entry.S (33713B)
1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * OpenRISC entry.S 4 * 5 * Linux architectural port borrowing liberally from similar works of 6 * others. All original copyrights apply as per the original source 7 * declaration. 8 * 9 * Modifications for the OpenRISC architecture: 10 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com> 11 * Copyright (C) 2005 Gyorgy Jeney <nog@bsemi.com> 12 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se> 13 */ 14 15#include <linux/linkage.h> 16#include <linux/pgtable.h> 17 18#include <asm/processor.h> 19#include <asm/unistd.h> 20#include <asm/thread_info.h> 21#include <asm/errno.h> 22#include <asm/spr_defs.h> 23#include <asm/page.h> 24#include <asm/mmu.h> 25#include <asm/asm-offsets.h> 26 27#define DISABLE_INTERRUPTS(t1,t2) \ 28 l.mfspr t2,r0,SPR_SR ;\ 29 l.movhi t1,hi(~(SPR_SR_IEE|SPR_SR_TEE)) ;\ 30 l.ori t1,t1,lo(~(SPR_SR_IEE|SPR_SR_TEE)) ;\ 31 l.and t2,t2,t1 ;\ 32 l.mtspr r0,t2,SPR_SR 33 34#define ENABLE_INTERRUPTS(t1) \ 35 l.mfspr t1,r0,SPR_SR ;\ 36 l.ori t1,t1,lo(SPR_SR_IEE|SPR_SR_TEE) ;\ 37 l.mtspr r0,t1,SPR_SR 38 39/* =========================================================[ macros ]=== */ 40 41#ifdef CONFIG_TRACE_IRQFLAGS 42/* 43 * Trace irq on/off creating a stack frame. 44 */ 45#define TRACE_IRQS_OP(trace_op) \ 46 l.sw -8(r1),r2 /* store frame pointer */ ;\ 47 l.sw -4(r1),r9 /* store return address */ ;\ 48 l.addi r2,r1,0 /* move sp to fp */ ;\ 49 l.jal trace_op ;\ 50 l.addi r1,r1,-8 ;\ 51 l.ori r1,r2,0 /* restore sp */ ;\ 52 l.lwz r9,-4(r1) /* restore return address */ ;\ 53 l.lwz r2,-8(r1) /* restore fp */ ;\ 54/* 55 * Trace irq on/off and save registers we need that would otherwise be 56 * clobbered. 57 */ 58#define TRACE_IRQS_SAVE(t1,trace_op) \ 59 l.sw -12(r1),t1 /* save extra reg */ ;\ 60 l.sw -8(r1),r2 /* store frame pointer */ ;\ 61 l.sw -4(r1),r9 /* store return address */ ;\ 62 l.addi r2,r1,0 /* move sp to fp */ ;\ 63 l.jal trace_op ;\ 64 l.addi r1,r1,-12 ;\ 65 l.ori r1,r2,0 /* restore sp */ ;\ 66 l.lwz r9,-4(r1) /* restore return address */ ;\ 67 l.lwz r2,-8(r1) /* restore fp */ ;\ 68 l.lwz t1,-12(r1) /* restore extra reg */ 69 70#define TRACE_IRQS_OFF TRACE_IRQS_OP(trace_hardirqs_off) 71#define TRACE_IRQS_ON TRACE_IRQS_OP(trace_hardirqs_on) 72#define TRACE_IRQS_ON_SYSCALL \ 73 TRACE_IRQS_SAVE(r10,trace_hardirqs_on) ;\ 74 l.lwz r3,PT_GPR3(r1) ;\ 75 l.lwz r4,PT_GPR4(r1) ;\ 76 l.lwz r5,PT_GPR5(r1) ;\ 77 l.lwz r6,PT_GPR6(r1) ;\ 78 l.lwz r7,PT_GPR7(r1) ;\ 79 l.lwz r8,PT_GPR8(r1) ;\ 80 l.lwz r11,PT_GPR11(r1) 81#define TRACE_IRQS_OFF_ENTRY \ 82 l.lwz r5,PT_SR(r1) ;\ 83 l.andi r3,r5,(SPR_SR_IEE|SPR_SR_TEE) ;\ 84 l.sfeq r5,r0 /* skip trace if irqs were already off */;\ 85 l.bf 1f ;\ 86 l.nop ;\ 87 TRACE_IRQS_SAVE(r4,trace_hardirqs_off) ;\ 881: 89#else 90#define TRACE_IRQS_OFF 91#define TRACE_IRQS_ON 92#define TRACE_IRQS_OFF_ENTRY 93#define TRACE_IRQS_ON_SYSCALL 94#endif 95 96/* 97 * We need to disable interrupts at beginning of RESTORE_ALL 98 * since interrupt might come in after we've loaded EPC return address 99 * and overwrite EPC with address somewhere in RESTORE_ALL 100 * which is of course wrong! 101 */ 102 103#define RESTORE_ALL \ 104 DISABLE_INTERRUPTS(r3,r4) ;\ 105 l.lwz r3,PT_PC(r1) ;\ 106 l.mtspr r0,r3,SPR_EPCR_BASE ;\ 107 l.lwz r3,PT_SR(r1) ;\ 108 l.mtspr r0,r3,SPR_ESR_BASE ;\ 109 l.lwz r2,PT_GPR2(r1) ;\ 110 l.lwz r3,PT_GPR3(r1) ;\ 111 l.lwz r4,PT_GPR4(r1) ;\ 112 l.lwz r5,PT_GPR5(r1) ;\ 113 l.lwz r6,PT_GPR6(r1) ;\ 114 l.lwz r7,PT_GPR7(r1) ;\ 115 l.lwz r8,PT_GPR8(r1) ;\ 116 l.lwz r9,PT_GPR9(r1) ;\ 117 l.lwz r10,PT_GPR10(r1) ;\ 118 l.lwz r11,PT_GPR11(r1) ;\ 119 l.lwz r12,PT_GPR12(r1) ;\ 120 l.lwz r13,PT_GPR13(r1) ;\ 121 l.lwz r14,PT_GPR14(r1) ;\ 122 l.lwz r15,PT_GPR15(r1) ;\ 123 l.lwz r16,PT_GPR16(r1) ;\ 124 l.lwz r17,PT_GPR17(r1) ;\ 125 l.lwz r18,PT_GPR18(r1) ;\ 126 l.lwz r19,PT_GPR19(r1) ;\ 127 l.lwz r20,PT_GPR20(r1) ;\ 128 l.lwz r21,PT_GPR21(r1) ;\ 129 l.lwz r22,PT_GPR22(r1) ;\ 130 l.lwz r23,PT_GPR23(r1) ;\ 131 l.lwz r24,PT_GPR24(r1) ;\ 132 l.lwz r25,PT_GPR25(r1) ;\ 133 l.lwz r26,PT_GPR26(r1) ;\ 134 l.lwz r27,PT_GPR27(r1) ;\ 135 l.lwz r28,PT_GPR28(r1) ;\ 136 l.lwz r29,PT_GPR29(r1) ;\ 137 l.lwz r30,PT_GPR30(r1) ;\ 138 l.lwz r31,PT_GPR31(r1) ;\ 139 l.lwz r1,PT_SP(r1) ;\ 140 l.rfe 141 142 143#define EXCEPTION_ENTRY(handler) \ 144 .global handler ;\ 145handler: ;\ 146 /* r1, EPCR, ESR a already saved */ ;\ 147 l.sw PT_GPR2(r1),r2 ;\ 148 l.sw