bcm7346.dtsi (12474B)
1// SPDX-License-Identifier: GPL-2.0 2/ { 3 #address-cells = <1>; 4 #size-cells = <1>; 5 compatible = "brcm,bcm7346"; 6 7 cpus { 8 #address-cells = <1>; 9 #size-cells = <0>; 10 11 mips-hpt-frequency = <163125000>; 12 13 cpu@0 { 14 compatible = "brcm,bmips5000"; 15 device_type = "cpu"; 16 reg = <0>; 17 }; 18 19 cpu@1 { 20 compatible = "brcm,bmips5000"; 21 device_type = "cpu"; 22 reg = <1>; 23 }; 24 }; 25 26 aliases { 27 uart0 = &uart0; 28 }; 29 30 cpu_intc: interrupt-controller { 31 #address-cells = <0>; 32 compatible = "mti,cpu-interrupt-controller"; 33 34 interrupt-controller; 35 #interrupt-cells = <1>; 36 }; 37 38 clocks { 39 uart_clk: uart_clk { 40 compatible = "fixed-clock"; 41 #clock-cells = <0>; 42 clock-frequency = <81000000>; 43 }; 44 45 upg_clk: upg_clk { 46 compatible = "fixed-clock"; 47 #clock-cells = <0>; 48 clock-frequency = <27000000>; 49 }; 50 }; 51 52 rdb { 53 #address-cells = <1>; 54 #size-cells = <1>; 55 56 compatible = "simple-bus"; 57 ranges = <0 0x10000000 0x01000000>; 58 59 periph_intc: interrupt-controller@411400 { 60 compatible = "brcm,bcm7038-l1-intc"; 61 reg = <0x411400 0x30>, <0x411600 0x30>; 62 63 interrupt-controller; 64 #interrupt-cells = <1>; 65 66 interrupt-parent = <&cpu_intc>; 67 interrupts = <2>, <3>; 68 }; 69 70 sun_l2_intc: interrupt-controller@403000 { 71 compatible = "brcm,l2-intc"; 72 reg = <0x403000 0x30>; 73 interrupt-controller; 74 #interrupt-cells = <1>; 75 interrupt-parent = <&periph_intc>; 76 interrupts = <51>; 77 }; 78 79 gisb-arb@400000 { 80 compatible = "brcm,bcm7400-gisb-arb"; 81 reg = <0x400000 0xdc>; 82 native-endian; 83 interrupt-parent = <&sun_l2_intc>; 84 interrupts = <0>, <2>; 85 brcm,gisb-arb-master-mask = <0x673>; 86 brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0", 87 "rdc_0", "raaga_0", 88 "jtag_0", "svd_0"; 89 }; 90 91 upg_irq0_intc: interrupt-controller@406780 { 92 compatible = "brcm,bcm7120-l2-intc"; 93 reg = <0x406780 0x8>; 94 95 brcm,int-map-mask = <0x44>, <0xf000000>; 96 brcm,int-fwd-mask = <0x70000>; 97 98 interrupt-controller; 99 #interrupt-cells = <1>; 100 101 interrupt-parent = <&periph_intc>; 102 interrupts = <59>, <57>; 103 interrupt-names = "upg_main", "upg_bsc"; 104 }; 105 106 upg_aon_irq0_intc: interrupt-controller@408b80 { 107 compatible = "brcm,bcm7120-l2-intc"; 108 reg = <0x408b80 0x8>; 109 110 brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>; 111 brcm,int-fwd-mask = <0>; 112 brcm,irq-can-wake; 113 114 interrupt-controller; 115 #interrupt-cells = <1>; 116 117 interrupt-parent = <&periph_intc>; 118 interrupts = <60>, <58>, <62>; 119 interrupt-names = "upg_main_aon", "upg_bsc_aon", 120 "upg_spi"; 121 }; 122 123 sun_top_ctrl: syscon@404000 { 124 compatible = "brcm,bcm7346-sun-top-ctrl", "syscon"; 125 reg = <0x404000 0x51c>; 126 native-endian; 127 }; 128 129 reboot { 130 compatible = "brcm,brcmstb-reboot"; 131 syscon = <&sun_top_ctrl 0x304 0x308>; 132 }; 133 134 uart0: serial@406900 { 135 compatible = "ns16550a"; 136 reg = <0x406900 0x20>; 137 reg-io-width = <0x4>; 138 reg-shift = <0x2>; 139 native-endian; 140 interrupt-parent = <&periph_intc>; 141 interrupts = <64>; 142 clocks = <&uart_clk>; 143 status = "disabled"; 144 }; 145 146 uart1: serial@406940 { 147 compatible = "ns16550a"; 