rk3399-hugsun-x99.dts (15286B)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/dts-v1/; 3#include <dt-bindings/pwm/pwm.h> 4#include <dt-bindings/input/input.h> 5#include <dt-bindings/interrupt-controller/irq.h> 6#include "rk3399.dtsi" 7#include "rk3399-opp.dtsi" 8 9/ { 10 model = "Hugsun X99 TV BOX"; 11 compatible = "hugsun,x99", "rockchip,rk3399"; 12 13 aliases { 14 mmc0 = &sdio0; 15 mmc1 = &sdmmc; 16 mmc2 = &sdhci; 17 }; 18 19 chosen { 20 stdout-path = "serial2:1500000n8"; 21 }; 22 23 clkin_gmac: external-gmac-clock { 24 compatible = "fixed-clock"; 25 clock-frequency = <125000000>; 26 clock-output-names = "clkin_gmac"; 27 #clock-cells = <0>; 28 }; 29 30 dc_5v: dc-5v { 31 compatible = "regulator-fixed"; 32 regulator-name = "dc_5v"; 33 regulator-always-on; 34 regulator-boot-on; 35 regulator-min-microvolt = <5000000>; 36 regulator-max-microvolt = <5000000>; 37 }; 38 39 ir-receiver { 40 compatible = "gpio-ir-receiver"; 41 gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; 42 pinctrl-names = "default"; 43 pinctrl-0 = <&ir_rx>; 44 }; 45 46 leds { 47 compatible = "gpio-leds"; 48 pinctrl-names = "default"; 49 pinctrl-0 = <&power_led_pin>; 50 51 power_led: led-0 { 52 label = "blue:power"; 53 gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; 54 default-state = "on"; 55 linux,default-trigger = "default-on"; 56 }; 57 }; 58 59 vcc_sys: vcc-sys { 60 compatible = "regulator-fixed"; 61 regulator-name = "vcc_sys"; 62 regulator-min-microvolt = <5000000>; 63 regulator-max-microvolt = <5000000>; 64 regulator-always-on; 65 vin-supply = <&dc_5v>; 66 }; 67 68 vcc_phy: vcc-phy-regulator { 69 compatible = "regulator-fixed"; 70 regulator-name = "vcc_phy"; 71 regulator-always-on; 72 regulator-boot-on; 73 }; 74 75 vcc1v8_s0: vcc1v8-s0 { 76 compatible = "regulator-fixed"; 77 regulator-name = "vcc1v8_s0"; 78 regulator-min-microvolt = <1800000>; 79 regulator-max-microvolt = <1800000>; 80 regulator-always-on; 81 }; 82 83 vcc3v3_sys: vcc3v3-sys { 84 compatible = "regulator-fixed"; 85 regulator-name = "vcc3v3_sys"; 86 regulator-min-microvolt = <3300000>; 87 regulator-max-microvolt = <3300000>; 88 regulator-always-on; 89 vin-supply = <&vcc_sys>; 90 }; 91 92 vcc5v0_host: vcc5v0-host-regulator { 93 compatible = "regulator-fixed"; 94 enable-active-high; 95 gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; 96 pinctrl-names = "default"; 97 pinctrl-0 = <&host_vbus_drv>; 98 regulator-name = "vcc5v0_host"; 99 regulator-always-on; 100 }; 101 102 vcc5v0_typec: vcc5v0-typec-regulator { 103 compatible = "regulator-fixed"; 104 enable-active-high; 105 gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; 106 pinctrl-names = "default"; 107 pinctrl-0 = <&vcc5v0_typec_en>; 108 regulator-name = "vcc5v0_typec"; 109 regulator-always-on; 110 vin-supply = <&vcc5v0_usb>; 111 }; 112 113 vcc5v0_usb: vcc5v0-usb { 114 compatible = "regulator-fixed"; 115 regulator-name = "vcc5v0_usb"; 116 regulator-always-on; 117 regulator-boot-on; 118 regulator-min-microvolt = <5000000>; 119 regulator-max-microvolt = <5000000>; 120 vin-supply = <&dc_5v>; 121 }; 122 123 vdd_log: vdd-log { 124 compatible = "pwm-regulator"; 125 pwms = <&pwm2 0 25000 1>; 126 pwm-supply = <&vcc_sys>; 127 regulator-name = "vdd_log"; 128 regulator-min-microvolt = <800000>; 129 regulator-max-microvolt = <1400000>; 130 regulator-always-on; 131 regulator-boot-on; 132 }; 133 134 sdio_pwrseq: sdio-pwrseq { 135 compatible = "mmc-pwrseq-simple"; 136 clocks = <&rk808 1>; 137 clock-names = "ext_clock"; 138 pinctrl-names = "default"; 139 pinctrl-0 = <&wifi_reg_on_h>; 140 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; 141 }; 142 143}; 144 145&cpu_l0 { 146 cpu-supply = <&vdd_cpu_l>; 147}; 148 149&cpu_l1 { 150 cpu-supply = <&vdd_cpu_l>; 151}; 152 153&cpu_l2 { 154 cpu-supply = <&vdd_cpu_l>; 155}; 156 157&cpu_l3 { 158 cpu-supply = <&vdd_cpu_l>; 159}; 160 161&cpu_b0 { 162 cpu-supply = <&vdd_cpu_b>; 163}; 164 165&cpu_b1 { 166 cpu-supply = <&vdd_cpu_b>; 167}; 168 169&emmc_phy { 170 status = "okay"; 171}; 172 173&gmac { 174 assigned-clocks = <&cru SCLK_RMII_SRC>; 175 assigned-clock-parents = <&clkin_gmac>; 176 clock_in_out = "input"; 177 phy-supply = <&vcc_phy>; 178 phy-mode = "rgmii"; 179 pinctrl-names = "default"; 180 pinctrl-0 = <&rgmii_pins>; 181 snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; 182 snps,reset-active-low; 183 snps,reset-delays-us = <0 10000 50000>; 184 tx_delay = <0x28>; 185 rx_delay = <0x11>; 186 status = "okay"; 187}; 188 189&gpu { 190 status = "okay"; 191 mali-supply = <&vdd_gpu>; 192}; 193 194&hdmi { 195 ddc-i2c-bus = <&i2c3>; 196 pinctrl-names = "default"; 197 pinctrl-0 = <&hdmi_cec>; 198 status = "okay"; 199}; 200 201&hdmi_sound { 202 status = "okay"; 203}; 204 205&i2c0 { 206 status = "okay"; 207 i2c-scl-rising-time-ns = <180>; 208 i2c-scl-falling-time-ns = <30>; 209 clock-frequency = <400000>; 210 211 vdd_cpu_b: syr827@40 { 212 compatible = "silergy,syr827"; 213 reg = <0x40>; 214 regulator-compatible = "fan53555-reg"; 215 pinctrl-0 = <&vsel1_pin>; 216 regulator-name = "vdd_cpu_b"; 217 regulator-min-microvolt = <712500>; 218 regulator-max-microvolt = <1500000>; 219 regulator-ramp-delay = <1000>; 220 fcs,suspend-voltage-selector = <1>; 221 regulator-always-on; 222 regulator-boot-on; 223 vin-supply = <&vcc_sys>; 224 regulator-state-mem { 225 regulator-off-in-suspend; 226 }; 227 }; 228 229 vdd_gpu: syr828@41 { 230 compatible = "silergy,syr828"; 231 reg = <0x41>; 232 regulator-compatible = "fan53555-reg"; 233 pinctrl-0 = <&vsel2_pin>; 234 regulator-name = "vdd_gpu"; 235 regulator-min-microvolt = <712500>; 236 regulator-max-microvolt = <1500000>; 237 regulator-ramp-delay = <1000>; 238 fcs,suspend-voltage-selector = <1>; 239 regulator-always-on; 240 regulator-boot-on; 241 vin-supply = <&vcc_sys>; 242 regulator-initial-mode = <1>; 243 regulator-state-mem { 244 regulator-off-in-suspend; 245 }; 246 }; 247 248 rk808: pmic@1b { 249 compatible = "rockchip,rk808"; 250 reg = <0x1b>; 251 interrupt-parent = <&gpio1>; 252 interrupts = <21 IRQ_TYPE_LEVEL_LOW>; 253 pinctrl-names = "default"; 254 pinctrl-0 = <&pmic_int_l>; 255 rockchip,system-power-controller; 256 wakeup-source; 257 #clock-cells = <1>; 258 clock-output-names = "xin32k", "rtc_clko_wifi"; 259 260 vcc1-supply = <&vcc_sys>; 261 vcc2-supply = <&vcc_sys>; 262 vcc3-supply = <&vcc_sys>; 263 vcc4-supply = <&vcc_sys>; 264 vcc6-supply = <&vcc_sys>; 265 vcc7-supply = <&vcc_sys>; 266 vcc8-supply = <&vcc3v3_sys>; 267 vcc9-supply = <&vcc_sys>; 268 vcc10-supply = <&vcc_sys>; 269 vcc11-supply = <&vcc_sys>; 270 vcc12-supply = <&vcc3v3_sys>; 271 vddio-supply = <&vcc_1v8>; 272 273 regulators { 274 vdd_center: DCDC_REG1 { 275 regulator-name = "vdd_center"; 276 regulator-min-microvolt = <900000>; 277 regulator-max-microvolt = <900000>; 278 regulator-ramp-delay = <6001>; 279 regulator-always-on; 280 regulator-boot-on; 