bmips_vec.S (7181B)
1/* 2 * This file is subject to the terms and conditions of the GNU General Public 3 * License. See the file "COPYING" in the main directory of this archive 4 * for more details. 5 * 6 * Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com) 7 * 8 * Reset/NMI/re-entry vectors for BMIPS processors 9 */ 10 11 12#include <asm/asm.h> 13#include <asm/asmmacro.h> 14#include <asm/cacheops.h> 15#include <asm/cpu.h> 16#include <asm/regdef.h> 17#include <asm/mipsregs.h> 18#include <asm/stackframe.h> 19#include <asm/addrspace.h> 20#include <asm/hazards.h> 21#include <asm/bmips.h> 22 23 .macro BARRIER 24 .set mips32 25 _ssnop 26 _ssnop 27 _ssnop 28 .set mips0 29 .endm 30 31/*********************************************************************** 32 * Alternate CPU1 startup vector for BMIPS4350 33 * 34 * On some systems the bootloader has already started CPU1 and configured 35 * it to resume execution at 0x8000_0200 (!BEV IV vector) when it is 36 * triggered by the SW1 interrupt. If that is the case we try to move 37 * it to a more convenient place: BMIPS_WARM_RESTART_VEC @ 0x8000_0380. 38 ***********************************************************************/ 39 40LEAF(bmips_smp_movevec) 41 la k0, 1f 42 li k1, CKSEG1 43 or k0, k1 44 jr k0 45 461: 47 /* clear IV, pending IPIs */ 48 mtc0 zero, CP0_CAUSE 49 50 /* re-enable IRQs to wait for SW1 */ 51 li k0, ST0_IE | ST0_BEV | STATUSF_IP1 52 mtc0 k0, CP0_STATUS 53 54 /* set up CPU1 CBR; move BASE to 0xa000_0000 */ 55 li k0, 0xff400000 56 mtc0 k0, $22, 6 57 /* set up relocation vector address based on thread ID */ 58 mfc0 k1, $22, 3 59 srl k1, 16 60 andi k1, 0x8000 61 or k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_0 62 or k0, k1 63 li k1, 0xa0080000 64 sw k1, 0(k0) 65 66 /* wait here for SW1 interrupt from bmips_boot_secondary() */ 67 wait 68 69 la k0, bmips_reset_nmi_vec 70 li k1, CKSEG1 71 or k0, k1 72 jr k0 73END(bmips_smp_movevec) 74 75/*********************************************************************** 76 * Reset/NMI vector 77 * For BMIPS processors that can relocate their exception vectors, this 78 * entire function gets copied to 0x8000_0000. 79 ***********************************************************************/ 80 81NESTED(bmips_reset_nmi_vec, PT_SIZE, sp) 82 .set push 83 .set noat 84 .align 4 85 86#ifdef CONFIG_SMP 87 /* if the NMI bit is clear, assume this is a CPU1 reset instead */ 88 li k1, (1 << 19) 89 mfc0 k0, CP0_STATUS 90 and k0, k1 91 beqz k0, soft_reset 92 93#if defined(CONFIG_CPU_BMIPS5000) 94 mfc0 k0, CP0_PRID 95 li k1, PRID_IMP_BMIPS5000 96 /* mask with PRID_IMP_BMIPS5000 to cover both variants */ 97 andi k0, PRID_IMP_BMIPS5000 98 bne k0, k1, 1f 99 100 /* if we're not on core 0, this must be the SMP boot signal */ 101 li k1, (3 << 25) 102 mfc0 k0, $22 103 and k0, k1 104 bnez k0, bmips_smp_entry 1051: 106#endif /* CONFIG_CPU_BMIPS5000 */ 107#endif /* CONFIG_SMP */ 108 109 /* nope, it's just a regular NMI */ 110 SAVE_ALL 111 move a0, sp 112 113 /* clear EXL, ERL, BEV so that TLB refills still work */ 114 mfc0 k0, CP0_STATUS 115 li k1, ST0_ERL | ST0_EXL | ST0_BEV | ST0_IE 116 or k0, k1 117 xor k0, k1 118 mtc0 k0, CP0_STATUS 119 BARRIER 120 121 /* jump to the NMI handler function */ 122 la k0, nmi_handler 123 jr k0 124 125 RESTORE_ALL 126 .set arch=r4000 127 eret 128 129#ifdef CONFIG_SMP 130soft_reset: 131 132#if defined(CONFIG_CPU_BMIPS5000) 133 mfc0 k0, CP0_PRID 134 andi k0, 0xff00 135 li k1, PRID_IMP_BMIPS5200 136 bne k0, k1, bmips_smp_entry 137 138 /* if running on TP 1, jump to bmips_smp_entry */ 139 mfc0 k0, $22 140 li k1, (1 << 24) 141 and k1, k0 142 bnez k1, bmips_smp_entry 143 nop 144 145 /* 146 * running on TP0, can not be core 0 (the boot core). 