copy_page_mck.S (5959B)
1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * McKinley-optimized version of copy_page(). 4 * 5 * Copyright (C) 2002 Hewlett-Packard Co 6 * David Mosberger <davidm@hpl.hp.com> 7 * 8 * Inputs: 9 * in0: address of target page 10 * in1: address of source page 11 * Output: 12 * no return value 13 * 14 * General idea: 15 * - use regular loads and stores to prefetch data to avoid consuming M-slot just for 16 * lfetches => good for in-cache performance 17 * - avoid l2 bank-conflicts by not storing into the same 16-byte bank within a single 18 * cycle 19 * 20 * Principle of operation: 21 * First, note that L1 has a line-size of 64 bytes and L2 a line-size of 128 bytes. 22 * To avoid secondary misses in L2, we prefetch both source and destination with a line-size 23 * of 128 bytes. When both of these lines are in the L2 and the first half of the 24 * source line is in L1, we start copying the remaining words. The second half of the 25 * source line is prefetched in an earlier iteration, so that by the time we start 26 * accessing it, it's also present in the L1. 27 * 28 * We use a software-pipelined loop to control the overall operation. The pipeline 29 * has 2*PREFETCH_DIST+K stages. The first PREFETCH_DIST stages are used for prefetching 30 * source cache-lines. The second PREFETCH_DIST stages are used for prefetching destination 31 * cache-lines, the last K stages are used to copy the cache-line words not copied by 32 * the prefetches. The four relevant points in the pipelined are called A, B, C, D: 33 * p[A] is TRUE if a source-line should be prefetched, p[B] is TRUE if a destination-line 34 * should be prefetched, p[C] is TRUE if the second half of an L2 line should be brought 35 * into L1D and p[D] is TRUE if a cacheline needs to be copied. 36 * 37 * This all sounds very complicated, but thanks to the modulo-scheduled loop support, 38 * the resulting code is very regular and quite easy to follow (once you get the idea). 39 * 40 * As a secondary optimization, the first 2*PREFETCH_DIST iterations are implemented 41 * as the separate .prefetch_loop. Logically, this loop performs exactly like the 42 * main-loop (.line_copy), but has all known-to-be-predicated-off instructions removed, 43 * so that each loop iteration is faster (again, good for cached case). 44 * 45 * When reading the code, it helps to keep the following picture in mind: 46 * 47 * word 0 word 1 48 * +------+------+--- 49 * | v[x] | t1 | ^ 50 * | t2 | t3 | | 51 * | t4 | t5 | | 52 * | t6 | t7 | | 128 bytes 53 * | n[y] | t9 | | (L2 cache line) 54 * | t10 | t11 | | 55 * | t12 | t13 | | 56 * | t14 | t15 | v 57 * +------+------+--- 58 * 59 * Here, v[x] is copied by the (memory) prefetch. n[y] is loaded at p[C] 60 * to fetch the second-half of the L2 cache line into L1, and the tX words are copied in 61 * an order that avoids bank conflicts. 62 */ 63#include <asm/asmmacro.h> 64#include <asm/page.h> 65#include <asm/export.h> 66 67#define PREFETCH_DIST 8 // McKinley sustains 16 outstanding L2 misses (8 ld, 8 st) 68 69#define src0 r2 70#define src1 r3 71#define dst0 r9 72#define dst1 r10 73#define src_pre_mem r11 74#define dst_pre_mem r14 75#define src_pre_l2 r15 76#define dst_pre_l2 r16 77#define t1 r17 78#define t2 r18 79#define t3 r19 80#define t4 r20 81#define t5 t1 // alias! 