bcm7420.dtsi (7866B)
1// SPDX-License-Identifier: GPL-2.0 2/ { 3 #address-cells = <1>; 4 #size-cells = <1>; 5 compatible = "brcm,bcm7420"; 6 7 cpus { 8 #address-cells = <1>; 9 #size-cells = <0>; 10 11 mips-hpt-frequency = <93750000>; 12 13 cpu@0 { 14 compatible = "brcm,bmips5000"; 15 device_type = "cpu"; 16 reg = <0>; 17 }; 18 19 cpu@1 { 20 compatible = "brcm,bmips5000"; 21 device_type = "cpu"; 22 reg = <1>; 23 }; 24 }; 25 26 aliases { 27 uart0 = &uart0; 28 }; 29 30 cpu_intc: interrupt-controller { 31 #address-cells = <0>; 32 compatible = "mti,cpu-interrupt-controller"; 33 34 interrupt-controller; 35 #interrupt-cells = <1>; 36 }; 37 38 clocks { 39 uart_clk: uart_clk { 40 compatible = "fixed-clock"; 41 #clock-cells = <0>; 42 clock-frequency = <81000000>; 43 }; 44 45 upg_clk: upg_clk { 46 compatible = "fixed-clock"; 47 #clock-cells = <0>; 48 clock-frequency = <27000000>; 49 }; 50 }; 51 52 rdb { 53 #address-cells = <1>; 54 #size-cells = <1>; 55 56 compatible = "simple-bus"; 57 ranges = <0 0x10000000 0x01000000>; 58 59 periph_intc: interrupt-controller@441400 { 60 compatible = "brcm,bcm7038-l1-intc"; 61 reg = <0x441400 0x30>, <0x441600 0x30>; 62 63 interrupt-controller; 64 #interrupt-cells = <1>; 65 66 interrupt-parent = <&cpu_intc>; 67 interrupts = <2>, <3>; 68 }; 69 70 sun_l2_intc: interrupt-controller@401800 { 71 compatible = "brcm,l2-intc"; 72 reg = <0x401800 0x30>; 73 interrupt-controller; 74 #interrupt-cells = <1>; 75 interrupt-parent = <&periph_intc>; 76 interrupts = <23>; 77 }; 78 79 gisb-arb@400000 { 80 compatible = "brcm,bcm7400-gisb-arb"; 81 reg = <0x400000 0xdc>; 82 native-endian; 83 interrupt-parent = <&sun_l2_intc>; 84 interrupts = <0>, <2>; 85 brcm,gisb-arb-master-mask = <0x3ff>; 86 brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pci_0", 87 "pcie_0", "bsp_0", "rdc_0", 88 "rptd_0", "avd_0", "avd_1", 89 "jtag_0"; 90 }; 91 92 upg_irq0_intc: interrupt-controller@406780 { 93 compatible = "brcm,bcm7120-l2-intc"; 94 reg = <0x406780 0x8>; 95 96 brcm,int-map-mask = <0x44>, <0x1f000000>, <0x100000>; 97 brcm,int-fwd-mask = <0x70000>; 98 99 interrupt-controller; 100 #interrupt-cells = <1>; 101 102 interrupt-parent = <&periph_intc>; 103 interrupts = <18>, <19>, <20>; 104 interrupt-names = "upg_main", "upg_bsc", "upg_spi"; 105 }; 106 107 sun_top_ctrl: syscon@404000 { 108 compatible = "brcm,bcm7420-sun-top-ctrl", "syscon"; 109 reg = <0x404000 0x60c>; 110 native-endian; 111 }; 112 113 reboot { 114 compatible = "brcm,bcm7038-reboot"; 115 syscon = <&sun_top_ctrl 0x8 0x14>; 116 }; 117 118 uart0: serial@406b00 { 119 compatible = "ns16550a"; 120 reg = <0x406b00 0x20>; 121 reg-io-width = <0x4>; 122 reg-shift = <0x2>; 123 interrupt-parent = <&periph_intc>; 