bcm7360.dtsi (10617B)
1// SPDX-License-Identifier: GPL-2.0 2/ { 3 #address-cells = <1>; 4 #size-cells = <1>; 5 compatible = "brcm,bcm7360"; 6 7 cpus { 8 #address-cells = <1>; 9 #size-cells = <0>; 10 11 mips-hpt-frequency = <375000000>; 12 13 cpu@0 { 14 compatible = "brcm,bmips3300"; 15 device_type = "cpu"; 16 reg = <0>; 17 }; 18 }; 19 20 aliases { 21 uart0 = &uart0; 22 }; 23 24 cpu_intc: interrupt-controller { 25 #address-cells = <0>; 26 compatible = "mti,cpu-interrupt-controller"; 27 28 interrupt-controller; 29 #interrupt-cells = <1>; 30 }; 31 32 clocks { 33 uart_clk: uart_clk { 34 compatible = "fixed-clock"; 35 #clock-cells = <0>; 36 clock-frequency = <81000000>; 37 }; 38 39 upg_clk: upg_clk { 40 compatible = "fixed-clock"; 41 #clock-cells = <0>; 42 clock-frequency = <27000000>; 43 }; 44 }; 45 46 rdb { 47 #address-cells = <1>; 48 #size-cells = <1>; 49 50 compatible = "simple-bus"; 51 ranges = <0 0x10000000 0x01000000>; 52 53 periph_intc: interrupt-controller@411400 { 54 compatible = "brcm,bcm7038-l1-intc"; 55 reg = <0x411400 0x30>; 56 57 interrupt-controller; 58 #interrupt-cells = <1>; 59 60 interrupt-parent = <&cpu_intc>; 61 interrupts = <2>; 62 }; 63 64 sun_l2_intc: interrupt-controller@403000 { 65 compatible = "brcm,l2-intc"; 66 reg = <0x403000 0x30>; 67 interrupt-controller; 68 #interrupt-cells = <1>; 69 interrupt-parent = <&periph_intc>; 70 interrupts = <48>; 71 }; 72 73 gisb-arb@400000 { 74 compatible = "brcm,bcm7400-gisb-arb"; 75 reg = <0x400000 0xdc>; 76 native-endian; 77 interrupt-parent = <&sun_l2_intc>; 78 interrupts = <0>, <2>; 79 brcm,gisb-arb-master-mask = <0x2f3>; 80 brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0", 81 "rdc_0", "raaga_0", 82 "avd_0", "jtag_0"; 83 }; 84 85 upg_irq0_intc: interrupt-controller@406600 { 86 compatible = "brcm,bcm7120-l2-intc"; 87 reg = <0x406600 0x8>; 88 89 brcm,int-map-mask = <0x44>, <0x7000000>; 90 brcm,int-fwd-mask = <0x70000>; 91 92 interrupt-controller; 93 #interrupt-cells = <1>; 94 95 interrupt-parent = <&periph_intc>; 96 interrupts = <56>, <54>; 97 interrupt-names = "upg_main", "upg_bsc"; 98 }; 99 100 upg_aon_irq0_intc: interrupt-controller@408b80 { 101 compatible = "brcm,bcm7120-l2-intc"; 102 reg = <0x408b80 0x8>; 103 104 brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>; 105 brcm,int-fwd-mask = <0>; 106 brcm,irq-can-wake; 107 108 interrupt-controller; 109 #interrupt-cells = <1>; 110 111 interrupt-parent = <&periph_intc>; 112 interrupts = <57>, <55>, <59>; 113 interrupt-names = "upg_main_aon", "upg_bsc_aon", 114 "upg_spi"; 115 }; 116 117 sun_top_ctrl: syscon@404000 { 118 compatible = "brcm,bcm7360-sun-top-ctrl", "syscon"; 119 reg = <0x404000 0x51c>; 120 native-endian; 121 }; 122 123 reboot { 124 compatible = "brcm,brcmstb-reboot"; 125 syscon = <&sun_top_ctrl 0x304 0x308>; 126 }; 127 128 uart0: serial@406800 { 129 compatible = "ns16550a"; 130 reg = <0x406800 0x20>; 131 reg-io-width = <0x4>; 132 reg-shift = <0x2>; 133 native-endian; 134 interrupt-parent = <&periph_intc>; 135 interrupts = <61>; 136 clocks = <&uart_clk>; 137 status = "disabled"; 138 }; 139 140 uart1: serial@406840 { 141 compatible = "ns16550a"; 142 reg = <0x406840 0x20>; 143 reg-io-width = <0x4>; 144 reg-shift = <0x2>; 145 native-endian; 146 interrupt-parent = <&periph_intc>; 147 interrupts = <62>; 148 clocks = <&uart_clk>; 149 status = "disabled"; 150 }; 151 152 uart2: serial@406880 { 153 compatible = "ns16550a"; 154 reg = <0x406880 0x20>; 155 reg-io-width = <0x4>; 156 reg-shift = <0x2>; 157 native-endian; 158 interrupt-parent = <&periph_intc>; 159 interrupts = <63>; 160 clocks = <&uart_clk>; 161 status = "disabled"; 162 }; 163 164 bsca: i2c@406200 { 165 clock-frequency = <390000>; 166 compatible = "brcm,brcmstb-i2c"; 167 interrupt-parent = <&upg_irq0_intc>; 168 reg = <0x406200 0x58>; 169 interrupts = <24>; 170 interrupt-names = "upg_bsca"; 171 status = "disabled"; 172 }; 173 174 bscb: i2c@406280 { 175 clock-frequency = <390000>; 176 compatible = "brcm,brcmstb-i2c"; 177 interrupt-parent = <&upg_irq0_intc>; 178 reg = <0x406280 0x58>; 179 interrupts = <25>; 180 interrupt-names = "upg_bscb"; 181 status = "disabled"; 182 }; 183 184 bscc: i2c@406300 { 185 clock-frequency = <390000>; 186 compatible = "brcm,brcmstb-i2c"; 187 interrupt-parent = <&upg_irq0_intc>; 188 reg = <0x406300 0x58>; 189 interrupts = <26>; 190 interrupt-names = "upg_bscc"; 191 status = "disabled"; 192 }; 193 194 bscd: i2c@408980 { 195 clock-frequency = <390000>; 196 compatible = "brcm,brcmstb-i2c"; 197 interrupt-parent = <&upg_aon_irq0_intc>; 198 reg = <0x408980 0x58>; 199 interrupts = <27>; 200 interrupt-names = "upg_bscd"; 201 status = "disabled"; 202 }; 203 204 pwma: pwm@406400 { 205 compatible = "brcm,bcm7038-pwm"; 206 reg = <0x406400 0x28>; 207 #pwm-cells = <2>; 208 clocks = <&upg_clk>; 209 status = "disabled"; 210 }; 211 212 watchdog: watchdog@4066a8 { 213 clocks = <&upg_clk>; 214 compatible = "brcm,bcm7038-wdt"; 215 reg = <0x4066a8 0x14>; 216 status = "disabled"; 217 }; 218 219 aon_pm_l2_intc: interrupt-controller@408440 { 220 compatible = "brcm,l2-intc"; 221 reg = <0x408440 0x30>; 222 interrupt-controller; 223 #interrupt-cells = <1>; 224 interrupt-parent = <&periph_intc>; 225 interrupts = <50>; 226 brcm,irq-can-wake; 227 }; 228 229 aon_ctrl: syscon@408000 { 230 compatible = "brcm,brcmstb-aon-ctrl"; 231 reg = <0x408000 0x100>, <0x408200 0x200>; 232 reg-names = "aon-ctrl", "aon-sram"; 233 }; 234 235 timers: timer@406680 { 236 compatible = "brcm,brcmstb-timers"; 237 reg = <0x406680 0x40>; 238 }; 239 240 upg_gio: gpio@406500 { 