geni-i2c"; 747 reg = <0 0x00884000 0 0x4000>; 748 clock-names = "se"; 749 clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; 750 pinctrl-names = "default"; 751 pinctrl-0 = <&qup_i2c15_default>; 752 interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; 753 dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, 754 <&gpi_dma2 1 1 QCOM_GPI_I2C>; 755 dma-names = "tx", "rx"; 756 #address-cells = <1>; 757 #size-cells = <0>; 758 status = "disabled"; 759 }; 760 761 spi15: spi@884000 { 762 compatible = "qcom,geni-spi"; 763 reg = <0 0x00884000 0 0x4000>; 764 clock-names = "se"; 765 clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; 766 interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; 767 power-domains = <&rpmhpd SM8350_CX>; 768 operating-points-v2 = <&qup_opp_table_120mhz>; 769 dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, 770 <&gpi_dma2 1 1 QCOM_GPI_SPI>; 771 dma-names = "tx", "rx"; 772 #address-cells = <1>; 773 #size-cells = <0>; 774 status = "disabled"; 775 }; 776 777 i2c16: i2c@888000 { 778 compatible = "qcom,geni-i2c"; 779 reg = <0 0x00888000 0 0x4000>; 780 clock-names = "se"; 781 clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; 782 pinctrl-names = "default"; 783 pinctrl-0 = <&qup_i2c16_default>; 784 interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; 785 dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, 786 <&gpi_dma2 1 2 QCOM_GPI_I2C>; 787 dma-names = "tx", "rx"; 788 #address-cells = <1>; 789 #size-cells = <0>; 790 status = "disabled"; 791 }; 792 793 spi16: spi@888000 { 794 compatible = "qcom,geni-spi"; 795 reg = <0 0x00888000 0 0x4000>; 796 clock-names = "se"; 797 clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; 798 interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; 799 power-domains = <&rpmhpd SM8350_CX>; 800 operating-points-v2 = <&qup_opp_table_100mhz>; 801 dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, 802 <&gpi_dma2 1 2 QCOM_GPI_SPI>; 803 dma-names = "tx", "rx"; 804 #address-cells = <1>; 805 #size-cells = <0>; 806 status = "disabled"; 807 }; 808 809 i2c17: i2c@88c000 { 810 compatible = "qcom,geni-i2c"; 811 reg = <0 0x0088c000 0 0x4000>; 812 clock-names = "se"; 813 clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; 814 pinctrl-names = "default"; 815 pinctrl-0 = <&qup_i2c17_default>; 816 interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; 817 dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, 818 <&gpi_dma2 1 3 QCOM_GPI_I2C>; 819 dma-names = "tx", "rx"; 820 #address-cells = <1>; 821 #size-cells = <0>; 822 status = "disabled"; 823 }; 824 825 spi17: spi@88c000 { 826 compatible = "qcom,geni-spi"; 827 reg = <0 0x0088c000 0 0x4000>; 828 clock-names = "se"; 829 clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; 830 interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; 831 power-domains = <&rpmhpd SM8350_CX>; 832 operating-points-v2 = <&qup_opp_table_100mhz>; 833 dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, 834 <&gpi_dma2 1 3 QCOM_GPI_SPI>; 835 dma-names = "tx", "rx"; 836 #address-cells = <1>; 837 #size-cells = <0>; 838 status = "disabled"; 839 }; 840 841 /* QUP no. 18 seems to be strictly SPI/UART-only */ 842 843 spi18: spi@890000 { 844 compatible = "qcom,geni-spi"; 845 reg = <0 0x00890000 0 0x4000>; 846 clock-names = "se"; 847 clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; 848 interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; 849 power-domains = <&rpmhpd SM8350_CX>; 850 operating-points-v2 = <&qup_opp_table_100mhz>; 851 dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, 852 <&gpi_dma2 1 4 QCOM_GPI_SPI>; 853 dma-names = "tx", "rx"; 854 #address-cells = <1>; 855 #size-cells = <0>; 856 status = "disabled"; 857 }; 858 859 uart18: serial@890000 { 860 compatible = "qcom,geni-uart"; 861 reg = <0 0x00890000 0 0x4000>; 862 clock-names = "se"; 863 clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; 864 pinctrl-names = "default"; 865 pinctrl-0 = <&qup_uart18_default>; 866 interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; 867 power-domains = <&rpmhpd SM8350_CX>; 868 operating-points-v2 = <&qup_opp_table_100mhz>; 869 status = "disabled"; 870 }; 871 872 i2c19: i2c@894000 { 873 compatible = "qcom,geni-i2c"; 874 reg = <0 0x00894000 0 0x4000>; 875 clock-names = "se"; 876 clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; 877 pinctrl-names = "default"; 878 pinctrl-0 = <&qup_i2c19_default>; 879 interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; 880 dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, 881 <&gpi_dma2 1 5 QCOM_GPI_I2C>; 882 dma-names = "tx", "rx"; 883 #address-cells = <1>; 884 #size-cells = <0>; 885 status = "disabled"; 886 }; 887 888 spi19: spi@894000 { 889 compatible = "qcom,geni-spi"; 890 reg = <0 0x00894000 0 0x4000>; 891 clock-names = "se"; 892 clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; 893 interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; 894 power-domains = <&rpmhpd SM8350_CX>; 895 operating-points-v2 = <&qup_opp_table_100mhz>; 896 dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, 897 <&gpi_dma2 1 5 QCOM_GPI_SPI>; 898 dma-names = "tx", "rx"; 899 #address-cells = <1>; 900 #size-cells = <0>; 901 status = "disabled"; 902 }; 903 }; 904 905 gpi_dma0: dma-controller@900000 { 906 compatible = "qcom,sm8350-gpi-dma"; 907 reg = <0 0x09800000 0 0x60000>; 908 interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, 909 <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, 910 <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, 911 <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, 912 <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, 913 <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, 914 <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, 915 <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, 916 <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, 917 <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, 918 <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, 919 <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; 920 dma-channels = <12>; 921 dma-channel-mask = <0x7e>; 922 iommus = <&apps_smmu 0x5b6 0x0>; 923 #dma-cells = <3>; 924 status = "disabled"; 925 }; 926 927 qupv3_id_0: geniqup@9c0000 { 928 compatible = "qcom,geni-se-qup"; 929 reg = <0x0 0x009c0000 0x0 0x6000>; 930 clock-names = "m-ahb", "s-ahb"; 931 clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, 932 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; 933 iommus = <&apps_smmu 0x5a3 0>; 934 #address-cells = <2>; 935 #size-cells = <2>; 936 ranges; 937 status = "disabled"; 938 939 i2c0: i2c@980000 { 940 compatible = "qcom,geni-i2c"; 941 reg = <0 0x00980000 0 0x4000>; 942 clock-names = "se"; 943 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; 944 pinctrl-names = "default"; 945 pinctrl-0 = <&qup_i2c0_default>; 946 interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; 947 dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, 948 <&gpi_dma0 1 0 QCOM_GPI_I2C>; 949 dma-names = "tx", "rx"; 950 #address-cells = <1>; 951 #size-cells = <0>; 952 status = "disabled"; 953 }; 954 955 spi0: spi@980000 { 956 compatible = "qcom,geni-spi"; 957 reg = <0 0x00980000 0 0x4000>; 958 clock-names = "se"; 959 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; 960 interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; 961 power-domains = <&rpmhpd SM8350_CX>; 962 operating-points-v2 = <&qup_opp_table_100mhz>; 963 dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, 964 <&gpi_dma0 1 0 QCOM_GPI_SPI>; 965 dma-names = "tx", "rx"; 966 #address-cells = <1>; 967 #size-cells = <0>; 968 status = "disabled"; 969 }; 970 971 i2c1: i2c@984000 { 972 compatible = "qcom,geni-i2c"; 973 reg = <0 0x00984000 0 0x4000>; 974 clock-names = "se"; 975 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; 976 pinctrl-names = "default"; 977 pinctrl-0 = <&qup_i2c1_default>; 978 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; 979 dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, 980 <&gpi_dma0 1 1 QCOM_GPI_I2C>; 981 dma-names = "tx", "rx"; 982 #address-cells = <1>; 983 #size-cells = <0>; 984 status = "disabled"; 985 }; 986 987 spi1: spi@984000 { 988 compatible = "qcom,geni-spi"; 989 reg = <0 0x00984000 0 0x4000>; 990 clock-names = "se"; 991 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; 992 interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; 993 power-domains = <&rpmhpd SM8350_CX>; 994 operating-points-v2 = <&qup_opp_table_100mhz>; 995 dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, 996 <&gpi_dma0 1 1 QCOM_GPI_SPI>; 997 dma-names = "tx", "rx"; 998 #address-cells = <1>; 999 #size-cells = <0>; 1000 status = "disabled"; 1001 }; 1002 1003 i2c2: i2c@988000 { 1004 compatible = "qcom,geni-i2c"; 1005 reg = <0 0x00988000 0 0x4000>; 1006 clock-names = "se"; 1007 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; 1008 pinctrl-names = "default"; 1009 pinctrl-0 = <&qup_i2c2_default>; 1010 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; 1011 dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, 1012 <&gpi_dma0 1 2 QCOM_GPI_I2C>; 1013 dma-names = "tx", "rx"; 1014 #address-cells = <1>; 1015 #size-cells = <0>; 1016 status = "disabled"; 1017 }; 1018 1019 spi2: spi@988000 { 1020 compatible = "qcom,geni-spi"; 1021 reg = <0 0x00988000 0 0x4000>; 1022 clock-names = "se"; 1023 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; 1024 interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; 1025 power-domains = <&rpmhpd SM8350_CX>; 1026 operating-points-v2 = <&qup_opp_table_100mhz>; 1027 dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, 1028 <&gpi_dma0 1 2 QCOM_GPI_SPI>; 1029 dma-names = "tx", "rx"; 1030 #address-cells = <1>; 1031 #size-cells = <0>; 1032 status = "disabled"; 1033 }; 1034 1035 uart2: serial@98c000 { 1036 compatible = "qcom,geni-debug-uart"; 1037 reg = <0 0x0098c000 0 0x4000>; 1038 clock-names = "se"; 1039 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; 1040 pinctrl-names = "default"; 1041 pinctrl-0 = <&qup_uart3_default_state>; 1042 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; 1043 power-domains = <&rpmhpd SM8350_CX>; 1044 operating-points-v2 = <&qup_opp_table_100mhz>; 1045 #address-cells = <1>; 1046 #size-cells = <0>; 1047 status = "disabled"; 1048 }; 1049 1050 /* QUP no. 3 seems to be strictly SPI-only */ 1051 1052 spi3: spi@98c000 { 1053 compatible = "qcom,geni-spi"; 1054 reg = <0 0x0098c000 0 0x4000>; 1055 clock-names = "se"; 1056 clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; 1057 interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; 1058 power-domains = <&rpmhpd SM8350_CX>; 1059 operating-points-v2 = <&qup_opp_table_100mhz>; 1060 dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, 1061 <&gpi_dma0 1 3 QCOM_GPI_SPI>; 1062 dma-names = "tx", "rx"; 1063 #address-cells = <1>; 1064 #size-cells = <0>; 1065 status = "disabled"; 1066 }; 1067 1068 i2c4: i2c@990000 { 1069 compatible = "qcom,geni-i2c"; 1070 reg = <0 0x00990000 0 0x4000>; 1071 clock-names = "se"; 1072 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; 1073 pinctrl-names = "default"; 1074 pinctrl-0 = <&qup_i2c4_default>; 1075 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; 1076 dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, 1077 <&gpi_dma0 1 4 QCOM_GPI_I2C>; 1078 dma-names = "tx", "rx"; 1079 #address-cells = <1>; 1080 #size-cells = <0>; 1081 status = "disabled"; 1082 }; 1083 1084 spi4: spi@990000 { 1085 compatible = "qcom,geni-spi"; 1086 reg = <0 0x00990000 0 0x4000>; 1087 clock-names = "se"; 1088 clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; 1089 interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; 1090 power-domains = <&rpmhpd SM8350_CX>; 1091 operating-points-v2 = <&qup_opp_table_100mhz>; 1092 dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, 1093 <&gpi_dma0 1 4 QCOM_GPI_SPI>; 1094 dma-names = "tx", "rx"; 1095 #address-cells = <1>; 1096 #size-cells = <0>; 1097 status = "disabled"; 1098 }; 1099 1100 i2c5: i2c@994000 { 1101 compatible = "qcom,geni-i2c"; 1102 reg = <0 0x00994000 0 0x4000>; 1103 clock-names = "se"; 1104 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; 1105 pinctrl-names = "default"; 1106 pinctrl-0 = <&qup_i2c5_default>; 1107 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; 1108 dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, 1109 <&gpi_dma0 1 5 QCOM_GPI_I2C>; 1110 dma-names = "tx", "rx"; 1111 #address-cells = <1>; 1112 #size-cells = <0>; 1113 status = "disabled"; 1114 }; 1115 1116 spi5: spi@994000 { 1117 compatible = "qcom,geni-spi"; 1118 reg = <0 0x00994000 0 0x4000>; 1119 clock-names = "se"; 1120 clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; 1121 interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; 1122 power-domains = <&rpmhpd SM8350_CX>; 1123 operating-points-v2 = <&qup_opp_table_100mhz>; 1124 dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, 1125 <&gpi_dma0 1 5 QCOM_GPI_SPI>; 1126 dma-names = "tx", "rx"; 1127 #address-cells = <1>; 1128 #size-cells = <0>; 1129 status = "disabled"; 1130 }; 1131 1132 i2c6: i2c@998000 { 1133 compatible = "qcom,geni-i2c"; 1134 reg = <0 0x00998000 0 0x4000>; 1135 clock-names = "se"; 1136 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; 1137 pinctrl-names = "default"; 1138 pinctrl-0 = <&qup_i2c6_default>; 1139 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; 1140 dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, 1141 <&gpi_dma0 1 6 QCOM_GPI_I2C>; 1142 dma-names = "tx", "rx"; 1143 #address-cells = <1>; 1144 #size-cells = <0>; 1145 status = "disabled"; 1146 }; 1147 1148 spi6: spi@998000 { 1149 compatible = "qcom,geni-spi"; 1150 reg = <0 0x00998000 0 0x4000>; 1151 clock-names = "se"; 1152 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; 1153 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; 1154 power-domains = <&rpmhpd SM8350_CX>; 1155 operating-points-v2 = <&qup_opp_table_100mhz>; 1156 dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, 1157 <&gpi_dma0 1 6 QCOM_GPI_SPI>; 1158 dma-names = "tx", "rx"; 1159 #address-cells = <1>; 1160 #size-cells = <0>; 1161 status = "disabled"; 1162 }; 1163 1164 uart6: serial@998000 { 1165 compatible = "qcom,geni-uart"; 1166 reg = <0 0x00998000 0 0x4000>; 1167 clock-names = "se"; 1168 clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; 1169 pinctrl-names = "default"; 1170 pinctrl-0 = <&qup_uart6_default>; 1171 interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; 1172 power-domains = <&rpmhpd SM8350_CX>; 1173 operating-points-v2 = <&qup_opp_table_100mhz>; 1174 status = "disabled"; 1175 }; 1176 1177 i2c7: i2c@99c000 { 1178 compatible = "qcom,geni-i2c"; 1179 reg = <0 0x0099c000 0 0x4000>; 1180 clock-names = "se"; 1181 clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; 1182 pinctrl-names = "default"; 1183 pinctrl-0 = <&qup_i2c7_default>; 1184 interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; 1185 dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, 1186 <&gpi_dma0 1 7 QCOM_GPI_I2C>; 1187 dma-names = "tx", "rx"; 1188 #address-cells = <1>; 1189 #size-cells = <0>; 1190 status = "disabled"; 1191 }; 1192 1193 spi7: spi@99c000 { 1194 compatible = "qcom,geni-spi"; 1195 reg = <0 0x0099c000 0 0x4000>; 1196 clock-names = "se"; 1197 clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; 1198 interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; 1199 power-domains = <&rpmhpd SM8350_CX>; 1200 operating-points-v2 = <&qup_opp_table_100mhz>; 1201 dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, 1202 <&gpi_dma0 1 7 QCOM_GPI_SPI>; 1203 dma-names = "tx", "rx"; 1204 #address-cells = <1>; 1205 #size-cells = <0>; 1206 status = "disabled"; 1207 }; 1208 }; 1209 1210 gpi_dma1: dma-controller@a00000 { 1211 compatible = "qcom,sm8350-gpi-dma"; 1212 reg = <0 0x00a00000 0 0x60000>; 1213 interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, 1214 <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, 1215 <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, 1216 <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, 1217 <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, 1218 <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, 1219 <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, 1220 <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, 1221 <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, 1222 <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, 1223 <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, 1224 <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; 1225 dma-channels = <12>; 1226 dma-channel-mask = <0xff>; 1227 iommus = <&apps_smmu 0x56 0x0>; 1228 #dma-cells = <3>; 1229 status = "disabled"; 1230 }; 1231 1232 qupv3_id_1: geniqup@ac0000 { 1233 compatible = "qcom,geni-se-qup"; 1234 reg = <0x0 0x00ac0000 0x0 0x6000>; 1235 clock-names = "m-ahb", "s-ahb"; 1236 clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, 1237 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; 1238 iommus = <&apps_smmu 0x43 0>; 1239 #address-cells = <2>; 1240 #size-cells = <2>; 1241 ranges; 1242 status = "disabled"; 1243 1244 i2c8: i2c@a80000 { 1245 compatible = "qcom,geni-i2c"; 1246 reg = <0 0x00a80000 0 0x4000>; 1247 clock-names = "se"; 1248 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; 1249 pinctrl-names = "default"; 1250 pinctrl-0 = <&qup_i2c8_default>; 1251 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; 1252 dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, 1253 <&gpi_dma1 1 0 QCOM_GPI_I2C>; 1254 dma-names = "tx", "rx"; 1255 #address-cells = <1>; 1256 #size-cells = <0>; 1257 status = "disabled"; 1258 }; 1259 1260 spi8: spi@a80000 { 1261 compatible = "qcom,geni-spi"; 1262 reg = <0 0x00a80000 0 0x4000>; 1263 clock-names = "se"; 1264 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; 1265 interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; 1266 power-domains = <&rpmhpd SM8350_CX>; 1267 operating-points-v2 = <&qup_opp_table_120mhz>; 1268 dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, 1269 <&gpi_dma1 1 0 QCOM_GPI_SPI>; 1270 dma-names = "tx", "rx"; 1271 #address-cells = <1>; 1272 #size-cells = <0>; 1273 status = "disabled"; 1274 }; 1275 1276 i2c9: i2c@a84000 { 1277 compatible = "qcom,geni-i2c"; 1278 reg = <0 0x00a84000 0 0x4000>; 1279 clock-names = "se"; 1280 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; 1281 pinctrl-names = "default"; 1282 pinctrl-0 = <&qup_i2c9_default>; 1283 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; 1284 dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, 1285 <&gpi_dma1 1 1 QCOM_GPI_I2C>; 1286 dma-names = "tx", "rx"; 1287 #address-cells = <1>; 1288 #size-cells = <0>; 1289 status = "disabled"; 1290 }; 1291 1292 spi9: spi@a84000 { 1293 compatible = "qcom,geni-spi"; 1294 reg = <0 0x00a84000 0 0x4000>; 1295 clock-names = "se"; 1296 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; 1297 interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; 1298 power-domains = <&rpmhpd SM8350_CX>; 1299 operating-points-v2 = <&qup_opp_table_100mhz>; 1300 dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, 1301 <&gpi_dma1 1 1 QCOM_GPI_SPI>; 1302 dma-names = "tx", "rx"; 1303 #address-cells = <1>; 1304 #size-cells = <0>; 1305 status = "disabled"; 1306 }; 1307 1308 i2c10: i2c@a88000 { 1309 compatible = "qcom,geni-i2c"; 1310 reg = <0 0x00a88000 0 0x4000>; 1311 clock-names = "se"; 1312 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; 1313 pinctrl-names = "default"; 1314 pinctrl-0 = <&qup_i2c10_default>; 1315 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; 1316 dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, 1317 <&gpi_dma1 1 2 QCOM_GPI_I2C>; 1318 dma-names = "tx", "rx"; 1319 #address-cells = <1>; 1320 #size-cells = <0>; 1321 status = "disabled"; 1322 }; 1323 1324 spi10: spi@a88000 { 1325 compatible = "qcom,geni-spi"; 1326 reg = <0 0x00a88000 0 0x4000>; 1327 clock-names = "se"; 1328 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; 1329 interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; 1330 power-domains = <&rpmhpd SM8350_CX>; 1331 operating-points-v2 = <&qup_opp_table_100mhz>; 1332 dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, 1333 <&gpi_dma1 1 2 QCOM_GPI_SPI>; 1334 dma-names = "tx", "rx"; 1335 #address-cells = <1>; 1336 #size-cells = <0>; 1337 status = "disabled"; 1338 }; 1339 1340 i2c11: i2c@a8c000 { 1341 compatible = "qcom,geni-i2c"; 1342 reg = <0 0x00a8c000 0 0x4000>; 1343 clock-names = "se"; 1344 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; 1345 pinctrl-names = "default"; 1346 pinctrl-0 = <&qup_i2c11_default>; 1347 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; 1348 dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, 1349 <&gpi_dma1 1 3 QCOM_GPI_I2C>; 1350 dma-names = "tx", "rx"; 1351 #address-cells = <1>; 1352 #size-cells = <0>; 1353 status = "disabled"; 1354 }; 1355 1356 spi11: spi@a8c000 { 1357 compatible = "qcom,geni-spi"; 1358 reg = <0 0x00a8c000 0 0x4000>; 1359 clock-names = "se"; 1360 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; 1361 interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; 1362 power-domains = <&rpmhpd SM8350_CX>; 1363 operating-points-v2 = <&qup_opp_table_100mhz>; 1364 dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, 1365 <&gpi_dma1 1 3 QCOM_GPI_SPI>; 1366 dma-names = "tx", "rx"; 1367 #address-cells = <1>; 1368 #size-cells = <0>; 1369 status = "disabled"; 1370 }; 1371 1372 i2c12: i2c@a90000 { 1373 compatible = "qcom,geni-i2c"; 1374 reg = <0 0x00a90000 0 0x4000>; 1375 clock-names = "se"; 1376 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; 1377 pinctrl-names = "default"; 1378 pinctrl-0 = <&qup_i2c12_default>; 1379 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; 1380 dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, 1381 <&gpi_dma1 1 4 QCOM_GPI_I2C>; 1382 dma-names = "tx", "rx"; 1383 #address-cells = <1>; 1384 #size-cells = <0>; 1385 status = "disabled"; 1386 }; 1387 1388 spi12: spi@a90000 { 1389 compatible = "qcom,geni-spi"; 1390 reg = <0 0x00a90000 0 0x4000>; 1391 clock-names = "se"; 1392 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; 1393 interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; 1394 power-domains = <&rpmhpd SM8350_CX>; 1395 operating-points-v2 = <&qup_opp_table_100mhz>; 1396 dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, 1397 <&gpi_dma1 1 4 QCOM_GPI_SPI>; 1398 dma-names = "tx", "rx"; 1399 #address-cells = <1>; 1400 #size-cells = <0>; 1401 status = "disabled"; 1402 }; 1403 1404 i2c13: i2c@a94000 { 1405 compatible = "qcom,geni-i2c"; 1406 reg = <0 0x00a94000 0 0x4000>; 1407 clock-names = "se"; 1408 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; 1409 pinctrl-names = "default"; 1410 pinctrl-0 = <&qup_i2c13_default>; 1411 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; 1412 dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, 1413 <&gpi_dma1 1 5 QCOM_GPI_I2C>; 1414 dma-names = "tx", "rx"; 1415 #address-cells = <1>; 1416 #size-cells = <0>; 1417 status = "disabled"; 1418 }; 1419 1420 spi13: spi@a94000 { 1421 compatible = "qcom,geni-spi"; 1422 reg = <0 0x00a94000 0 0x4000>; 1423 clock-names = "se"; 1424 clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; 1425 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; 1426 power-domains = <&rpmhpd SM8350_CX>; 1427 operating-points-v2 = <&qup_opp_table_100mhz>; 1428 dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, 1429 <&gpi_dma1 1 5 QCOM_GPI_SPI>; 1430 dma-names = "tx", "rx"; 1431 #address-cells = <1>; 1432 #size-cells = <0>; 1433 status = "disabled"; 1434 }; 1435 }; 1436 1437 apps_smmu: iommu@15000000 { 1438 compatible = "qcom,sm8350-smmu-500", "arm,mmu-500"; 1439 reg = <0 0x15000000 0 0x100000>; 1440 #iommu-cells = <2>; 1441 #global-interrupts = <2>; 1442 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, 1443 <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, 1444 <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, 1445 <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, 1446 <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, 1447 <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, 1448 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, 1449 <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, 1450 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, 1451 <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, 1452 <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, 1453 <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, 1454 <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, 1455 <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, 1456 <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, 1457 <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, 1458 <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, 1459 <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, 1460 <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, 1461 <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, 1462 <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, 1463 <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, 1464 <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, 1465 <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, 1466 <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, 1467 <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, 1468 <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, 1469 <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, 1470 <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, 1471 <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, 1472 <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, 1473 <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, 1474 <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, 1475 <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, 1476 <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, 1477 <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, 1478 <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, 1479 <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, 1480 <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, 1481 <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, 1482 <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, 1483 <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, 1484 <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, 1485 <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, 1486 <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, 1487 <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, 1488 <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, 1489 <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, 1490 <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, 1491 <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, 1492 <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, 1493 <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, 1494 <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, 1495 <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, 1496 <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, 1497 <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, 1498 <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, 1499 <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, 1500 <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, 1501 <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, 1502 <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, 1503 <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, 1504 <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, 1505 <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, 1506 <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, 1507 <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, 1508 <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, 1509 <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, 1510 <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, 1511 <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, 1512 <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, 1513 <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, 1514 <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, 1515 <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, 1516 <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, 1517 <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, 1518 <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, 1519 <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, 1520 <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, 1521 <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, 1522 <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, 1523 <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, 1524 <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, 1525 <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, 1526 <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, 1527 <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, 1528 <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, 1529 <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, 1530 <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, 1531 <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, 1532 <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, 1533 <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, 1534 <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, 1535 <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, 1536 <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, 1537 <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, 1538 <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>, 1539 <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>; 1540 }; 1541 1542 config_noc: interconnect@1500000 { 1543 compatible = "qcom,sm8350-config-noc"; 1544 reg = <0 0x01500000 0 0xa580>; 1545 #interconnect-cells = <1>; 1546 qcom,bcm-voters = <&apps_bcm_voter>; 1547 }; 1548 1549 mc_virt: interconnect@1580000 { 1550 compatible = "qcom,sm8350-mc-virt"; 1551 reg = <0 0x01580000 0 0x1000>; 1552 #interconnect-cells = <1>; 1553 qcom,bcm-voters = <&apps_bcm_voter>; 1554 }; 1555 1556 system_noc: interconnect@1680000 { 1557 compatible = "qcom,sm8350-system-noc"; 1558 reg = <0 0x01680000 0 0x1c200>; 1559 #interconnect-cells = <1>; 1560 qcom,bcm-voters = <&apps_bcm_voter>; 1561 }; 1562 1563 aggre1_noc: interconnect@16e0000 { 1564 compatible = "qcom,sm8350-aggre1-noc"; 1565 reg = <0 0x016e0000 0 0x1f180>; 1566 #interconnect-cells = <1>; 1567 qcom,bcm-voters = <&apps_bcm_voter>; 1568 }; 1569 1570 aggre2_noc: interconnect@1700000 { 1571 compatible = "qcom,sm8350-aggre2-noc"; 1572 reg = <0 0x01700000 0 0x33000>; 1573 #interconnect-cells = <1>; 1574 qcom,bcm-voters = <&apps_bcm_voter>; 1575 }; 1576 1577 mmss_noc: interconnect@1740000 { 1578 compatible = "qcom,sm8350-mmss-noc"; 1579 reg = <0 0x01740000 0 0x1f080>; 1580 #interconnect-cells = <1>; 1581 qcom,bcm-voters = <&apps_bcm_voter>; 1582 }; 1583 1584 lpass_ag_noc: interconnect@3c40000 { 1585 compatible = "qcom,sm8350-lpass-ag-noc"; 1586 reg = <0 0x03c40000 0 0xf080>; 1587 #interconnect-cells = <1>; 1588 qcom,bcm-voters = <&apps_bcm_voter>; 1589 }; 1590 1591 compute_noc: interconnect@a0c0000{ 1592 compatible = "qcom,sm8350-compute-noc"; 1593 reg = <0 0x0a0c0000 0 0xa180>; 1594 #interconnect-cells = <1>; 1595 qcom,bcm-voters = <&apps_bcm_voter>; 1596 }; 1597 1598 ipa: ipa@1e40000 { 1599 compatible = "qcom,sm8350-ipa"; 1600 1601 iommus = <&apps_smmu 0x5c0 0x0>, 1602 <&apps_smmu 0x5c2 0x0>; 1603 reg = <0 0x1e40000 0 0x8000>, 1604 <0 0x1e50000 0 0x4b20>, 1605 <0 0x1e04000 0 0x23000>; 1606 reg-names = "ipa-reg", 1607 "ipa-shared", 1608 "gsi"; 1609 1610 interrupts-extended = <&intc GIC_SPI 655 IRQ_TYPE_EDGE_RISING>, 1611 <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, 1612 <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 1613 <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; 1614 interrupt-names = "ipa", 1615 "gsi", 1616 "ipa-clock-query", 1617 "ipa-setup-ready"; 1618 1619 clocks = <&rpmhcc RPMH_IPA_CLK>; 1620 clock-names = "core"; 1621 1622 interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>, 1623 <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>; 1624 interconnect-names = "memory", 1625 "config"; 1626 1627 qcom,qmp = <&aoss_qmp>; 1628 1629 qcom,smem-states = <&ipa_smp2p_out 0>, 1630 <&ipa_smp2p_out 1>; 1631 qcom,smem-state-names = "ipa-clock-enabled-valid", 1632 "ipa-clock-enabled"; 1633 1634 status = "disabled"; 1635 }; 1636 1637 tcsr_mutex: hwlock@1f40000 { 1638 compatible = "qcom,tcsr-mutex"; 1639 reg = <0x0 0x01f40000 0x0 0x40000>; 1640 #hwlock-cells = <1>; 1641 }; 1642 1643 mpss: remoteproc@4080000 { 1644 compatible = "qcom,sm8350-mpss-pas"; 1645 reg = <0x0 0x04080000 0x0 0x4040>; 1646 1647 interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, 1648 <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, 1649 <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, 1650 <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, 1651 <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, 1652 <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; 1653 interrupt-names = "wdog", "fatal", "ready", "handover", 1654 "stop-ack", "shutdown-ack"; 1655 1656 clocks = <&rpmhcc RPMH_CXO_CLK>; 1657 clock-names = "xo"; 1658 1659 power-domains = <&rpmhpd 0>, 1660 <&rpmhpd 12>; 1661 power-domain-names = "cx", "mss"; 1662 1663 interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>; 1664 1665 memory-region = <&pil_modem_mem>; 1666 1667 qcom,qmp = <&aoss_qmp>; 1668 1669 qcom,smem-states = <&smp2p_modem_out 0>; 1670 qcom,smem-state-names = "stop"; 1671 1672 status = "disabled"; 1673 1674 glink-edge { 1675 interrupts-extended = <&ipcc IPCC_CLIENT_MPSS 1676 IPCC_MPROC_SIGNAL_GLINK_QMP 1677 IRQ_TYPE_EDGE_RISING>; 1678 mboxes = <&ipcc IPCC_CLIENT_MPSS 1679 IPCC_MPROC_SIGNAL_GLINK_QMP>; 1680 interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; 1681 label = "modem"; 1682 qcom,remote-pid = <1>; 1683 }; 1684 }; 1685 1686 pdc: interrupt-controller@b220000 { 1687 compatible = "qcom,sm8350-pdc", "qcom,pdc"; 1688 reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>; 1689 qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, <55 306 4>, 1690 <59 312 3>, <62 374 2>, <64 434 2>, <66 438 3>, 1691 <69 86 1>, <70 520 54>, <124 609 31>, <155 63 1>, 1692 <156 716 12>; 1693 #interrupt-cells = <2>; 1694 interrupt-parent = <&intc>; 1695 interrupt-controller; 1696 }; 1697 1698 tsens0: thermal-sensor@c263000 { 1699 compatible = "qcom,sm8350-tsens", "qcom,tsens-v2"; 1700 reg = <0 0x0c263000 0 0x1ff>, /* TM */ 1701 <0 0x0c222000 0 0x8>; /* SROT */ 1702 #qcom,sensors = <15>; 1703 interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, 1704 <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; 1705 interrupt-names = "uplow", "critical"; 1706 #thermal-sensor-cells = <1>; 1707 }; 1708 1709 tsens1: thermal-sensor@c265000 { 1710 compatible = "qcom,sm8350-tsens", "qcom,tsens-v2"; 1711 reg = <0 0x0c265000 0 0x1ff>, /* TM */ 1712 <0 0x0c223000 0 0x8>; /* SROT */ 1713 #qcom,sensors = <14>; 1714 interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, 1715 <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; 1716 interrupt-names = "uplow", "critical"; 1717 #thermal-sensor-cells = <1>; 1718 }; 1719 1720 aoss_qmp: power-controller@c300000 { 1721 compatible = "qcom,sm8350-aoss-qmp"; 1722 reg = <0 0x0c300000 0 0x400>; 1723 interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP 1724 IRQ_TYPE_EDGE_RISING>; 1725 mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; 1726 1727 #clock-cells = <0>; 1728 }; 1729 1730 sram@c3f0000 { 1731 compatible = "qcom,rpmh-stats"; 1732 reg = <0 0x0c3f0000 0 0x400>; 1733 }; 1734 1735 spmi_bus: spmi@c440000 { 1736 compatible = "qcom,spmi-pmic-arb"; 1737 reg = <0x0 0xc440000 0x0 0x1100>, 1738 <0x0 0xc600000 0x0 0x2000000>, 1739 <0x0 0xe600000 0x0 0x100000>, 1740 <0x0 0xe700000 0x0 0xa0000>, 1741 <0x0 0xc40a000 0x0 0x26000>; 1742 reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; 1743 interrupt-names = "periph_irq"; 1744 interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; 1745 qcom,ee = <0>; 1746 qcom,channel = <0>; 1747 #address-cells = <2>; 1748 #size-cells = <0>; 1749 interrupt-controller; 1750 #interrupt-cells = <4>; 1751 }; 1752 1753 tlmm: pinctrl@f100000 { 1754 compatible = "qcom,sm8350-tlmm"; 1755 reg = <0 0x0f100000 0 0x300000>; 1756 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; 1757 gpio-controller; 1758 #gpio-cells = <2>; 1759 interrupt-controller; 1760 #interrupt-cells = <2>; 1761 gpio-ranges = <&tlmm 0 0 204>; 1762 wakeup-parent = <&pdc>; 1763 1764 qup_uart3_default_state: qup-uart3-default-state { 1765 rx { 1766 pins = "gpio18"; 1767 function = "qup3"; 1768 }; 1769 tx { 1770 pins = "gpio19"; 1771 function = "qup3"; 1772 }; 1773 }; 1774 1775 qup_uart6_default: qup-uart6-default { 1776 pins = "gpio30", "gpio31"; 1777 function = "qup6"; 1778 drive-strength = <2>; 1779 bias-disable; 1780 }; 1781 1782 qup_uart18_default: qup-uart18-default { 1783 pins = "gpio58", "gpio59"; 1784 function = "qup18"; 1785 drive-strength = <2>; 1786 bias-disable; 1787 }; 1788 1789 qup_i2c0_default: qup-i2c0-default { 1790 pins = "gpio4", "gpio5"; 1791 function = "qup0"; 1792 drive-strength = <2>; 1793 bias-pull-up; 1794 }; 1795 1796 qup_i2c1_default: qup-i2c1-default { 1797 pins = "gpio8", "gpio9"; 1798 function = "qup1"; 1799 drive-strength = <2>; 1800 bias-pull-up; 1801 }; 1802 1803 qup_i2c2_default: qup-i2c2-default { 1804 pins = "gpio12", "gpio13"; 1805 function = "qup2"; 1806 drive-strength = <2>; 1807 bias-pull-up; 1808 }; 1809 1810 qup_i2c4_default: qup-i2c4-default { 1811 pins = "gpio20", "gpio21"; 1812 function = "qup4"; 1813 drive-strength = <2>; 1814 bias-pull-up; 1815 }; 1816 1817 qup_i2c5_default: qup-i2c5-default { 1818 pins = "gpio24", "gpio25"; 1819 function = "qup5"; 1820 drive-strength = <2>; 1821 bias-pull-up; 1822 }; 1823 1824 qup_i2c6_default: qup-i2c6-default { 1825 pins = "gpio28", "gpio29"; 1826 function = "qup6"; 1827 drive-strength = <2>; 1828 bias-pull-up; 1829 }; 1830 1831 qup_i2c7_default: qup-i2c7-default { 1832 pins = "gpio32", "gpio33"; 1833 function = "qup7"; 1834 drive-strength = <2>; 1835 bias-disable; 1836 }; 1837 1838 qup_i2c8_default: qup-i2c8-default { 1839 pins = "gpio36", "gpio37"; 1840 function = "qup8"; 1841 drive-strength = <2>; 1842 bias-pull-up; 1843 }; 1844 1845 qup_i2c9_default: qup-i2c9-default { 1846 pins = "gpio40", "gpio41"; 1847 function = "qup9"; 1848 drive-strength = <2>; 1849 bias-pull-up; 1850 }; 1851 1852 qup_i2c10_default: qup-i2c10-default { 1853 pins = "gpio44", "gpio45"; 1854 function = "qup10"; 1855 drive-strength = <2>; 1856 bias-pull-up; 1857 }; 1858 1859 qup_i2c11_default: qup-i2c11-default { 1860 pins = "gpio48", "gpio49"; 1861 function = "qup11"; 1862 drive-strength = <2>; 1863 bias-pull-up; 1864 }; 1865 1866 qup_i2c12_default: qup-i2c12-default { 1867 pins = "gpio52", "gpio53"; 1868 function = "qup12"; 1869 drive-strength = <2>; 1870 bias-pull-up; 1871 }; 1872 1873 qup_i2c13_default: qup-i2c13-default { 1874 pins = "gpio0", "gpio1"; 1875 function = "qup13"; 1876 drive-strength = <2>; 1877 