Kconfig.devices (4468B)
1# SPDX-License-Identifier: GPL-2.0 2if MMU 3 4config ARCH_MAY_HAVE_PC_FDC 5 bool 6 depends on BROKEN && (Q40 || SUN3X) 7 default y 8 9menu "Platform devices" 10 11config HEARTBEAT 12 bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40 13 default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300 14 help 15 Use the power-on LED on your machine as a load meter. The exact 16 behavior is platform-dependent, but normally the flash frequency is 17 a hyperbolic function of the 5-minute load average. 18 19# We have a dedicated heartbeat LED. :-) 20config PROC_HARDWARE 21 bool "/proc/hardware support" 22 help 23 Say Y here to support the /proc/hardware file, which gives you 24 access to information about the machine you're running on, 25 including the model, CPU, MMU, clock speed, BogoMIPS rating, 26 and memory size. 27 28config NATFEAT 29 bool "ARAnyM emulator support" 30 depends on ATARI 31 help 32 This option enables support for ARAnyM native features, such as 33 access to a disk image as /dev/hda. 34 35config NFBLOCK 36 tristate "NatFeat block device support" 37 depends on BLOCK && NATFEAT 38 help 39 Say Y to include support for the ARAnyM NatFeat block device 40 which allows direct access to the hard drives without using 41 the hardware emulation. 42 43config NFCON 44 tristate "NatFeat console driver" 45 depends on TTY && NATFEAT 46 help 47 Say Y to include support for the ARAnyM NatFeat console driver 48 which allows the console output to be redirected to the stderr 49 output of ARAnyM. 50 51config NFETH 52 tristate "NatFeat Ethernet support" 53 depends on ETHERNET && NATFEAT 54 help 55 Say Y to include support for the ARAnyM NatFeat network device 56 which will emulate a regular ethernet device while presenting an 57 ethertap device to the host system. 58 59config ATARI_ETHERNAT 60 bool "Atari EtherNAT Ethernet support" 61 depends on ATARI 62 help 63 Say Y to include support for the EtherNAT network adapter for the 64 CT/60 extension port. 65 66 To compile the actual ethernet driver, choose Y or M for the SMC91X 67 option in the network device section; the module will be called smc91x. 68 69config ATARI_ETHERNEC 70 bool "Atari EtherNEC Ethernet support" 71 depends on ATARI_ROM_ISA 72 help 73 Say Y to include support for the EtherNEC network adapter for the 74 ROM port. The driver works by polling instead of interrupts, so it 75 is quite slow. 76 77 This driver also supports the ethernet part of the NetUSBee ROM 78 port combined Ethernet/USB adapter. 79 80 To compile the actual ethernet driver, choose Y or M in for the NE2000 81 option in the network device section; the module will be called ne. 82 83endmenu 84 85menu "Character devices" 86 87config ATARI_DSP56K 88 tristate "Atari DSP56k support" 89 depends on ATARI 90 help 91 If you want to be able to use the DSP56001 in Falcons, say Y. This 92 driver is still experimental, and if you don't know what it is, or 93 if you don't have this processor, just say N. 94 95 To compile this driver as a module, choose M here. 96 97config AMIGA_BUILTIN_SERIAL 98 tristate "Amiga builtin serial support" 99 depends on AMIGA && TTY 100 help 101 If you want to use your Amiga's built-in serial port in Linux, 102 answer Y. 103 104 To compile this driver as a module, choose M here. 105 106config HPDCA 107 tristate "HP DCA serial support" 108 depends on DIO && SERIAL_8250 109 help 110 If you want to use the internal "DCA" serial ports on an HP300 111 machine, say Y here. 112 113config HPAPCI 114 tristate "HP APCI serial support" 115 depends on HP300 && SERIAL_8250 116 help 117 If you want to use the internal "APCI" serial ports on an HP400 118 machine, say Y here. 119 120config SERIAL_CONSOLE 121 bool "Support for serial port console" 122 depends on AMIGA_BUILTIN_SERIAL=y 123 help 124 If you say Y here, it will be possible to use a serial port as the 125 system console (the system console is the device which receives all 126 kernel messages and warnings and which allows logins in single user 127 mode). This could be useful if some terminal or printer is connected 128 to that serial port. 129 130 Even if you say Y here, the currently visible virtual console 131 (/dev/tty0) will still be used as the system console by default, but 132 you can alter that using a kernel command line option such as 133 "console=ttyS1". (Try "man bootparam" or see the documentation of 134 your boot loader about how to pass options to the kernel at boot 135 time.) 136 137 If you don't have a graphical console and you say Y here, the 138 kernel will automatically use the first serial line, /dev/ttyS0, as 139 system console. 140 141 If unsure, say N. 142 143endmenu 144 145endif