281 regulator-state-mem { 282 regulator-off-in-suspend; 283 }; 284 }; 285 286 vdd_cpu_l: DCDC_REG2 { 287 regulator-name = "vdd_cpu_l"; 288 regulator-min-microvolt = <750000>; 289 regulator-max-microvolt = <1350000>; 290 regulator-ramp-delay = <6001>; 291 regulator-always-on; 292 regulator-boot-on; 293 regulator-state-mem { 294 regulator-off-in-suspend; 295 }; 296 }; 297 298 vcc_ddr: DCDC_REG3 { 299 regulator-name = "vcc_ddr"; 300 regulator-always-on; 301 regulator-boot-on; 302 regulator-state-mem { 303 regulator-on-in-suspend; 304 }; 305 }; 306 307 vcc_1v8: DCDC_REG4 { 308 regulator-name = "vcc_1v8"; 309 regulator-min-microvolt = <1800000>; 310 regulator-max-microvolt = <1800000>; 311 regulator-always-on; 312 regulator-boot-on; 313 regulator-state-mem { 314 regulator-on-in-suspend; 315 regulator-suspend-microvolt = <1800000>; 316 }; 317 }; 318 319 vcc1v8_dvp: LDO_REG1 { 320 regulator-name = "vcc1v8_dvp"; 321 regulator-min-microvolt = <1800000>; 322 regulator-max-microvolt = <1800000>; 323 regulator-always-on; 324 regulator-boot-on; 325 regulator-state-mem { 326 regulator-on-in-suspend; 327 regulator-suspend-microvolt = <1800000>; 328 }; 329 }; 330 331 vcca1v8_hdmi: LDO_REG2 { 332 regulator-name = "vcca1v8_hdmi"; 333 regulator-min-microvolt = <1800000>; 334 regulator-max-microvolt = <1800000>; 335 regulator-always-on; 336 regulator-boot-on; 337 regulator-state-mem { 338 regulator-on-in-suspend; 339 regulator-suspend-microvolt = <1800000>; 340 }; 341 }; 342 343 vcca_1v8: LDO_REG3 { 344 regulator-name = "vcca_1v8"; 345 regulator-min-microvolt = <1800000>; 346 regulator-max-microvolt = <1800000>; 347 regulator-always-on; 348 regulator-boot-on; 349 regulator-state-mem { 350 regulator-on-in-suspend; 351 regulator-suspend-microvolt = <1800000>; 352 }; 353 }; 354 355 vcc_sd: LDO_REG4 { 356 regulator-name = "vcc_sd"; 357 regulator-min-microvolt = <1800000>; 358 regulator-max-microvolt = <3300000>; 359 regulator-always-on; 360 regulator-boot-on; 361 regulator-state-mem { 362 regulator-on-in-suspend; 363 regulator-suspend-microvolt = <3300000>; 364 }; 365 }; 366 367 vcc3v0_sd: LDO_REG5 { 368 regulator-name = "vcc3v0_sd"; 369 regulator-min-microvolt = <3000000>; 370 regulator-max-microvolt = <3000000>; 371 regulator-always-on; 372 regulator-boot-on; 373 regulator-state-mem { 374 regulator-on-in-suspend; 375 regulator-suspend-microvolt = <3000000>; 376 }; 377 }; 378 379 vcc_1v5: LDO_REG6 { 380 regulator-name = "vcc_1v5"; 381 regulator-min-microvolt = <1500000>; 382 regulator-max-microvolt = <1500000>; 383 regulator-always-on; 384 regulator-boot-on; 385 regulator-state-mem { 386 regulator-on-in-suspend; 387 regulator-suspend-microvolt = <1500000>; 388 }; 389 }; 390 391 vcca0v9_hdmi: LDO_REG7 { 392 regulator-name = "vcca0v9_hdmi"; 393 regulator-min-microvolt = <900000>; 394 regulator-max-microvolt = <900000>; 395 regulator-always-on; 396 regulator-boot-on; 397 regulator-state-mem { 398 regulator-on-in-suspend; 399 regulator-suspend-microvolt = <900000>; 400 }; 401 }; 402 403 vcc_3v0: LDO_REG8 { 404 regulator-name = "vcc_3v0"; 405 regulator-min-microvolt = <3000000>; 406 regulator-max-microvolt = <3000000>; 407 regulator-always-on; 408 regulator-boot-on; 409 regulator-state-mem { 410 regulator-on-in-suspend; 411 regulator-suspend-microvolt = <3000000>; 412 }; 413 }; 414 415 vcc3v3_s3: SWITCH_REG1 { 416 regulator-name = "vcc3v3_s3"; 417 regulator-always-on; 418 