head.S (8421B)
1/* SPDX-License-Identifier: GPL-2.0 */ 2/* 3 * head.S - Common startup code for 68000 core based CPU's 4 * 5 * 2012.10.21, Luis Alves <ljalvs@gmail.com>, Single head.S file for all 6 * 68000 core based CPU's. Based on the sources from: 7 * Coldfire by Greg Ungerer <gerg@snapgear.com> 8 * 68328 by D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, 9 * Kenneth Albanowski <kjahds@kjahds.com>, 10 * The Silver Hammer Group, Ltd. 11 * 12 */ 13 14#include <linux/linkage.h> 15#include <linux/init.h> 16#include <asm/asm-offsets.h> 17#include <asm/thread_info.h> 18 19 20/***************************************************************************** 21 * UCSIMM and UCDIMM use CONFIG_MEMORY_RESERVE to reserve some RAM 22 *****************************************************************************/ 23#ifdef CONFIG_MEMORY_RESERVE 24#define RAMEND (CONFIG_RAMBASE+CONFIG_RAMSIZE)-(CONFIG_MEMORY_RESERVE*0x100000) 25#else 26#define RAMEND (CONFIG_RAMBASE+CONFIG_RAMSIZE) 27#endif 28/*****************************************************************************/ 29 30.global _start 31.global _rambase 32.global _ramvec 33.global _ramstart 34.global _ramend 35 36#if defined(CONFIG_PILOT) || defined(CONFIG_INIT_LCD) 37.global bootlogo_bits 38#endif 39 40/* Defining DEBUG_HEAD_CODE, serial port in 68x328 is inited */ 41/* #define DEBUG_HEAD_CODE */ 42#undef DEBUG_HEAD_CODE 43 44.data 45 46/***************************************************************************** 47 * RAM setup pointers. Used by the kernel to determine RAM location and size. 48 *****************************************************************************/ 49 50_rambase: 51 .long 0 52_ramvec: 53 .long 0 54_ramstart: 55 .long 0 56_ramend: 57 .long 0 58 59__HEAD 60 61/***************************************************************************** 62 * Entry point, where all begins! 63 *****************************************************************************/ 64 65_start: 66 67/* Pilot need this specific signature at the start of ROM */ 68#ifdef CONFIG_PILOT 69 .byte 0x4e, 0xfa, 0x00, 0x0a /* bra opcode (jmp 10 bytes) */ 70 .byte 'b', 'o', 'o', 't' 71 .word 10000 72 nop 73 moveq #0, %d0 74 movew %d0, 0xfffff618 /* Watchdog off */ 75 movel #0x00011f07, 0xfffff114 /* CS A1 Mask */ 76#endif /* CONFIG_PILOT */ 77 78 movew #0x2700, %sr /* disable all interrupts */ 79 80/***************************************************************************** 81 * Setup PLL and wait for it to settle (in 68x328 cpu's). 82 * Also, if enabled, init serial port. 83 *****************************************************************************/ 84#if defined(CONFIG_M68328) || \ 85 defined(CONFIG_M68EZ328) || \ 86 defined(CONFIG_M68VZ328) 87 88/* Serial port setup. Should only be needed if debugging this startup code. */ 89#ifdef DEBUG_HEAD_CODE 90 movew #0x0800, 0xfffff906 /* Ignore CTS */ 91 movew #0x010b, 0xfffff902 /* BAUD to 9600 */ 92 movew #0xe100, 0xfffff900 /* enable */ 93#endif /* DEBUG_HEAD */ 94 95#ifdef CONFIG_PILOT 96 movew #0x2410, 0xfffff200 /* PLLCR */ 97#else 98 movew #0x2400, 0xfffff200 /* PLLCR */ 99#endif 100 movew #0x0123, 0xfffff202 /* PLLFSR */ 101 moveq #0, %d0 102 movew #16384, %d0 /* PLL settle wait loop */ 103_pll_settle: 104 subw #1, %d0 105 bne _pll_settle 106#endif /* CONFIG_M68x328 */ 107 108 109/***************************************************************************** 110 * If running kernel from ROM some specific initialization has to be done. 111 * (Assuming that everything is already init'ed when running from RAM) 112 *****************************************************************************/ 113#ifdef CONFIG_ROMKERNEL 114 115/***************************************************************************** 116 * Init chip registers (uCsimm specific) 117 *****************************************************************************/ 118#ifdef CONFIG_UCSIMM 119 moveb #0x00, 0xfffffb0b /* Watchdog off */ 120 moveb #0x10, 0xfffff000 /* SCR */ 121 moveb #0x00, 0xfffff40b /* enable chip select */ 122 moveb #0x00, 0xfffff423 /* enable /DWE */ 123 moveb #0x08, 0xfffffd0d /* disable hardmap */ 124 moveb #0x07, 0xfffffd0e /* level 7 interrupt clear */ 125 movew #0x8600, 0xfffff100 /* FLASH at 0x10c00000 */ 126 movew #0x018b, 0xfffff110 /* 2Meg, enable, 0ws */ 127 movew #0x8f00, 0xfffffc00 /* DRAM configuration */ 128 movew #0x9667, 0xfffffc02 /* DRAM control */ 129 movew #0x0000, 0xfffff106 /* DRAM at 0x00000000 */ 130 movew #0x068f, 0xfffff116 /* 8Meg, enable, 0ws */ 131 moveb #0x40, 0xfffff300 /* IVR */ 132 movel #0x007FFFFF, %d0 /* IMR */ 133 movel %d0, 0xfffff304 134 moveb 0xfffff42b, %d0 135 andb #0xe0, %d0 136 moveb %d0, 0xfffff42b 137#endif 138 139/***************************************************************************** 140 * Init LCD controller. 