PT_GPR3(r1),r3 ;\ 149 /* r4 already save */ ;\ 150 l.sw PT_GPR5(r1),r5 ;\ 151 l.sw PT_GPR6(r1),r6 ;\ 152 l.sw PT_GPR7(r1),r7 ;\ 153 l.sw PT_GPR8(r1),r8 ;\ 154 l.sw PT_GPR9(r1),r9 ;\ 155 /* r10 already saved */ ;\ 156 l.sw PT_GPR11(r1),r11 ;\ 157 /* r12 already saved */ ;\ 158 l.sw PT_GPR13(r1),r13 ;\ 159 l.sw PT_GPR14(r1),r14 ;\ 160 l.sw PT_GPR15(r1),r15 ;\ 161 l.sw PT_GPR16(r1),r16 ;\ 162 l.sw PT_GPR17(r1),r17 ;\ 163 l.sw PT_GPR18(r1),r18 ;\ 164 l.sw PT_GPR19(r1),r19 ;\ 165 l.sw PT_GPR20(r1),r20 ;\ 166 l.sw PT_GPR21(r1),r21 ;\ 167 l.sw PT_GPR22(r1),r22 ;\ 168 l.sw PT_GPR23(r1),r23 ;\ 169 l.sw PT_GPR24(r1),r24 ;\ 170 l.sw PT_GPR25(r1),r25 ;\ 171 l.sw PT_GPR26(r1),r26 ;\ 172 l.sw PT_GPR27(r1),r27 ;\ 173 l.sw PT_GPR28(r1),r28 ;\ 174 l.sw PT_GPR29(r1),r29 ;\ 175 /* r30 already save */ ;\ 176/* l.sw PT_GPR30(r1),r30*/ ;\ 177 l.sw PT_GPR31(r1),r31 ;\ 178 TRACE_IRQS_OFF_ENTRY ;\ 179 /* Store -1 in orig_gpr11 for non-syscall exceptions */ ;\ 180 l.addi r30,r0,-1 ;\ 181 l.sw PT_ORIG_GPR11(r1),r30 182 183#define UNHANDLED_EXCEPTION(handler,vector) \ 184 .global handler ;\ 185handler: ;\ 186 /* r1, EPCR, ESR already saved */ ;\ 187 l.sw PT_GPR2(r1),r2 ;\ 188 l.sw PT_GPR3(r1),r3 ;\ 189 l.sw PT_GPR5(r1),r5 ;\ 190 l.sw PT_GPR6(r1),r6 ;\ 191 l.sw PT_GPR7(r1),r7 ;\ 192 l.sw PT_GPR8(r1),r8 ;\ 193 l.sw PT_GPR9(r1),r9 ;\ 194 /* r10 already saved */ ;\ 195 l.sw PT_GPR11(r1),r11 ;\ 196 /* r12 already saved */ ;\ 197 l.sw PT_GPR13(r1),r13 ;\ 198 l.sw PT_GPR14(r1),r14 ;\ 199 l.sw PT_GPR15(r1),r15 ;\ 200 l.sw PT_GPR16(r1),r16 ;\ 201 l.sw PT_GPR17(r1),r17 ;\ 202 l.sw PT_GPR18(r1),r18 ;\ 203 l.sw PT_GPR19(r1),r19 ;\ 204 l.sw PT_GPR20(r1),r20 ;\ 205 l.sw PT_GPR21(r1),r21 ;\ 206 l.sw PT_GPR22(r1),r22 ;\ 207 l.sw PT_GPR23(r1),r23 ;\ 208 l.sw PT_GPR24(r1),r24 ;\ 209 l.sw PT_GPR25(r1),r25 ;\ 210 l.sw PT_GPR26(r1),r26 ;\ 211 l.sw PT_GPR27(r1),r27 ;\ 212 l.sw PT_GPR28(r1),r28 ;\ 213 l.sw PT_GPR29(r1),r29 ;\ 214 /* r31 already saved */ ;\ 215 l.sw PT_GPR30(r1),r30 ;\ 216/* l.sw PT_GPR31(r1),r31 */ ;\ 217 /* Store -1 in orig_gpr11 for non-syscall exceptions */ ;\ 218 l.addi r30,r0,-1 ;\ 219 l.sw PT_ORIG_GPR11(r1),r30 ;\ 220 l.addi r3,r1,0 ;\ 221 /* r4 is exception EA */ ;\ 222 l.addi r5,r0,vector ;\ 223 l.jal unhandled_exception ;\ 224 l.nop ;\ 225 l.j _ret_from_exception ;\ 226 l.nop 227 228/* clobbers 'reg' */ 229#define CLEAR_LWA_FLAG(reg) \ 230 l.movhi reg,hi(lwa_flag) ;\ 231 l.ori reg,reg,lo(lwa_flag) ;\ 232 l.sw 0(reg),r0 233/* 234 * NOTE: one should never assume that SPR_EPC, SPR_ESR, SPR_EEAR 235 * contain the same values as when exception we're handling 236 * occured. in fact they never do. if you need them use 237 * values saved on stack (for SPR_EPC, SPR_ESR) or content 238 * of r4 (for SPR_EEAR). for details look at EXCEPTION_HANDLE() 239 * in 'arch/openrisc/kernel/head.S' 240 */ 241 242/* =====================================================[ exceptions] === */ 243 244/* ---[ 0x100: RESET exception ]----------------------------------------- */ 245 246EXCEPTION_ENTRY(_tng_kernel_start) 247 l.jal _start 248 l.andi r0,r0,0 249 250/* ---[ 0x200: BUS exception ]------------------------------------------- */ 251 252EXCEPTION_ENTRY(_bus_fault_handler) 253 CLEAR_LWA_FLAG(r3) 254 /* r4: EA of fault (set by EXCEPTION_HANDLE) */ 255 l.jal do_bus_fault 256 l.addi r3,r1,0 /* pt_regs */ 257 258 l.j _ret_from_exception 259 l.nop 260 261/* ---[ 0x300: Data Page Fault exception ]------------------------------- */ 262EXCEPTION_ENTRY(_dtlb_miss_page_fault_handler) 263 CLEAR_LWA_FLAG(r3) 264 l.and r5,r5,r0 265 l.j 1f 266 l.nop 267 268EXCEPTION_ENTRY(_data_page_fault_handler) 269 CLEAR_LWA_FLAG(r3) 270 /* set up parameters for do_page_fault */ 271 l.ori r5,r0,0x300 // exception vector 2721: 273 l.addi r3,r1,0 // pt_regs 274 /* r4 set be EXCEPTION_HANDLE */ // effective address of fault 275 276#ifdef CONFIG_OPENRISC_NO_SPR_SR_DSX 277 l.lwz r6,PT_PC(r3) // address of an offending insn 278 l.lwz r6,0(r6) // instruction that caused pf 279 280 l.srli r6,r6,26 // check opcode for jump insn 281 l.sfeqi r6,0 // l.j 282 l.bf 8f 283 l.sfeqi r6,1 // l.jal 284 l.bf 8f 285 l.sfeqi r6,3 // l.bnf 286 l.bf 8f 287 l.sfeqi r6,4 // l.bf 288 l.bf 8f 289 l.sfeqi r6,0x11 // l.jr 290 l.bf 8f 291 l.sfeqi r6,0x12 // l.jalr 292 l.bf 8f 293 l.nop 294 295 l.j 9f 296 l.nop 297 2988: // offending insn is in delay slot 299 l.lwz r6,PT_PC(r3) // address of an offending insn 300 l.addi r6,r6,4 301 l.lwz