x1830.dtsi (8612B)
1// SPDX-License-Identifier: GPL-2.0 2#include <dt-bindings/clock/ingenic,tcu.h> 3#include <dt-bindings/clock/ingenic,x1830-cgu.h> 4#include <dt-bindings/dma/x1830-dma.h> 5 6/ { 7 #address-cells = <1>; 8 #size-cells = <1>; 9 compatible = "ingenic,x1830"; 10 11 cpus { 12 #address-cells = <1>; 13 #size-cells = <0>; 14 15 cpu0: cpu@0 { 16 device_type = "cpu"; 17 compatible = "ingenic,xburst-fpu2.0-mxu2.0"; 18 reg = <0>; 19 20 clocks = <&cgu X1830_CLK_CPU>; 21 clock-names = "cpu"; 22 }; 23 }; 24 25 cpuintc: interrupt-controller { 26 #address-cells = <0>; 27 #interrupt-cells = <1>; 28 interrupt-controller; 29 compatible = "mti,cpu-interrupt-controller"; 30 }; 31 32 intc: interrupt-controller@10001000 { 33 compatible = "ingenic,x1830-intc", "ingenic,jz4780-intc"; 34 reg = <0x10001000 0x50>; 35 36 interrupt-controller; 37 #interrupt-cells = <1>; 38 39 interrupt-parent = <&cpuintc>; 40 interrupts = <2>; 41 }; 42 43 exclk: ext { 44 compatible = "fixed-clock"; 45 #clock-cells = <0>; 46 }; 47 48 rtclk: rtc { 49 compatible = "fixed-clock"; 50 #clock-cells = <0>; 51 clock-frequency = <32768>; 52 }; 53 54 cgu: x1830-cgu@10000000 { 55 compatible = "ingenic,x1830-cgu", "simple-mfd"; 56 reg = <0x10000000 0x100>; 57 #address-cells = <1>; 58 #size-cells = <1>; 59 ranges = <0x0 0x10000000 0x100>; 60 61 #clock-cells = <1>; 62 63 clocks = <&exclk>, <&rtclk>; 64 clock-names = "ext", "rtc"; 65 66 otg_phy: usb-phy@3c { 67 compatible = "ingenic,x1830-phy"; 68 reg = <0x3c 0x10>; 69 70 clocks = <&cgu X1830_CLK_OTGPHY>; 71 72 #phy-cells = <0>; 73 74 status = "disabled"; 75 }; 76 77 mac_phy_ctrl: mac-phy-ctrl@e8 { 78 compatible = "syscon"; 79 reg = <0xe8 0x4>; 80 }; 81 }; 82 83 ost: timer@12000000 { 84 compatible = "ingenic,x1830-ost", "ingenic,x1000-ost"; 85 reg = <0x12000000 0x3c>; 86 87 #clock-cells = <1>; 88 89 clocks = <&cgu X1830_CLK_OST>; 90 clock-names = "ost"; 91 92 interrupt-parent = <&cpuintc>; 93 interrupts = <4>; 94 }; 95 96 tcu: timer@10002000 { 97 compatible = "ingenic,x1830-tcu", "ingenic,x1000-tcu", "simple-mfd"; 98 reg = <0x10002000 0x1000>; 99 #address-cells = <1>; 100 #size-cells = <1>; 101 ranges = <0x0 0x10002000 0x1000>; 102 103 #clock-cells = <1>; 104 105 clocks = <&cgu X1830_CLK_RTCLK>, 106 <&cgu X1830_CLK_EXCLK>, 107 <&cgu X1830_CLK_PCLK>, 108 <&cgu X1830_CLK_TCU>; 109 clock-names = "rtc", "ext", "pclk", "tcu"; 110 111 interrupt-controller; 112 #interrupt-cells = <1>; 113 114 interrupt-parent = <&intc>; 115 interrupts = <27 26 25>; 116 117 wdt: watchdog@0 { 118 compatible = "ingenic,x1830-watchdog", "ingenic,jz4780-watchdog"; 119 reg = <0x0 0x10>; 120 121 clocks = <&tcu TCU_CLK_WDT>; 122 clock-names = "wdt"; 123 }; 124 125 pwm: pwm@40 { 126 compatible = "ingenic,x1830-pwm", "ingenic,jz4740-pwm"; 127 reg = <0x40 0x80>; 128 129 #pwm-cells = <3>; 130 131 clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, 132 <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, 133 <&tcu TCU_CLK_TIMER4>, <&tcu TCU_CLK_TIMER5>, 134 <&tcu TCU_CLK_TIMER6>, <&tcu TCU_CLK_TIMER7>; 135 clock-names = "timer0", "timer1", "timer2", "timer3", 136 "timer4", "timer5", "timer6", "timer7"; 137 }; 138 }; 139 140 