147 * Check for soft reset. Indicates a warm boot 148 */ 149 mfc0 k0, $12 150 li k1, (1 << 20) 151 and k0, k1 152 beqz k0, bmips_smp_entry 153 154 /* 155 * Warm boot. 156 * Cache init is only done on TP0 157 */ 158 la k0, bmips_5xxx_init 159 jalr k0 160 nop 161 162 b bmips_smp_entry 163 nop 164#endif 165 166/*********************************************************************** 167 * CPU1 reset vector (used for the initial boot only) 168 * This is still part of bmips_reset_nmi_vec(). 169 ***********************************************************************/ 170 171bmips_smp_entry: 172 173 /* set up CP0 STATUS; enable FPU */ 174 li k0, 0x30000000 175 mtc0 k0, CP0_STATUS 176 BARRIER 177 178 /* set local CP0 CONFIG to make kseg0 cacheable, write-back */ 179 mfc0 k0, CP0_CONFIG 180 ori k0, 0x07 181 xori k0, 0x04 182 mtc0 k0, CP0_CONFIG 183 184 mfc0 k0, CP0_PRID 185 andi k0, 0xff00 186#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) 187 li k1, PRID_IMP_BMIPS43XX 188 bne k0, k1, 2f 189 190 /* initialize CPU1's local I-cache */ 191 li k0, 0x80000000 192 li k1, 0x80010000 193 mtc0 zero, $28 194 mtc0 zero, $28, 1 195 BARRIER 196 1971: cache Index_Store_Tag_I, 0(k0) 198 addiu k0, 16 199 bne k0, k1, 1b 200 201 b 3f 2022: 203#endif /* CONFIG_CPU_BMIPS4350 || CONFIG_CPU_BMIPS4380 */ 204#if defined(CONFIG_CPU_BMIPS5000) 205 /* mask with PRID_IMP_BMIPS5000 to cover both variants */ 206 li k1, PRID_IMP_BMIPS5000 207 andi k0, PRID_IMP_BMIPS5000 208 bne k0, k1, 3f 209 210 /* set exception vector base */ 211 la k0, ebase 212 lw k0, 0(k0) 213 mtc0 k0, $15, 1 214 BARRIER 215#endif /* CONFIG_CPU_BMIPS5000 */ 2163: 217 /* jump back to kseg0 in case we need to remap the kseg1 area */ 218 la k0, 1f 219 jr k0 2201: 221 la k0, bmips_enable_xks01 222 jalr k0 223 224 /* use temporary stack to set up upper memory TLB */ 225 li sp, BMIPS_WARM_RESTART_VEC 226 la k0, plat_wired_tlb_setup 227 jalr k0 228 229 /* switch to permanent stack and continue booting */ 230 231 .global bmips_secondary_reentry 232bmips_secondary_reentry: 233 la k0, bmips_smp_boot_sp 234 lw sp, 0(k0) 235 la k0, bmips_smp_boot_gp 236 lw gp, 0(k0) 237 la k0, start_secondary 238 jr k0 239 240#endif /* CONFIG_SMP */ 241 242 .align 4 243 .global bmips_reset_nmi_vec_end 244bmips_reset_nmi_vec_end: 245 246END(bmips_reset_nmi_vec) 247 248 .set pop 249 250/*********************************************************************** 251 * CPU1 warm restart vector (used for second and subsequent boots). 252 * Also used for S2 standby recovery (PM). 253 * This entire function gets copied to (BMIPS_WARM_RESTART_VEC) 254 ***********************************************************************/ 255 256LEAF(bmips_smp_int_vec) 257 258 .align 4 259 mfc0 k0, CP0_STATUS 260 ori k0, 0x01 261 xori k0, 0x01 262 mtc0 k0, CP0_STATUS 263 eret 264 265 .align 4 266 .global bmips_smp_int_vec_end 267bmips_smp_int_vec_end: 268 269END(bmips_smp_int_vec) 270 271/*********************************************************************** 272 * XKS01 support 273 * Certain CPUs support extending kseg0 to 1024MB. 274 ***********************************************************************/ 275 276LEAF(bmips_enable_xks01) 277 278#if defined(CONFIG_XKS01) 279 mfc0 t0, CP0_PRID 280 andi t2, t0, 0xff00 281#if defined(CONFIG_CPU_BMIPS4380) 282 li t1, PRID_IMP_BMIPS43XX 283 bne t2, t1, 1f 284 285 andi t0, 0xff 286 addiu t1, t0, -PRID_REV_BMIPS4380_HI 287 bgtz t1, 2f 288 addiu t0, -PRID_REV_BMIPS4380_LO 289 bltz t0, 2f 290 291 mfc0 t0, $22, 3 292 li t1, 0x1ff0 293 li t2, (1 << 12) | (1 << 9) 294 or t0, t1 295 xor t0, t1 296 or t0, t2 297 mtc0 t0, $22, 3 298 BARRIER 299 b 2f 3001: 301#endif /* CONFIG_CPU_BMIPS4380 */ 302#if defined(CONFIG_CPU_BMIPS5000) 303 li t1, PRID_IMP_BMIPS5000 304 /* mask with PRID_IMP_BMIPS5000 to cover both variants */ 305 andi t2, PRID_IMP_BMIPS5000 306 bne t2, t1, 2f 307 308 mfc0 t0, $22, 5 309 li t1, 0x01ff 310 li t2, (1 << 8) | (1 << 5) 311 or t0, t1 312 xor t0, t1 313 or t0, t2 314 mtc0 t0, $22, 5 315 BARRIER 316#endif /* CONFIG_CPU_BMIPS5000 */ 3172: 318#endif /* defined(CONFIG_XKS01) */ 319 320 jr ra 321 322END(bmips_enable_xks01)