r6,0(r6) // instruction that caused pf 302 l.srli r6,r6,26 // get opcode 3039: // offending instruction opcode loaded in r6 304 305#else 306 307 l.mfspr r6,r0,SPR_SR // SR 308 l.andi r6,r6,SPR_SR_DSX // check for delay slot exception 309 l.sfne r6,r0 // exception happened in delay slot 310 l.bnf 7f 311 l.lwz r6,PT_PC(r3) // address of an offending insn 312 313 l.addi r6,r6,4 // offending insn is in delay slot 3147: 315 l.lwz r6,0(r6) // instruction that caused pf 316 l.srli r6,r6,26 // check opcode for write access 317#endif 318 319 l.sfgeui r6,0x33 // check opcode for write access 320 l.bnf 1f 321 l.sfleui r6,0x37 322 l.bnf 1f 323 l.ori r6,r0,0x1 // write access 324 l.j 2f 325 l.nop 3261: l.ori r6,r0,0x0 // !write access 3272: 328 329 /* call fault.c handler in openrisc/mm/fault.c */ 330 l.jal do_page_fault 331 l.nop 332 l.j _ret_from_exception 333 l.nop 334 335/* ---[ 0x400: Insn Page Fault exception ]------------------------------- */ 336EXCEPTION_ENTRY(_itlb_miss_page_fault_handler) 337 CLEAR_LWA_FLAG(r3) 338 l.and r5,r5,r0 339 l.j 1f 340 l.nop 341 342EXCEPTION_ENTRY(_insn_page_fault_handler) 343 CLEAR_LWA_FLAG(r3) 344 /* set up parameters for do_page_fault */ 345 l.ori r5,r0,0x400 // exception vector 3461: 347 l.addi r3,r1,0 // pt_regs 348 /* r4 set be EXCEPTION_HANDLE */ // effective address of fault 349 l.ori r6,r0,0x0 // !write access 350 351 /* call fault.c handler in openrisc/mm/fault.c */ 352 l.jal do_page_fault 353 l.nop 354 l.j _ret_from_exception 355 l.nop 356 357 358/* ---[ 0x500: Timer exception ]----------------------------------------- */ 359 360EXCEPTION_ENTRY(_timer_handler) 361 CLEAR_LWA_FLAG(r3) 362 l.jal timer_interrupt 363 l.addi r3,r1,0 /* pt_regs */ 364 365 l.j _ret_from_intr 366 l.nop 367 368/* ---[ 0x600: Alignment exception ]-------------------------------------- */ 369 370EXCEPTION_ENTRY(_alignment_handler) 371 CLEAR_LWA_FLAG(r3) 372 /* r4: EA of fault (set by EXCEPTION_HANDLE) */ 373 l.jal do_unaligned_access 374 l.addi r3,r1,0 /* pt_regs */ 375 376 l.j _ret_from_exception 377 l.nop 378 379#if 0 380EXCEPTION_ENTRY(_alignment_handler) 381// l.mfspr r2,r0,SPR_EEAR_BASE /* Load the effective address */ 382 l.addi r2,r4,0 383// l.mfspr r5,r0,SPR_EPCR_BASE /* Load the insn address */ 384 l.lwz r5,PT_PC(r1) 385 386 l.lwz r3,0(r5) /* Load insn */ 387 l.srli r4,r3,26 /* Shift left to get the insn opcode */ 388 389 l.sfeqi r4,0x00 /* Check if the load/store insn is in delay slot */ 390 l.bf jmp 391 l.sfeqi r4,0x01 392 l.bf jmp 393 l.sfeqi r4,0x03 394 l.bf jmp 395 l.sfeqi r4,0x04 396 l.bf jmp 397 l.sfeqi r4,0x11 398 l.bf jr 399 l.sfeqi r4,0x12 400 l.bf jr 401 l.nop 402 l.j 1f 403 l.addi r5,r5,4 /* Increment PC to get return insn address */ 404 405jmp: 406 l.slli r4,r3,6 /* Get the signed extended jump length */ 407 l.srai r4,r4,4 408 409 l.lwz r3,4(r5) /* Load the real load/store insn */ 410 411 l.add r5,r5,r4 /* Calculate jump target address */ 412 413 l.j 1f 414 l.srli r4,r3,26 /* Shift left to get the insn opcode */ 415 416jr: 417 l.slli r4,r3,9 /* Shift to get the reg nb */ 418 l.andi r4,r4,0x7c 419 420 l.lwz r3,4(r5) /* Load the real load/store insn */ 421 422 l.add r4,r4,r1 /* Load the jump register value from the stack */ 423 l.lwz r5,0(r4) 424 425 l.srli r4,r3,26 /* Shift left to get the insn opcode */ 426 427 4281: 429// l.mtspr r0,r5,SPR_EPCR_BASE 430 l.sw PT_PC(r1),r5 431 432 l.sfeqi r4,0x26 433 l.bf lhs 434 l.sfeqi r4,0x25 435 l.bf lhz 436 l.sfeqi r4,0x22 437 l.bf lws 438 l.sfeqi r4,0x21 439 l.bf lwz 440 l.sfeqi r4,0x37 441 l.bf sh 442 l.sfeqi r4,0x35 443 l.bf sw 444 l.nop 445 4461: l.j 1b /* I don't know what to do */ 447 l.nop 448 449lhs: l.lbs r5,0(r2) 450 l.slli r5,r5,8 451 l.lbz r6,1(r2) 452 l.or r5,r5,r6 453 l.srli r4,r3,19 454 l.andi r4,r4,0x7c 455 l.add r4,r4,r1 456 l.j align_end 457 l.sw 0(r4),r5 458 459lhz: l.lbz r5,0(r2) 460 l.slli r5,r5,8 461 l.lbz r6,1(r2) 462 l.or r5,r5,r6 463 l.srli r4,r3,19 464 l.andi r4,r4,0x7c 465 l.add r4,r4,r1 466 l.j align_end 467 l.sw 0(r4),r5 468 469lws: l.lbs r5,0(r2) 470 l.slli r5,r5,24 471 l.lbz r6,1(r2) 472 l.slli r6,r6,16 473 l.or r5,r5,r6 474 l.lbz r6,2(r2) 475 l.slli r6,r6,8 476 l.or r5,r5,r6 477 l.lbz r6,3(r2) 478 l.or r5,r5,r6 479 l.srli r4,r3,19 480 l.andi r4,r4,0x7c 481 l.add r4,r4,r1 482 l.j align_end 483 l.sw 0(r4),r5 484 485lwz: l.lbz r5,0(r2) 486 l.slli r5,r5,24 487 l.lbz r6,1(r2) 488 l.slli r6,r6,16 489 l.or r5,r5,r6 490 l.lbz r6,2(r2) 491 