241 compatible = "brcm,brcmstb-gpio"; 242 reg = <0x406500 0xa0>; 243 #gpio-cells = <2>; 244 #interrupt-cells = <2>; 245 gpio-controller; 246 interrupt-controller; 247 interrupt-parent = <&upg_irq0_intc>; 248 interrupts = <6>; 249 brcm,gpio-bank-widths = <32 32 32 29 4>; 250 }; 251 252 upg_gio_aon: gpio@408c00 { 253 compatible = "brcm,brcmstb-gpio"; 254 reg = <0x408c00 0x60>; 255 #gpio-cells = <2>; 256 #interrupt-cells = <2>; 257 gpio-controller; 258 interrupt-controller; 259 interrupt-parent = <&upg_aon_irq0_intc>; 260 interrupts = <6>; 261 interrupts-extended = <&upg_aon_irq0_intc 6>, 262 <&aon_pm_l2_intc 5>; 263 wakeup-source; 264 brcm,gpio-bank-widths = <21 32 2>; 265 }; 266 267 enet0: ethernet@430000 { 268 phy-mode = "internal"; 269 phy-handle = <&phy1>; 270 mac-address = [ 00 10 18 36 23 1a ]; 271 compatible = "brcm,genet-v2"; 272 #address-cells = <0x1>; 273 #size-cells = <0x1>; 274 reg = <0x430000 0x4c8c>; 275 interrupts = <24>, <25>; 276 interrupt-parent = <&periph_intc>; 277 status = "disabled"; 278 279 mdio@e14 { 280 compatible = "brcm,genet-mdio-v2"; 281 #address-cells = <0x1>; 282 #size-cells = <0x0>; 283 reg = <0xe14 0x8>; 284 285 phy1: ethernet-phy@1 { 286 max-speed = <100>; 287 reg = <0x1>; 288 compatible = "brcm,40nm-ephy", 289 "ethernet-phy-ieee802.3-c22"; 290 }; 291 }; 292 }; 293 294 ehci0: usb@480300 { 295 compatible = "brcm,bcm7360-ehci", "generic-ehci"; 296 reg = <0x480300 0x100>; 297 native-endian; 298 interrupt-parent = <&periph_intc>; 299 interrupts = <65>; 300 status = "disabled"; 301 }; 302 303 ohci0: usb@480400 { 304 compatible = "brcm,bcm7360-ohci", "generic-ohci"; 305 reg = <0x480400 0x100>; 306 native-endian; 307 no-big-frame-no; 308 interrupt-parent = <&periph_intc>; 309 interrupts = <66>; 310 status = "disabled"; 311 }; 312 313 hif_l2_intc: interrupt-controller@411000 { 314 compatible = "brcm,l2-intc"; 315 reg = <0x411000 0x30>; 316 interrupt-controller; 317 #interrupt-cells = <1>; 318 interrupt-parent = <&periph_intc>; 319 interrupts = <30>; 320 }; 321 322 nand: nand@412800 { 323 compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand"; 324 #address-cells = <1>; 325 #size-cells = <0>; 326 reg-names = "nand"; 327 reg = <0x412800 0x400>; 328 interrupt-parent = <&hif_l2_intc>; 329 interrupts = <24>; 330 status = "disabled"; 331 }; 332 333 sata: sata@181000 { 334 compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci"; 335 reg-names = "ahci", "top-ctrl"; 336 reg = <0x181000 0xa9c>, <0x180020 0x1c>; 337 interrupt-parent = <&periph_intc>; 338 interrupts = <86>; 339 #address-cells = <1>; 340 #size-cells = <0>; 341 status = "disabled"; 342 343 sata0: sata-port@0 { 344 reg = <0>; 345 phys = <&sata_phy0>; 346 }; 347 348 sata1: sata-port@1 { 349 reg = <1>; 350 phys = <&sata_phy1>; 351 }; 