bias-pull-up; 1878 }; 1879 1880 qup_i2c14_default: qup-i2c14-default { 1881 pins = "gpio56", "gpio57"; 1882 function = "qup14"; 1883 drive-strength = <2>; 1884 bias-disable; 1885 }; 1886 1887 qup_i2c15_default: qup-i2c15-default { 1888 pins = "gpio60", "gpio61"; 1889 function = "qup15"; 1890 drive-strength = <2>; 1891 bias-disable; 1892 }; 1893 1894 qup_i2c16_default: qup-i2c16-default { 1895 pins = "gpio64", "gpio65"; 1896 function = "qup16"; 1897 drive-strength = <2>; 1898 bias-disable; 1899 }; 1900 1901 qup_i2c17_default: qup-i2c17-default { 1902 pins = "gpio72", "gpio73"; 1903 function = "qup17"; 1904 drive-strength = <2>; 1905 bias-disable; 1906 }; 1907 1908 qup_i2c19_default: qup-i2c19-default { 1909 pins = "gpio76", "gpio77"; 1910 function = "qup19"; 1911 drive-strength = <2>; 1912 bias-disable; 1913 }; 1914 }; 1915 1916 rng: rng@10d3000 { 1917 compatible = "qcom,prng-ee"; 1918 reg = <0 0x010d3000 0 0x1000>; 1919 clocks = <&rpmhcc RPMH_HWKM_CLK>; 1920 clock-names = "core"; 1921 }; 1922 1923 intc: interrupt-controller@17a00000 { 1924 compatible = "arm,gic-v3"; 1925 #interrupt-cells = <3>; 1926 interrupt-controller; 1927 #redistributor-regions = <1>; 1928 redistributor-stride = <0 0x20000>; 1929 reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ 1930 <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ 1931 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; 1932 }; 1933 1934 timer@17c20000 { 1935 compatible = "arm,armv7-timer-mem"; 1936 #address-cells = <2>; 1937 #size-cells = <2>; 1938 ranges; 1939 reg = <0x0 0x17c20000 0x0 0x1000>; 1940 clock-frequency = <19200000>; 1941 1942 frame@17c21000 { 1943 frame-number = <0>; 1944 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, 1945 <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; 1946 reg = <0x0 0x17c21000 0x0 0x1000>, 1947 <0x0 0x17c22000 0x0 0x1000>; 1948 }; 1949 1950 frame@17c23000 { 1951 frame-number = <1>; 1952 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; 1953 reg = <0x0 0x17c23000 0x0 0x1000>; 1954 status = "disabled"; 1955 }; 1956 1957 frame@17c25000 { 1958 frame-number = <2>; 1959 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 1960 reg = <0x0 0x17c25000 0x0 0x1000>; 1961 status = "disabled"; 1962 }; 1963 1964 frame@17c27000 { 1965 frame-number = <3>; 1966 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; 1967 reg = <0x0 0x17c27000 0x0 0x1000>; 1968 status = "disabled"; 1969 }; 1970 1971 frame@17c29000 { 1972 frame-number = <4>; 1973 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 1974 reg = <0x0 0x17c29000 0x0 0x1000>; 1975 status = "disabled"; 1976 }; 1977 1978 frame@17c2b000 { 1979 frame-number = <5>; 1980 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 1981 reg = <0x0 0x17c2b000 0x0 0x1000>; 1982 status = "disabled"; 1983 }; 1984 1985 frame@17c2d000 { 1986 frame-number = <6>; 1987 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 1988 reg = <0x0 0x17c2d000 0x0 0x1000>; 1989 status = "disabled"; 1990 }; 1991 }; 1992 1993 apps_rsc: rsc@18200000 { 1994 label = "apps_rsc"; 1995 compatible = "qcom,rpmh-rsc"; 1996 reg = <0x0 0x18200000 0x0 0x10000>, 1997 <0x0 0x18210000 0x0 0x10000>, 1998 <0x0 0x18220000 0x0 0x10000>; 1999 reg-names = "drv-0", "drv-1", "drv-2"; 2000 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, 2001 <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, 2002 <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; 2003 qcom,tcs-offset = <0xd00>; 2004 qcom,drv-id = <2>; 2005 qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, 2006 <WAKE_TCS 3>, <CONTROL_TCS 0>; 2007 2008 rpmhcc: clock-controller { 2009 compatible = "qcom,sm8350-rpmh-clk"; 2010 #clock-cells = <1>; 2011 clock-names = "xo"; 2012 clocks = <&xo_board>; 2013 }; 2014 2015 rpmhpd: power-controller { 2016 compatible = "qcom,sm8350-rpmhpd"; 2017 #power-domain-cells = <1>; 2018 operating-points-v2 = <&rpmhpd_opp_table>; 2019 2020 rpmhpd_opp_table: opp-table { 2021 compatible = "operating-points-v2"; 2022 2023 rpmhpd_opp_ret: opp1 { 2024 opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; 2025 }; 2026 2027 rpmhpd_opp_min_svs: opp2 { 2028 opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; 2029 }; 2030 2031 rpmhpd_opp_low_svs: opp3 { 2032 opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; 2033 }; 2034 2035 rpmhpd_opp_svs: opp4 { 2036 opp-level = <RPMH_REGULATOR_LEVEL_SVS>; 2037 }; 2038 2039 rpmhpd_opp_svs_l1: opp5 { 2040 opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; 2041 }; 2042 2043 rpmhpd_opp_nom: opp6 { 2044 opp-level = <RPMH_REGULATOR_LEVEL_NOM>; 2045 }; 2046 2047 rpmhpd_opp_nom_l1: opp7 { 2048 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; 2049 }; 2050 2051 rpmhpd_opp_nom_l2: opp8 { 2052 opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; 2053 }; 2054 2055 rpmhpd_opp_turbo: opp9 { 2056 opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; 2057 }; 2058 2059 rpmhpd_opp_turbo_l1: opp10 { 2060 opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; 2061 }; 2062 }; 2063 }; 2064 2065 apps_bcm_voter: bcm-voter { 2066 compatible = "qcom,bcm-voter"; 2067 }; 2068 }; 2069 2070 cpufreq_hw: cpufreq@18591000 { 2071 compatible = "qcom,sm8350-cpufreq-epss", "qcom,cpufreq-epss"; 2072 reg = <0 0x18591000 0 0x1000>, 2073 <0 0x18592000 0 0x1000>, 2074 <0 0x18593000 0 0x1000>; 2075 reg-names = "freq-domain0", "freq-domain1", "freq-domain2"; 2076 2077 clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; 2078 clock-names = "xo", "alternate"; 2079 2080 #freq-domain-cells = <1>; 2081 }; 2082 2083 ufs_mem_hc: ufshc@1d84000 { 2084 compatible = "qcom,sm8350-ufshc", "qcom,ufshc", 2085 "jedec,ufs-2.0"; 2086 reg = <0 0x01d84000 0 0x3000>; 2087 interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; 2088 phys = <&ufs_mem_phy_lanes>; 2089 phy-names = "ufsphy"; 2090 lanes-per-direction = <2>; 2091 #reset-cells = <1>; 2092 resets = <&gcc GCC_UFS_PHY_BCR>; 2093 reset-names = "rst"; 2094 2095 power-domains = <&gcc UFS_PHY_GDSC>; 2096 2097 iommus = <&apps_smmu 0xe0 0x0>; 2098 2099 clock-names = 2100 "core_clk", 2101 "bus_aggr_clk", 2102 "iface_clk", 2103 "core_clk_unipro", 2104 "ref_clk", 2105 "tx_lane0_sync_clk", 2106 "rx_lane0_sync_clk", 2107 "rx_lane1_sync_clk"; 2108 clocks = 2109 <&gcc GCC_UFS_PHY_AXI_CLK>, 2110 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, 2111 <&gcc GCC_UFS_PHY_AHB_CLK>, 2112 <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, 2113 <&rpmhcc RPMH_CXO_CLK>, 2114 <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, 2115 <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, 2116 <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; 2117 freq-table-hz = 2118 <75000000 300000000>, 2119 <0 0>, 2120 <0 0>, 2121 <75000000 300000000>, 2122 <0 0>, 2123 <0 0>, 2124 <0 0>, 2125 <0 0>; 2126 status = "disabled"; 2127 }; 2128 2129 ufs_mem_phy: phy@1d87000 { 2130 compatible = "qcom,sm8350-qmp-ufs-phy"; 2131 reg = <0 0x01d87000 0 0xe10>; 2132 #address-cells = <2>; 2133 #size-cells = <2>; 2134 ranges; 2135 clock-names = "ref", 2136 "ref_aux"; 2137 clocks = <&rpmhcc RPMH_CXO_CLK>, 2138 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; 2139 2140 resets = <&ufs_mem_hc 0>; 2141 reset-names = "ufsphy"; 2142 status = "disabled"; 2143 2144 ufs_mem_phy_lanes: phy@1d87400 { 2145 reg = <0 0x01d87400 0 0x108>, 2146 <0 0x01d87600 0 0x1e0>, 2147 <0 0x01d87c00 0 0x1dc>, 2148 <0 0x01d87800 0 0x108>, 2149 <0 0x01d87a00 0 0x1e0>; 2150 #phy-cells = <0>; 2151 #clock-cells = <0>; 2152 }; 2153 }; 2154 2155 slpi: remoteproc@5c00000 { 2156 compatible = "qcom,sm8350-slpi-pas"; 2157 reg = <0 0x05c00000 0 0x4000>; 2158 2159 interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, 2160 <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, 2161 <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, 2162 <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, 2163 <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; 2164 interrupt-names = "wdog", "fatal", "ready", 2165 "handover", "stop-ack"; 2166 2167 clocks = <&rpmhcc RPMH_CXO_CLK>; 2168 clock-names = "xo"; 2169 2170 power-domains = <&rpmhpd 4>, 2171 <&rpmhpd 5>; 2172 power-domain-names = "lcx", "lmx"; 2173 2174 memory-region = <&pil_slpi_mem>; 2175 2176 qcom,qmp = <&aoss_qmp>; 2177 2178 qcom,smem-states = <&smp2p_slpi_out 0>; 2179 qcom,smem-state-names = "stop"; 2180 2181 status = "disabled"; 2182 2183 glink-edge { 2184 interrupts-extended = <&ipcc IPCC_CLIENT_SLPI 2185 IPCC_MPROC_SIGNAL_GLINK_QMP 2186 IRQ_TYPE_EDGE_RISING>; 2187 mboxes = <&ipcc IPCC_CLIENT_SLPI 2188 IPCC_MPROC_SIGNAL_GLINK_QMP>; 2189 2190 label = "slpi"; 2191 qcom,remote-pid = <3>; 2192 2193 fastrpc { 2194 compatible = "qcom,fastrpc"; 2195 qcom,glink-channels = "fastrpcglink-apps-dsp"; 2196 label = "sdsp"; 2197 qcom,non-secure-domain; 2198 #address-cells = <1>; 2199 #size-cells = <0>; 2200 2201 compute-cb@1 { 2202 compatible = "qcom,fastrpc-compute-cb"; 2203 reg = <1>; 2204 iommus = <&apps_smmu 0x0541 0x0>; 2205 }; 2206 2207 compute-cb@2 { 2208 compatible = "qcom,fastrpc-compute-cb"; 2209 reg = <2>; 2210 iommus = <&apps_smmu 0x0542 0x0>; 2211 }; 2212 2213 compute-cb@3 { 2214 compatible = "qcom,fastrpc-compute-cb"; 2215 reg = <3>; 2216 iommus = <&apps_smmu 0x0543 0x0>; 2217 /* note: shared-cb = <4> in downstream */ 2218 }; 2219 }; 2220 }; 2221 }; 2222 2223 cdsp: remoteproc@98900000 { 2224 compatible = "qcom,sm8350-cdsp-pas"; 2225 reg = <0 0x098900000 0 0x1400000>; 2226 2227 interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, 2228 <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, 2229 <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, 2230 <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, 2231 <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; 2232 interrupt-names = "wdog", "fatal", "ready", 2233 "handover", "stop-ack"; 2234 2235 clocks = <&rpmhcc