l.slli r6,r6,8 492 l.or r5,r5,r6 493 l.lbz r6,3(r2) 494 l.or r5,r5,r6 495 l.srli r4,r3,19 496 l.andi r4,r4,0x7c 497 l.add r4,r4,r1 498 l.j align_end 499 l.sw 0(r4),r5 500 501sh: 502 l.srli r4,r3,9 503 l.andi r4,r4,0x7c 504 l.add r4,r4,r1 505 l.lwz r5,0(r4) 506 l.sb 1(r2),r5 507 l.srli r5,r5,8 508 l.j align_end 509 l.sb 0(r2),r5 510 511sw: 512 l.srli r4,r3,9 513 l.andi r4,r4,0x7c 514 l.add r4,r4,r1 515 l.lwz r5,0(r4) 516 l.sb 3(r2),r5 517 l.srli r5,r5,8 518 l.sb 2(r2),r5 519 l.srli r5,r5,8 520 l.sb 1(r2),r5 521 l.srli r5,r5,8 522 l.j align_end 523 l.sb 0(r2),r5 524 525align_end: 526 l.j _ret_from_intr 527 l.nop 528#endif 529 530/* ---[ 0x700: Illegal insn exception ]---------------------------------- */ 531 532EXCEPTION_ENTRY(_illegal_instruction_handler) 533 /* r4: EA of fault (set by EXCEPTION_HANDLE) */ 534 l.jal do_illegal_instruction 535 l.addi r3,r1,0 /* pt_regs */ 536 537 l.j _ret_from_exception 538 l.nop 539 540/* ---[ 0x800: External interrupt exception ]---------------------------- */ 541 542EXCEPTION_ENTRY(_external_irq_handler) 543#ifdef CONFIG_OPENRISC_ESR_EXCEPTION_BUG_CHECK 544 l.lwz r4,PT_SR(r1) // were interrupts enabled ? 545 l.andi r4,r4,SPR_SR_IEE 546 l.sfeqi r4,0 547 l.bnf 1f // ext irq enabled, all ok. 548 l.nop 549 550#ifdef CONFIG_PRINTK 551 l.addi r1,r1,-0x8 552 l.movhi r3,hi(42f) 553 l.ori r3,r3,lo(42f) 554 l.sw 0x0(r1),r3 555 l.jal _printk 556 l.sw 0x4(r1),r4 557 l.addi r1,r1,0x8 558 559 .section .rodata, "a" 56042: 561 .string "\n\rESR interrupt bug: in _external_irq_handler (ESR %x)\n\r" 562 .align 4 563 .previous 564#endif 565 566 l.ori r4,r4,SPR_SR_IEE // fix the bug 567// l.sw PT_SR(r1),r4 5681: 569#endif 570 CLEAR_LWA_FLAG(r3) 571 l.addi r3,r1,0 572 l.movhi r8,hi(generic_handle_arch_irq) 573 l.ori r8,r8,lo(generic_handle_arch_irq) 574 l.jalr r8 575 l.nop 576 l.j _ret_from_intr 577 l.nop 578 579/* ---[ 0x900: DTLB miss exception ]------------------------------------- */ 580 581 582/* ---[ 0xa00: ITLB miss exception ]------------------------------------- */ 583 584 585/* ---[ 0xb00: Range exception ]----------------------------------------- */ 586 587UNHANDLED_EXCEPTION(_vector_0xb00,0xb00) 588 589/* ---[ 0xc00: Syscall exception ]--------------------------------------- */ 590 591/* 592 * Syscalls are a special type of exception in that they are 593 * _explicitly_ invoked by userspace and can therefore be 594 * held to conform to the same ABI as normal functions with 595 * respect to whether registers are preserved across the call 596 * or not. 597 */ 598 599/* Upon syscall entry we just save the callee-saved registers 600 * and not the call-clobbered ones. 601 */ 602 603_string_syscall_return: 604 .string "syscall r9:0x%08x -> syscall(%ld) return %ld\0" 605 .align 4 606 607ENTRY(_sys_call_handler) 608 /* r1, EPCR, ESR a already saved */ 609 l.sw PT_GPR2(r1),r2 610 /* r3-r8 must be saved because syscall restart relies 611 * on us being able to restart the syscall args... technically 612 * they should be clobbered, otherwise 613 */ 614 l.sw PT_GPR3(r1),r3 615 /* 616 * r4 already saved 617 * r4 holds the EEAR address of the fault, use it as screatch reg and 618 * then load the original r4 619 */ 620 CLEAR_LWA_FLAG(r4) 621 l.lwz r4,PT_GPR4(r1) 622 l.sw PT_GPR5(r1),r5 623 l.sw PT_GPR6(r1),r6 624 l.sw PT_GPR7(r1),r7 625 l.sw PT_GPR8(r1),r8 626 l.sw PT_GPR9(r1),r9 627 /* r10 already saved */ 628 l.sw PT_GPR11(r1),r11 629 /* orig_gpr11 must be set for syscalls */ 630 l.sw PT_ORIG_GPR11(r1),r11 631 /* r12,r13 already saved */ 632 633 /* r14-r28 (even) aren't touched by the syscall fast path below 634 * so we don't need to save them. However, the functions that return 635 * to userspace via a call to switch() DO need to save these because 636 * switch() effectively clobbers them... saving these registers for 637 * such functions is handled in their syscall wrappers (see fork, vfork, 638 * and clone, below). 