gate.S (11606B)
1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * This file contains the code that gets mapped at the upper end of each task's text 4 * region. For now, it contains the signal trampoline code only. 5 * 6 * Copyright (C) 1999-2003 Hewlett-Packard Co 7 * David Mosberger-Tang <davidm@hpl.hp.com> 8 */ 9 10 11#include <asm/asmmacro.h> 12#include <asm/errno.h> 13#include <asm/asm-offsets.h> 14#include <asm/sigcontext.h> 15#include <asm/unistd.h> 16#include <asm/kregs.h> 17#include <asm/page.h> 18#include <asm/native/inst.h> 19 20/* 21 * We can't easily refer to symbols inside the kernel. To avoid full runtime relocation, 22 * complications with the linker (which likes to create PLT stubs for branches 23 * to targets outside the shared object) and to avoid multi-phase kernel builds, we 24 * simply create minimalistic "patch lists" in special ELF sections. 25 */ 26 .section ".data..patch.fsyscall_table", "a" 27 .previous 28#define LOAD_FSYSCALL_TABLE(reg) \ 29[1:] movl reg=0; \ 30 .xdata4 ".data..patch.fsyscall_table", 1b-. 31 32 .section ".data..patch.brl_fsys_bubble_down", "a" 33 .previous 34#define BRL_COND_FSYS_BUBBLE_DOWN(pr) \ 35[1:](pr)brl.cond.sptk 0; \ 36 ;; \ 37 .xdata4 ".data..patch.brl_fsys_bubble_down", 1b-. 38 39GLOBAL_ENTRY(__kernel_syscall_via_break) 40 .prologue 41 .altrp b6 42 .body 43 /* 44 * Note: for (fast) syscall restart to work, the break instruction must be 45 * the first one in the bundle addressed by syscall_via_break. 46 */ 47{ .mib 48 break 0x100000 49 nop.i 0 50 br.ret.sptk.many b6 51} 52END(__kernel_syscall_via_break) 53 54# define ARG0_OFF (16 + IA64_SIGFRAME_ARG0_OFFSET) 55# define ARG1_OFF (16 + IA64_SIGFRAME_ARG1_OFFSET) 56# define ARG2_OFF (16 + IA64_SIGFRAME_ARG2_OFFSET) 57# define SIGHANDLER_OFF (16 + IA64_SIGFRAME_HANDLER_OFFSET) 58# define SIGCONTEXT_OFF (16 + IA64_SIGFRAME_SIGCONTEXT_OFFSET) 59 60# define FLAGS_OFF IA64_SIGCONTEXT_FLAGS_OFFSET 61# define CFM_OFF IA64_SIGCONTEXT_CFM_OFFSET 62# define FR6_OFF IA64_SIGCONTEXT_FR6_OFFSET 63# define BSP_OFF IA64_SIGCONTEXT_AR_BSP_OFFSET 64# define RNAT_OFF IA64_SIGCONTEXT_AR_RNAT_OFFSET 65# define UNAT_OFF IA64_SIGCONTEXT_AR_UNAT_OFFSET 66# define FPSR_OFF IA64_SIGCONTEXT_AR_FPSR_OFFSET 67# define PR_OFF IA64_SIGCONTEXT_PR_OFFSET 68# define RP_OFF IA64_SIGCONTEXT_IP_OFFSET 69# define SP_OFF IA64_SIGCONTEXT_R12_OFFSET 70# define RBS_BASE_OFF IA64_SIGCONTEXT_RBS_BASE_OFFSET 71# define LOADRS_OFF IA64_SIGCONTEXT_LOADRS_OFFSET 72# define base0 r2 73# define base1 r3 74 /* 75 * When we get here, the memory stack looks like this: 76 * 77 * +===============================+ 78 * | | 79 * // struct sigframe // 80 * | | 81 * +-------------------------------+ <-- sp+16 82 * | 16 byte of scratch | 83 * | space | 84 * +-------------------------------+ <-- sp 85 * 86 * The register stack looks _exactly_ the way it looked at the time the signal 87 * occurred. In other words, we're treading on a potential mine-field: each 88 * incoming general register may be a NaT value (including sp, in which case the 89 * process ends up dying with a SIGSEGV). 