x_operr.S (9807B)
1| 2| x_operr.sa 3.5 7/1/91 3| 4| fpsp_operr --- FPSP handler for operand error exception 5| 6| See 68040 User's Manual pp. 9-44f 7| 8| Note 1: For trap disabled 040 does the following: 9| If the dest is a fp reg, then an extended precision non_signaling 10| NAN is stored in the dest reg. If the dest format is b, w, or l and 11| the source op is a NAN, then garbage is stored as the result (actually 12| the upper 32 bits of the mantissa are sent to the integer unit). If 13| the dest format is integer (b, w, l) and the operr is caused by 14| integer overflow, or the source op is inf, then the result stored is 15| garbage. 16| There are three cases in which operr is incorrectly signaled on the 17| 040. This occurs for move_out of format b, w, or l for the largest 18| negative integer (-2^7 for b, -2^15 for w, -2^31 for l). 19| 20| On opclass = 011 fmove.(b,w,l) that causes a conversion 21| overflow -> OPERR, the exponent in wbte (and fpte) is: 22| byte 56 - (62 - exp) 23| word 48 - (62 - exp) 24| long 32 - (62 - exp) 25| 26| where exp = (true exp) - 1 27| 28| So, wbtemp and fptemp will contain the following on erroneously 29| signalled operr: 30| fpts = 1 31| fpte = $4000 (15 bit externally) 32| byte fptm = $ffffffff ffffff80 33| word fptm = $ffffffff ffff8000 34| long fptm = $ffffffff 80000000 35| 36| Note 2: For trap enabled 040 does the following: 37| If the inst is move_out, then same as Note 1. 38| If the inst is not move_out, the dest is not modified. 39| The exceptional operand is not defined for integer overflow 40| during a move_out. 41| 42 43| Copyright (C) Motorola, Inc. 1990 44| All Rights Reserved 45| 46| For details on the license for this file, please see the 47| file, README, in this same directory. 48 49X_OPERR: |idnt 2,1 | Motorola 040 Floating Point Software Package 50 51 |section 8 52 53#include "fpsp.h" 54 55 |xref mem_write 56 |xref real_operr 57 |xref real_inex 58 |xref get_fline 59 |xref fpsp_done 60 |xref reg_dest 61 62 .global fpsp_operr 63fpsp_operr: 64| 65 link %a6,#-LOCAL_SIZE 66 fsave -(%a7) 67 moveml %d0-%d1/%a0-%a1,USER_DA(%a6) 68 fmovemx %fp0-%fp3,USER_FP0(%a6) 69 fmoveml %fpcr/%fpsr/%fpiar,USER_FPCR(%a6) 70 71| 72| Check if this is an opclass 3 instruction. 73| If so, fall through, else branch to operr_end 74| 75 btstb #TFLAG,T_BYTE(%a6) 76 beqs operr_end 77 78| 79| If the destination size is B,W,or L, the operr must be 80| handled here. 81| 82 movel CMDREG1B(%a6),%d0 83 bfextu %d0{#3:#3},%d0 |0=long, 4=word, 6=byte 84 cmpib #0,%d0 |determine size; check long 85 beq operr_long 86 cmpib #4,%d0 |check word 87 beq operr_word 88 cmpib #6,%d0 |check byte 89 beq operr_byte 90 91| 92| The size is not B,W,or L, so the operr is handled by the 93| kernel handler. Set the operr bits and clean up, leaving 94| only the integer exception frame on the stack, and the 95| fpu in the original exceptional state. 96| 97operr_end: 98 bsetb #operr_bit,FPSR_EXCEPT(%a6) 99 bsetb #aiop_bit,FPSR_AEXCEPT(%a6) 100 101 moveml USER_DA(%a6),%d0-%d1/%a0-%a1 102 fmovemx USER_FP0(%a6),%fp0-%fp3 103 fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar 104 frestore (%a7)+ 105 unlk %a6 106 bral real_operr 107 108operr_long: 109 moveql #4,%d1 |write size to d1 110 moveb STAG(%a6),%d0 |test stag for nan 111 andib #0xe0,%d0 |clr all but tag 112 cmpib #0x60,%d0 |check for nan 113 beq operr_nan 114 cmpil #0x80000000,FPTEMP_LO(%a6) |test if ls lword is special 115 bnes chklerr |if not equal, check for incorrect operr 116 bsr check_upper |check if exp and ms mant are special 117 tstl %d0 118 bnes