639 640 /* r30 is the only register we clobber in the fast path */ 641 /* r30 already saved */ 642/* l.sw PT_GPR30(r1),r30 */ 643 644_syscall_check_trace_enter: 645 /* syscalls run with interrupts enabled */ 646 TRACE_IRQS_ON_SYSCALL 647 ENABLE_INTERRUPTS(r29) // enable interrupts, r29 is temp 648 649 /* If TIF_SYSCALL_TRACE is set, then we want to do syscall tracing */ 650 l.lwz r30,TI_FLAGS(r10) 651 l.andi r30,r30,_TIF_SYSCALL_TRACE 652 l.sfne r30,r0 653 l.bf _syscall_trace_enter 654 l.nop 655 656_syscall_check: 657 /* Ensure that the syscall number is reasonable */ 658 l.sfgeui r11,__NR_syscalls 659 l.bf _syscall_badsys 660 l.nop 661 662_syscall_call: 663 l.movhi r29,hi(sys_call_table) 664 l.ori r29,r29,lo(sys_call_table) 665 l.slli r11,r11,2 666 l.add r29,r29,r11 667 l.lwz r29,0(r29) 668 669 l.jalr r29 670 l.nop 671 672_syscall_return: 673 /* All syscalls return here... just pay attention to ret_from_fork 674 * which does it in a round-about way. 675 */ 676 l.sw PT_GPR11(r1),r11 // save return value 677 678#if 0 679_syscall_debug: 680 l.movhi r3,hi(_string_syscall_return) 681 l.ori r3,r3,lo(_string_syscall_return) 682 l.ori r27,r0,2 683 l.sw -4(r1),r27 684 l.sw -8(r1),r11 685 l.lwz r29,PT_ORIG_GPR11(r1) 686 l.sw -12(r1),r29 687 l.lwz r29,PT_GPR9(r1) 688 l.sw -16(r1),r29 689 l.movhi r27,hi(_printk) 690 l.ori r27,r27,lo(_printk) 691 l.jalr r27 692 l.addi r1,r1,-16 693 l.addi r1,r1,16 694#endif 695#if 0 696_syscall_show_regs: 697 l.movhi r27,hi(show_registers) 698 l.ori r27,r27,lo(show_registers) 699 l.jalr r27 700 l.or r3,r1,r1 701#endif 702 703_syscall_check_trace_leave: 704 /* r30 is a callee-saved register so this should still hold the 705 * _TIF_SYSCALL_TRACE flag from _syscall_check_trace_enter above... 706 * _syscall_trace_leave expects syscall result to be in pt_regs->r11. 707 */ 708 l.sfne r30,r0 709 l.bf _syscall_trace_leave 710 l.nop 711 712/* This is where the exception-return code begins... interrupts need to be 713 * disabled the rest of the way here because we can't afford to miss any 714 * interrupts that set NEED_RESCHED or SIGNALPENDING... really true? */ 715 716_syscall_check_work: 717 /* Here we need to disable interrupts */ 718 DISABLE_INTERRUPTS(r27,r29) 719 TRACE_IRQS_OFF 720 l.lwz r30,TI_FLAGS(r10) 721 l.andi r30,r30,_TIF_WORK_MASK 722 l.sfne r30,r0 723 724 l.bnf _syscall_resume_userspace 725 l.nop 726 727 /* Work pending follows a different return path, so we need to 728 * make sure that all the call-saved registers get into pt_regs 729 * before branching... 730 */ 731 l.sw PT_GPR14(r1),r14 732 l.sw PT_GPR16(r1),r16 733 l.sw PT_GPR18(r1),r18 734 l.sw PT_GPR20(r1),r20 735 l.sw PT_GPR22(r1),r22 736 l.sw PT_GPR24(r1),r24 737 l.sw PT_GPR26(r1),r26 738 l.sw PT_GPR28(r1),r28 739 740 /* _work_pending needs to be called with interrupts disabled */ 741 l.j _work_pending 742 l.nop 743 744_syscall_resume_userspace: 745// ENABLE_INTERRUPTS(r29) 746 747 748/* This is the hot path for returning to userspace from a syscall. If there's 749 * work to be done and the branch to _work_pending was taken above, then the 750 * return to userspace will be done via the normal exception return path... 751 * that path restores _all_ registers and will overwrite the "clobbered" 752 * registers with whatever garbage is in pt_regs -- that's OK because those 753 * registers are clobbered anyway and because the extra work is insignificant 754 * in the context of the extra work that _work_pending is doing. 755 756/* Once again, syscalls are special and only guarantee to preserve the 757 * same registers as a normal function call */ 758 759/* The assumption here is that the registers r14-r28 (even) are untouched and 760 * don't need to be restored... be sure that that's really the case! 761 */ 762 763/* This is still too much... we should only be restoring what we actually 764 * clobbered... we should even be using 'scratch' (odd) regs above so that 765 * we don't need to restore anything, hardly... 766 */ 767 768 l.lwz r2,PT_GPR2(r1) 769 770 /* Restore args */ 771 /* r3-r8 are technically clobbered, but syscall restart needs these 772 * to be restored... 773 */ 774 l.lwz r3,PT_GPR3(r1) 775 l.lwz r4,PT_GPR4(r1) 776 l.lwz r5,PT_GPR5(r1) 777 l.lwz r6,PT_GPR6(r1) 778 l.lwz r7,PT_GPR7(r1) 779 l.lwz r8,PT_GPR8(r1) 780 781 l.lwz r9,PT_GPR9(r1) 782 l.lwz r10,PT_GPR10(r1) 783 l.lwz r11,PT_GPR11(r1) 784 785 /* r30 is the only register we clobber in the fast path */ 786 l.lwz r30,PT_GPR30(r1) 787 788 /* Here we use r13-r19 (odd) as scratch regs */ 789 l.lwz r13,PT_PC(r1) 790 l.lwz r15,PT_SR(r1) 791 l.lwz r1,PT_SP(r1) 792 /* Interrupts need to be disabled for setting EPCR and ESR 793 * so that another interrupt doesn't come in here and clobber 794 * them before we can use them for our l.rfe */ 795 DISABLE_INTERRUPTS(r17,r19) 796 l.mtspr r0,r13,SPR_EPCR_BASE 797 l.mtspr r0,r15,SPR_ESR_BASE 798 l.rfe 799 800/* End of hot path! 801 * Keep the below tracing and error handling out of the hot path... 802*/ 803 804_syscall_trace_enter: 805 /* Here we pass pt_regs to do_syscall_trace_enter. Make sure 806 * that function is really getting all the info it needs as 807 * pt_regs isn't a complete set of userspace regs, just the 808 * ones relevant to the syscall... 