cdmm.h (3761B)
1/* 2 * This file is subject to the terms and conditions of the GNU General Public 3 * License. See the file "COPYING" in the main directory of this archive 4 * for more details. 5 * 6 * Copyright (C) 2014 Imagination Technologies Ltd. 7 */ 8#ifndef __ASM_CDMM_H 9#define __ASM_CDMM_H 10 11#include <linux/device.h> 12#include <linux/mod_devicetable.h> 13 14/** 15 * struct mips_cdmm_device - Represents a single device on a CDMM bus. 16 * @dev: Driver model device object. 17 * @cpu: CPU which can access this device. 18 * @res: MMIO resource. 19 * @type: Device type identifier. 20 * @rev: Device revision number. 21 */ 22struct mips_cdmm_device { 23 struct device dev; 24 unsigned int cpu; 25 struct resource res; 26 unsigned int type; 27 unsigned int rev; 28}; 29 30/** 31 * struct mips_cdmm_driver - Represents a driver for a CDMM device. 32 * @drv: Driver model driver object. 33 * @probe Callback for probing newly discovered devices. 34 * @remove: Callback to remove the device. 35 * @shutdown: Callback on system shutdown. 36 * @cpu_down: Callback when the parent CPU is going down. 37 * Any CPU pinned threads/timers should be disabled. 38 * @cpu_up: Callback when the parent CPU is coming back up again. 39 * CPU pinned threads/timers can be restarted. 40 * @id_table: Table for CDMM IDs to match against. 41 */ 42struct mips_cdmm_driver { 43 struct device_driver drv; 44 int (*probe)(struct mips_cdmm_device *); 45 int (*remove)(struct mips_cdmm_device *); 46 void (*shutdown)(struct mips_cdmm_device *); 47 int (*cpu_down)(struct mips_cdmm_device *); 48 int (*cpu_up)(struct mips_cdmm_device *); 49 const struct mips_cdmm_device_id *id_table; 50}; 51 52/** 53 * mips_cdmm_phys_base() - Choose a physical base address for CDMM region. 54 * 55 * Picking a suitable physical address at which to map the CDMM region is 56 * platform specific, so this function can be defined by platform code to 57 * pick a suitable value if none is configured by the bootloader. 58 * 59 * This address must be 32kB aligned, and the region occupies a maximum of 32kB 60 * of physical address space which must not be used for anything else. 61 * 62 * Returns: Physical base address for CDMM region, or 0 on failure. 63 */ 64phys_addr_t mips_cdmm_phys_base(void); 65 66extern struct bus_type mips_cdmm_bustype; 67void __iomem *mips_cdmm_early_probe(unsigned int dev_type); 68 69#define to_mips_cdmm_device(d) container_of(d, struct mips_cdmm_device, dev) 70 71#define mips_cdmm_get_drvdata(d) dev_get_drvdata(&d->dev) 72#define mips_cdmm_set_drvdata(d, p) dev_set_drvdata(&d->dev, p) 73 74int mips_cdmm_driver_register(struct mips_cdmm_driver *); 75void mips_cdmm_driver_unregister(struct mips_cdmm_driver *); 76 77/* 78 * module_mips_cdmm_driver() - Helper macro for drivers that don't do 79 * anything special in module init/exit. This eliminates a lot of 80 * boilerplate. Each module may only use this macro once, and 81 * calling it replaces module_init() and module_exit() 82 */ 83#define module_mips_cdmm_driver(__mips_cdmm_driver) \ 84 module_driver(__mips_cdmm_driver, mips_cdmm_driver_register, \ 85 mips_cdmm_driver_unregister) 86 87/* 88 * builtin_mips_cdmm_driver() - Helper macro for drivers that don't do anything 89 * special in init and have no exit. This eliminates some boilerplate. Each 90 * driver may only use this macro once, and calling it replaces device_initcall 91 * (or in some cases, the legacy __initcall). This is meant to be a direct 92 * parallel of module_mips_cdmm_driver() above but without the __exit stuff that 93 * is not used for builtin cases. 94 */ 95#define builtin_mips_cdmm_driver(__mips_cdmm_driver) \ 96 builtin_driver(__mips_cdmm_driver, mips_cdmm_driver_register) 97 98/* drivers/tty/mips_ejtag_fdc.c */ 99 100#ifdef CONFIG_MIPS_EJTAG_FDC_EARLYCON 101int setup_early_fdc_console(void); 102#else 103static inline int setup_early_fdc_console(void) 104{ 105 return -ENODEV; 106} 107#endif 108 109#endif /* __ASM_CDMM_H */