124 interrupts = <21>; 125 clocks = <&uart_clk>; 126 status = "disabled"; 127 }; 128 129 uart1: serial@406b40 { 130 compatible = "ns16550a"; 131 reg = <0x406b40 0x20>; 132 reg-io-width = <0x4>; 133 reg-shift = <0x2>; 134 interrupt-parent = <&periph_intc>; 135 interrupts = <64>; 136 clocks = <&uart_clk>; 137 status = "disabled"; 138 }; 139 140 uart2: serial@406b80 { 141 compatible = "ns16550a"; 142 reg = <0x406b80 0x20>; 143 reg-io-width = <0x4>; 144 reg-shift = <0x2>; 145 interrupt-parent = <&periph_intc>; 146 interrupts = <65>; 147 clocks = <&uart_clk>; 148 status = "disabled"; 149 }; 150 151 bsca: i2c@406200 { 152 clock-frequency = <390000>; 153 compatible = "brcm,brcmstb-i2c"; 154 interrupt-parent = <&upg_irq0_intc>; 155 reg = <0x406200 0x58>; 156 interrupts = <24>; 157 interrupt-names = "upg_bsca"; 158 status = "disabled"; 159 }; 160 161 bscb: i2c@406280 { 162 clock-frequency = <390000>; 163 compatible = "brcm,brcmstb-i2c"; 164 interrupt-parent = <&upg_irq0_intc>; 165 reg = <0x406280 0x58>; 166 interrupts = <25>; 167 interrupt-names = "upg_bscb"; 168 status = "disabled"; 169 }; 170 171 bscc: i2c@406300 { 172 clock-frequency = <390000>; 173 compatible = "brcm,brcmstb-i2c"; 174 interrupt-parent = <&upg_irq0_intc>; 175 reg = <0x406300 0x58>; 176 interrupts = <26>; 177 interrupt-names = "upg_bscc"; 178 status = "disabled"; 179 }; 180 181 bscd: i2c@406380 { 182 clock-frequency = <390000>; 183 compatible = "brcm,brcmstb-i2c"; 184 interrupt-parent = <&upg_irq0_intc>; 185 reg = <0x406380 0x58>; 186 interrupts = <27>; 187 interrupt-names = "upg_bscd"; 188 status = "disabled"; 189 }; 190 191 bsce: i2c@406800 { 192 clock-frequency = <390000>; 193 compatible = "brcm,brcmstb-i2c"; 194 interrupt-parent = <&upg_irq0_intc>; 195 reg = <0x406800 0x58>; 196 interrupts = <28>; 197 interrupt-names = "upg_bsce"; 198 status = "disabled"; 199 }; 200 201 pwma: pwm@406580 { 202 compatible = "brcm,bcm7038-pwm"; 203 reg = <0x406580 0x28>; 204 #pwm-cells = <2>; 205 clocks = <&upg_clk>; 206 status = "disabled"; 207 }; 208 209 pwmb: pwm@406880 { 210 compatible = "brcm,bcm7038-pwm"; 211 reg = <0x406880 0x28>; 212 #pwm-cells = <2>; 213 clocks = <&upg_clk>; 214 status = "disabled"; 215 }; 216 217 watchdog: watchdog@4067e8 { 218 clocks = <&upg_clk>; 219 compatible = "brcm,bcm7038-wdt"; 220 reg = <0x4067e8 0x14>; 221 status = "disabled"; 222 }; 223 224 upg_gio: gpio@406700 { 225 compatible = "brcm,brcmstb-gpio"; 226 reg = <0x406700 0x80>; 227 #gpio-cells = <2>; 228 #interrupt-cells = <2>; 229 gpio-controller; 230 interrupt-controller; 231 interrupt-parent = <&upg_irq0_intc>; 232 interrupts = <6>; 233 brcm,gpio-bank-widths = <32 32 32 27>; 234 }; 235 236 enet0: ethernet@468000 { 237 phy-mode = "internal"; 238 phy-handle = <&phy1>; 239 mac-address = [ 00 10 18 36 23 1a ]; 240 compatible = "brcm,genet-v1"; 241 #address-cells = <0x1>; 242 #size-cells = <0x1>; 243 reg = <0x468000 0x3c8c>; 244 interrupts = <69>, <79>; 245 interrupt-parent = <&periph_intc>; 246 status = "disabled"; 247 248 mdio@e14 { 249 compatible = "brcm,genet-mdio-v1"; 250 #address-cells = <0x1>; 251 #size-cells = <0x0>; 252 reg = <0xe14 0x8>; 253 254 phy1: ethernet-phy@1 { 255 max-speed = <100>; 256 reg = <0x1>; 257 compatible = "brcm,65nm-ephy", 258 "ethernet-phy-ieee802.3-c22"; 259 }; 260 }; 261 }; 262 263 ehci0: usb@488300 { 264 compatible = "brcm,bcm7420-ehci", "generic-ehci"; 265 reg = <0x488300 0x100>; 266 interrupt-parent = <&periph_intc>; 267 interrupts = <60>; 268 status = "disabled"; 269 }; 270 271 ohci0: usb@488400 { 272 compatible = "brcm,bcm7420-ohci", "generic-ohci"; 273 reg = <0x488400 0x100>; 274 native-endian; 275 no-big-frame-no; 276 interrupt-parent = <&periph_intc>; 277 interrupts = <61>; 278 status = "disabled"; 279 }; 280 281 ehci1: usb@488500 { 282 compatible = "brcm,bcm7420-ehci", "generic-ehci"; 283 reg = <0x488500 0x100>; 284 interrupt-parent = <&periph_intc>; 285 interrupts = <55>; 286 status = "disabled"; 287 }; 288 289 ohci1: usb@488600 { 290 compatible = "brcm,bcm7420-ohci", "generic-ohci"; 291 reg = <0x488600 0x100>; 292 native-endian; 293 no-big-frame-no; 294 interrupt-parent = <&periph_intc>; 295 interrupts = <62>; 296 status = "disabled"; 297 }; 298 299 spi_l2_intc: interrupt-controller@411d00 { 300 compatible = "brcm,l2-intc"; 301 reg = <0x411d00 0x30>; 302 interrupt-controller; 303 #interrupt-cells = <1>; 304 interrupt-parent = <&periph_intc>; 305 interrupts = <78>; 306 }; 307 308 qspi: spi@443000 { 309 #address-cells = <0x1>; 310 #size-cells = <0x0>; 311 compatible = "brcm,spi-bcm-qspi", 312 "brcm,spi-brcmstb-qspi"; 313 clocks = <&upg_clk>; 314 reg = <0x440920 0x4 0x443200 0x188 0x443000 0x50>; 315 reg-names = "cs_reg", "hif_mspi", "bspi"; 316 interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>; 317 interrupt-parent = <&spi_l2_intc>; 318 interrupt-names = "spi_lr_fullness_reached", 319 "spi_lr_session_aborted", 320 "spi_lr_impatient", 321 "spi_lr_session_done", 322 "spi_lr_overread", 323 "mspi_done", 324 "mspi_halted"; 325 status = "disabled"; 326 }; 327 328 mspi: spi@406400 { 329 #address-cells = <1>; 330 #size-cells = <0>; 331 compatible = "brcm,spi-bcm-qspi", 332 "brcm,spi-brcmstb-mspi"; 333 clocks = <&upg_clk>; 334 reg = <0x406400 0x180>; 335 reg-names = "mspi"; 336 interrupts = <0x14>; 337 interrupt-parent = <&upg_irq0_intc>; 338 interrupt-names = "mspi_done"; 339 status = "disabled"; 340 }; 341 }; 342};