p1020si-post.dtsi (5044B)
1/* 2 * P1020/P1011 Silicon/SoC Device Tree Source (post include) 3 * 4 * Copyright 2011 Freescale Semiconductor Inc. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * * Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * * Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * * Neither the name of Freescale Semiconductor nor the 14 * names of its contributors may be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * 18 * ALTERNATIVELY, this software may be distributed under the terms of the 19 * GNU General Public License ("GPL") as published by the Free Software 20 * Foundation, either version 2 of that License or (at your option) any 21 * later version. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35&lbc { 36 #address-cells = <2>; 37 #size-cells = <1>; 38 compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus"; 39 interrupts = <19 2 0 0>, 40 <16 2 0 0>; 41}; 42 43/* controller at 0x9000 */ 44&pci0 { 45 compatible = "fsl,mpc8548-pcie"; 46 device_type = "pci"; 47 #size-cells = <2>; 48 #address-cells = <3>; 49 bus-range = <0 255>; 50 clock-frequency = <33333333>; 51 interrupts = <16 2 0 0>; 52 53 pcie@0 { 54 reg = <0 0 0 0 0>; 55 #interrupt-cells = <1>; 56 #size-cells = <2>; 57 #address-cells = <3>; 58 device_type = "pci"; 59 interrupts = <16 2 0 0>; 60 interrupt-map-mask = <0xf800 0 0 7>; 61 interrupt-map = < 62 /* IDSEL 0x0 */ 63 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 64 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 65 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 66 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 67 >; 68 }; 69}; 70 71/* controller at 0xa000 */ 72&pci1 { 73 compatible = "fsl,mpc8548-pcie"; 74 device_type = "pci"; 75 #size-cells = <2>; 76 #address-cells = <3>; 77 bus-range = <0 255>; 78 clock-frequency = <33333333>; 79 interrupts = <16 2 0 0>; 80 81 pcie@0 { 82 reg = <0 0 0 0 0>; 83 #interrupt-cells = <1>; 84 #size-cells = <2>; 85 #address-cells = <3>; 86 device_type = "pci"; 87 interrupts = <16 2 0 0>; 88 interrupt-map-mask = <0xf800 0 0 7>; 89 90 interrupt-map = < 91 /* IDSEL 0x0 */ 92 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 93 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 94 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 95 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 96 >; 97 }; 98}; 99 100&soc { 101 #address-cells = <1>; 102 #size-cells = <1>; 103 device_type = "soc"; 104 compatible = "fsl,p1020-immr", "simple-bus"; 105 bus-frequency = <0>; // Filled out by uboot. 106 107 ecm-law@0 { 108 compatible = "fsl,ecm-law"; 109 reg = <0x0 0x1000>; 110 fsl,num-laws = <12>; 111 }; 112 113 ecm@1000 { 114 compatible = "fsl,p1020-ecm", "fsl,ecm"; 115 reg = <0x1000 0x1000>; 116 interrupts = <16 2 0 0>; 117 }; 118 119 memory-controller@2000 { 120 compatible = "fsl,p1020-memory-controller"; 121 reg = <0x2000 0x1000>; 122 interrupts = <16 2 0 0>; 123 }; 124 125/include/ "pq3-i2c-0.dtsi" 126/include/ "pq3-i2c-1.dtsi" 127/include/ "pq3-duart-0.dtsi" 128 129/include/ "pq3-espi-0.dtsi" 130 spi@7000 { 131 fsl,espi-num-chipselects = <4>; 132 }; 133 134/include/ "pq3-gpio-0.dtsi" 135 136 L2: l2-cache-controller@20000 { 137 compatible = "fsl,p1020-l2-cache-controller"; 138 reg = <0x20000 0x1000>; 139 cache-line-size = <32>; // 32 bytes 140 cache-size = <0x40000>; // L2,256K 141 interrupts = <16 2 0 0>; 142 }; 143 144/include/ "pq3-dma-0.dtsi" 145/include/ "pq3-usb2-dr-0.dtsi" 146 usb@22000 { 147 compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; 148 }; 149/include/ "pq3-usb2-dr-1.dtsi" 150 usb@23000 { 151 compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; 152 }; 153 154/include/ "pq3-esdhc-0.dtsi" 155 sdhc@2e000 { 156 compatible = "fsl,p1020-esdhc", "fsl,esdhc"; 157 sdhci,auto-cmd12; 158 }; 159/include/ "pq3-sec3.3-0.dtsi" 160 161/include/ "pq3-mpic.dtsi" 162/include/ "pq3-mpic-timer-B.dtsi" 163 164/include/ "pq3-etsec2-0.dtsi" 165 enet0: enet0_grp2: ethernet@b0000 { 166 }; 167 168/include/ "pq3-etsec2-1.dtsi" 169 enet1: enet1_grp2: ethernet@b1000 { 170 }; 171 172/include/ "pq3-etsec2-2.dtsi" 173 enet2: enet2_grp2: ethernet@b2000 { 174 }; 175 176 global-utilities@e0000 { 177 compatible = "fsl,p1020-guts"; 178 reg = <0xe0000 0x1000>; 179 fsl,has-rstcr; 180 }; 181}; 182 183/include/ "pq3-etsec2-grp2-0.dtsi" 184/include/ "pq3-etsec2-grp2-1.dtsi" 185/include/ "pq3-etsec2-grp2-2.dtsi"