148 reg = <0x406940 0x20>; 149 reg-io-width = <0x4>; 150 reg-shift = <0x2>; 151 native-endian; 152 interrupt-parent = <&periph_intc>; 153 interrupts = <65>; 154 clocks = <&uart_clk>; 155 status = "disabled"; 156 }; 157 158 uart2: serial@406980 { 159 compatible = "ns16550a"; 160 reg = <0x406980 0x20>; 161 reg-io-width = <0x4>; 162 reg-shift = <0x2>; 163 native-endian; 164 interrupt-parent = <&periph_intc>; 165 interrupts = <66>; 166 clocks = <&uart_clk>; 167 status = "disabled"; 168 }; 169 170 bsca: i2c@406200 { 171 clock-frequency = <390000>; 172 compatible = "brcm,brcmstb-i2c"; 173 interrupt-parent = <&upg_irq0_intc>; 174 reg = <0x406200 0x58>; 175 interrupts = <24>; 176 interrupt-names = "upg_bsca"; 177 status = "disabled"; 178 }; 179 180 bscb: i2c@406280 { 181 clock-frequency = <390000>; 182 compatible = "brcm,brcmstb-i2c"; 183 interrupt-parent = <&upg_irq0_intc>; 184 reg = <0x406280 0x58>; 185 interrupts = <25>; 186 interrupt-names = "upg_bscb"; 187 status = "disabled"; 188 }; 189 190 bscc: i2c@406300 { 191 clock-frequency = <390000>; 192 compatible = "brcm,brcmstb-i2c"; 193 interrupt-parent = <&upg_irq0_intc>; 194 reg = <0x406300 0x58>; 195 interrupts = <26>; 196 interrupt-names = "upg_bscc"; 197 status = "disabled"; 198 }; 199 200 bscd: i2c@406380 { 201 clock-frequency = <390000>; 202 compatible = "brcm,brcmstb-i2c"; 203 interrupt-parent = <&upg_irq0_intc>; 204 reg = <0x406380 0x58>; 205 interrupts = <27>; 206 interrupt-names = "upg_bscd"; 207 status = "disabled"; 208 }; 209 210 bsce: i2c@408980 { 211 clock-frequency = <390000>; 212 compatible = "brcm,brcmstb-i2c"; 213 interrupt-parent = <&upg_aon_irq0_intc>; 214 reg = <0x408980 0x58>; 215 interrupts = <27>; 216 interrupt-names = "upg_bsce"; 217 status = "disabled"; 218 }; 219 220 pwma: pwm@406580 { 221 compatible = "brcm,bcm7038-pwm"; 222 reg = <0x406580 0x28>; 223 #pwm-cells = <2>; 224 clocks = <&upg_clk>; 225 status = "disabled"; 226 }; 227 228 pwmb: pwm@406800 { 229 compatible = "brcm,bcm7038-pwm"; 230 reg = <0x406800 0x28>; 231 #pwm-cells = <2>; 232 clocks = <&upg_clk>; 233 status = "disabled"; 234 }; 235 236 watchdog: watchdog@4067e8 { 237 clocks = <&upg_clk>; 238 compatible = "brcm,bcm7038-wdt"; 239 reg = <0x4067e8 0x14>; 240 status = "disabled"; 241 }; 242 243 aon_pm_l2_intc: interrupt-controller@408440 { 244 compatible = "brcm,l2-intc"; 245 reg = <0x408440 0x30>; 246 interrupt-controller; 247 #interrupt-cells = <1>; 248 interrupt-parent = <&periph_intc>; 249 interrupts = <53>; 250 brcm,irq-can-wake; 251 }; 252 253 aon_ctrl: syscon@408000 { 254 compatible = "brcm,brcmstb-aon-ctrl"; 255 reg = <0x408000 0x100>, <0x408200 0x200>; 256 reg-names = "aon-ctrl", "aon-sram"; 257 }; 258 259 timers: timer@4067c0 { 260 compatible = "brcm,brcmstb-timers"; 261 reg = <0x4067c0 0x40>; 262 }; 263 264 upg_gio: gpio@406700 { 265 compatible = "brcm,brcmstb-gpio"; 266 reg = <0x406700 0x60>; 267 #gpio-cells = <2>; 268 #interrupt-cells = <2>; 269 gpio-controller; 270 interrupt-controller; 271 interrupt-parent = <&upg_irq0_intc>; 272 interrupts = <6>; 273 brcm,gpio-bank-widths = <32 32 16>; 274 }; 275 276 upg_gio_aon: gpio@408c00 { 277 compatible = "brcm,brcmstb-gpio"; 278 reg = <0x408c00 0x60>; 279 #gpio-cells = <2>; 280 #interrupt-cells = <2>; 281 