rtc: rtc@10003000 { 141 compatible = "ingenic,x1830-rtc", "ingenic,jz4780-rtc"; 142 reg = <0x10003000 0x4c>; 143 144 interrupt-parent = <&intc>; 145 interrupts = <32>; 146 147 clocks = <&cgu X1830_CLK_RTCLK>; 148 clock-names = "rtc"; 149 }; 150 151 pinctrl: pin-controller@10010000 { 152 compatible = "ingenic,x1830-pinctrl"; 153 reg = <0x10010000 0x800>; 154 #address-cells = <1>; 155 #size-cells = <0>; 156 157 gpa: gpio@0 { 158 compatible = "ingenic,x1830-gpio"; 159 reg = <0>; 160 161 gpio-controller; 162 gpio-ranges = <&pinctrl 0 0 32>; 163 #gpio-cells = <2>; 164 165 interrupt-controller; 166 #interrupt-cells = <2>; 167 168 interrupt-parent = <&intc>; 169 interrupts = <17>; 170 }; 171 172 gpb: gpio@1 { 173 compatible = "ingenic,x1830-gpio"; 174 reg = <1>; 175 176 gpio-controller; 177 gpio-ranges = <&pinctrl 0 32 32>; 178 #gpio-cells = <2>; 179 180 interrupt-controller; 181 #interrupt-cells = <2>; 182 183 interrupt-parent = <&intc>; 184 interrupts = <16>; 185 }; 186 187 gpc: gpio@2 { 188 compatible = "ingenic,x1830-gpio"; 189 reg = <2>; 190 191 gpio-controller; 192 gpio-ranges = <&pinctrl 0 64 32>; 193 #gpio-cells = <2>; 194 195 interrupt-controller; 196 #interrupt-cells = <2>; 197 198 interrupt-parent = <&intc>; 199 interrupts = <15>; 200 }; 201 202 gpd: gpio@3 { 203 compatible = "ingenic,x1830-gpio"; 204 reg = <3>; 205 206 gpio-controller; 207 gpio-ranges = <&pinctrl 0 96 32>; 208 #gpio-cells = <2>; 209 210 interrupt-controller; 211 #interrupt-cells = <2>; 212 213 interrupt-parent = <&intc>; 214 interrupts = <14>; 215 }; 216 }; 217 218 uart0: serial@10030000 { 219 compatible = "ingenic,x1830-uart", "ingenic,x1000-uart"; 220 reg = <0x10030000 0x100>; 221 222 interrupt-parent = <&intc>; 223 interrupts = <51>; 224 225 clocks = <&exclk>, <&cgu X1830_CLK_UART0>; 226 clock-names = "baud", "module"; 227 228 status = "disabled"; 229 }; 230 231 uart1: serial@10031000 { 232 compatible = "ingenic,x1830-uart", "ingenic,x1000-uart"; 233 reg = <0x10031000 0x100>; 234 235 interrupt-parent = <&intc>; 236 interrupts = <50>; 237 238 clocks = <&exclk>, <&cgu X1830_CLK_UART1>; 239 clock-names = "baud", "module"; 240 241 status = "disabled"; 242 }; 243 244 ssi0: spi@10043000 { 245 compatible = "ingenic,x1830-spi", "ingenic,x1000-spi"; 246 reg = <0x10043000 0x20>; 247 #address-cells = <1>; 248 #size-cells = <0>; 249 250 interrupt-parent = <&intc>; 251 interrupts = <9>; 252 253 clocks = <&cgu X1830_CLK_SSI0>; 254 clock-names = "spi"; 255 256 dmas = <&pdma X1830_DMA_SSI0_RX 0xffffffff>, 257 <&pdma X1830_DMA_SSI0_TX 0xffffffff>; 258 dma-names = "rx", "tx"; 259 260 status = "disabled"; 261 }; 262 263 ssi1: spi@10044000 { 264 compatible = "ingenic,x1830-spi", "ingenic,x1000-spi"; 265 reg = <0x10044000 0x20>; 266 #address-cells = <1>; 267 #size-cells = <0>; 268 269 interrupt-parent = <&intc>; 270 interrupts = <8>; 271 272 clocks = <&cgu X1830_CLK_SSI1>; 273 clock-names = "spi"; 274 275 dmas = <&pdma X1830_DMA_SSI1_RX 0xffffffff>, 276 <&pdma X1830_DMA_SSI1_TX 0xffffffff>; 277 dma-names = "rx", "tx"; 278 279 status = "disabled"; 280 }; 281 282 i2c0: i2c-controller@10050000 { 283 compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c"; 