809 * 810 * Note use of delay slot for setting argument. 811 */ 812 l.jal do_syscall_trace_enter 813 l.addi r3,r1,0 814 815 /* Restore arguments (not preserved across do_syscall_trace_enter) 816 * so that we can do the syscall for real and return to the syscall 817 * hot path. 818 */ 819 l.lwz r11,PT_GPR11(r1) 820 l.lwz r3,PT_GPR3(r1) 821 l.lwz r4,PT_GPR4(r1) 822 l.lwz r5,PT_GPR5(r1) 823 l.lwz r6,PT_GPR6(r1) 824 l.lwz r7,PT_GPR7(r1) 825 826 l.j _syscall_check 827 l.lwz r8,PT_GPR8(r1) 828 829_syscall_trace_leave: 830 l.jal do_syscall_trace_leave 831 l.addi r3,r1,0 832 833 l.j _syscall_check_work 834 l.nop 835 836_syscall_badsys: 837 /* Here we effectively pretend to have executed an imaginary 838 * syscall that returns -ENOSYS and then return to the regular 839 * syscall hot path. 840 * Note that "return value" is set in the delay slot... 841 */ 842 l.j _syscall_return 843 l.addi r11,r0,-ENOSYS 844 845/******* END SYSCALL HANDLING *******/ 846 847/* ---[ 0xd00: Trap exception ]------------------------------------------ */ 848 849UNHANDLED_EXCEPTION(_vector_0xd00,0xd00) 850 851/* ---[ 0xe00: Trap exception ]------------------------------------------ */ 852 853EXCEPTION_ENTRY(_trap_handler) 854 CLEAR_LWA_FLAG(r3) 855 /* r4: EA of fault (set by EXCEPTION_HANDLE) */ 856 l.jal do_trap 857 l.addi r3,r1,0 /* pt_regs */ 858 859 l.j _ret_from_exception 860 l.nop 861 862/* ---[ 0xf00: Reserved exception ]-------------------------------------- */ 863 864UNHANDLED_EXCEPTION(_vector_0xf00,0xf00) 865 866/* ---[ 0x1000: Reserved exception ]------------------------------------- */ 867 868UNHANDLED_EXCEPTION(_vector_0x1000,0x1000) 869 870/* ---[ 0x1100: Reserved exception ]------------------------------------- */ 871 872UNHANDLED_EXCEPTION(_vector_0x1100,0x1100) 873 874/* ---[ 0x1200: Reserved exception ]------------------------------------- */ 875 876UNHANDLED_EXCEPTION(_vector_0x1200,0x1200) 877 878/* ---[ 0x1300: Reserved exception ]------------------------------------- */ 879 880UNHANDLED_EXCEPTION(_vector_0x1300,0x1300) 881 882/* ---[ 0x1400: Reserved exception ]------------------------------------- */ 883 884UNHANDLED_EXCEPTION(_vector_0x1400,0x1400) 885 886/* ---[ 0x1500: Reserved exception ]------------------------------------- */ 887 888UNHANDLED_EXCEPTION(_vector_0x1500,0x1500) 889 890/* ---[ 0x1600: Reserved exception ]------------------------------------- */ 891 892UNHANDLED_EXCEPTION(_vector_0x1600,0x1600) 893 894/* ---[ 0x1700: Reserved exception ]------------------------------------- */ 895 896UNHANDLED_EXCEPTION(_vector_0x1700,0x1700) 897 898/* ---[ 0x1800: Reserved exception ]------------------------------------- */ 899 900UNHANDLED_EXCEPTION(_vector_0x1800,0x1800) 901 902/* ---[ 0x1900: Reserved exception ]------------------------------------- */ 903 904UNHANDLED_EXCEPTION(_vector_0x1900,0x1900) 905 906/* ---[ 0x1a00: Reserved exception ]------------------------------------- */ 907 908UNHANDLED_EXCEPTION(_vector_0x1a00,0x1a00) 909 910/* ---[ 0x1b00: Reserved exception ]------------------------------------- */ 911 912UNHANDLED_EXCEPTION(_vector_0x1b00,0x1b00) 913 914/* ---[ 0x1c00: Reserved exception ]------------------------------------- */ 915 916UNHANDLED_EXCEPTION(_vector_0x1c00,0x1c00) 917 918/* ---[ 0x1d00: Reserved exception ]------------------------------------- */ 919 920UNHANDLED_EXCEPTION(_vector_0x1d00,0x1d00) 921 922/* ---[ 0x1e00: Reserved exception ]------------------------------------- */ 923 924UNHANDLED_EXCEPTION(_vector_0x1e00,0x1e00) 925 926/* ---[ 0x1f00: Reserved exception ]------------------------------------- */ 927 928UNHANDLED_EXCEPTION(_vector_0x1f00,0x1f00) 929 930/* ========================================================[ return ] === */ 931 932_resume_userspace: 933 DISABLE_INTERRUPTS(r3,r4) 934 TRACE_IRQS_OFF 935 l.lwz r4,TI_FLAGS(r10) 936 l.andi r13,r4,_TIF_WORK_MASK 937 l.sfeqi r13,0 938 l.bf _restore_all 939 l.nop 940 941_work_pending: 942 l.lwz r5,PT_ORIG_GPR11(r1) 943 l.sfltsi r5,0 944 l.bnf 1f 945 l.nop 946 l.andi r5,r5,0 9471: 948 l.jal do_work_pending 949 l.ori r3,r1,0 /* pt_regs */ 950 951 