gpio-controller; 282 interrupt-controller; 283 interrupt-parent = <&upg_aon_irq0_intc>; 284 interrupts = <6>; 285 interrupts-extended = <&upg_aon_irq0_intc 6>, 286 <&aon_pm_l2_intc 5>; 287 wakeup-source; 288 brcm,gpio-bank-widths = <27 32 2>; 289 }; 290 291 enet0: ethernet@430000 { 292 phy-mode = "internal"; 293 phy-handle = <&phy1>; 294 mac-address = [ 00 10 18 36 23 1a ]; 295 compatible = "brcm,genet-v2"; 296 #address-cells = <0x1>; 297 #size-cells = <0x1>; 298 reg = <0x430000 0x4c8c>; 299 interrupts = <24>, <25>; 300 interrupt-parent = <&periph_intc>; 301 status = "disabled"; 302 303 mdio@e14 { 304 compatible = "brcm,genet-mdio-v2"; 305 #address-cells = <0x1>; 306 #size-cells = <0x0>; 307 reg = <0xe14 0x8>; 308 309 phy1: ethernet-phy@1 { 310 max-speed = <100>; 311 reg = <0x1>; 312 compatible = "brcm,40nm-ephy", 313 "ethernet-phy-ieee802.3-c22"; 314 }; 315 }; 316 }; 317 318 ehci0: usb@480300 { 319 compatible = "brcm,bcm7346-ehci", "generic-ehci"; 320 reg = <0x480300 0x100>; 321 native-endian; 322 interrupt-parent = <&periph_intc>; 323 interrupts = <68>; 324 status = "disabled"; 325 }; 326 327 ohci0: usb@480400 { 328 compatible = "brcm,bcm7346-ohci", "generic-ohci"; 329 reg = <0x480400 0x100>; 330 native-endian; 331 no-big-frame-no; 332 interrupt-parent = <&periph_intc>; 333 interrupts = <70>; 334 status = "disabled"; 335 }; 336 337 ehci1: usb@480500 { 338 compatible = "brcm,bcm7346-ehci", "generic-ehci"; 339 reg = <0x480500 0x100>; 340 native-endian; 341 interrupt-parent = <&periph_intc>; 342 interrupts = <69>; 343 status = "disabled"; 344 }; 345 346 ohci1: usb@480600 { 347 compatible = "brcm,bcm7346-ohci", "generic-ohci"; 348 reg = <0x480600 0x100>; 349 native-endian; 350 no-big-frame-no; 351 interrupt-parent = <&periph_intc>; 352 interrupts = <71>; 353 status = "disabled"; 354 }; 355 356 ehci2: usb@490300 { 357 compatible = "brcm,bcm7346-ehci", "generic-ehci"; 358 reg = <0x490300 0x100>; 359 native-endian; 360 interrupt-parent = <&periph_intc>; 361 interrupts = <73>; 362 status = "disabled"; 363 }; 364 365 ohci2: usb@490400 { 366 compatible = "brcm,bcm7346-ohci", "generic-ohci"; 367 reg = <0x490400 0x100>; 368 native-endian; 369 no-big-frame-no; 370 interrupt-parent = <&periph_intc>; 371 interrupts = <75>; 372 status = "disabled"; 373 }; 374 375 ehci3: usb@490500 { 376 compatible = "brcm,bcm7346-ehci", "generic-ehci"; 377 reg = <0x490500 0x100>; 378 native-endian; 379 interrupt-parent = <&periph_intc>; 380 interrupts = <74>; 381 status = "disabled"; 382 }; 383 384 ohci3: usb@490600 { 385 compatible = "brcm,bcm7346-ohci", "generic-ohci"; 386 reg = <0x490600 0x100>; 387 native-endian; 388 no-big-frame-no; 389 interrupt-parent = <&periph_intc>; 390 interrupts = <76>; 391 status = "disabled"; 392 }; 393 394 hif_l2_intc: interrupt-controller@411000 { 395 compatible = "brcm,l2-intc"; 396 reg = <0x411000 0x30>; 397 interrupt-controller; 398 #interrupt-cells = <1>; 399 interrupt-parent = <&periph_intc>; 400 interrupts = <30>; 401 }; 402 403 nand: nand@412800 { 404 compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand"; 405 #address-cells = <1>; 406 #size-cells = <0>; 407 reg-names = "nand"; 408 reg = <0x412800 0x400>; 409 interrupt-parent = <&hif_l2_intc>; 410 interrupts = <24>; 411 status = "disabled"; 412 }; 413 414 sata: sata@181000 { 415 compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci"; 416 reg-names = "ahci", "top-ctrl"; 417 reg = <0x181000 0xa9c>, <0x180020 0x1c>; 418 interrupt-parent = <&periph_intc>; 419 interrupts = <40>; 420 #address-cells = <1>; 421 #size-cells = <0>; 422 status = "disabled"; 423 424 sata0: sata-port@0 { 425 reg = <0>; 426 phys = <&sata_phy0>; 427 }; 428 429 sata1: sata-port@1 { 430 reg = <1>; 431 phys = <&sata_phy1>; 432 }; 433 }; 434 435 sata_phy: sata-phy@180100 { 436 compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3"; 437 reg = <0x180100 0x0eff>; 438 reg-names = "phy"; 439 #address-cells = <1>; 440 #size-cells = <0>; 441 status = "disabled"; 442 443 sata_phy0: sata-phy@0 { 444 reg = <0>; 445 #phy-cells = <0>; 446 }; 447 448 sata_phy1: sata-phy@1 { 449 reg = <1>; 450 #phy-cells = <0>; 451 }; 452 }; 453 454 sdhci0: sdhci@413500 { 455 compatible = "brcm,bcm7425-sdhci"; 456 reg = <0x413500 0x100>; 457 interrupt-parent = <&periph_intc>; 458 interrupts = <85>; 459 status = "disabled"; 460 }; 461 462 spi_l2_intc: interrupt-controller@411d00 { 463 compatible = "brcm,l2-intc"; 464 reg = <0x411d00 0x30>; 465 interrupt-controller; 466 #interrupt-cells = <1>; 467 interrupt-parent = <&periph_intc>; 468 interrupts = <31>; 469 }; 470 471 qspi: spi@413000 { 472 #address-cells = <0x1>; 473 #size-cells = <0x0>; 474 compatible = "brcm,spi-bcm-qspi", 475 "brcm,spi-brcmstb-qspi"; 476 clocks = <&upg_clk>; 477 reg = <0x410920 0x4 0x413200 0x188 0x413000 0x50>; 478 reg-names = "cs_reg", "hif_mspi", "bspi"; 479 interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>; 480 interrupt-parent = <&spi_l2_intc>; 481 interrupt-names = "spi_lr_fullness_reached", 482 "spi_lr_session_aborted", 483 "spi_lr_impatient", 484 "spi_lr_session_done", 485 "spi_lr_overread", 486 "mspi_done", 487 "mspi_halted"; 488 status = "disabled"; 489 }; 490 491 mspi: spi@408a00 { 492 #address-cells = <1>; 493 #size-cells = <0>; 494 compatible = "brcm,spi-bcm-qspi", 495 "brcm,spi-brcmstb-mspi"; 496 clocks = <&upg_clk>; 497 reg = <0x408a00 0x180>; 498 reg-names = "mspi"; 499 interrupts = <0x14>; 500 interrupt-parent = <&upg_aon_irq0_intc>; 501 interrupt-names = "mspi_done"; 502 status = "disabled"; 503 }; 504 505 waketimer: waketimer@408e80 { 506 compatible = "brcm,brcmstb-waketimer"; 507 reg = <0x408e80 0x14>; 508 interrupts = <0x3>; 509 interrupt-parent = <&aon_pm_l2_intc>; 510 interrupt-names = "timer"; 511 clocks = <&upg_clk>; 512 status = "disabled"; 513 }; 514 }; 515 516 memory_controllers { 517 compatible = "simple-bus"; 518 ranges = <0x0 0x103b0000 0xa000>; 519 #address-cells = <1>; 520 #size-cells = <1>; 521 522 memory-controller@0 { 523 compatible = "brcm,brcmstb-memc", "simple-bus"; 524 ranges = <0x0 0x0 0xa000>; 525 #address-cells = <1>; 526 #size-cells = <1>; 527 528 memc-arb@1000 { 529 compatible = "brcm,brcmstb-memc-arb"; 530 reg = <0x1000 0x248>; 531 }; 532 533 memc-ddr@2000 { 534 compatible = "brcm,brcmstb-memc-ddr"; 535 reg = <0x2000 0x300>; 536 }; 537 538 ddr-phy@6000 { 539 compatible = "brcm,brcmstb-ddr-phy"; 540 reg = <0x6000 0xc8>; 541 }; 542 543 shimphy@8000 { 544 compatible = "brcm,brcmstb-ddr-shimphy"; 545 reg = <0x8000 0x13c>; 546 }; 547 }; 548 }; 549};