141 * (Assuming that LCD controller is already init'ed when running from RAM) 142 *****************************************************************************/ 143#ifdef CONFIG_INIT_LCD 144#ifdef CONFIG_PILOT 145 moveb #0, 0xfffffA27 /* LCKCON */ 146 movel #_start, 0xfffffA00 /* LSSA */ 147 moveb #0xa, 0xfffffA05 /* LVPW */ 148 movew #0x9f, 0xFFFFFa08 /* LXMAX */ 149 movew #0x9f, 0xFFFFFa0a /* LYMAX */ 150 moveb #9, 0xfffffa29 /* LBAR */ 151 moveb #0, 0xfffffa25 /* LPXCD */ 152 moveb #0x04, 0xFFFFFa20 /* LPICF */ 153 moveb #0x58, 0xfffffA27 /* LCKCON */ 154 moveb #0x85, 0xfffff429 /* PFDATA */ 155 moveb #0xd8, 0xfffffA27 /* LCKCON */ 156 moveb #0xc5, 0xfffff429 /* PFDATA */ 157 moveb #0xd5, 0xfffff429 /* PFDATA */ 158 movel #bootlogo_bits, 0xFFFFFA00 /* LSSA */ 159 moveb #10, 0xFFFFFA05 /* LVPW */ 160 movew #160, 0xFFFFFA08 /* LXMAX */ 161 movew #160, 0xFFFFFA0A /* LYMAX */ 162#else /* CONFIG_PILOT */ 163 movel #bootlogo_bits, 0xfffffA00 /* LSSA */ 164 moveb #0x28, 0xfffffA05 /* LVPW */ 165 movew #0x280, 0xFFFFFa08 /* LXMAX */ 166 movew #0x1df, 0xFFFFFa0a /* LYMAX */ 167 moveb #0, 0xfffffa29 /* LBAR */ 168 moveb #0, 0xfffffa25 /* LPXCD */ 169 moveb #0x08, 0xFFFFFa20 /* LPICF */ 170 moveb #0x01, 0xFFFFFA21 /* -ve pol */ 171 moveb #0x81, 0xfffffA27 /* LCKCON */ 172 movew #0xff00, 0xfffff412 /* LCD pins */ 173#endif /* CONFIG_PILOT */ 174#endif /* CONFIG_INIT_LCD */ 175 176/***************************************************************************** 177 * Kernel is running from FLASH/ROM (XIP) 178 * Copy init text & data to RAM 179 *****************************************************************************/ 180 moveal #_etext, %a0 181 moveal #_sdata, %a1 182 moveal #__bss_start, %a2 183_copy_initmem: 184 movel %a0@+, %a1@+ 185 cmpal %a1, %a2 186 bhi _copy_initmem 187#endif /* CONFIG_ROMKERNEL */ 188 189/***************************************************************************** 190 * Setup basic memory information for kernel 191 *****************************************************************************/ 192 movel #CONFIG_VECTORBASE,_ramvec /* set vector base location */ 193 movel #CONFIG_RAMBASE,_rambase /* set the base of RAM */ 194 movel #RAMEND, _ramend /* set end ram addr */ 195 lea __bss_stop,%a1 196 movel %a1,_ramstart 197 198/***************************************************************************** 199 * If the kernel is in RAM, move romfs to right above bss and 200 * adjust _ramstart to where romfs ends. 201 * 202 * (Do this only if CONFIG_MTD_UCLINUX is true) 203 *****************************************************************************/ 204 205#if defined(CONFIG_ROMFS_FS) && defined(CONFIG_RAMKERNEL) && \ 206 defined(CONFIG_MTD_UCLINUX) 207 lea __bss_start, %a0 /* get start of bss */ 208 lea __bss_stop, %a1 /* set up destination */ 209 movel %a0, %a2 /* copy of bss start */ 210 211 movel 8(%a0), %d0 /* get size of ROMFS */ 212 addql #8, %d0 /* allow for rounding */ 213 andl #0xfffffffc, %d0 /* whole words */ 214 215 addl %d0, %a0 /* copy from end */ 216 addl %d0, %a1 /* copy from end */ 217 movel %a1, _ramstart /* set start of ram */ 218_copy_romfs: 219 movel -(%a0), -(%a1) /* copy dword */ 220 cmpl %a0, %a2 /* check if at end */ 221 bne _copy_romfs 222#endif /* CONFIG_ROMFS_FS && CONFIG_RAMKERNEL && CONFIG_MTD_UCLINUX */ 223 224/***************************************************************************** 225 * Clear bss region 226 *****************************************************************************/ 227 lea __bss_start, %a0 /* get start of bss */ 228 lea __bss_stop, %a1 /* get end of bss */ 229_clear_bss: 230 movel #0, (%a0)+ /* clear each word */ 231 cmpl %a0, %a1 /* check if at end */ 232 bne _clear_bss 233 234/***************************************************************************** 235 * Load the current task pointer and stack. 236 *****************************************************************************/ 237 lea init_thread_union,%a0 238 lea THREAD_SIZE(%a0),%sp 239 jsr start_kernel /* start Linux kernel */ 240_exit: 241 jmp _exit /* should never get here */