284 reg = <0x10050000 0x1000>; 285 #address-cells = <1>; 286 #size-cells = <0>; 287 288 interrupt-parent = <&intc>; 289 interrupts = <60>; 290 291 clocks = <&cgu X1830_CLK_SMB0>; 292 293 status = "disabled"; 294 }; 295 296 i2c1: i2c-controller@10051000 { 297 compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c"; 298 reg = <0x10051000 0x1000>; 299 #address-cells = <1>; 300 #size-cells = <0>; 301 302 interrupt-parent = <&intc>; 303 interrupts = <59>; 304 305 clocks = <&cgu X1830_CLK_SMB1>; 306 307 status = "disabled"; 308 }; 309 310 i2c2: i2c-controller@10052000 { 311 compatible = "ingenic,x1830-i2c", "ingenic,x1000-i2c"; 312 reg = <0x10052000 0x1000>; 313 #address-cells = <1>; 314 #size-cells = <0>; 315 316 interrupt-parent = <&intc>; 317 interrupts = <58>; 318 319 clocks = <&cgu X1830_CLK_SMB2>; 320 321 status = "disabled"; 322 }; 323 324 dtrng: trng@10072000 { 325 compatible = "ingenic,x1830-dtrng"; 326 reg = <0x10072000 0xc>; 327 328 clocks = <&cgu X1830_CLK_DTRNG>; 329 330 status = "disabled"; 331 }; 332 333 pdma: dma-controller@13420000 { 334 compatible = "ingenic,x1830-dma"; 335 reg = <0x13420000 0x400>, <0x13421000 0x40>; 336 337 #dma-cells = <2>; 338 339 interrupt-parent = <&intc>; 340 interrupts = <10>; 341 342 clocks = <&cgu X1830_CLK_PDMA>; 343 }; 344 345 msc0: mmc@13450000 { 346 compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc"; 347 reg = <0x13450000 0x1000>; 348 349 interrupt-parent = <&intc>; 350 interrupts = <37>; 351 352 clocks = <&cgu X1830_CLK_MSC0>; 353 clock-names = "mmc"; 354 355 cap-sd-highspeed; 356 cap-mmc-highspeed; 357 cap-sdio-irq; 358 359 dmas = <&pdma X1830_DMA_MSC0_RX 0xffffffff>, 360 <&pdma X1830_DMA_MSC0_TX 0xffffffff>; 361 dma-names = "rx", "tx"; 362 363 status = "disabled"; 364 }; 365 366 msc1: mmc@13460000 { 367 compatible = "ingenic,x1830-mmc", "ingenic,x1000-mmc"; 368 reg = <0x13460000 0x1000>; 369 370 interrupt-parent = <&intc>; 371 interrupts = <36>; 372 373 clocks = <&cgu X1830_CLK_MSC1>; 374 clock-names = "mmc"; 375 376 cap-sd-highspeed; 377 cap-mmc-highspeed; 378 cap-sdio-irq; 379 380 dmas = <&pdma X1830_DMA_MSC1_RX 0xffffffff>, 381 <&pdma X1830_DMA_MSC1_TX 0xffffffff>; 382 dma-names = "rx", "tx"; 383 384 status = "disabled"; 385 }; 386 387 mac: ethernet@134b0000 { 388 compatible = "ingenic,x1830-mac", "snps,dwmac"; 389 reg = <0x134b0000 0x2000>; 390 391 interrupt-parent = <&intc>; 392 interrupts = <55>; 393 interrupt-names = "macirq"; 394 395 clocks = <&cgu X1830_CLK_MAC>; 396 clock-names = "stmmaceth"; 397 398 mode-reg = <&mac_phy_ctrl>; 399 400 status = "disabled"; 401 402 mdio: mdio { 403 compatible = "snps,dwmac-mdio"; 404 #address-cells = <1>; 405 #size-cells = <0>; 406 407 status = "disabled"; 408 }; 409 }; 410 411 otg: usb@13500000 { 412 compatible = "ingenic,x1830-otg"; 413 reg = <0x13500000 0x40000>; 414 415 interrupt-parent = <&intc>; 416 interrupts = <21>; 417 418 clocks = <&cgu X1830_CLK_OTG>; 419 clock-names = "otg"; 420 421 phys = <&otg_phy>; 422 phy-names = "usb2-phy"; 423 424 g-rx-fifo-size = <768>; 425 g-np-tx-fifo-size = <256>; 426 g-tx-fifo-size = <256 256 256 256 256 256 256 512>; 427 428 status = "disabled"; 429 }; 430};