352 }; 353 354 sata_phy: sata-phy@180100 { 355 compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3"; 356 reg = <0x180100 0x0eff>; 357 reg-names = "phy"; 358 #address-cells = <1>; 359 #size-cells = <0>; 360 status = "disabled"; 361 362 sata_phy0: sata-phy@0 { 363 reg = <0>; 364 #phy-cells = <0>; 365 }; 366 367 sata_phy1: sata-phy@1 { 368 reg = <1>; 369 #phy-cells = <0>; 370 }; 371 }; 372 373 sdhci0: sdhci@410000 { 374 compatible = "brcm,bcm7425-sdhci"; 375 reg = <0x410000 0x100>; 376 interrupt-parent = <&periph_intc>; 377 interrupts = <82>; 378 status = "disabled"; 379 }; 380 381 spi_l2_intc: interrupt-controller@411d00 { 382 compatible = "brcm,l2-intc"; 383 reg = <0x411d00 0x30>; 384 interrupt-controller; 385 #interrupt-cells = <1>; 386 interrupt-parent = <&periph_intc>; 387 interrupts = <31>; 388 }; 389 390 qspi: spi@413000 { 391 #address-cells = <0x1>; 392 #size-cells = <0x0>; 393 compatible = "brcm,spi-bcm-qspi", 394 "brcm,spi-brcmstb-qspi"; 395 clocks = <&upg_clk>; 396 reg = <0x410920 0x4 0x413200 0x188 0x413000 0x50>; 397 reg-names = "cs_reg", "hif_mspi", "bspi"; 398 interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>; 399 interrupt-parent = <&spi_l2_intc>; 400 interrupt-names = "spi_lr_fullness_reached", 401 "spi_lr_session_aborted", 402 "spi_lr_impatient", 403 "spi_lr_session_done", 404 "spi_lr_overread", 405 "mspi_done", 406 "mspi_halted"; 407 status = "disabled"; 408 }; 409 410 mspi: spi@408a00 { 411 #address-cells = <1>; 412 #size-cells = <0>; 413 compatible = "brcm,spi-bcm-qspi", 414 "brcm,spi-brcmstb-mspi"; 415 clocks = <&upg_clk>; 416 reg = <0x408a00 0x180>; 417 reg-names = "mspi"; 418 interrupts = <0x14>; 419 interrupt-parent = <&upg_aon_irq0_intc>; 420 interrupt-names = "mspi_done"; 421 status = "disabled"; 422 }; 423 424 waketimer: waketimer@408e80 { 425 compatible = "brcm,brcmstb-waketimer"; 426 reg = <0x408e80 0x14>; 427 interrupts = <0x3>; 428 interrupt-parent = <&aon_pm_l2_intc>; 429 interrupt-names = "timer"; 430 clocks = <&upg_clk>; 431 status = "disabled"; 432 }; 433 }; 434 435 memory_controllers { 436 compatible = "simple-bus"; 437 ranges = <0x0 0x103b0000 0xa000>; 438 #address-cells = <1>; 439 #size-cells = <1>; 440 441 memory-controller@0 { 442 compatible = "brcm,brcmstb-memc", "simple-bus"; 443 ranges = <0x0 0x0 0xa000>; 444 #address-cells = <1>; 445 #size-cells = <1>; 446 447 memc-arb@1000 { 448 compatible = "brcm,brcmstb-memc-arb"; 449 reg = <0x1000 0x248>; 450 }; 451 452 memc-ddr@2000 { 453 compatible = "brcm,brcmstb-memc-ddr"; 454 reg = <0x2000 0x300>; 455 }; 456 457 ddr-phy@6000 { 458 compatible = "brcm,brcmstb-ddr-phy"; 459 reg = <0x6000 0xc8>; 460 }; 461 462 shimphy@8000 { 463 compatible = "brcm,brcmstb-ddr-shimphy"; 464 reg = <0x8000 0x13c>; 465 }; 466 }; 467 }; 468};