RPMH_CXO_CLK>; 2236 clock-names = "xo"; 2237 2238 power-domains = <&rpmhpd 0>, 2239 <&rpmhpd 10>; 2240 power-domain-names = "cx", "mxc"; 2241 2242 interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>; 2243 2244 memory-region = <&pil_cdsp_mem>; 2245 2246 qcom,qmp = <&aoss_qmp>; 2247 2248 qcom,smem-states = <&smp2p_cdsp_out 0>; 2249 qcom,smem-state-names = "stop"; 2250 2251 status = "disabled"; 2252 2253 glink-edge { 2254 interrupts-extended = <&ipcc IPCC_CLIENT_CDSP 2255 IPCC_MPROC_SIGNAL_GLINK_QMP 2256 IRQ_TYPE_EDGE_RISING>; 2257 mboxes = <&ipcc IPCC_CLIENT_CDSP 2258 IPCC_MPROC_SIGNAL_GLINK_QMP>; 2259 2260 label = "cdsp"; 2261 qcom,remote-pid = <5>; 2262 2263 fastrpc { 2264 compatible = "qcom,fastrpc"; 2265 qcom,glink-channels = "fastrpcglink-apps-dsp"; 2266 label = "cdsp"; 2267 qcom,non-secure-domain; 2268 #address-cells = <1>; 2269 #size-cells = <0>; 2270 2271 compute-cb@1 { 2272 compatible = "qcom,fastrpc-compute-cb"; 2273 reg = <1>; 2274 iommus = <&apps_smmu 0x2161 0x0400>, 2275 <&apps_smmu 0x1181 0x0420>; 2276 }; 2277 2278 compute-cb@2 { 2279 compatible = "qcom,fastrpc-compute-cb"; 2280 reg = <2>; 2281 iommus = <&apps_smmu 0x2162 0x0400>, 2282 <&apps_smmu 0x1182 0x0420>; 2283 }; 2284 2285 compute-cb@3 { 2286 compatible = "qcom,fastrpc-compute-cb"; 2287 reg = <3>; 2288 iommus = <&apps_smmu 0x2163 0x0400>, 2289 <&apps_smmu 0x1183 0x0420>; 2290 }; 2291 2292 compute-cb@4 { 2293 compatible = "qcom,fastrpc-compute-cb"; 2294 reg = <4>; 2295 iommus = <&apps_smmu 0x2164 0x0400>, 2296 <&apps_smmu 0x1184 0x0420>; 2297 }; 2298 2299 compute-cb@5 { 2300 compatible = "qcom,fastrpc-compute-cb"; 2301 reg = <5>; 2302 iommus = <&apps_smmu 0x2165 0x0400>, 2303 <&apps_smmu 0x1185 0x0420>; 2304 }; 2305 2306 compute-cb@6 { 2307 compatible = "qcom,fastrpc-compute-cb"; 2308 reg = <6>; 2309 iommus = <&apps_smmu 0x2166 0x0400>, 2310 <&apps_smmu 0x1186 0x0420>; 2311 }; 2312 2313 compute-cb@7 { 2314 compatible = "qcom,fastrpc-compute-cb"; 2315 reg = <7>; 2316 iommus = <&apps_smmu 0x2167 0x0400>, 2317 <&apps_smmu 0x1187 0x0420>; 2318 }; 2319 2320 compute-cb@8 { 2321 compatible = "qcom,fastrpc-compute-cb"; 2322 reg = <8>; 2323 iommus = <&apps_smmu 0x2168 0x0400>, 2324 <&apps_smmu 0x1188 0x0420>; 2325 }; 2326 2327 /* note: secure cb9 in downstream */ 2328 }; 2329 }; 2330 }; 2331 2332 usb_1_hsphy: phy@88e3000 { 2333 compatible = "qcom,sm8350-usb-hs-phy", 2334 "qcom,usb-snps-hs-7nm-phy"; 2335 reg = <0 0x088e3000 0 0x400>; 2336 status = "disabled"; 2337 #phy-cells = <0>; 2338 2339 clocks = <&rpmhcc RPMH_CXO_CLK>; 2340 clock-names = "ref"; 2341 2342 resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; 2343 }; 2344 2345 usb_2_hsphy: phy@88e4000 { 2346 compatible = "qcom,sm8250-usb-hs-phy", 2347 "qcom,usb-snps-hs-7nm-phy"; 2348 reg = <0 0x088e4000 0 0x400>; 2349 status = "disabled"; 2350 #phy-cells = <0>; 2351 2352 clocks = <&rpmhcc RPMH_CXO_CLK>; 2353 clock-names = "ref"; 2354 2355 resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; 2356 }; 2357 2358 usb_1_qmpphy: phy-wrapper@88e9000 { 2359 compatible = "qcom,sm8350-qmp-usb3-phy"; 2360 reg = <0 0x088e9000 0 0x200>, 2361 <0 0x088e8000 0 0x20>; 2362 status = "disabled"; 2363 #address-cells = <2>; 2364 #size-cells = <2>; 2365 ranges; 2366 2367 clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, 2368 <&rpmhcc RPMH_CXO_CLK>, 2369 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; 2370 clock-names = "aux", "ref_clk_src", "com_aux"; 2371 2372 resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, 2373 <&gcc GCC_USB3_PHY_PRIM_BCR>; 2374 reset-names = "phy", "common"; 2375 2376 usb_1_ssphy: phy@88e9200 { 2377 reg = <0 0x088e9200 0 0x200>, 2378 <0 0x088e9400 0 0x200>, 2379 <0 0x088e9c00 0 0x400>, 2380 <0 0x088e9600 0 0x200>, 2381 <0 0x088e9800 0 0x200>, 2382 <0 0x088e9a00 0 0x100>; 2383 #phy-cells = <0>; 2384 #clock-cells = <1>; 2385 clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; 2386 clock-names = "pipe0"; 2387 clock-output-names = "usb3_phy_pipe_clk_src"; 2388 }; 2389 }; 2390 2391 usb_2_qmpphy: phy-wrapper@88eb000 { 2392 compatible = "qcom,sm8350-qmp-usb3-uni-phy"; 2393 reg = <0 0x088eb000 0 0x200>; 2394 status = "disabled"; 2395 #address-cells = <2>; 2396 #size-cells = <2>; 2397 ranges; 2398 2399 clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, 2400 <&rpmhcc RPMH_CXO_CLK>, 2401 <&gcc GCC_USB3_SEC_CLKREF_EN>, 2402 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; 2403 clock-names = "aux", "ref_clk_src", "ref", "com_aux"; 2404 2405 resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, 2406 <&gcc GCC_USB3_PHY_SEC_BCR>; 2407 reset-names = "phy", "common"; 2408 2409 usb_2_ssphy: phy@88ebe00 { 2410 reg = <0 0x088ebe00 0 0x200>, 2411 <0 0x088ec000 0 0x200>, 2412 <0 0x088eb200 0 0x1100>; 2413 #phy-cells = <0>; 2414 #clock-cells = <1>; 2415 clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; 2416 clock-names = "pipe0"; 2417 clock-output-names = "usb3_uni_phy_pipe_clk_src"; 2418 }; 2419 }; 2420 2421 dc_noc: interconnect@90c0000 { 2422 compatible = "qcom,sm8350-dc-noc"; 2423 reg = <0 0x090c0000 0 0x4200>; 2424 #interconnect-cells = <1>; 2425 qcom,bcm-voters = <&apps_bcm_voter>; 2426 }; 2427 2428 gem_noc: interconnect@9100000 { 2429 compatible = "qcom,sm8350-gem-noc"; 2430 reg = <0 0x09100000 0 0xb4000>; 2431 #interconnect-cells = <1>; 2432 qcom,bcm-voters = <&apps_bcm_voter>; 2433 }; 2434 2435 system-cache-controller@9200000 { 2436 compatible = "qcom,sm8350-llcc"; 2437 reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>; 2438 reg-names = "llcc_base", "llcc_broadcast_base"; 2439 }; 2440 2441 usb_1: usb@a6f8800 { 2442 compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; 2443 reg = <0 0x0a6f8800 0 0x400>; 2444 status = "disabled"; 2445 #address-cells = <2>; 2446 #size-cells = <2>; 2447 ranges; 2448 2449 clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, 2450 <&gcc GCC_USB30_PRIM_MASTER_CLK>, 2451 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, 2452 <&gcc GCC_USB30_PRIM_SLEEP_CLK>, 2453 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; 2454 clock-names = "cfg_noc", 2455 "core", 2456 "iface", 2457 "sleep", 2458 "mock_utmi"; 2459 2460 assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, 2461 <&gcc GCC_USB30_PRIM_MASTER_CLK>; 2462 assigned-clock-rates = <19200000>, <200000000>; 2463 2464 interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, 2465 <&pdc 14 IRQ_TYPE_EDGE_BOTH>, 2466 <&pdc 15 IRQ_TYPE_EDGE_BOTH>, 2467 <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; 2468 interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", 2469 "dm_hs_phy_irq", "ss_phy_irq"; 2470 2471 power-domains = <&gcc USB30_PRIM_GDSC>; 2472 2473 resets = <&gcc GCC_USB30_PRIM_BCR>; 2474 2475 usb_1_dwc3: usb@a600000 { 2476 compatible = "snps,dwc3"; 2477 reg = <0 0x0a600000 0 0xcd00>; 2478 interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; 2479 iommus = <&apps_smmu 0x0 0x0>; 2480 snps,dis_u2_susphy_quirk; 2481 snps,dis_enblslpm_quirk; 2482 phys = <&usb_1_hsphy>, <&usb_1_ssphy>; 2483 phy-names = "usb2-phy", "usb3-phy"; 2484 }; 2485 }; 2486 2487 usb_2: usb@a8f8800 { 2488 compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; 2489 reg = <0 0x0a8f8800 0 0x400>; 2490 status = "disabled"; 2491 #address-cells = <2>; 2492 #size-cells = <2>; 2493 ranges; 2494 2495 clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, 2496 <&gcc GCC_USB30_SEC_MASTER_CLK>, 2497 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, 2498 <&gcc GCC_USB30_SEC_SLEEP_CLK>, 2499 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, 2500 <&gcc GCC_USB3_SEC_CLKREF_EN>; 2501 clock-names = "cfg_noc", 2502 "core", 2503 "iface", 2504 "sleep", 2505 "mock_utmi", 2506 "xo"; 2507 2508 assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, 2509 <&gcc GCC_USB30_SEC_MASTER_CLK>; 2510 assigned-clock-rates = <19200000>, <200000000>; 2511 2512 interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, 2513 <&pdc 12 IRQ_TYPE_EDGE_BOTH>, 2514 <&pdc 13 IRQ_TYPE_EDGE_BOTH>, 2515 <&pdc 16 IRQ_TYPE_LEVEL_HIGH>; 2516 interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", 2517 "dm_hs_phy_irq", "ss_phy_irq"; 2518 2519 power-domains = <&gcc USB30_SEC_GDSC>; 2520 2521 resets = <&gcc GCC_USB30_SEC_BCR>; 2522 2523 usb_2_dwc3: usb@a800000 { 2524 compatible = "snps,dwc3"; 2525 reg = <0 0x0a800000 0 0xcd00>; 2526 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; 2527 iommus = <&apps_smmu 0x20 0x0>; 2528 snps,dis_u2_susphy_quirk; 2529 snps,dis_enblslpm_quirk; 2530 phys = <&usb_2_hsphy>, <&usb_2_ssphy>; 2531 phy-names = "usb2-phy", "usb3-phy"; 2532 }; 2533 }; 2534 2535 adsp: remoteproc@17300000 { 2536 compatible = "qcom,sm8350-adsp-pas"; 2537 reg = <0 0x17300000 0 0x100>; 2538 2539 interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, 2540 <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, 2541 <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, 2542 <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, 2543 <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; 2544 interrupt-names = "wdog", "fatal", "ready", 2545 "handover", "stop-ack"; 2546 2547 clocks = <&rpmhcc RPMH_CXO_CLK>; 2548 clock-names = "xo"; 2549 2550 power-domains = <&rpmhpd 4>, 2551 <&rpmhpd 5>; 2552 power-domain-names = "lcx", "lmx"; 2553 2554 memory-region = <&pil_adsp_mem>; 2555 2556 qcom,qmp = <&aoss_qmp>; 2557 2558 qcom,smem-states = <&smp2p_adsp_out 0>; 2559 qcom,smem-state-names = "stop"; 2560 2561 status = "disabled"; 2562 2563 glink-edge { 2564 interrupts-extended = <&ipcc IPCC_CLIENT_LPASS 2565 IPCC_MPROC_SIGNAL_GLINK_QMP 2566 IRQ_TYPE_EDGE_RISING>; 2567 mboxes = <&ipcc IPCC_CLIENT_LPASS 2568 IPCC_MPROC_SIGNAL_GLINK_QMP>; 2569 2570 label = "lpass"; 2571 qcom,remote-pid = <2>; 2572 2573 fastrpc { 2574 compatible = "qcom,fastrpc"; 2575 qcom,glink-channels = "fastrpcglink-apps-dsp"; 2576 label = "adsp"; 