l.sfeqi r11,0 952 l.bf _restore_all 953 l.nop 954 l.sfltsi r11,0 955 l.bnf 1f 956 l.nop 957 l.and r11,r11,r0 958 l.ori r11,r11,__NR_restart_syscall 959 l.j _syscall_check_trace_enter 960 l.nop 9611: 962 l.lwz r11,PT_ORIG_GPR11(r1) 963 /* Restore arg registers */ 964 l.lwz r3,PT_GPR3(r1) 965 l.lwz r4,PT_GPR4(r1) 966 l.lwz r5,PT_GPR5(r1) 967 l.lwz r6,PT_GPR6(r1) 968 l.lwz r7,PT_GPR7(r1) 969 l.j _syscall_check_trace_enter 970 l.lwz r8,PT_GPR8(r1) 971 972_restore_all: 973#ifdef CONFIG_TRACE_IRQFLAGS 974 l.lwz r4,PT_SR(r1) 975 l.andi r3,r4,(SPR_SR_IEE|SPR_SR_TEE) 976 l.sfeq r3,r0 /* skip trace if irqs were off */ 977 l.bf skip_hardirqs_on 978 l.nop 979 TRACE_IRQS_ON 980skip_hardirqs_on: 981#endif 982 RESTORE_ALL 983 /* This returns to userspace code */ 984 985 986ENTRY(_ret_from_intr) 987ENTRY(_ret_from_exception) 988 l.lwz r4,PT_SR(r1) 989 l.andi r3,r4,SPR_SR_SM 990 l.sfeqi r3,0 991 l.bnf _restore_all 992 l.nop 993 l.j _resume_userspace 994 l.nop 995 996ENTRY(ret_from_fork) 997 l.jal schedule_tail 998 l.nop 999 1000 /* Check if we are a kernel thread */ 1001 l.sfeqi r20,0 1002 l.bf 1f 1003 l.nop 1004 1005 /* ...we are a kernel thread so invoke the requested callback */ 1006 l.jalr r20 1007 l.or r3,r22,r0 1008 10091: 1010 /* _syscall_returns expect r11 to contain return value */ 1011 l.lwz r11,PT_GPR11(r1) 1012 1013 /* The syscall fast path return expects call-saved registers 1014 * r14-r28 to be untouched, so we restore them here as they 1015 * will have been effectively clobbered when arriving here 1016 * via the call to switch() 1017 */ 1018 l.lwz r14,PT_GPR14(r1) 1019 l.lwz r16,PT_GPR16(r1) 1020 l.lwz r18,PT_GPR18(r1) 1021 l.lwz r20,PT_GPR20(r1) 1022 l.lwz r22,PT_GPR22(r1) 1023 l.lwz r24,PT_GPR24(r1) 1024 l.lwz r26,PT_GPR26(r1) 1025 l.lwz r28,PT_GPR28(r1) 1026 1027 l.j _syscall_return 1028 l.nop 1029 1030/* ========================================================[ switch ] === */ 1031 1032/* 1033 * This routine switches between two different tasks. The process 1034 * state of one is saved on its kernel stack. Then the state 1035 * of the other is restored from its kernel stack. The memory 1036 * management hardware is updated to the second process's state. 1037 * Finally, we can return to the second process, via the 'return'. 1038 * 1039 * Note: there are two ways to get to the "going out" portion 1040 * of this code; either by coming in via the entry (_switch) 1041 * or via "fork" which must set up an environment equivalent 1042 * to the "_switch" path. If you change this (or in particular, the 1043 * SAVE_REGS macro), you'll have to change the fork code also. 1044 */ 1045 1046 1047/* _switch MUST never lay on page boundry, cause it runs from 1048 * effective addresses and beeing interrupted by iTLB miss would kill it. 1049 * dTLB miss seems to never accour in the bad place since data accesses 1050 * are from task structures which are always page aligned. 1051 * 1052 * The problem happens in RESTORE_ALL where we first set the EPCR 1053 * register, then load the previous register values and only at the end call 1054 * the l.rfe instruction. If get TLB miss in beetwen the EPCR register gets 1055 * garbled and we end up calling l.rfe with the wrong EPCR. (same probably 1056 * holds for ESR) 1057 * 1058 * To avoid this problems it is sufficient to align _switch to 1059 * some nice round number smaller than it's size... 1060 */ 1061 1062/* ABI rules apply here... we either enter _switch via schedule() or via 1063 * an imaginary call to which we shall return at return_from_fork. Either 1064 * way, we are a function call and only need to preserve the callee-saved 1065 * registers when we return. As such, we don't need to save the registers 1066 * on the stack that we won't be returning as they were... 1067 */ 1068 1069 .align 0x400 1070ENTRY(_switch) 1071 /* We don't store SR as _switch only gets called in a context where 1072 * the SR will be the same going in and coming out... */ 1073 1074 /* Set up new pt_regs struct for saving task state */ 1075 l.addi r1,r1,-(INT_FRAME_SIZE) 1076 1077 /* No need to store r1/PT_SP as it goes into KSP below */ 1078 l.sw PT_GPR2(r1),r2 1079 l.sw PT_GPR9(r1),r9 1080 1081 /* Save callee-saved registers to the new pt_regs */ 1082 l.sw PT_GPR14(r1),r14 1083 l.sw PT_GPR16(r1),r16 1084 l.sw PT_GPR18(r1),r18 1085 l.sw PT_GPR20(r1),r20 1086 l.sw PT_GPR22(r1),r22 1087 l.sw PT_GPR24(r1),r24 1088 l.sw PT_GPR26(r1),r26 1089 l.sw PT_GPR28(r1),r28 1090 l.sw PT_GPR30(r1),r30 1091 1092 l.addi r11,r10,0 /* Save old 'current' to 'last' return value*/ 1093 1094 /* We use thread_info->ksp for storing the address of the above 1095 * structure so that we can get back to it later... we don't want 1096 * to lose the value of thread_info->ksp, though, so store it as 1097 * pt_regs->sp so that we can easily restore it when we are made 1098 * live again... 