90 * 91 * The first thing need to do is a cover to get the registers onto the backing 92 * store. Once that is done, we invoke the signal handler which may modify some 93 * of the machine state. After returning from the signal handler, we return 94 * control to the previous context by executing a sigreturn system call. A signal 95 * handler may call the rt_sigreturn() function to directly return to a given 96 * sigcontext. However, the user-level sigreturn() needs to do much more than 97 * calling the rt_sigreturn() system call as it needs to unwind the stack to 98 * restore preserved registers that may have been saved on the signal handler's 99 * call stack. 100 */ 101 102#define SIGTRAMP_SAVES \ 103 .unwabi 3, 's'; /* mark this as a sigtramp handler (saves scratch regs) */ \ 104 .unwabi @svr4, 's'; /* backwards compatibility with old unwinders (remove in v2.7) */ \ 105 .savesp ar.unat, UNAT_OFF+SIGCONTEXT_OFF; \ 106 .savesp ar.fpsr, FPSR_OFF+SIGCONTEXT_OFF; \ 107 .savesp pr, PR_OFF+SIGCONTEXT_OFF; \ 108 .savesp rp, RP_OFF+SIGCONTEXT_OFF; \ 109 .savesp ar.pfs, CFM_OFF+SIGCONTEXT_OFF; \ 110 .vframesp SP_OFF+SIGCONTEXT_OFF 111 112GLOBAL_ENTRY(__kernel_sigtramp) 113 // describe the state that is active when we get here: 114 .prologue 115 SIGTRAMP_SAVES 116 .body 117 118 .label_state 1 119 120 adds base0=SIGHANDLER_OFF,sp 121 adds base1=RBS_BASE_OFF+SIGCONTEXT_OFF,sp 122 br.call.sptk.many rp=1f 1231: 124 ld8 r17=[base0],(ARG0_OFF-SIGHANDLER_OFF) // get pointer to signal handler's plabel 125 ld8 r15=[base1] // get address of new RBS base (or NULL) 126 cover // push args in interrupted frame onto backing store 127 ;; 128 cmp.ne p1,p0=r15,r0 // do we need to switch rbs? (note: pr is saved by kernel) 129 mov.m r9=ar.bsp // fetch ar.bsp 130 .spillsp.p p1, ar.rnat, RNAT_OFF+SIGCONTEXT_OFF 131(p1) br.cond.spnt setup_rbs // yup -> (clobbers p8, r14-r16, and r18-r20) 132back_from_setup_rbs: 133 alloc r8=ar.pfs,0,0,3,0 134 ld8 out0=[base0],16 // load arg0 (signum) 135 adds base1=(ARG1_OFF-(RBS_BASE_OFF+SIGCONTEXT_OFF)),base1 136 ;; 137 ld8 out1=[base1] // load arg1 (siginfop) 138 ld8 r10=[r17],8 // get signal handler entry point 139 ;; 140 ld8 out2=[base0] // load arg2 (sigcontextp) 141 ld8 gp=[r17] // get signal handler's global pointer 142 adds base0=(BSP_OFF+SIGCONTEXT_OFF),sp 143 ;; 144 .spillsp ar.bsp, BSP_OFF+SIGCONTEXT_OFF 145 st8 [base0]=r9 // save sc_ar_bsp 146 adds base0=(FR6_OFF+SIGCONTEXT_OFF),sp 147 adds base1=(FR6_OFF+16+SIGCONTEXT_OFF),sp 148 ;; 149 stf.spill [base0]=f6,32 150 stf.spill [base1]=f7,32 151 ;; 152 stf.spill [base0]=f8,32 153 stf.spill [base1]=f9,32 154 mov b6=r10 155 ;; 156 stf.spill [base0]=f10,32 157 stf.spill [base1]=f11,32 158 ;; 159 stf.spill [base0]=f12,32 160 stf.spill [base1]=f13,32 161 ;; 162 stf.spill [base0]=f14,32 163 stf.spill [base1]=f15,32 164 br.call.sptk.many rp=b6 // call the signal handler 165.ret0: adds base0=(BSP_OFF+SIGCONTEXT_OFF),sp 166 ;; 167 ld8 r15=[base0] // fetch sc_ar_bsp 168 mov r14=ar.bsp 169 ;; 170 cmp.ne p1,p0=r14,r15 // do we need to restore the rbs? 