CHANGES (4725B)
1~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP 3M68000 Hi-Performance Microprocessor Division 4M68060 Software Package 5Production Release P1.00 -- October 10, 1994 6 7M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. 8 9THE SOFTWARE is provided on an "AS IS" basis and without warranty. 10To the maximum extent permitted by applicable law, 11MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, 12INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE 13and any warranty against infringement with regard to the SOFTWARE 14(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials. 15 16To the maximum extent permitted by applicable law, 17IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER 18(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, 19BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) 20ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE. 21Motorola assumes no responsibility for the maintenance and support of the SOFTWARE. 22 23You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE 24so long as this entire notice is retained without alteration in any modified and/or 25redistributed versions, and that such modified versions are clearly identified as such. 26No licenses are granted by implication, estoppel or otherwise under any patents 27or trademarks of Motorola, Inc. 28~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 29 30CHANGES SINCE LAST RELEASE: 31--------------------------- 32 331) "movep" emulation where data was being read from memory 34was reading the intermediate bytes. Emulation now only 35reads the required bytes. 36 372) "flogn", "flog2", and "flog10" of "1" was setting the 38Inexact FPSR bit. Emulation now does not set Inexact for 39this case. 40 413) For an opclass three FP instruction where the effective addressing 42mode was pre-decrement or post-increment and the address register 43was A0 or A1, the address register was not being updated as a result 44of the operation. This has been corrected. 45 464) Beta B.2 version had the following erratum: 47 48 Scenario: 49 --------- 50 If {i,d}mem_{read,write}_{byte,word,long}() returns 51 a failing value to the 68060SP, the package ignores 52 this return value and continues with program execution 53 as if it never received a failing value. 54 55 Effect: 56 ------- 57 For example, if a user executed "fsin.x ADDR,fp0" where 58 ADDR should cause a "segmentation violation", the memory read 59 requested by the package should return a failing value 60 to the package. Since the package currently ignores this 61 return value, the user program will continue to the 62 next instruction, and the result created in fp0 will be 63 undefined. 64 65 Fix: 66 ---- 67 This has been fixed in the current release. 68 69 Notes: 70 ------ 71 Upon receiving a non-zero (failing) return value from 72 a {i,d}mem_{read,write}_{byte,word,long}() "call-out", 73 the package creates a 16-byte access error stack frame 74 from the current exception stack frame and exits 75 through the "call-out" _real_access(). This is the process 76 as described in the MC68060 User's Manual. 77 78 For instruction read access errors, the info stacked is: 79 SR = SR at time of exception 80 PC = PC of instruction being emulated 81 VOFF = $4008 (stack frame format type) 82 ADDRESS = PC of instruction being emulated 83 FSLW = FAULT STATUS LONGWORD 84 85 The valid FSLW bits are: 86 bit 27 = 1 (misaligned bit) 87 bit 24 = 1 (read) 88 bit 23 = 0 (write) 89 bit 22:21 = 10 (SIZE = word) 90 bit 20:19 = 00 (TT) 91 bit 18:16 = x10 (TM; x = 1 for supervisor mode) 92 bit 15 = 1 (IO) 93 bit 0 = 1 (Software Emulation Error) 94 95 all other bits are EQUAL TO ZERO and can be set by the _real_access() 96 "call-out" stub by the user as appropriate. The MC68060 User's Manual 97 stated that ONLY "bit 0" would be set. The 060SP attempts to set a few 98 other bits. 99 100 For data read/write access errors, the info stacked is: 101 SR = SR at time of exception 102 PC = PC of instruction being emulated 103 VOFF = $4008 (stack frame format type) 104 ADDRESS = Address of source or destination operand 105 FSLW = FAULT STATUS LONGWORD 106 107 The valid FSLW bits are: 108 bit 27 = 0 (misaligned bit) 109 bit 24 = x (read; 1 if read, 0 if write) 110 bit 23 = x (write; 1 if write, 0 if read) 111 bit 22:21 = xx (SIZE; see MC68060 User's Manual) 112 bit 20:19 = 00 (TT) 113 bit 18:16 = x01 (TM; x = 1 for supervisor mode) 114 bit 15 = 0 (IO) 115 bit 0 = 1 (Software Emulation Error) 116 117 all other bits are EQUAL TO ZERO and can be set by the _real_access() 118 "call-out" stub by the user as appropriate. The MC68060 User's Manual 119 stated that ONLY "bit 0" would be set. The 060SP attempts to set a few 120 other bits.