1099 */ 1100 1101 /* Save the old value of thread_info->ksp as pt_regs->sp */ 1102 l.lwz r29,TI_KSP(r10) 1103 l.sw PT_SP(r1),r29 1104 1105 /* Swap kernel stack pointers */ 1106 l.sw TI_KSP(r10),r1 /* Save old stack pointer */ 1107 l.or r10,r4,r0 /* Set up new current_thread_info */ 1108 l.lwz r1,TI_KSP(r10) /* Load new stack pointer */ 1109 1110 /* Restore the old value of thread_info->ksp */ 1111 l.lwz r29,PT_SP(r1) 1112 l.sw TI_KSP(r10),r29 1113 1114 /* ...and restore the registers, except r11 because the return value 1115 * has already been set above. 1116 */ 1117 l.lwz r2,PT_GPR2(r1) 1118 l.lwz r9,PT_GPR9(r1) 1119 /* No need to restore r10 */ 1120 /* ...and do not restore r11 */ 1121 1122 /* Restore callee-saved registers */ 1123 l.lwz r14,PT_GPR14(r1) 1124 l.lwz r16,PT_GPR16(r1) 1125 l.lwz r18,PT_GPR18(r1) 1126 l.lwz r20,PT_GPR20(r1) 1127 l.lwz r22,PT_GPR22(r1) 1128 l.lwz r24,PT_GPR24(r1) 1129 l.lwz r26,PT_GPR26(r1) 1130 l.lwz r28,PT_GPR28(r1) 1131 l.lwz r30,PT_GPR30(r1) 1132 1133 /* Unwind stack to pre-switch state */ 1134 l.addi r1,r1,(INT_FRAME_SIZE) 1135 1136 /* Return via the link-register back to where we 'came from', where 1137 * that may be either schedule(), ret_from_fork(), or 1138 * ret_from_kernel_thread(). If we are returning to a new thread, 1139 * we are expected to have set up the arg to schedule_tail already, 1140 * hence we do so here unconditionally: 1141 */ 1142 l.lwz r3,TI_TASK(r3) /* Load 'prev' as schedule_tail arg */ 1143 l.jr r9 1144 l.nop 1145 1146/* ==================================================================== */ 1147 1148/* These all use the delay slot for setting the argument register, so the 1149 * jump is always happening after the l.addi instruction. 1150 * 1151 * These are all just wrappers that don't touch the link-register r9, so the 1152 * return from the "real" syscall function will return back to the syscall 1153 * code that did the l.jal that brought us here. 1154 */ 1155 1156/* fork requires that we save all the callee-saved registers because they 1157 * are all effectively clobbered by the call to _switch. Here we store 1158 * all the registers that aren't touched by the syscall fast path and thus 1159 * weren't saved there. 1160 */ 1161 1162_fork_save_extra_regs_and_call: 1163 l.sw PT_GPR14(r1),r14 1164 l.sw PT_GPR16(r1),r16 1165 l.sw PT_GPR18(r1),r18 1166 l.sw PT_GPR20(r1),r20 1167 l.sw PT_GPR22(r1),r22 1168 l.sw PT_GPR24(r1),r24 1169 l.sw PT_GPR26(r1),r26 1170 l.jr r29 1171 l.sw PT_GPR28(r1),r28 1172 1173ENTRY(__sys_clone) 1174 l.movhi r29,hi(sys_clone) 1175 l.j _fork_save_extra_regs_and_call 1176 l.ori r29,r29,lo(sys_clone) 1177 1178ENTRY(__sys_clone3) 1179 l.movhi r29,hi(sys_clone3) 1180 l.j _fork_save_extra_regs_and_call 1181 l.ori r29,r29,lo(sys_clone3) 1182 1183ENTRY(__sys_fork) 1184 l.movhi r29,hi(sys_fork) 1185 l.j _fork_save_extra_regs_and_call 1186 l.ori r29,r29,lo(sys_fork) 1187 1188ENTRY(sys_rt_sigreturn) 1189 l.jal _sys_rt_sigreturn 1190 l.addi r3,r1,0 1191 l.sfne r30,r0 1192 l.bnf _no_syscall_trace 1193 l.nop 1194 l.jal do_syscall_trace_leave 1195 l.addi r3,r1,0 1196_no_syscall_trace: 1197 l.j _resume_userspace 1198 l.nop 1199 1200/* This is a catch-all syscall for atomic instructions for the OpenRISC 1000. 1201 * The functions takes a variable number of parameters depending on which 1202 * particular flavour of atomic you want... parameter 1 is a flag identifying 1203 * the atomic in question. Currently, this function implements the 1204 * following variants: 1205 * 1206 * XCHG: 1207 * @flag: 1 1208 * @ptr1: 1209 * @ptr2: 1210 * Atomically exchange the values in pointers 1 and 2. 1211 * 1212 */ 1213 1214ENTRY(sys_or1k_atomic) 1215 /* FIXME: This ignores r3 and always does an XCHG */ 1216 DISABLE_INTERRUPTS(r17,r19) 1217 l.lwz r29,0(r4) 1218 l.lwz r27,0(r5) 1219 l.sw 0(r4),r27 1220 l.sw 0(r5),r29 1221 ENABLE_INTERRUPTS(r17) 1222 l.jr r9 1223 l.or r11,r0,r0 1224 1225/* ============================================================[ EOF ]=== */