2577 qcom,non-secure-domain; 2578 #address-cells = <1>; 2579 #size-cells = <0>; 2580 2581 compute-cb@3 { 2582 compatible = "qcom,fastrpc-compute-cb"; 2583 reg = <3>; 2584 iommus = <&apps_smmu 0x1803 0x0>; 2585 }; 2586 2587 compute-cb@4 { 2588 compatible = "qcom,fastrpc-compute-cb"; 2589 reg = <4>; 2590 iommus = <&apps_smmu 0x1804 0x0>; 2591 }; 2592 2593 compute-cb@5 { 2594 compatible = "qcom,fastrpc-compute-cb"; 2595 reg = <5>; 2596 iommus = <&apps_smmu 0x1805 0x0>; 2597 }; 2598 }; 2599 }; 2600 }; 2601 }; 2602 2603 thermal_zones: thermal-zones { 2604 cpu0-thermal { 2605 polling-delay-passive = <250>; 2606 polling-delay = <1000>; 2607 2608 thermal-sensors = <&tsens0 1>; 2609 2610 trips { 2611 cpu0_alert0: trip-point0 { 2612 temperature = <90000>; 2613 hysteresis = <2000>; 2614 type = "passive"; 2615 }; 2616 2617 cpu0_alert1: trip-point1 { 2618 temperature = <95000>; 2619 hysteresis = <2000>; 2620 type = "passive"; 2621 }; 2622 2623 cpu0_crit: cpu_crit { 2624 temperature = <110000>; 2625 hysteresis = <1000>; 2626 type = "critical"; 2627 }; 2628 }; 2629 2630 cooling-maps { 2631 map0 { 2632 trip = <&cpu0_alert0>; 2633 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2634 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2635 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2636 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2637 }; 2638 map1 { 2639 trip = <&cpu0_alert1>; 2640 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2641 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2642 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2643 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2644 }; 2645 }; 2646 }; 2647 2648 cpu1-thermal { 2649 polling-delay-passive = <250>; 2650 polling-delay = <1000>; 2651 2652 thermal-sensors = <&tsens0 2>; 2653 2654 trips { 2655 cpu1_alert0: trip-point0 { 2656 temperature = <90000>; 2657 hysteresis = <2000>; 2658 type = "passive"; 2659 }; 2660 2661 cpu1_alert1: trip-point1 { 2662 temperature = <95000>; 2663 hysteresis = <2000>; 2664 type = "passive"; 2665 }; 2666 2667 cpu1_crit: cpu_crit { 2668 temperature = <110000>; 2669 hysteresis = <1000>; 2670 type = "critical"; 2671 }; 2672 }; 2673 2674 cooling-maps { 2675 map0 { 2676 trip = <&cpu1_alert0>; 2677 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2678 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2679 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2680 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2681 }; 2682 map1 { 2683 trip = <&cpu1_alert1>; 2684 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2685 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2686 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2687 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2688 }; 2689 }; 2690 }; 2691 2692 cpu2-thermal { 2693 polling-delay-passive = <250>; 2694 polling-delay = <1000>; 2695 2696 thermal-sensors = <&tsens0 3>; 2697 2698 trips { 2699 cpu2_alert0: trip-point0 { 2700 temperature = <90000>; 2701 hysteresis = <2000>; 2702 type = "passive"; 2703 }; 2704 2705 cpu2_alert1: trip-point1 { 2706 temperature = <95000>; 2707 hysteresis = <2000>; 2708 type = "passive"; 2709 }; 2710 2711 cpu2_crit: cpu_crit { 2712 temperature = <110000>; 2713 hysteresis = <1000>; 2714 type = "critical"; 2715 }; 2716 }; 2717 2718 cooling-maps { 2719 map0 { 2720 trip = <&cpu2_alert0>; 2721 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2722 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2723 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2724 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2725 }; 2726 map1 { 2727 trip = <&cpu2_alert1>; 2728 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2729 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2730 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2731 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2732 }; 2733 }; 2734 }; 2735 2736 cpu3-thermal { 2737 polling-delay-passive = <250>; 2738 polling-delay = <1000>; 2739 2740 thermal-sensors = <&tsens0 4>; 2741 2742 trips { 2743 cpu3_alert0: trip-point0 { 2744 temperature = <90000>; 2745 hysteresis = <2000>; 2746 type = "passive"; 2747 }; 2748 2749 cpu3_alert1: trip-point1 { 2750 temperature = <95000>; 2751 hysteresis = <2000>; 2752 type = "passive"; 2753 }; 2754 2755 cpu3_crit: cpu_crit { 2756 temperature = <110000>; 2757 hysteresis = <1000>; 2758 type = "critical"; 2759 }; 2760 }; 2761 2762 cooling-maps { 2763 map0 { 2764 trip = <&cpu3_alert0>; 2765 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2766 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2767 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2768 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2769 }; 2770 map1 { 2771 trip = <&cpu3_alert1>; 2772 cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2773 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2774 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2775 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2776 }; 2777 }; 2778 }; 2779 2780 cpu4-top-thermal { 2781 polling-delay-passive = <250>; 2782 polling-delay = <1000>; 2783 2784 thermal-sensors = <&tsens0 7>; 2785 2786 trips { 2787 cpu4_top_alert0: trip-point0 { 2788 temperature = <90000>; 2789 hysteresis = <2000>; 2790 type = "passive"; 2791 }; 2792 2793 cpu4_top_alert1: trip-point1 { 2794 temperature = <95000>; 2795 hysteresis = <2000>; 2796 type = "passive"; 2797 }; 2798 2799 cpu4_top_crit: cpu_crit { 2800 temperature = <110000>; 2801 hysteresis = <1000>; 2802 type = "critical"; 2803 }; 2804 }; 2805 2806 cooling-maps { 2807 map0 { 2808 trip = <&cpu4_top_alert0>; 2809 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2810 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2811 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2812 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2813 }; 2814 map1 { 2815 trip = <&cpu4_top_alert1>; 2816 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2817 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2818 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2819 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2820 }; 2821 }; 2822 }; 2823 2824 cpu5-top-thermal { 2825 polling-delay-passive = <250>; 2826 polling-delay = <1000>; 2827 2828 thermal-sensors = <&tsens0 8>; 2829 2830 trips { 2831 cpu5_top_alert0: trip-point0 { 2832 temperature = <90000>; 2833 hysteresis = <2000>; 2834 type = "passive"; 2835 }; 2836 2837 cpu5_top_alert1: trip-point1 { 2838 temperature = <95000>; 2839 hysteresis = <2000>; 2840 type = "passive"; 2841 }; 2842 2843 cpu5_top_crit: cpu_crit { 2844 temperature = <110000>; 2845 hysteresis = <1000>; 2846 type = "critical"; 2847 }; 2848 }; 2849 2850 cooling-maps { 2851 map0 { 2852 trip = <&cpu5_top_alert0>; 2853 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2854 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2855 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2856 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2857 }; 2858 map1 { 2859 trip = <&cpu5_top_alert1>; 2860 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2861 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2862 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2863 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2864 }; 2865 }; 2866 }; 2867 2868 cpu6-top-thermal { 2869 polling-delay-passive = <250>; 2870 polling-delay = <1000>; 2871 2872 thermal-sensors = <&tsens0 9>; 2873 2874 trips { 2875 cpu6_top_alert0: trip-point0 { 2876 temperature = <90000>; 2877 hysteresis = <2000>; 2878 type = "passive"; 2879 }; 2880 2881 cpu6_top_alert1: trip-point1 { 2882 temperature = <95000>; 2883 hysteresis = <2000>; 2884 type = "passive"; 2885 }; 2886 2887 cpu6_top_crit: cpu_crit { 2888 temperature = <110000>; 2889 hysteresis = <1000>; 2890 type = "critical"; 2891 }; 2892 }; 2893 2894 cooling-maps { 2895 map0 { 2896 trip = <&cpu6_top_alert0>; 2897 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2898 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2899 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2900 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2901 }; 2902 map1 { 2903 trip = <&cpu6_top_alert1>; 2904 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2905 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2906 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2907 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2908 }; 2909 }; 2910 }; 2911 2912 cpu7-top-thermal { 2913 polling-delay-passive = <250>; 2914 polling-delay = <1000>; 2915 2916 thermal-sensors = <&tsens0 10>; 2917 2918 trips { 2919 cpu7_top_alert0: trip-point0 { 2920 temperature = <90000>; 2921 hysteresis = <2000>; 2922 type = "passive"; 2923 }; 2924 2925 cpu7_top_alert1: trip-point1 { 2926 temperature = <95000>; 2927 hysteresis = <2000>; 2928 type = "passive"; 2929 }; 2930 2931 cpu7_top_crit: cpu_crit { 2932 temperature = <110000>; 2933 hysteresis = <1000>; 2934 type = "critical"; 2935 }; 2936 }; 2937 2938 cooling-maps { 2939 map0 { 2940 trip = <&cpu7_top_alert0>; 2941 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2942 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2943 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2944 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2945 }; 2946 map1 { 2947 trip = <&cpu7_top_alert1>; 2948 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2949 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2950 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2951 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2952 }; 2953 }; 2954 }; 2955 2956 cpu4-bottom-thermal { 2957 polling-delay-passive = <250>; 2958 polling-delay = <1000>; 2959 2960 thermal-sensors = <&tsens0 11>; 2961 2962 trips { 2963 cpu4_bottom_alert0: trip-point0 { 2964 temperature = <90000>; 2965 hysteresis = <2000>; 2966 type = "passive"; 2967 }; 2968 2969 cpu4_bottom_alert1: trip-point1 { 2970 temperature = <95000>; 2971 hysteresis = <2000>; 2972 type = "passive"; 2973 }; 2974 2975 cpu4_bottom_crit: cpu_crit { 2976 temperature = <110000>; 2977 hysteresis = <1000>; 2978 type = "critical"; 2979 }; 2980 }; 2981 2982 cooling-maps { 2983 map0 { 2984 trip = <&cpu4_bottom_alert0>; 2985 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2986 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2987 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2988 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2989 }; 2990 map1 { 2991 trip = <&cpu4_bottom_alert1>; 2992 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2993 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2994 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 2995 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 2996 }; 2997 }; 2998 }; 2999 3000 cpu5-bottom-thermal { 3001 polling-delay-passive = <250>; 3002 polling-delay = <1000>; 3003 3004 thermal-sensors = <&tsens0 12>; 3005 3006 trips { 3007 cpu5_bottom_alert0: trip-point0 { 3008 temperature = <90000>; 3009 hysteresis = <2000>; 3010 type = "passive"; 3011 }; 3012 3013 cpu5_bottom_alert1: trip-point1 { 3014 temperature = <95000>; 3015 hysteresis = <2000>; 3016 type = "passive"; 3017 }; 3018 3019 cpu5_bottom_crit: cpu_crit { 3020 temperature = <110000>; 3021 hysteresis = <1000>; 3022 type = "critical"; 3023 }; 3024 }; 3025 3026 cooling-maps { 3027 map0 { 3028 trip = <&cpu5_bottom_alert0>; 3029 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 3030 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 3031 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 3032 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 3033 }; 3034 map1 { 3035 trip = <&cpu5_bottom_alert1>; 3036 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 3037 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 3038 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 3039 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 3040 }; 3041 }; 3042 }; 3043 3044 cpu6-bottom-thermal { 3045 polling-delay-passive = <250>; 3046 polling-delay = <1000>; 3047 3048 thermal-sensors = <&tsens0 13>; 3049 3050 trips { 3051 cpu6_bottom_alert0: trip-point0 { 3052 temperature = <90000>; 3053 hysteresis = <2000>; 3054 type = "passive"; 3055 }; 3056 3057 cpu6_bottom_alert1: trip-point1 { 3058 temperature = <95000>; 3059 hysteresis = <2000>; 3060 type = "passive"; 3061 }; 3062 3063 cpu6_bottom_crit: cpu_crit { 3064 temperature = <110000>; 3065 hysteresis = <1000>; 3066 type = "critical"; 3067 }; 3068 }; 3069 3070 cooling-maps { 3071 map0 { 3072 trip = <&cpu6_bottom_alert0>; 3073 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 3074 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 3075 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 3076 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 3077 }; 3078 map1 { 3079 trip = <&cpu6_bottom_alert1>; 3080 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 3081 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 3082 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 3083 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 3084 }; 3085 }; 3086 }; 3087 3088 cpu7-bottom-thermal { 3089 polling-delay-passive = <250>; 3090 polling-delay = <1000>; 3091 3092 thermal-sensors = <&tsens0 14>; 3093 3094 trips { 3095 cpu7_bottom_alert0: trip-point0 { 3096 temperature = <90000>; 3097 hysteresis = <2000>; 3098 type = "passive"; 3099 }; 3100 3101 cpu7_bottom_alert1: trip-point1 { 3102 temperature = <95000>; 3103 hysteresis = <2000>; 3104 type = "passive"; 3105 }; 3106 3107 cpu7_bottom_crit: cpu_crit { 3108 temperature = <110000>; 3109 hysteresis = <1000>; 3110 type = "critical"; 3111 }; 3112 }; 3113 3114 cooling-maps { 3115 map0 { 3116 trip = <&cpu7_bottom_alert0>; 3117 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 3118 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 3119 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 3120 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 3121 }; 3122 map1 { 3123 trip = <&cpu7_bottom_alert1>; 3124 cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 3125 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 3126 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 3127 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; 3128 }; 3129 }; 3130 }; 3131 3132 aoss0-thermal { 3133 polling-delay-passive = <250>; 3134 polling-delay = <1000>; 3135 3136 thermal-sensors = <&tsens0 0>; 3137 3138 trips { 3139 aoss0_alert0: trip-point0 { 3140 temperature = <90000>; 3141 hysteresis = <2000>; 3142 type = "hot"; 3143 }; 3144 }; 3145 }; 3146 3147 cluster0-thermal { 3148 polling-delay-passive = <250>; 3149 polling-delay = <1000>; 3150 3151 thermal-sensors = <&tsens0 5>; 3152 3153 trips { 3154 cluster0_alert0: trip-point0 { 3155 temperature = <90000>; 3156 hysteresis = <2000>; 3157 type = "hot"; 3158 }; 3159 cluster0_crit: cluster0_crit { 3160 temperature = <110000>; 3161 hysteresis = <2000>; 3162 type = "critical"; 3163 }; 3164 }; 3165 }; 3166 3167 cluster1-thermal { 3168 polling-delay-passive = <250>; 3169 polling-delay = <1000>; 3170 3171 thermal-sensors = <&tsens0 6>; 3172 3173 trips { 3174 cluster1_alert0: trip-point0 { 3175 temperature = <90000>; 3176 hysteresis = <2000>; 3177 type = "hot"; 3178 }; 3179 cluster1_crit: cluster1_crit { 3180 temperature = <110000>; 3181 hysteresis = <2000>; 3182 type = "critical"; 3183 }; 3184 }; 3185 }; 3186 3187 aoss1-thermal { 3188 polling-delay-passive = <250>; 3189 polling-delay = <1000>; 3190 3191 thermal-sensors = <&tsens1 0>; 3192 3193 trips { 3194 aoss1_alert0: trip-point0 { 3195 temperature = <90000>; 3196 hysteresis = <2000>; 3197 type = "hot"; 3198 }; 3199 }; 3200 }; 3201 3202 gpu-top-thermal { 3203 polling-delay-passive = <250>; 3204 polling-delay = <1000>; 3205 3206 thermal-sensors = <&tsens1 1>; 3207 3208 trips { 3209 gpu1_alert0: trip-point0 { 3210 temperature = <90000>; 3211 hysteresis = <1000>; 3212 type = "hot"; 3213 }; 3214 }; 3215 }; 3216 3217 gpu-bottom-thermal { 3218 polling-delay-passive = <250>; 3219 polling-delay = <1000>; 3220 3221 thermal-sensors = <&tsens1 2>; 3222 3223 trips { 3224 gpu2_alert0: trip-point0 { 3225 temperature = <90000>; 3226 hysteresis = <1000>; 3227 type = "hot"; 3228 }; 3229 }; 3230 }; 3231 3232 nspss1-thermal { 3233 polling-delay-passive = <250>; 3234 polling-delay = <1000>; 3235 3236 thermal-sensors = <&tsens1 3>; 3237 3238 trips { 3239 nspss1_alert0: trip-point0 { 3240 temperature = <90000>; 3241 hysteresis = <1000>; 3242 type = "hot"; 3243 }; 3244 }; 3245 }; 3246 3247 nspss2-thermal { 3248 polling-delay-passive = <250>; 3249 polling-delay = <1000>; 3250 3251 thermal-sensors = <&tsens1 4>; 3252 3253 trips { 3254 nspss2_alert0: trip-point0 { 3255 temperature = <90000>; 3256 hysteresis = <1000>; 3257 type = "hot"; 3258 }; 3259 }; 3260 }; 3261 3262 nspss3-thermal { 3263 polling-delay-passive = <250>; 3264 polling-delay = <1000>; 3265 3266 thermal-sensors = <&tsens1 5>; 3267 3268 trips { 3269 nspss3_alert0: trip-point0 { 3270 temperature = <90000>; 3271 hysteresis = <1000>; 3272 type = "hot"; 3273 }; 3274 }; 3275 }; 3276 3277 video-thermal { 3278 polling-delay-passive = <250>; 3279 polling-delay = <1000>; 3280 3281 thermal-sensors = <&tsens1 6>; 3282 3283 trips { 3284 video_alert0: trip-point0 { 3285 temperature = <90000>; 3286 hysteresis = <2000>; 3287 type = "hot"; 3288 }; 3289 }; 3290 }; 3291 3292 mem-thermal { 3293 polling-delay-passive = <250>; 3294 polling-delay = <1000>; 3295 3296 thermal-sensors = <&tsens1 7>; 3297 3298 trips { 3299 mem_alert0: trip-point0 { 3300 temperature = <90000>; 3301 hysteresis = <2000>; 3302 type = "hot"; 3303 }; 3304 }; 3305 }; 3306 3307 modem1-top-thermal { 3308 polling-delay-passive = <250>; 3309 polling-delay = <1000>; 3310 3311 thermal-sensors = <&tsens1 8>; 3312 3313 trips { 3314 modem1_alert0: trip-point0 { 3315 temperature = <90000>; 3316 hysteresis = <2000>; 3317 type = "hot"; 3318 }; 3319 }; 3320 }; 3321 3322 modem2-top-thermal { 3323 polling-delay-passive = <250>; 3324 polling-delay = <1000>; 3325 3326 thermal-sensors = <&tsens1 9>; 3327 3328 trips { 3329 modem2_alert0: trip-point0 { 3330 temperature = <90000>; 3331 hysteresis = <2000>; 3332 type = "hot"; 3333 }; 3334 }; 3335 }; 3336 3337 modem3-top-thermal { 3338 polling-delay-passive = <250>; 3339 polling-delay = <1000>; 3340 3341 thermal-sensors = <&tsens1 10>; 3342 3343 trips { 3344 modem3_alert0: trip-point0 { 3345 temperature = <90000>; 3346 hysteresis = <2000>; 3347 type = "hot"; 3348 }; 3349 }; 3350 }; 3351 3352 modem4-top-thermal { 3353 polling-delay-passive = <250>; 3354 polling-delay = <1000>; 3355 3356 thermal-sensors = <&tsens1 11>; 3357 3358 trips { 3359 modem4_alert0: trip-point0 { 3360 temperature = <90000>; 3361 hysteresis = <2000>; 3362 type = "hot"; 3363 }; 3364 }; 3365 }; 3366 3367 camera-top-thermal { 3368 polling-delay-passive = <250>; 3369 polling-delay = <1000>; 3370 3371 thermal-sensors = <&tsens1 12>; 3372 3373 trips { 3374 camera1_alert0: trip-point0 { 3375 temperature = <90000>; 3376 hysteresis = <2000>; 3377 type = "hot"; 3378 }; 3379 }; 3380 }; 3381 3382 cam-bottom-thermal { 3383 polling-delay-passive = <250>; 3384 polling-delay = <1000>; 3385 3386 thermal-sensors = <&tsens1 13>; 3387 3388 trips { 3389 camera2_alert0: trip-point0 { 3390 temperature = <90000>; 3391 hysteresis = <2000>; 3392 type = "hot"; 3393 }; 3394 }; 3395 }; 3396 }; 3397 3398 timer { 3399 compatible = "arm,armv8-timer"; 3400 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, 3401 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, 3402 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, 3403 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; 3404 }; 3405};