regulator-boot-on; 419 regulator-state-mem { 420 regulator-on-in-suspend; 421 }; 422 }; 423 424 vcc3v3_s0: SWITCH_REG2 { 425 regulator-name = "vcc3v3_s0"; 426 regulator-always-on; 427 regulator-boot-on; 428 regulator-state-mem { 429 regulator-on-in-suspend; 430 }; 431 }; 432 }; 433 }; 434}; 435 436&i2c1 { 437 i2c-scl-rising-time-ns = <300>; 438 i2c-scl-falling-time-ns = <15>; 439 status = "okay"; 440}; 441 442&i2c3 { 443 i2c-scl-rising-time-ns = <450>; 444 i2c-scl-falling-time-ns = <15>; 445 status = "okay"; 446}; 447 448&i2c4 { 449 i2c-scl-rising-time-ns = <600>; 450 i2c-scl-falling-time-ns = <40>; 451 status = "okay"; 452 453 fusb0: typec-portc@22 { 454 compatible = "fcs,fusb302"; 455 reg = <0x22>; 456 interrupt-parent = <&gpio1>; 457 interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; 458 pinctrl-names = "default"; 459 pinctrl-0 = <&fusb0_int>; 460 vbus-supply = <&vcc5v0_typec>; 461 status = "okay"; 462 }; 463}; 464 465&i2c7 { 466 status = "okay"; 467}; 468 469&i2s0 { 470 rockchip,playback-channels = <8>; 471 rockchip,capture-channels = <8>; 472 status = "okay"; 473}; 474 475&i2s1 { 476 rockchip,playback-channels = <2>; 477 rockchip,capture-channels = <2>; 478 status = "okay"; 479}; 480 481&i2s2 { 482 status = "okay"; 483}; 484 485&io_domains { 486 status = "okay"; 487 audio-supply = <&vcc1v8_s0>; 488 bt656-supply = <&vcc1v8_s0>; 489 gpio1830-supply = <&vcc_3v0>; 490 sdmmc-supply = <&vcc_sd>; 491}; 492 493&pmu_io_domains { 494 status = "okay"; 495 pmu1830-supply = <&vcc_1v8>; 496}; 497 498&pinctrl { 499 fusb30x { 500 fusb0_int: fusb0-int { 501 rockchip,pins = 502 <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; 503 }; 504 }; 505 506 gmac { 507 rgmii_sleep_pins: rgmii-sleep-pins { 508 rockchip,pins = 509 <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; 510 }; 511 }; 512 513 ir { 514 ir_rx: ir-rx { 515 rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>; 516 }; 517 }; 518 519 leds { 520 power_led_pin: power-led-pin { 521 rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; 522 }; 523 }; 524 525 pmic { 526 pmic_int_l: pmic-int-l { 527 rockchip,pins = 528 <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; 529 }; 530 531 vsel1_pin: vsel1-pin { 532 rockchip,pins = 533 <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; 534 }; 535 536 vsel2_pin: vsel2-pin { 537 rockchip,pins = 538 <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; 539 }; 540 }; 541 542 sdio { 543 bt_host_wake_l: bt-host-wake-l { 544 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; 545 }; 546 547 bt_reg_on_h: bt-reg-on-h { 548 /* external pullup to VCC1V8_PMUPLL */ 549 rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; 550 }; 551 552 bt_wake_l: bt-wake-l { 553 rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; 554 }; 555 556 wifi_reg_on_h: wifi-reg_on-h { 557 rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; 558 }; 559 }; 560 561 wifi { 562 wifi_host_wake_l: wifi-host-wake-l { 563 rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; 564 }; 565 }; 566 567 usb-typec { 568 vcc5v0_typec_en: vcc5v0_typec_en { 569 rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; 570 }; 571 }; 572 573 usb2 { 574 host_vbus_drv: host-vbus-drv { 575 rockchip,pins = 576 <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; 577 }; 578 }; 579}; 580 581&pwm2 { 582 status = "okay"; 583 pinctrl-0 = <&pwm2_pin_pull_down>; 584}; 585 586&saradc { 