171(p1) br.cond.spnt restore_rbs // yup -> (clobbers r14-r18, f6 & f7) 172 ;; 173back_from_restore_rbs: 174 adds base0=(FR6_OFF+SIGCONTEXT_OFF),sp 175 adds base1=(FR6_OFF+16+SIGCONTEXT_OFF),sp 176 ;; 177 ldf.fill f6=[base0],32 178 ldf.fill f7=[base1],32 179 ;; 180 ldf.fill f8=[base0],32 181 ldf.fill f9=[base1],32 182 ;; 183 ldf.fill f10=[base0],32 184 ldf.fill f11=[base1],32 185 ;; 186 ldf.fill f12=[base0],32 187 ldf.fill f13=[base1],32 188 ;; 189 ldf.fill f14=[base0],32 190 ldf.fill f15=[base1],32 191 mov r15=__NR_rt_sigreturn 192 .restore sp // pop .prologue 193 break __BREAK_SYSCALL 194 195 .prologue 196 SIGTRAMP_SAVES 197setup_rbs: 198 mov ar.rsc=0 // put RSE into enforced lazy mode 199 ;; 200 .save ar.rnat, r19 201 mov r19=ar.rnat // save RNaT before switching backing store area 202 adds r14=(RNAT_OFF+SIGCONTEXT_OFF),sp 203 204 mov r18=ar.bspstore 205 mov ar.bspstore=r15 // switch over to new register backing store area 206 ;; 207 208 .spillsp ar.rnat, RNAT_OFF+SIGCONTEXT_OFF 209 st8 [r14]=r19 // save sc_ar_rnat 210 .body 211 mov.m r16=ar.bsp // sc_loadrs <- (new bsp - new bspstore) << 16 212 adds r14=(LOADRS_OFF+SIGCONTEXT_OFF),sp 213 ;; 214 invala 215 sub r15=r16,r15 216 extr.u r20=r18,3,6 217 ;; 218 mov ar.rsc=0xf // set RSE into eager mode, pl 3 219 cmp.eq p8,p0=63,r20 220 shl r15=r15,16 221 ;; 222 st8 [r14]=r15 // save sc_loadrs 223(p8) st8 [r18]=r19 // if bspstore points at RNaT slot, store RNaT there now 224 .restore sp // pop .prologue 225 br.cond.sptk back_from_setup_rbs 226 227 .prologue 228 SIGTRAMP_SAVES 229 .spillsp ar.rnat, RNAT_OFF+SIGCONTEXT_OFF 230 .body 231restore_rbs: 232 // On input: 233 // r14 = bsp1 (bsp at the time of return from signal handler) 234 // r15 = bsp0 (bsp at the time the signal occurred) 235 // 236 // Here, we need to calculate bspstore0, the value that ar.bspstore needs 237 // to be set to, based on bsp0 and the size of the dirty partition on 238 // the alternate stack (sc_loadrs >> 16). This can be done with the 239 // following algorithm: 240 // 241 // bspstore0 = rse_skip_regs(bsp0, -rse_num_regs(bsp1 - (loadrs >> 19), bsp1)); 242 // 243 // This is what the code below does. 244 // 245 alloc r2=ar.pfs,0,0,0,0 // alloc null frame 246 adds r16=(LOADRS_OFF+SIGCONTEXT_OFF),sp 247 adds r18=(RNAT_OFF+SIGCONTEXT_OFF),sp 248 ;; 249 ld8 r17=[r16] 250 ld8 r16=[r18] // get new rnat 251 extr.u r18=r15,3,6 // r18 <- rse_slot_num(bsp0) 252 ;; 253 mov ar.rsc=r17 // put RSE into enforced lazy mode 254 shr.u r17=r17,16 255 ;; 256 sub r14=r14,r17 // r14 (bspstore1) <- bsp1 - (sc_loadrs >> 16) 257 shr.u r17=r17,3 // r17 <- (sc_loadrs >> 19) 258 ;; 259 loadrs // restore dirty partition 260 extr.u r14=r14,3,6 // r14 <- rse_slot_num(bspstore1) 261 ;; 262 add r14=r14,r17 // r14 <- rse_slot_num(bspstore1) + (sc_loadrs >> 19) 263 ;; 264 shr.u r14=r14,6 // r14 <- (rse_slot_num(bspstore1) + (sc_loadrs >> 19))/0x40 265 ;; 266 sub r14=r14,r17 // r14 <- -rse_num_regs(bspstore1, bsp1) 267 movl r17=0x8208208208208209 268 ;; 269 add r18=r18,r14 // r18 (delta) <- rse_slot_num(bsp0) - rse_num_regs(bspstore1,bsp1) 270 setf.sig f7=r17 271 cmp.lt p7,p0=r14,r0 // p7 <- (r14 < 0)? 