chklerr |if d0 is true, check for incorrect operr 119 movel #0x80000000,%d0 |store special case result 120 bsr operr_store 121 bra not_enabled |clean and exit 122| 123| CHECK FOR INCORRECTLY GENERATED OPERR EXCEPTION HERE 124| 125chklerr: 126 movew FPTEMP_EX(%a6),%d0 127 andw #0x7FFF,%d0 |ignore sign bit 128 cmpw #0x3FFE,%d0 |this is the only possible exponent value 129 bnes chklerr2 130fixlong: 131 movel FPTEMP_LO(%a6),%d0 132 bsr operr_store 133 bra not_enabled 134chklerr2: 135 movew FPTEMP_EX(%a6),%d0 136 andw #0x7FFF,%d0 |ignore sign bit 137 cmpw #0x4000,%d0 138 bcc store_max |exponent out of range 139 140 movel FPTEMP_LO(%a6),%d0 141 andl #0x7FFF0000,%d0 |look for all 1's on bits 30-16 142 cmpl #0x7FFF0000,%d0 143 beqs fixlong 144 145 tstl FPTEMP_LO(%a6) 146 bpls chklepos 147 cmpl #0xFFFFFFFF,FPTEMP_HI(%a6) 148 beqs fixlong 149 bra store_max 150chklepos: 151 tstl FPTEMP_HI(%a6) 152 beqs fixlong 153 bra store_max 154 155operr_word: 156 moveql #2,%d1 |write size to d1 157 moveb STAG(%a6),%d0 |test stag for nan 158 andib #0xe0,%d0 |clr all but tag 159 cmpib #0x60,%d0 |check for nan 160 beq operr_nan 161 cmpil #0xffff8000,FPTEMP_LO(%a6) |test if ls lword is special 162 bnes chkwerr |if not equal, check for incorrect operr 163 bsr check_upper |check if exp and ms mant are special 164 tstl %d0 165 bnes chkwerr |if d0 is true, check for incorrect operr 166 movel #0x80000000,%d0 |store special case result 167 bsr operr_store 168 bra not_enabled |clean and exit 169| 170| CHECK FOR INCORRECTLY GENERATED OPERR EXCEPTION HERE 171| 172chkwerr: 173 movew FPTEMP_EX(%a6),%d0 174 andw #0x7FFF,%d0 |ignore sign bit 175 cmpw #0x3FFE,%d0 |this is the only possible exponent value 176 bnes store_max 177 movel FPTEMP_LO(%a6),%d0 178 swap %d0 179 bsr operr_store 180 bra not_enabled 181 182operr_byte: 183 moveql #1,%d1 |write size to d1 184 moveb STAG(%a6),%d0 |test stag for nan 185 andib #0xe0,%d0 |clr all but tag 186 cmpib #0x60,%d0 |check for nan 187 beqs operr_nan 188 cmpil #0xffffff80,FPTEMP_LO(%a6) |test if ls lword is special 189 bnes chkberr |if not equal, check for incorrect operr 190 bsr check_upper |check if exp and ms mant are special 191 tstl %d0 192 bnes chkberr |if d0 is true, check for incorrect operr 193 movel #0x80000000,%d0 |store special case result 194 bsr operr_store 195 bra not_enabled |clean and exit 196| 197| CHECK FOR INCORRECTLY GENERATED OPERR EXCEPTION HERE 198| 199chkberr: 200 movew FPTEMP_EX(%a6),%d0 201 andw #0x7FFF,%d0 |ignore sign bit 202 cmpw #0x3FFE,%d0 |this is the only possible exponent value 203 bnes store_max 204 movel FPTEMP_LO(%a6),%d0 205 asll #8,%d0 206 swap %d0 207 bsr operr_store 208 bra not_enabled 209 210| 211| This operr condition is not of the special case. Set operr 212| and aiop and write the portion of the nan to memory for the 213| given size. 214| 215operr_nan: 216 orl #opaop_mask,USER_FPSR(%a6) |set operr & aiop 217 218 movel ETEMP_HI(%a6),%d0 |output will be from upper 32 bits 219 bsr operr_store 220 bra end_operr 221| 222| Store_max loads the max pos or negative for the size, sets 223| the operr and aiop bits, and clears inex and ainex, incorrectly 224| set by the 040. 225| 226store_max: 227 orl #opaop_mask,USER_FPSR(%a6) |set operr & aiop 228 bclrb #inex2_bit,FPSR_EXCEPT(%a6) 229 bclrb #ainex_bit,FPSR_AEXCEPT(%a6) 230 fmovel #0,%FPSR 231 232 tstw FPTEMP_EX(%a6) |check sign 233 blts load_neg 234 movel #0x7fffffff,%d0 235 bsr operr_store 236 bra end_operr 237load_neg: 238 movel #0x80000000,%d0 239 bsr operr_store 240 bra end_operr 241 242| 243| This routine stores the data in d0, for the given size in d1, 244| to memory or data register as required. A read of the fline 245| is required to determine the destination. 