587 vref-supply = <&vcc1v8_s0>; 588 status = "okay"; 589}; 590 591&sdmmc { 592 clock-frequency = <150000000>; 593 max-frequency = <150000000>; 594 bus-width = <4>; 595 cap-mmc-highspeed; 596 cap-sd-highspeed; 597 disable-wp; 598 vqmmc-supply = <&vcc_sd>; 599 pinctrl-names = "default"; 600 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; 601 card-detect-delay = <800>; 602 status = "okay"; 603}; 604 605&sdhci { 606 bus-width = <8>; 607 mmc-hs400-1_8v; 608 mmc-hs400-enhanced-strobe; 609 non-removable; 610 keep-power-in-suspend; 611 status = "okay"; 612}; 613 614&sdio0 { 615 bus-width = <4>; 616 clock-frequency = <50000000>; 617 cap-sdio-irq; 618 cap-sd-highspeed; 619 keep-power-in-suspend; 620 mmc-pwrseq = <&sdio_pwrseq>; 621 non-removable; 622 pinctrl-names = "default"; 623 pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; 624 sd-uhs-sdr104; 625 #address-cells = <1>; 626 #size-cells = <0>; 627 status = "okay"; 628 629 brcmf: wifi@1 { 630 compatible = "brcm,bcm4329-fmac"; 631 reg = <1>; 632 interrupt-parent = <&gpio0>; 633 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>; 634 interrupt-names = "host-wake"; 635 pinctrl-names = "default"; 636 pinctrl-0 = <&wifi_host_wake_l>; 637 }; 638}; 639 640&spdif { 641 status = "okay"; 642 pinctrl-0 = <&spdif_bus_1>; 643}; 644 645&spi1 { 646 status = "okay"; 647 648 flash@0 { 649 compatible = "jedec,spi-nor"; 650 #address-cells = <1>; 651 #size-cells = <1>; 652 reg = <0>; 653 spi-max-frequency = <10000000>; 654 }; 655}; 656 657&tcphy0 { 658 status = "okay"; 659}; 660 661&tcphy1 { 662 status = "okay"; 663}; 664 665&tsadc { 666 /* tshut mode 0:CRU 1:GPIO */ 667 rockchip,hw-tshut-mode = <1>; 668 /* tshut polarity 0:LOW 1:HIGH */ 669 rockchip,hw-tshut-polarity = <1>; 670 rockchip,hw-tshut-temp = <110000>; 671 status = "okay"; 672}; 673 674&u2phy0 { 675 status = "okay"; 676 677 u2phy0_host: host-port { 678 phy-supply = <&vcc5v0_typec>; 679 status = "okay"; 680 }; 681 682 u2phy0_otg: otg-port { 683 status = "okay"; 684 }; 685}; 686 687&u2phy1 { 688 status = "okay"; 689 690 u2phy1_host: host-port { 691 phy-supply = <&vcc5v0_host>; 692 status = "okay"; 693 }; 694 695 u2phy1_otg: otg-port { 696 status = "okay"; 697 }; 698}; 699 700&uart0 { 701 pinctrl-names = "default"; 702 pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>; 703 status = "okay"; 704 705 bluetooth { 706 compatible = "brcm,bcm43438-bt"; 707 clocks = <&rk808 1>; 708 clock-names = "ext_clock"; 709 device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; 710 host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; 711 shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; 712 max-speed = <4000000>; 713 pinctrl-names = "default"; 714 pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>; 715 vbat-supply = <&vcc3v3_sys>; 716 vddio-supply = <&vcc_1v8>; 717 }; 718}; 719 720&uart2 { 721 status = "okay"; 722}; 723 724&usb_host0_ehci { 725 status = "okay"; 726}; 727 728&usb_host0_ohci { 729 status = "okay"; 730}; 731 732&usb_host1_ehci { 733 status = "okay"; 734}; 735 736&usb_host1_ohci { 737 status = "okay"; 738}; 739 740&usbdrd3_0 { 741 status = "okay"; 742}; 743 744&usbdrd_dwc3_0 { 745 status = "okay"; 746 dr_mode = "host"; 747}; 748 749&usbdrd3_1 { 750 status = "okay"; 751}; 752 753&usbdrd_dwc3_1 { 754 status = "okay"; 755 dr_mode = "host"; 756}; 757 758&vopb { 759 status = "okay"; 760}; 761 762&vopb_mmu { 763 status = "okay"; 764};