272 ;; 273(p7) adds r18=-62,r18 // delta -= 62 274 ;; 275 setf.sig f6=r18 276 ;; 277 xmpy.h f6=f6,f7 278 ;; 279 getf.sig r17=f6 280 ;; 281 add r17=r17,r18 282 shr r18=r18,63 283 ;; 284 shr r17=r17,5 285 ;; 286 sub r17=r17,r18 // r17 = delta/63 287 ;; 288 add r17=r14,r17 // r17 <- delta/63 - rse_num_regs(bspstore1, bsp1) 289 ;; 290 shladd r15=r17,3,r15 // r15 <- bsp0 + 8*(delta/63 - rse_num_regs(bspstore1, bsp1)) 291 ;; 292 mov ar.bspstore=r15 // switch back to old register backing store area 293 ;; 294 mov ar.rnat=r16 // restore RNaT 295 mov ar.rsc=0xf // (will be restored later on from sc_ar_rsc) 296 // invala not necessary as that will happen when returning to user-mode 297 br.cond.sptk back_from_restore_rbs 298END(__kernel_sigtramp) 299 300/* 301 * On entry: 302 * r11 = saved ar.pfs 303 * r15 = system call # 304 * b0 = saved return address 305 * b6 = return address 306 * On exit: 307 * r11 = saved ar.pfs 308 * r15 = system call # 309 * b0 = saved return address 310 * all other "scratch" registers: undefined 311 * all "preserved" registers: same as on entry 312 */ 313 314GLOBAL_ENTRY(__kernel_syscall_via_epc) 315 .prologue 316 .altrp b6 317 .body 318{ 319 /* 320 * Note: the kernel cannot assume that the first two instructions in this 321 * bundle get executed. The remaining code must be safe even if 322 * they do not get executed. 323 */ 324 adds r17=-1024,r15 // A 325 mov r10=0 // A default to successful syscall execution 326 epc // B causes split-issue 327} 328 ;; 329 RSM_PSR_BE_I(r20, r22) // M2 (5 cyc to srlz.d) 330 LOAD_FSYSCALL_TABLE(r14) // X 331 ;; 332 mov r16=IA64_KR(CURRENT) // M2 (12 cyc) 333 shladd r18=r17,3,r14 // A 334 mov r19=NR_syscalls-1 // A 335 ;; 336 lfetch [r18] // M0|1 337 MOV_FROM_PSR(p0, r29, r8) // M2 (12 cyc) 338 // If r17 is a NaT, p6 will be zero 339 cmp.geu p6,p7=r19,r17 // A (sysnr > 0 && sysnr < 1024+NR_syscalls)? 340 ;; 341 mov r21=ar.fpsr // M2 (12 cyc) 342 tnat.nz p10,p9=r15 // I0 343 mov.i r26=ar.pfs // I0 (would stall anyhow due to srlz.d...) 344 ;; 345 srlz.d // M0 (forces split-issue) ensure PSR.BE==0 346(p6) ld8 r18=[r18] // M0|1 347 nop.i 0 348 ;; 349 nop.m 0 350(p6) tbit.z.unc p8,p0=r18,0 // I0 (dual-issues with "mov b7=r18"!) 351 nop.i 0 352 ;; 353 SSM_PSR_I(p8, p14, r25) 354(p6) mov b7=r18 // I0 355(p8) br.dptk.many b7 // B 356 357 mov r27=ar.rsc // M2 (12 cyc) 358/* 359 * brl.cond doesn't work as intended because the linker would convert this branch 360 * into a branch to a PLT. Perhaps there will be a way to avoid this with some 361 * future version of the linker. In the meantime, we just use an indirect branch 362 * instead. 363 */ 364#ifdef CONFIG_ITANIUM 365(p6) add r14=-8,r14 // r14 <- addr of fsys_bubble_down entry 366 ;; 367(p6) ld8 r14=[r14] // r14 <- fsys_bubble_down 368 ;; 369(p6) mov b7=r14 370(p6) br.sptk.many b7 371#else 372 BRL_COND_FSYS_BUBBLE_DOWN(p6) 373#endif 374 SSM_PSR_I(p0, p14, r10) 375 mov r10=-1 376(p10) mov r8=EINVAL 377(p9) mov r8=ENOSYS 378 FSYS_RETURN 379 380END(__kernel_syscall_via_epc)