82#define t6 t2 // alias! 83#define t7 t3 // alias! 84#define t9 t5 // alias! 85#define t10 t4 // alias! 86#define t11 t7 // alias! 87#define t12 t6 // alias! 88#define t14 t10 // alias! 89#define t13 r21 90#define t15 r22 91 92#define saved_lc r23 93#define saved_pr r24 94 95#define A 0 96#define B (PREFETCH_DIST) 97#define C (B + PREFETCH_DIST) 98#define D (C + 3) 99#define N (D + 1) 100#define Nrot ((N + 7) & ~7) 101 102GLOBAL_ENTRY(copy_page) 103 .prologue 104 alloc r8 = ar.pfs, 2, Nrot-2, 0, Nrot 105 106 .rotr v[2*PREFETCH_DIST], n[D-C+1] 107 .rotp p[N] 108 109 .save ar.lc, saved_lc 110 mov saved_lc = ar.lc 111 .save pr, saved_pr 112 mov saved_pr = pr 113 .body 114 115 mov src_pre_mem = in1 116 mov pr.rot = 0x10000 117 mov ar.ec = 1 // special unrolled loop 118 119 mov dst_pre_mem = in0 120 mov ar.lc = 2*PREFETCH_DIST - 1 121 122 add src_pre_l2 = 8*8, in1 123 add dst_pre_l2 = 8*8, in0 124 add src0 = 8, in1 // first t1 src 125 add src1 = 3*8, in1 // first t3 src 126 add dst0 = 8, in0 // first t1 dst 127 add dst1 = 3*8, in0 // first t3 dst 128 mov t1 = (PAGE_SIZE/128) - (2*PREFETCH_DIST) - 1 129 nop.m 0 130 nop.i 0 131 ;; 132 // same as .line_copy loop, but with all predicated-off instructions removed: 133.prefetch_loop: 134(p[A]) ld8 v[A] = [src_pre_mem], 128 // M0 135(p[B]) st8 [dst_pre_mem] = v[B], 128 // M2 136 br.ctop.sptk .prefetch_loop 137 ;; 138 cmp.eq p16, p0 = r0, r0 // reset p16 to 1 (br.ctop cleared it to zero) 139 mov ar.lc = t1 // with 64KB pages, t1 is too big to fit in 8 bits! 140 mov ar.ec = N // # of stages in pipeline 141 ;; 142.line_copy: 143(p[D]) ld8 t2 = [src0], 3*8 // M0 144(p[D]) ld8 t4 = [src1], 3*8 // M1 145(p[B]) st8 [dst_pre_mem] = v[B], 128 // M2 prefetch dst from memory 146(p[D]) st8 [dst_pre_l2] = n[D-C], 128 // M3 prefetch dst from L2 147 ;; 148(p[A]) ld8 v[A] = [src_pre_mem], 128 // M0 prefetch src from memory 149(p[C]) ld8 n[0] = [src_pre_l2], 128 // M1 prefetch src from L2 150(p[D]) st8 [dst0] = t1, 8 // M2 151(p[D]) st8 [dst1] = t3, 8 // M3 152 ;; 153(p[D]) ld8 t5 = [src0], 8 154(p[D]) ld8 t7 = [src1], 3*8 155(p[D]) st8 [dst0] = t2, 3*8 156(p[D]) st8 [dst1] = t4, 3*8 157 ;; 158(p[D]) ld8 t6 = [src0], 3*8 159(p[D]) ld8 t10 = [src1], 8 160(p[D]) st8 [dst0] = t5, 8 161(p[D]) st8 [dst1] = t7, 3*8 162 ;; 163(p[D]) ld8 t9 = [src0], 3*8 164(p[D]) ld8 t11 = [src1], 3*8 165(p[D]) st8 [dst0] = t6, 3*8 166(p[D]) st8 [dst1] = t10, 8 167 ;; 168(p[D]) ld8 t12 = [src0], 8 169(p[D]) ld8 t14 = [src1], 8 170(p[D]) st8 [dst0] = t9, 3*8 171(p[D]) st8 [dst1] = t11, 3*8 172 ;; 173(p[D]) ld8 t13 = [src0], 4*8 174(p[D]) ld8 t15 = [src1], 4*8 175(p[D]) st8 [dst0] = t12, 8 176(p[D]) st8 [dst1] = t14, 8 177 ;; 178(p[D-1])ld8 t1 = [src0], 8 179(p[D-1])ld8 t3 = [src1], 8 180(p[D]) st8 [dst0] = t13, 4*8 181(p[D]) st8 [dst1] = t15, 4*8 182 br.ctop.sptk .line_copy 183 ;; 184 mov ar.lc = saved_lc 185 mov pr = saved_pr, -1 186 br.ret.sptk.many rp 187END(copy_page) 188EXPORT_SYMBOL(copy_page)