246| 247operr_store: 248 movel %d0,L_SCR1(%a6) |move write data to L_SCR1 249 movel %d1,-(%a7) |save register size 250 bsrl get_fline |fline returned in d0 251 movel (%a7)+,%d1 252 bftst %d0{#26:#3} |if mode is zero, dest is Dn 253 bnes dest_mem 254| 255| Destination is Dn. Get register number from d0. Data is on 256| the stack at (a7). D1 has size: 1=byte,2=word,4=long/single 257| 258 andil #7,%d0 |isolate register number 259 cmpil #4,%d1 260 beqs op_long |the most frequent case 261 cmpil #2,%d1 262 bnes op_con 263 orl #8,%d0 264 bras op_con 265op_long: 266 orl #0x10,%d0 267op_con: 268 movel %d0,%d1 |format size:reg for reg_dest 269 bral reg_dest |call to reg_dest returns to caller 270| ;of operr_store 271| 272| Destination is memory. Get <ea> from integer exception frame 273| and call mem_write. 274| 275dest_mem: 276 leal L_SCR1(%a6),%a0 |put ptr to write data in a0 277 movel EXC_EA(%a6),%a1 |put user destination address in a1 278 movel %d1,%d0 |put size in d0 279 bsrl mem_write 280 rts 281| 282| Check the exponent for $c000 and the upper 32 bits of the 283| mantissa for $ffffffff. If both are true, return d0 clr 284| and store the lower n bits of the least lword of FPTEMP 285| to d0 for write out. If not, it is a real operr, and set d0. 286| 287check_upper: 288 cmpil #0xffffffff,FPTEMP_HI(%a6) |check if first byte is all 1's 289 bnes true_operr |if not all 1's then was true operr 290 cmpiw #0xc000,FPTEMP_EX(%a6) |check if incorrectly signalled 291 beqs not_true_operr |branch if not true operr 292 cmpiw #0xbfff,FPTEMP_EX(%a6) |check if incorrectly signalled 293 beqs not_true_operr |branch if not true operr 294true_operr: 295 movel #1,%d0 |signal real operr 296 rts 297not_true_operr: 298 clrl %d0 |signal no real operr 299 rts 300 301| 302| End_operr tests for operr enabled. If not, it cleans up the stack 303| and does an rte. If enabled, it cleans up the stack and branches 304| to the kernel operr handler with only the integer exception 305| frame on the stack and the fpu in the original exceptional state 306| with correct data written to the destination. 307| 308end_operr: 309 btstb #operr_bit,FPCR_ENABLE(%a6) 310 beqs not_enabled 311enabled: 312 moveml USER_DA(%a6),%d0-%d1/%a0-%a1 313 fmovemx USER_FP0(%a6),%fp0-%fp3 314 fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar 315 frestore (%a7)+ 316 unlk %a6 317 bral real_operr 318 319not_enabled: 320| 321| It is possible to have either inex2 or inex1 exceptions with the 322| operr. If the inex enable bit is set in the FPCR, and either 323| inex2 or inex1 occurred, we must clean up and branch to the 324| real inex handler. 325| 326ck_inex: 327 moveb FPCR_ENABLE(%a6),%d0 328 andb FPSR_EXCEPT(%a6),%d0 329 andib #0x3,%d0 330 beq operr_exit 331| 332| Inexact enabled and reported, and we must take an inexact exception. 333| 334take_inex: 335 moveb #INEX_VEC,EXC_VEC+1(%a6) 336 movel USER_FPSR(%a6),FPSR_SHADOW(%a6) 337 orl #sx_mask,E_BYTE(%a6) 338 moveml USER_DA(%a6),%d0-%d1/%a0-%a1 339 fmovemx USER_FP0(%a6),%fp0-%fp3 340 fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar 341 frestore (%a7)+ 342 unlk %a6 343 bral real_inex 344| 345| Since operr is only an E1 exception, there is no need to frestore 346| any state back to the fpu. 347| 348operr_exit: 349 moveml USER_DA(%a6),%d0-%d1/%a0-%a1 350 fmovemx USER_FP0(%a6),%fp0-%fp3 351 fmoveml USER_FPCR(%a6),%fpcr/%fpsr/%fpiar 352 unlk %a6 353 bral fpsp_done 354 355 |end